MIL-V-24439 Revision A:1984
Current
Current
The latest, up-to-date edition.
VALVE, OXYGEN, HELIUM AND HELIUM OXYGEN MIXTURE, HIGH PRESSURE FOR GAS SERVICES
Available format(s)
PDF
Published date
14-03-1984
Publisher
€16.67
Excluding VAT
Outlines types and sizes of valves for helium high pressure oxygen, and helium oxygen mixture gas services.
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
This specification describes valves for high pressure oxygen, helium, and helium oxygen mixture gas services.
| MIL-STD-777 Revision F:2012 | Schedule of Piping, Valves, Fittings, and Associated Piping Components for Naval Surface Ships |
| MIL S 15083 : B | STEEL CASTING (NAVY) |
| MIL C 15730 : M | COOLER, FLUID, NAVAL SHIPBOARD, LUBRICATING OIL, HYDRAULIC OIL, AND FRESH WATER |
| QQ-S-764 Revision B:1970 | Steel Bar, Corrosion Resisting, Free Machining (SEE ASTM A484 and ASTM A582) 080975 |
| MIL-STD-271 Revision F:1986 | REQUIREMENTS FOR NONDESTRUCTIVE TESTING METHODS (REPLACEMENT DOCUMENT NAVSEA TECH PUB T9074-AS-GIB-010/271) |
| MIL-G-2860 Revision E:1977 | Glass, Sight, Flat, Clear, Borosilicate |
| MIL M 17060 : F | MOTORS, 60-HERTZ, ALTERNATING CURRENT, INTEGRAL-HORSEPOWER, SHIPBOARD USE |
| MIL-T-16049 Revision C:1980 | Tachometers: Electrical; Self-Generating; Mechanical, Fixed Mounting and Hand Held, and Vibrating Reed |
| MIL-M-17059 Revision A:1965 | MOTOR, 60 CYCLE, ALTERNATING CURRENT, FRACTIONAL H.P. (SHIPBOARD USE) |
| MS21208 Revision B:1969 | Insert, Screw Thread, Coarse and Fine, Free Running, Helical Coil, Cres |
| QQ S 634 : LATEST | STEEL, BAR, CARBON, COLD FINISHED (STANDARD QUALITY) |
| ASTM E 186 : 2015 : REDLINE | Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings |
| MIL-G-3087 Revision C:1973 | Generator Sets, Steam Turbine (Direct and Alternating Current) (Naval Shipboard Use) |
| MIL-S-19434 Revision B:1990 | Steel Gear and Pinion Forgings, Carbon and Alloy, Heat Treated, Naval Shipboard Propulsion Unit and Auxiliary Turbine |
| MIL C 2212 : G | CONTROLLER, ELECTRIC MOTOR AC OR DC AND ASSOCIATED SWITCHING DEVICES |
| MIL-G-21410 Revision A:1991 | Governing Systems, Speed and Load-Sensing Naval Shipboard Use |
| FF-B-171 Revision B:1993 | BEARINGS, BALL, ANNULAR (GENERAL PURPOSE), METRIC (NO S/S DOCUMENT) |
| TT-L-201 Revision A:1978 | Linseed Oil, Heat Polymerized (No S/S Document) |
| MIL-G-16265 Revision F:1993 | Gaskets, Metallic-Flexible Graphite and Metallic-Asbestos, Spiral Wound (For Navy Flanged Joints in Piping Systems) |
| MIL-P-23917 Base Document:1963 | Precipitator (Electrostatic), Vent Fog, Shipboard Use |
| MIL V 20065 : D | VALVE, ANGLE, PRESSURE RELIEF, NAVAL SHIPBOARD, FOR STEAM SERVICE |
| MIL-P-19131 Base Document:1956 | Pumps, Rotary, Power Driven, Miscellaneous |
| ASME B16.11 : 2016 | FORGED FITTINGS, SOCKET-WELDING AND THREADED |
| MIL S 16974 : E NOTICE 1 | STEEL BARS, BILLETS, BLOOMS AND SLABS: CARBON AND ALLOY (FOR REFORGING OR OTHER OPERATIONS BEFORE HEAT TREATMENT) |
| QQ-C-390 Revision B:1983 | Copper Alloy Castings (Including Cast Bar) (S/S by ASTM, B22, B30, B61, B62, B66, B67, B148, B176, B271, B369, B427, B505, B584, B763, B770, B806, and SAE-AMS4842, AMS4845, AMS4855, AMS4860, AMS4862, AMS4890 |
| MS15003 Base Document:1951 | FITTINGS, LUBRICATION (HYDRAULIC) SURFACE CHECK, 1/8 PIPE THREADS, STEEL TYPE III (S/S BY SAE-AS15003) |
| MIL-S-860 Revision B:1966 | Steel Forgings for Steam Turbine Rotors (S/S by MIL-F-24669/8) |
| MIL S 1222 : H | STUD, BOLTS, HEX CAP SCREWS, SOCKET HEAD CAP SCREWS AND NUTS |
| MIL-R-17131 Revision C:1981 | Rods and Powders, Welding, Surfacing |
| MIL-STD-438 Revision E:1973 | Schedule of Piping, Valves, Fittings, & Associated Piping Components for Submarine Service |
| MIL-G-19650 Revision B:1963 | Generator Sets, Steam Turbine, Direct Drive, 2000 KW, 450 Volt, 60 Cycle A.C. (No S/S Document) |
| MIL-G-21032 Revision D:1972 | Gasket, Metallic Asbestos, Spiral Wound (S/S by MIL-G-24716 or ANSI-B16.20) |
| MIL-I-17244 Revision E:1971 | Indicators, Temperature, Direct-Reading, Bimetallic, (3 and 5 Inch Dial) |
| MIL-I-24137 Base Document:1965 | Iron Castings, Nodular Graphitic (Ductile Iron) and Nodular Graphitic (Corrosion Resisting, Austenitic, Low Magnetic, Low Magnetic Permeability) (for Shipboard Application) (S/S by MIL-C-24707/5, ASTM-A395 and ASTM-A439) |
| MIL-B-17931 Revision E:1987 | Bearing, Ball, Annular, for Quiet Operation |
| MIL L 15719 : A | LUBRICATING GREASE (HIGH-TEMPERATURE, ELECTRIC MOTOR, BALL AND ROLLER BEARINGS) |
| MIL S 861 : A | STEEL BARS, CORROSION RESISTING, NAVAL STEAM TURBINE PARTS US |
| MIL S 869 : C | STEEL BARS, BILLETS AND FORGINGS - ALLOY NITRIDING APPLICATION |
| MIL I 18997 : C (3) | INDICATOR, PRESSURE, PANEL MOUNTED OR CASE SUPPORTED, GENERAL SPECIFICATION |
| MIL-STD-777 Revision F:2012 | Schedule of Piping, Valves, Fittings, and Associated Piping Components for Naval Surface Ships |
| QQ-S-766 Revision D:1988 | Steel, Stainlessand Heat Resisting, Alloys, Plate, Sheetand Strip (S/S By ASTM-A240, ASTM-A666,and ASTM-A693) |
| MIL C 15345 : G | CASTING, NONFERROUS, CENTRIFUGAL |
| QQ-T-390 Revision A:1972 | Tin Alloy Ingots and Castings and Lead Alloy Ingots and Castings (Antifriction Metal) for Bearing Applications |
| MIL-STD-278 Revision F:1987 | WELDING AND CASTING STANDARD (REPLACEMENT DOCUMENT NAVSEA TECH PUB S9074-AR-GIB-010/278) |
| QQ-S-763 Revision F:1996 | STEEL BARS, WIRE, SHAPES, AND FORGINGS; CORROSION RESISTANT (S/S BY SAE-AMS-QQ-S-763) |
| QQ S 631 : LATEST | |
| QQ S 630 : LATEST | |
| ASTM E 280 : 2015 : REDLINE | Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings |
| MIL-Q-9858 Revision A:1963 | Quality Program Requirements (No S/S Document) |
| QQ-S-624 Revision C:1961 | Steel Bar, Alloy, Hot Rolled and Cold Finished, (General Purpose) (S/S ASTM-A304, A322/A331) |
| MIL-C-23233 Revision A:1992 | Couplings for Propulsion Units, Auxiliary Turbines and Line Shafts, Naval Shipboard |
| MIL S 18410 : NOTICE 1 | |
| MIL-G-17859 Revision D:1993 | Gear Assembly, Propulsion (Naval Shipboard Use) |
| MIL-S-24093 Revision A:1991 | STEEL FORGINGS, CARBON AND ALLOY HEAT TREATED |
| MIL-F-3541 Revision C:1989 | Fittings, Lubrication, General Specification for (S/S by SAE-AS35411) |
| MIL-S-23284 Revision A:1990 | Steel Forgings, Carbon and Alloy, for Shafts, Sleeves, Propeller Nuts, Couplings, and Stocks (Rudders and Diving Planes) |
| MIL-T-19646 Revision A:1990 | Thermometer, Gas Actuated, Remote Reading |
| QQ-S-635 Revision B:1976 | Steel Plate, Carbon (S/S by ASTM-A827) |
| MIL S 866 : C | STEEL: BARS AND BILLETS (FOR CARBURIZING) |
| MIL S 21427 : B | STRAINER, ASSEMBLIES, MAIN STREAM, HIGH PRESSURE (SIZES 4 INCHES AND ABOVE) |
| MIL N 25027 : G | NUT, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, AND 800 DEGREES F |
| MIL S 870 : B | STEEL CASTING, MOLYBDENUM ALLOY |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.