![header thumbnail](/images/img-default-logo.png)
MIL-PRF-32405 Base Document:2013
NA
Status of Standard is Unknown
![header thumbnail](/images/img-default-logo.png)
CLEANER, HAND WIPE, FOR AVIATION AND MISSILE SYSTEMS, METALLIC SUBSTRATES, LOW OR EXEMPT VOC
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies hand wipe cleaners that do not contain hazardous air pollutants (HAP) (Clean Air Act 112(b)) and contain a low content of volatile organic compounds (VOC) or an exempt VOC (40 CFR 51.100) for use on aviation and missile systems.
Committee |
FSC 6850
|
DevelopmentNote |
NOTICE 1 - Notice of Validation. (11/2017)
|
DocumentType |
Standard
|
Pages |
28
|
PublisherName |
US Military Specs/Standards/Handbooks
|
Status |
NA
|
ASTM D 1353 : 2013 : REDLINE | Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products |
FED-STD-313 Revision D:1996 | MATERIAL SAFETY DATA, TRANSPORTATION DATA AND DISPOSAL DATA FOR HAZARDOUS MATERIALS FURNISHED TO GOVERNMENT ACTIVITIES |
SAE AMS QQ A 250/12 : 2013 | ALUMINUM ALLOY 7075, PLATE AND SHEET |
SAE AMS S 8802 : 2015 | SEALING COMPOUND, FUEL RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES |
CFR 40 PART 63, VOL. 6 OF 6 : JUL 2017 | PROTECTION OF ENVIRONMENT |
MIL-PRF-81733 Revision D:1998 | SEALING AND COATING COMPOUND, CORROSION INHIBITIVE |
CFR 40 PART 63, VOL. 4 OF 6 : JUL 2017 | PROTECTION OF ENVIRONMENT |
SAE AMS 4911 : 2014 | TITANIUM ALLOY, SHEET, STRIP, AND PLATE, 6AL - 4 V, ANNEALED |
CFR 40 PART 63, VOL. 2 OF 6 : JUL 2017 | PROTECTION OF ENVIRONMENT |
CFR 40(PTS400-424) : JUL 2017 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
SAE AMS QQ A 250/4 : 2015 | ALUMINUM ALLOY 2024, PLATE AND SHEET |
SAE AMS 6512 : 2012 | STEEL, MARAGING, BARS, FORGINGS, TUBING, AND RINGS 18NI - 7.8CO - 4.9MO - 0.40TI - 0.10AL CONSUMABLE ELECTRODE VACUUM MELTED, ANNEALED |
MIL-DTL-81381 Revision C:2005 | WIRE, ELECTRIC, POLYIMIDE-INSULATED, COPPER OR COPPER ALLOY |
MIL-PRF-23377 Revision K:2012 | PRIMER COATINGS: EPOXY, HIGH-SOLIDS |
CFR 40(PTS260-265) : JUL 2017 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
SAE AMS 2759 : 2014 | HEAT TREATMENT OF STEEL PARTS, GENERAL REQUIREMENTS |
MIL-PRF-680 Revision C:2010 | DEGREASING SOLVENT |
ASTM F 22 : 2013 : REDLINE | Standard Test Method for Hydrophobic Surface Films by the Water-Break Test |
CFR 40 PART 63, VOL. 5 OF 6 : JUL 2017 | PROTECTION OF ENVIRONMENT |
SAE AMS 5629H : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 13CR - 8.0NI - 2.2MO - 1.1AL, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
ASTM E 70 | TEST METHOD FOR PH OF AQUEOUS SOLUTIONS WITH THE GLASS ELECTRODE |
MIL-DTL-5541 Revision F:2006 | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
SAE AMS P 83310 : 2016 | PLASTIC SHEET, POLYCARBONATE, TRANSPARENT |
MIL-PRF-22750 Revision G:2011 | COATING, EPOXY, HIGH-SOLIDS |
A-A-58054 Base Document:1996 | ABRASIVE MATS, NON-WOVEN, NON-METALLIC |
SAE AMS 6359 : 2015 | STEEL, SHEET, STRIP, AND PLATE 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) |
MIL-DTL-53039 Revision E:2013 | COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
CFR 40(PTS50-51) : JUL 2017 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
MIL-PRF-81322 Revision G:2005 | GREASE, AIRCRAFT, GENERAL PURPOSE, WIDE TEMPERATURE RANGE, NATO CODE G-395 |
MIL-DTL-64159 Revision B:2011 | CAMOUFLAGE COATING, WATER DISPERSIBLE ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
SAE AMS 4377 : 2011 | MAGNESIUM ALLOY, SHEET AND PLATE, 3.0AL - 1.0ZN - 0.20MN (AZ31B-H24), COLD ROLLED, PARTIALLY ANNEALED |
CFR 40 PART 63, VOL. 1 OF 6 : JUL 2017 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
SAE AMS 5046 : 2012 | CARBON STEEL, SHEET, STRIP, AND PLATE, (SAE 1020 AND 1025) |
SAE ARP 1755 : 2000 | EFFECT OF CLEANING AGENTS ON AIRCRAFT ENGINE MATERIALS, STOCK LOSS TEST METHOD |
SAE AMS S 8840 : 1999 | STEEL SHEET AND STRIP, CORROSION-RESISTANT, PRECIPITATION HARDENING (AM350 AND AM355), PREMIUM QUALITY |
SAE AMS 3204 : 2009 | RUBBER SYNTHETIC, LOW-TEMPERATURE RESISTANT, 25 - 35 |
SAE AMS 2629 : 2017 | FLUID, JET REFERENCE |
MIL-PRF-83282 Revision D:1997 | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
SAE AMS H 6875 : 2010 | HEAT TREATMENT OF STEEL RAW MATERIALS |
CFR 40 PART 63, VOL. 3 OF 6 : JUL 2017 | PROTECTION OF ENVIRONMENT |
MIL-PRF-85582 Revision E:2012 | PRIMER COATINGS: EPOXY, WATERBORNE |
FED-STD-141 Revision D:2001 | PAINT, VARNISH, LACQUER AND RELATED MATERIALS, METHODS OF INSPECTION, SAMPLING AND TESTING |
ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
SAE AMS 3209 : 2014 | CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 65 - 75 |
ASTM D 3359 : 2017 : REDLINE | Standard Test Methods for Rating Adhesion by Tape Test |
SAE AMS M 3171 : 1998 | MAGNESIUM ALLOY, PROCESSES FOR PRETREATMENT AND PREVENTION OF CORROSION ON |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.