MIL-STD-278 Revision F:1987
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
WELDING AND CASTING STANDARD (REPLACEMENT DOCUMENT NAVSEA TECH PUB S9074-AR-GIB-010/278)
Available format(s)
PDF
Published date
26-01-1987
Publisher
Superseded date
27-05-1998
Superseded by
€16.67
Excluding VAT
Requirements for welding, casting, etc. of piping, machinery and pressure vessel components on US Navy ships.
| DocumentType |
Standard
|
| Pages |
130
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy |
| MIL V 1189 : D | VALVE, GATE, BRONZE, FLANGED ENDS, WORKING PRESSURES UP TO 400 PS [SHIPBOARD USE] |
| MIL C 24231 : D | CONNECTOR, PLUGS, RECEPTACLES, ADAPTORS, HULL INSERTS AND HULL INSERT PLUGS, PRESSURE-PROOF, GENERAL SPECIFICATION FOR |
| MIL-F-24291 Revision C:1990 | Flowmeter, Fluid Electromagnetic Type |
| MIL S 16036 : K | SWITCHGEAR, POWER, NAVAL SHIPBOARD |
| MIL-STD-1330 Revision D:1996 | Precision Cleaning and Testing of Shipboard Oxygen, Helium, Helium-Oxygen, Nitrogen, and Hydrogen Systems |
| MIL V 24569 : 0 | VALVE, QUICK CLOSING, FOR FUEL OIL AND AUXILIARY STEAM EMERGENCY SHUTDOWN |
| MIL-V-2961 Revision D:1990 | Valves, Globe, Pressure Reducing, Gas Service |
| MIL-B-17748 Revision C:1961 | Boilers, Heating, Low Pressure, Hot Water Naval Shipboard |
| MIL B 18381 : D | BOILER, STEAM, HIGH PRESSURE, NAVAL SHIP PROPULSION |
| MIL-H-18158 Revision E:1990 | Hose Ducting, Low Pressure, Naval Shipboard Portable, Ventilating Set Use |
| ASTM F 1370 : 1992 | Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard |
| MIL-H-24520 Base Document:1975 | Hose and Hose Assembly for Water Cooling of Electronic Equipment (No S/S Document) |
| MIL-U-18033 Revision F:1962 | UNDERWATER LOG EQUIPMENT, ELECTROMAGNETIC TYPE |
| DOD STD 2003/3 : 0 | ELECTRIC PLANT INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (PENETRATIONS) |
| MIL-R-24159 Revision A:1983 | Receptacle, Canister, CO2 Absorbent |
| DOD-F-24669 Base Document:1986 | FORGINGS AND FORGING STOCK, STEEL BARS, BILLETS AND BLOOMS, GENERAL SPECIFICATION FOR (METRIC) |
| MIL-STD-271 Revision F:1986 | REQUIREMENTS FOR NONDESTRUCTIVE TESTING METHODS (REPLACEMENT DOCUMENT NAVSEA TECH PUB T9074-AS-GIB-010/271) |
| MIL-T-24747 Base Document:1991 | TECHNICAL REPAIR STANDARDS (TRS) MANUAL; PREPARATION OF (S/S BY MIL-M-24784) |
| MIL-B-16907 Revision G:1988 | Boiler, Steam, High Pressure, Auxiliary Fire Tube Type, Naval Shipboard |
| MIL-A-28890 Base Document:1984 | Antenna Group, OE-207/BR (No S/S Document) |
| MIL-G-19650 Revision B:1963 | Generator Sets, Steam Turbine, Direct Drive, 2000 KW, 450 Volt, 60 Cycle A.C. (No S/S Document) |
| MIL-B-24535 Revision A:1989 | Burner, Carbon Monoxide and Hydrogen, Catalytic Type (Mark V) |
| ASTM F 1370 : 1992 : R2011 | Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard |
| ASTM F 1792 : 1997 : R2016 : EDT 1 | Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service |
| ASTM F 1387 : 1999 | Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
| MIL V 24630 : 0 | VALVES, CHECK, IN-LINE, FOR HYDRAULIC FLUID AND LUBRICATING OIL FLUID |
| MIL G 3124 : D | GENERATOR, ALTERNATING CURRENT 60-HERTZ (NAVAL SHIPBOARD USE) |
| MIL P 23928 : D | PANEL, ELECTRICAL, POWER DISTRIBUTION AND MANUAL TRANSFER, CIRCUIT BREAKER TYPE |
| MIL V 24624 : 0 | VALVE, BUTTERFLY, WAFER AND LUG STYLE, SHIPBOARD SERVICE |
| MIL-P-24589 Revision A:1992 | Proportioner Systems, Balanced Pressure, Aqueous Film-Forming Foam (AFFF) Liquid Concentrate |
| MIL A 24775 : 0 | AIR CONDITIONING FAN COIL UNITS, HORIZONTAL AND VERTICAL TYPES, NAVAL SHIPBOARD |
| MIL-G-24745 Base Document:1990 | Governors, Steam Driven Pump, Pressure Regulating, Naval Shipboard, 600 Pounds per Square Inch Steam Service (No S/S Document) |
| MIL E 17807 : C | ELEVATOR, WEAPON AND CARGO, ELECTROMECHANICAL (SHIPBOARD) |
| MIL-STD-798 Base Document:1965 | NONDESTRUCTIVE TESTING, WELDING, QUALITY CONTROL, MATERIAL CONTROL AND IDENTIFICATION AND HI-SHOCK TEST REQUIREMENTS FOR PIPING SYSTEM COMPONENTS FOR NAVAL SHIPBOARD USE |
| MIL-C-18419 Revision B:1962 | Compressors, Reciprocating, Motor Driven, Naval Shipboard High Pressure Air Service (No S/S Document) |
| MIL V 16556 : E | VALVE, SOLENOID, THREE-WAY BYPASS (NAVAL SHIPBOARD USE) |
| MIL A 23798 : C | AIR CONDITIONER, FAN-COIL ASSEMBLY |
| MIL-I-24783 Base Document:1993 | Isolator, Ring Type, Pressure, for Shipboard Sewage Service |
| MIL-P-24395 Base Document:1972 | Panels, Ground Detector, General Specification for |
| MIL I 18997/2 : 0 | INDICATOR, PRESSURE, BOURDON TUBE CIRCULAR DIAL, OXYGEN SERVICE, BLEEDER TIP (3-1/2 AND 4-1/2 INCH SIZES) |
| MIL G 16356 : D | GAGE, BOILER WATER, DIRECT READING |
| MIL H 24595 : NOTICE 2 | HOSE, WIRE REINFORCED LARGE DIAMETER WITH REUSABLE END FITTINGS FOR FLEXIBLE CONNECTIONS |
| DOD-B-24668 Base Document:1986 | Bearing Unit, Main Thrust, Submarine Propulsion Systems |
| MIL-G-22077 Revision C:1993 | Generator Sets, Gas Turbine, Direct and Alternating Current Naval Shipboard Use |
| QQ-C-390 Revision B:1983 | Copper Alloy Castings (Including Cast Bar) (S/S by ASTM, B22, B30, B61, B62, B66, B67, B148, B176, B271, B369, B427, B505, B584, B763, B770, B806, and SAE-AMS4842, AMS4845, AMS4855, AMS4860, AMS4862, AMS4890 |
| MIL-C-23961 Revision A:1965 | Compressor, High Pressure Air, 100 CFM, Naval Shipboard Service (No S/S Document) |
| MIL G 24197 : NOTICE 2 | GENERATOR SET, DIESEL ENGINE 25O KW, ALTERNATING CURRENT |
| MIL-B-16747 Revision C:1963 | Boiler, Steam, High Pressure, Water Tube Type, Auxiliary-Navy Shipboard (No S/S Document) |
| MIL-V-24740 Base Document:1990 | VALVE, SAFETY, BOILER, REMOTE PILOT OPERATED, FOR SHIPBOARD USE |
| MIL-E-23765-1 Revision E:1985 | ELECTRODES AND RODS - WELDING, BARE, SOLID AND ALLOYED CORED, ORDINARY STRENGTH AND LOW ALLOY STEEL |
| MIL-STD-276 Revision A:1992 | Impregnation of Porous Metal Castings and Powdered Metal Components |
| GG-T-321 Revision D:1977 | THERMOMETERS, SELF-INDICATING, LIQUID-IN-GLASS FOR MACHINERY AND PIPING SYSTEMS (NO S/S DOCUMENT) |
| MIL S 15083 : B | STEEL CASTING (NAVY) |
| MIL-G-18473 Revision B:1978 | Generator, Motor, and Auxiliary Equipment, Direct Current, Naval Ship Propulsion (No S/S Document) |
| MIL C 15730 : M | COOLER, FLUID, NAVAL SHIPBOARD, LUBRICATING OIL, HYDRAULIC OIL, AND FRESH WATER |
| MIL A 24533 : B | ACTUATORS, ROTARY HYDRAULIC RACK AND PINION |
| MIL-C-20159 Revision C:1985 | Copper-Nickel Alloy Castings (UNS No. C96200 and C96400) (S/S by ASTM-B369) |
| MIL-V-24439 Revision A:1984 | VALVE, OXYGEN, HELIUM AND HELIUM OXYGEN MIXTURE, HIGH PRESSURE FOR GAS SERVICES |
| MIL-B-24220 Revision A:1990 | Blocks, Tackle, Synthetic Rope (S/S by A-A-59807, A-A-59808 and A-A-59809) |
| DOD STD 2003/4 : 0 | ELECTRIC PLANT INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (CABLEWAYS) |
| MIL-T-17523 Revision D:1976 | Turbine, Steam, Auxiliary (and Reduction Gear) Mechanical Drive |
| MIL-E-24572 Revision B:1992 | Extinguisher, Fire, Bromotrifluoromethane (Halon 1301) System Components (Fixed Pipe, Pneumatically Actuated, Naval Shipboard use) |
| MIL-S-16032 Revision M:1987 | Switches and Detectors, Shipboard Alarm Systems |
| MIL L 24560 : 0 | LIGHTS AND GLASSWARE FOR NAVIGATION, SIGNAL AND WARNING, NAVAL SHIPBOARD USE, GENERAL SPECIFICATION FOR |
| MIL-STD-1627 Revision C:1994 | Bending of Pipe or Tube for Ship Piping Systems |
| MIL-P-24212 Revision C:1991 | Pressure Transducer Equipment (Electrical) |
| MIL-V-2042 Revision E:1990 | VALVES, REDUCING, WATER SERVICE FOR NAVAL SHIPBOARD USE (S/S BY ASTM-F1370) |
| MIL-B-24141 Revision A:1990 | Blocks, Tackle, Wire Rope (S/S by A-A-59985) |
| DOD-V-24675 Base Document:1986 | Valves, Boiler Blow Service, Monel, Shipboard Use |
| MIL-C-24723 Base Document:1989 | Castings, Nickel-Copper Alloy |
| MIL S 21427 : B | STRAINER, ASSEMBLIES, MAIN STREAM, HIGH PRESSURE (SIZES 4 INCHES AND ABOVE) |
| MIL-M-24144 Revision D:1988 | Monitors, Frost-Point/Dew-Point, Compressed Air, Semi-Portable (Future Acquisitions for this item may Refer to ST000-AG-IDX-010) |
| ASTM F 1387 : 1999 : R2012 | Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
| MIL F 24787 : 0 | FITTINGS, END, REUSABLE FOR FLEXIBLE HOSE ASSEMBLIES GENERAL SPECIFICATION FOR |
| MIL-V-24619 Base Document:1983 | Valve, Quick Closing,for Saturated Steam Service (No S/S Document) |
| DOD D 24599 : 0 | DISSOLVED OXYGEN MEASUREMENT SYSTEM (NAVAL SHIPBOARD USE) (METRIC) |
| MIL V 18110 : F | VALVE, GATE, CAST OR FORGED STEEL, AND ALLOY STEEL, OUTSIDE SCREW AND YOKE (SIZES 2-1/2 INCHES AND LARGER) |
| MIL-B-23401 Revision E:1989 | Burner, Carbon Monoxide and Hydrogen, Catalytic Type (Mark IV E) Naval Submarine use (No S/S Document) |
| MIL-B-24480 Revision A:1985 | Bronze, Nickel-Aluminum (UNS No. C95800) Casting for Seawater Service |
| MIL-C-24707-2 Base Document:1989 | Castings, for Pressure Containing Parts Suitable for High Temperature Service |
| MIL-DTL-85537 Revision A:1997 | TRAILER, MUNITIONS, AERO 51C |
| MIL-B-21331 Revision C:1967 | Boiler, Steam, Oiler, Steam, High Pressure, Water Tube, Forced Circulation Type, Auxillary, Naval Shipboard |
| MIL V 17547 : A | VALVES, CHECK, BRONZE (NAVY) |
| MIL-W-21965 Revision D:1988 | Water Cooling of Shipboard Electronic Equipment General Specification for (Future Acquisitions may refer to MIL-HDBK-251, MIL-HDBK-2036, DOD-STD-1399-532 and S9086-SD-STM-010/532) |
| MIL-B-2128 Revision D:1991 | BURNERS, STEAM AND OIL PRESSURE, ATOMIZING |
| MIL-C-24689 Revision B:1992 | Cobalt Alloy Castings, Wear and Corrosion Resistant |
| NAVSEA T9074 AS GIB 010/271 : 0 | REQUIREMENTS FOR NONDESTRUCTIVE TESTING METHODS |
| MIL-C-23465 Base Document:1962 | Connection, Flexible; Pipe Loops, for Steam to Main and Auxiliary Turbines (Sizes 4 and 6 Inches IPS) (No S/S Document) |
| MIL-V-17462 Revision B:1981 | Valve, Safety: Boiler (Shipboard Use) |
| MIL-A-19083 Revision C:1987 | Acoustic Devices, Minesweeping, a Mark 4(V) Mod 1 and Mark 4(V) NM (No S/S Document) |
| MIL-T-19646 Revision A:1990 | Thermometer, Gas Actuated, Remote Reading |
| MIL F 22606 : C | FLASK COMPRESSED GAS AND END PLUGS FOR AIR, OXYGEN AND NITROGEN |
| DOD C 24689 : A | COBALT ALLOY CASTINGS, WEAR AND CORROSION RESISTANT |
| MIL-F-20236 Revision D:1963 | Fittings, Tube and Pipe, Butt Welding, 300 PS1 and 775 Deg F Maximum (S/S By ANSI/ASME-B16.9) |
| MIL-T-24388 Revision C:1990 | Thermocouple and Resistance Temperature Detector Assemblies, General Specification for (Naval Shipboard) |
| ASTM F 1792 : 1997 : R2004 | Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service |
| ASTM F 1387 : 1999 : R2005 | Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
| GG I 492 : A | INDICATOR, SIGHT LIQUID |
| MIL-C-24615 Revision A:1988 | Castings, Nickel-Chromium-Molybdenum-Columbium Alloy |
| MIL V 18030 : E | VALVE, CONTROL, AIR DIAPHRAGM OPERATED (COMPLETE WITH INSTRUMENTATION |
| MIL V 23953 : C | VALVE, COMBINED VENT-CHECK FOR SUBMARINE MBT BLOW LINES (SIZES 1-1/2 TO 2-1/2 INCHES) |
| MIL-D-24304 Revision B:1988 | Differential Pressure Transducer Equipment (Electrical) (Naval Shipboard Use) |
| MIL-S-53120 Base Document:1994 | SUPPORT SYSTEM, SPECIAL DIVER\'S AIR (SDASS) (NO S/S DOCUMENT) |
| MIL-E-15330 Revision D:1977 | Expansion Joint, Pipe, Nonmetallic, Fire-Retardant (S/S by ASTM-F1123, A-A-50604, A-A-50605) |
| MIL V 24509 : A | VALVES, FLANGED, BALL & PLUG FOR SEWAGE & SEA WATER SERVICE |
| MIL-B-18558 Revision B:1988 | Bearing, Propulsion Line Shaft, Oil Disc Lubricated |
| MIL-I-24137 Base Document:1965 | Iron Castings, Nodular Graphitic (Ductile Iron) and Nodular Graphitic (Corrosion Resisting, Austenitic, Low Magnetic, Low Magnetic Permeability) (for Shipboard Application) (S/S by MIL-C-24707/5, ASTM-A395 and ASTM-A439) |
| MIL-M-24605 Revision A:1988 | Monitor, Heat Stress |
| MIL-B-1947 Revision A:1960 | BLOWER, SOOT (SHIPBOARD USE) |
| MIL-T-594 Revision B:1974 | Test Set, Armature and Stator |
| MIL-G-24260 Base Document:1967 | Generator Set, Diesel Engine, 100 KW, 120-Volt Direct Current, 1800 RPM (No S/S Document) |
| MIL-G-22665 Base Document:1960 | Generator Set, Stream Turbine, 1500-KW, 450-Volt, 60-Cycle, A.C. (No S/S Document) |
| MIL F 24202 : 0 | FITTINGS, BUTT WELDING, SEAMLESS OR WELDED, 70-30 COPPER NICKEL ALLOY, 700 PSI, 200 DEGREES F |
| MIL-I-20037 Revision B:1984 | Indicators, Sight, Liquid Level, Direct/Indirect Reading, Tubular Glass/Plastic (S/S by ASTM-F2045) |
| DOD-STD-2185 Base Document:1986 | REQUIREMENTS FOR REPAIR AND STRAIGHTENING OFBRONZE NAVAL SHIP PROPELLERS |
| MIL-T-24742 Base Document:1990 | TRANSDUCER, PRESSURE AND DIFFERENTIAL PRESSURE, MINIATURE (ELECTRICAL) (NAVAL SHIPBOARD USE) |
| MIL-A-29521 Base Document:1988 | Antenna Group, AN/BRA-34(V), AN/BRA-34A(V), AN/BRA-34B(V) (No S/S Document) |
| MIL C 15345 : G | CASTING, NONFERROUS, CENTRIFUGAL |
| MIL F 18953 : B | FAN, VANEAXIAL AND TUBEAXIAL, FIXED AND PORTABLE, VENTILATION, NAVAL SHIPBOARD |
| MIL P 24705 : A | PENETRATORS, MULTIPLE CABLE, FOR ELECTRICAL CABLES, GENERAL SPECIFICATION FOR |
| MIL-C-24707-3 Base Document:1989 | Castings, Ferrous, Corrosion-Resistant, Austenitic, Chromium-Nickel |
| ASTM F 1370 : 1992 : R2005 | Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard |
| ASTM F 1792 : 1997 | Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service |
| ASTM F 1792 : 1997 : R2010 | Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service |
| QQ-C-465 Revision A:1974 | Copper-Aluminum Alloys (Aluminum Bronze) (Copper Alloy Numbers 606, 614, 630, and 642) ; Rod, Flat Products with Finished Edges (Flat Wire, Strip,and Bar), Shapes, and Forgings(S/Sby ASTM-B124, ASTM-B150, ASTM-B169, AND ASTM-B283) |
| QQ-A-250-10 Revision E:1978 | Aluminum Alloy 5454, Plate and Sheet (See Notice 3 for Replacement Information) |
| QQ C 591 : E NOTICE 1 | COPPER SILICON, COPPER ZINC SILICON, AND COPPER NICKEL SILICON ALLOYS, ROD, WIRE, SHAPES, FORGINGS, AND FLAT PRODUCTS (FLAT WIRE, STRIP, SHEET, BAR, AND PLATE |
| MIL-T-16286 Revision E:1977 | TUBE, STEEL, SEAMLESS, MARINE BOILER APPLICATION |
| MIL S 15083 : B | STEEL CASTING (NAVY) |
| MIL-S-18729 Revision C:1965 | STEEL PLATE, SHEET, AND STRIP, ALLOY, 4130, AIRCRAFT QUALITY (S/S BY SAE-AMS6350, SAE-AMS6351 OR SAE-AMS6345) |
| MIL-STD-271 Revision F:1986 | REQUIREMENTS FOR NONDESTRUCTIVE TESTING METHODS (REPLACEMENT DOCUMENT NAVSEA TECH PUB T9074-AS-GIB-010/271) |
| MIL STD 1681 : 0 | FABRICATION, WELDING, AND INSPECTION OF HY-130 SUBMARINE HULL (ISSUE CONTROLLED REQUESTS BY OTHER THAN DOD ACTY MUST BE SUBMITTED VIA THE PREPARING ACTY OF THE STANDARD) |
| MIL-E-24403-2 Revision C:1989 | Electrodes - Welding, Flux Cored, Low-Alloy Steel |
| QQ E 450 : A | |
| MIL-E-22200-4 Revision D:1991 | Electrodes, Welding, Covered, Copper-Nickel Alloy |
| MIL F 23467 : F | FITTING AND FLANGES, WROUGHT, SEAMLESS, BUTT AND SOCKET WELDING, AUSTENITIC CORROSION RESISTANT STEEL (ISSUE CONTROLLED REQUESTS BY OTHER THAN DOD ACTYS) |
| MIL-E-22200-2 Revision D:1986 | Electrode, Welding Covered (Austenitic Chromium-Nickel Steel) |
| MIL-T-6736 Revision B:1965 | TUBING, CHROME-MOLYBDENUM, 4130 STEEL, SEAMLESS AND WELDED, AIRCRAFT QUALITY (USERS MAY REFER TO SAE-AMS-T-6736) AS A POSSIBLE REPLACEMENT) |
| ASTM E 446 : 2015 : REDLINE | Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness |
| MIL STD 248 : D | WELDING AND BRAZING PROCEDURE AND PERFORMANCE QUALIFICATION |
| MIL-F-19922 Base Document:1958 | Fluxes, Welding (Compositions), Submerged Arc Process with Type \"B\" Electrodes, Carbon and Low-Alloy Steel Application (S/S By MIL-E-23765/4) |
| ASTM E 186 : 2015 : REDLINE | Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings |
| MIL-E-23765-3 Revision A:1986 | Electrode, and Rods - Welding, Bare, Solid Copper Alloy |
| QQ-A-225 Revision G:1990 | ALUMINUM AND ALUMINUM ALLOY BAR, ROD, WIRE, OR SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED; GENERAL SPECIFICATION FOR (S/S BY ASTM-B211 AND SAE-AMS-QQ-A-225) |
| ASTM B 338 : 2017 : REDLINE | Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
| ASTM B 265 : 2015 : REDLINE | Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate |
| MIL T 23226 : E NOTICE 1 | TUBE AND PIPE, CORROSION RESISTANT STEEL, SEAMLESS |
| MIL-E-22200 Revision G:1989 | ELECTRODES, WELDING, COVERED: GENERAL SPECIFICATION FOR |
| MIL S 862 : B NOTICE 1 | |
| QQ-A-200 Revision E:1980 | Aluminum Alloy, Bar, Rod, Shapes, Structural Shapes, Tube and Wire, Extruded; General Specification for (Refer to ASTM-B241/B241M, ASTM-B221, ASTM-B308/B308M and SAE-AMS-QQ-A-200) |
| MIL S 867 : A | STEEL CASTING, CORROSION RESISTING AUSTENITIC |
| MIL-E-278 Revision B:1958 | Electrodes, Welding, Covered, Aluminum Bronze (See Notice 1 for Acquisition Information) |
| MIL-P-24338 Revision A:1985 | Pipe, Carbon Steel, Seamless |
| MIL-F-20670 Revision B:1961 | Flanges, Pipe, Carbon Steel, 150 P.S.I., W.S.P. (For Naval Shipboard Use) |
| QQ A 225/2 : D | ALUMINUM ALLOY BAR, ROD, AND WIRE, ROLLED, DRAWN, OR COLD FINISHED, 3003 |
| MIL-E-23765-1 Revision E:1985 | ELECTRODES AND RODS - WELDING, BARE, SOLID AND ALLOYED CORED, ORDINARY STRENGTH AND LOW ALLOY STEEL |
| MIL F 24342 : C (1) | FITTING AND FLANGE, WROUGHT-SEAMLESS, BUTT AND SOCKET WELDING, 70-30 COPPER NICKEL ALLOY |
| MIL-E-22200-6 Revision C:1976 | Electrodes, Welding, Mineral Covered, Low Hydrogen, Medium and High Tensile Steel (S/S by MIL-DTL-22200/1 and MIL-E-22200/10) |
| MIL S 16974 : E NOTICE 1 | STEEL BARS, BILLETS, BLOOMS AND SLABS: CARBON AND ALLOY (FOR REFORGING OR OTHER OPERATIONS BEFORE HEAT TREATMENT) |
| MIL T 23520 : C (1) | TUBE AND PIPE, NICKEL COPPER ALLOY SEAMLESS, AIR MELTED (CONTROLLED DISTRIBUTION) |
| MIL S 24412 : NOTICE 1 | STEEL, SPECIAL STRUCTURAL SHAPE, WELDABLE, HIGH TENSILE (HT), FOR SUBMARINE HULLS |
| MIL-S-23008 Revision D:1988 | Steel Castings, Alloy, High Yield Strength (HY-80 and HY-100) (See Notice 2 for Replacement Information) |
| MIL L 24128 : C | LOW CARBON CHROMIUM STEEL BARS, RODS AND FORGINGS (ISSUE CONTROLLED REQUESTS BY OTHER THAN DOD ACTIVITIES MUST BE SUBMITTED VIA THE PREPARING ACTIVITY OF THE SPEC.) |
| MIL-S-17509 Base Document:1953 | STEEL CASTINGS, AUSTENITIC, CHROMIUM-NICKEL, LOW MAGNETIC PERMEABILITY (S/S BY MIL-C-24707/3 AND ASTM-A744) |
| QQ-A-250-2 Revision E:1983 | Aluminum Alloy 3003, Plate and Sheet (See Notice 3 for Replacement Information) |
| QQ-C-390 Revision B:1983 | Copper Alloy Castings (Including Cast Bar) (S/S by ASTM, B22, B30, B61, B62, B66, B67, B148, B176, B271, B369, B427, B505, B584, B763, B770, B806, and SAE-AMS4842, AMS4845, AMS4855, AMS4860, AMS4862, AMS4890 |
| MIL-S-860 Revision B:1966 | Steel Forgings for Steam Turbine Rotors (S/S by MIL-F-24669/8) |
| ASTM E 155 : 2015 : REDLINE | Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings |
| MIL-E-24355 Revision B:1982 | Electrodes, Welding, Bare, Solid-Nickel-Manganese-Chromium-Molybdenum Alloy Steel for Producing HY-130 Weldments for As-Welded Applications (No S/S Document) |
| MIL S 18728 : D | STEEL PLATE, SHEET, AND STRIP, ALLOY, 8630, AIRCRAFT QUALITY |
| MIL-T-9046 Revision J:1983 | TITANIUM AND TITANIUM ALLOY, SHEET, STRIP AND PLATE (S/S BY SAE-AMS-T-9046) |
| DOD STD 2138 : LATEST | METAL SPRAYED COATING SYSTEMS FOR CORROSION PROTECTION ABOARD NAVAL SHIPS (METRIC) |
| MIL-E-18193 Revision B:1974 | Electrodes, Welding, Carbon Steel and Alloy Steel, Bare, Coiled (S/S by MIL-E-23765/1 and MIL-E-23765/4) |
| MIL-STD-1687 Revision A:1987 | Thermal Spray Processesfor Naval Ship Machinery Applications (S/S By T9074-AA-GIB-010/1687) |
| MIL S 23194 : J | STEEL FORGINGS, CARBON AND ALLOY |
| QQ-C-576 Revision B:1961 | Copper Flat Products with Slit and Edge-Rolled, Sheared, Sawed or Machined Edges, (Plate, Bar, Sheet, and Strip) (S/S by ASTM-B152) |
| QQ-B-637 Revision A:1967 | Brass, Naval: Rod, Wire, Shapes, Forgings, and Flat Products with Finished Edges (Bar, Flat Wire, and Strip) (S/S by Portions of ASTM-B21,and ASTM-B21M, ASTM-B124and ASTM-B283) |
| MIL F 24339 : C | FITTINGS AND FLANGES, WROUGHT, SEAMLESS, BUTT AND SOCKET WELDING CARBON STEEL (ISSUE CONTROLLED REQUESTS BY OTHER THAN DOD ACTIVITIES MUST BE SUBMITTED VIA THE PREPARING ACTIVITY OF SPEC.) |
| MIL-R-17131 Revision C:1981 | Rods and Powders, Welding, Surfacing |
| MIL-S-24238 Revision D:1987 | Steel Plate Carbon and Low Alloy |
| MIL S 23195 : D | STEEL BARS AND FORGINGS CORROSION RESISTANT |
| QQ A 225/7 : D | ALUMINUM ALLOY BAR, ROD, AND WIRE, ROLLED, DRAWN, OR COLD FINISHED 5052 |
| MIL-C-20159 Revision C:1985 | Copper-Nickel Alloy Castings (UNS No. C96200 and C96400) (S/S by ASTM-B369) |
| MIL-E-8697 Revision E:1972 | Electrodes, Welding, Covered, Low-Hydrogen, Heat-Treatable Steel (No S/S Document) |
| QQ A 250/6 : G | ALUMINUM ALLOY 5083, PLATE AND SHEET |
| MIL-E-22200-5 Revision C:1984 | Electrodes, Welding, Mineral Covered, Iron-Powder, Low-Hydrogen, Low- Alloy Steel for Hardening and Tempering Heat Treatment Applications Only (No S/S/ Document) |
| MIL-B-24480 Revision A:1985 | Bronze, Nickel-Aluminum (UNS No. C95800) Casting for Seawater Service |
| MIL S 861 : A | STEEL BARS, CORROSION RESISTING, NAVAL STEAM TURBINE PARTS US |
| MIL-T-15005 Revision F:1989 | TUBES, CONDENSER AND HEAT EXCHANGER, COPPER-NICKEL ALLOYS (UNS C70600 & C71500) |
| MIL-E-22200-9 Revision B:1982 | Electrodes, Welding, Mineral-Covered, Low-Hydrogen, Iron-Powder, Low-Hydrogen, Nickel-Manganese-Chromium-Molybdenum Alloy Steel for Producing HY-130 Weldments for AS-Welded Applications (No S/S Document) |
| MIL-E-24403 Revision A:1981 | Electrodes - Welding, Flux Cored General Specification for |
| MIL-STD-276 Revision A:1992 | Impregnation of Porous Metal Castings and Powdered Metal Components |
| MIL-I-23413 Revision C:1981 | Inserts, Welding, Filler Material, Coiled and Solid Rings |
| MIL-STD-777 Revision F:2012 | Schedule of Piping, Valves, Fittings, and Associated Piping Components for Naval Surface Ships |
| MIL C 15345 : G | CASTING, NONFERROUS, CENTRIFUGAL |
| MIL P 1144 : D NOTICE 1 | PIPE, CORROSION RESISTANT, STAINLESS STEEL, SEAMLESS OR WELDED |
| ASTM E 192 : 2015 : REDLINE | Standard Reference Radiographs of Investment Steel Castings for Aerospace Applications |
| MIL E 24403/1 : D | MILITARY SPECIFICATION - ELECTRODES - WELDING, FLUX CORED, ORDINARY STRENGTH AND LOW ALLOY STEEL |
| MIL-S-24645 Revision A:1990 | Steel Plate, Sheet, or Coil, Age-Hardening Alloy, Structural, High Yield Strength (HSLA-80 and HSLA-100) (See Notice 2 for Replacement Information) |
| QQ-S-763 Revision F:1996 | STEEL BARS, WIRE, SHAPES, AND FORGINGS; CORROSION RESISTANT (S/S BY SAE-AMS-QQ-S-763) |
| MIL-STD-1627 Revision C:1994 | Bending of Pipe or Tube for Ship Piping Systems |
| MIL-A-21180 Revision D:1984 | Aluminum-Alloy Castings, High Strength (S/S by SAE-AMS-A-21180) |
| MIL T 23227 : E (1) | TUBE AND PIPE, NICKEL-CHROMIUM-IRON ALLOY (ISSUE CONTROLLED REQUESTS BY OTHER THAN DOD ACTIVITIES MUST BE SUBMITTED VIA THE PREPARING ACTIVITY) |
| MIL-C-24615 Revision A:1988 | Castings, Nickel-Chromium-Molybdenum-Columbium Alloy |
| MIL-E-23765 Revision B:1985 | ELECTRODES AND RODS - WELDING, BARE, SOLID AND ALLOYED CORED, GENERAL SPECIFICATION FOR |
| ASTM B 209 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| MIL-E-22200-7 Revision B:1975 | Electrodes, Welding, Covered, Molybdenum Alloy Steel Application (S/S by AWS-A5.5) |
| QQ-B-639 Revision C:2016 | Brass, Naval: Flat Products |
| MIL-E-21562 Revision E:1989 | ELECTRODES AND RODS - WELDING, BARE, NICKEL ALLOY |
| WW-T-700-2 Revision E:1983 | Tube, Aluminum Alloy, Drawn, Seamless, 3003 (S/S by SAE-AMS-WW-T-700/2) |
| MIL N 24106 : C | NICKEL-COPPER ALLOY BARS, RODS AND FORGINGS |
| MIL S 23196 : C | STEEL PLATE, SHEET AND STRIP, CORROSION RESISTANT |
| MIL-STD-1689 Revision A:1990 | FABRICATION, WELDING, AND INSPECTION OF SHIPS STRUCTURE |
| MIL-STD-1688 Revision A:1990 | Fabrication, Welding and Inspection of HY-80/100 Submarine Applications (See Notice 2 for Replacement Information) |
| QQ-A-601 Revision F:1981 | Aluminum Alloy Sand Castings (S/S by ASTM-B26/B26M) |
| ASTM E 272 : 2015 : REDLINE | Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings |
| ASTM E 280 : 2015 : REDLINE | Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings |
| QQ-N-288 Base Document:1956 | Nickel-Copper Alloy and Nickel-Copper-Silicon Alloy Castings (S/S by ASTM-A494 and MIL-C-24723) |
| MIL-E-22200-3 Revision F:1986 | Electrodes, Welding, Covered, Nickel Base Alloy, and Cobalt Base Alloy |
| MIL-N-17163 Revision A:1959 | NICKEL-COPPER ALLOY, WROUGHT, (55-60 PERCENT NICKEL) LOW PERMEABILITY (NO S/S DOCUMENT) |
| MIL-W-6858 Revision D:1978 | WELDING, RESISTANCE: SPOT AND SEAM (S/S BY SAE-AMS-W-6858) |
| QQ-B-750 Base Document:1961 | Bronze, Phosphor; Bar, Plate, Rod, Sheet, Strip, Flat Wire, and Structural and Special Shaped Sections (S/S by ASTM-B139) |
| WW-P-404 Revision D:1973 | Pipe, Steel (Seamless and Welded, Black and Zinc Coated) (Galvanized) (S/S by ASTM-A53) |
| MIL-E-23765-2 Revision E:1994 | Electrodes and Rods - Welding, Bare, Solid, or Alloy Cored; and Fluxes, Low Alloy Steel (S/S by MIL-DTL-23765/1F and T9074-BC-GIB-010/0200) |
| MIL S 18410 : NOTICE 1 | |
| MIL E 22200/1 : G | ELECTRODES, WELDING, MINERAL COVERED, IRON-POWDER, LOW-HYDROGEN MEDIUM AND HIGH TENSILE STEEL, AS WELDED OR STRESS-RELIEVED WELD APPLICATION |
| ASTM E 310 : 2015 : REDLINE | Standard Reference Radiographs for Tin Bronze Castings |
| MIL-STD-1628 Base Document:1974 | Fillet Weld Size, Strength, and Efficiency Determination (See Notice 1 Cancellation for Superseding Information) |
| MIL N 23229 : B (2) | NICKEL CHROMIUM IRON ALLOY BARS AND FORGINGS |
| MIL-STD-22 Revision D:1979 | WELDED JOINT DESIGN |
| MIL T 17188 : D | TUBE, CARBON STEEL, ELECTRIC RESISTANCE WELDED, MARINE BOILER |
| MIL-B-16541 Revision B:1964 | Bronze, Valve: Castings (No S/S Document) |
| QQ-B-728 Base Document:1961 | Bronze Manganese; Rod, Shapes, Forgings, and Flat Products (Flat Wire, Strip, Sheet, Bar, and Plates) (S/S by ASTM-B138) |
| MIL-S-8699 Revision A:1957 | STEEL BARS AND FORGING STOCK (4330) VANADIUM MODIFIED, AIRCRAFT QUALITY (S/S BY SAE-AMS6411 AND SAE-AMS6427) |
| MIL-F-20236 Revision D:1963 | Fittings, Tube and Pipe, Butt Welding, 300 PS1 and 775 Deg F Maximum (S/S By ANSI/ASME-B16.9) |
| MIL T 3595 : B NOTICE 1 | TUBING, PHOSPHOR BRONZE, [CDA NO. 510] ROUND, SEAMLESS |
| MIL-S-24093 Revision A:1991 | STEEL FORGINGS, CARBON AND ALLOY HEAT TREATED |
| MIL-F-18251 Revision C:1967 | Fluxes, Welding, Submerged Arc Process Carbon and Low-Alloy Steel Application (S/S By MIL-E-23765/4) |
| MIL-S-23284 Revision A:1990 | Steel Forgings, Carbon and Alloy, for Shafts, Sleeves, Propeller Nuts, Couplings, and Stocks (Rudders and Diving Planes) |
| MIL-C-15726 Revision F:1988 | Copper-Nickel Alloy, Sheet, Plate, Strip, Bar, Rod and Wire |
| MIL N 23228 : D | NICKEL CHROMIUM IRON ALLOY PLATE, SHEET AND STRIP |
| MIL S 872 : A (1) NOTICE 1 | |
| QQ-A-200-1 Revision D:1983 | ALUMINUM ALLOY 3003, BAR, ROD, SHAPES, TUBE AND WIRE, EXTRUDED (REFER TO ASTM-B241/B241M, ASTM-B221 AND SAE-AMS-QQ-A-200/1) |
| MIL F 23509 : F (1) | FITTINGS AND FLANGES, WROUGHT, SEAMLESS BUTT AND SOCKET WELDING, NICKEL-COPPER ALLOY |
| MIL S 870 : B | STEEL CASTING, MOLYBDENUM ALLOY |
| MIL T 18165 : B | TUBE AND PIPE, CHROMIUM MOLYBDENUM ALLOY STEEL, SEAMLESS |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.