NASA SSTD 8070 0122 : 2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PROCEDURE FOR GTAW OF 625 ALLOY TO 300 SERIES STAINLESS STEEL
Superseded date
01-08-2024
Superseded by
Published date
01-01-2014
Sorry this product is not available in your region.
1.0 PURPOSE
2.0 APPLICABILITY
3.0 REFERENCES AND APPLICABLE DOCUMENTS
4.0 RESPONSIBILITIES
5.0 REQUIREMENTS AND PROCEDURES
6.0 RECORDS AND FORMS
7.0 ABBREVIATIONS AND ACRONYMS
8.0 ATTACHMENTS
Specifies a qualified American Society of Mechanical Engineers (ASME) weld procedure for Gas Tungsten Arc Welding (GTAW) of 625 Alloy (UNS N06625) to 300 Series Stainless Steel at SSC.
| Committee |
WELD
|
| DocumentType |
Standard
|
| PublisherName |
National Aeronautics and Space Administration
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE AMS5896B | Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 10.5Ni - 0.55Ti (321) Solution Heat Treated and Cold Drawn, 1/8 Hard Temper |
| SAE AMS5645S | Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 10Ni - 0.40Ti (321) Solution Heat Treated |
| SAE AMS5402C | Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 62Ni - 21.5Cr - 9.0Mo - 3.6Cb (Nb) As Cast |
| ASTM A 632 : 2004 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service |
| SAE AMS5912B | Steel, Corrosion-Resistant, Sheet and Strip 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength |
| SAE AMS5501E | Steel, Corrosion Resistant, Sheet, Strip, and Foil 19Cr - 9.5Ni (304) Cold Rolled, 125 ksi (862 MPa) Tensile Strength |
| SAE AMS5558H | Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.70Cb (Nb) (347) Thin Wall Solution Heat Treated |
| SAE AMS5910B | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 125 ksi (862 MPa) Tensile Strength |
| ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
| SAE AMS5581F | Nickel Alloy, Corrosion and Heat-Resistant, Seamless or Welded Tubing 62Ni - 21.5Cr - 9.0Mo - 3.7Cb (Nb) Annealed |
| SAE AMS5897B | Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 11Ni - 0.80Cb (Nb) (SAE 30347) Solution Heat Treated and Cold Drawn, 1/8 Hard Temper |
| ASTM A 908 : 2003 | Standard Specification for Stainless Steel Needle Tubing |
| SAE AMS5599H | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7 Cb (Nb) Annealed |
| SAE AMS5512L | Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 18Cr - 10.5Ni - 0.80Cb (SAE 30347) Solution Heat Treated |
| SAE AMS5571J | Steel, Corrosion and Heat-Resistant, Seamless Tubing 18Cr - 10.5Ni - 0.70Cb (Nb) (347) Solution Heat Treated |
| ASTM A 959 : 2016 : REDLINE | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
| ASTM A 666 : 2015 : REDLINE | Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
| ASME PV CODE 2 SET : 2013 | ASME BOILER AND PRESSURE VESSEL CODE (BPVC) - MATERIALS (SET) |
| SAE AMS5573L | Steel, Corrosion and Heat-Resistant, Seamless Tubing 17Cr - 12Ni - 2.5Mo (SAE 30316) Solution Heat Treated |
| ASME B31.3:2016 | PROCESS PIPING |
| SAE AMS5564C | Steel, Corrosion Resistant, Tubing 19CR - 10Ni (SAE 30304) High-Pressure Hydraulic, Welded Plus Ultrasonically Tested or Seamless Cold Drawn, One Eighth - Hard Temper |
| SAE AMS5913B | Steel, Corrosion-Resistant, Sheet and Strip 19Cr - 9.2Ni (SAE 30304) Cold Rolled, Full Hard, 185 ksi (1276 MPa) Tensile Strength |
| SAE AMS5563C | Steel, Corrosion Resistant, Seamless or Welded Tubing 19Cr - 9.5Ni (SAE 30304) Cold Drawn, ¼ Hard Temper |
| SAE AMS5513J | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 19Cr – 9.2Ni (SAE 30304) Solution Heat Treated |
| SAE AMS5647K | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 19Cr - 9.5Ni Solution Heat Treated |
| SAE AMS5584A | Steel, Corrosion and Heat Resistant, Seamless and Welded Hydraulic Tubing 17Cr - 12Ni - 1.5Mo - 0.03C max Cold Drawn, 1/8 Hard Temper |
| SAE AMS5648M | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 17Cr - 12Ni - 2.5Mo (316) Solution Heat Treated |
| SAE AMS5654F | Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 11Ni - 0.60Cb (Nb) (347) Premium Aircraft Quality, Consumable Electrode Melted Solution Heat Treated |
| SAE J405_199806 | Chemical Compositions of SAE Wrought Stainless Steels |
| ASTM B 834 : 2017 : REDLINE | Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367), Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625), Nickel-Chromium-Iron Alloys (UNS N06600 and N06690), and Nickel-Chromium-Iron-Columbium-Molybdenum (UNS N07718) Alloy Pipe Flanges, Fittings, Valves, and Parts |
| SAE AMS5566M | Steel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing 19Cr - 10Ni (304) High Pressure, Cold Drawn |
| SAE AMS5567F | Steel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing 19Cr - 10Ni (304) Solution Heat Treated |
| SAE AMS5510S | Steel, Corrosion and Heat-Resistant, Sheet, Strip and Plate 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated |
| ASTM A 511 : 2004 | Standard Specification for Seamless Stainless Steel Mechanical Tubing |
| SAE AMS5869C | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7Cb Solution Heat Treated |
| SAE AMSQQS763D | Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings |
| SAE AMS5857C | Steel, Corrosion-Resistant, Bars and Wire 19Cr - 10Ni (304) High Yield Strength Solution Heat Treated and Cold Worked |
| SAE AMS5559J | Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Thin Wall Solution Heat Treated |
| SAE J467_196810 | SPECIAL PURPOSE ALLOYS ('SUPERALLOYS') |
| SAE AMS5575P | Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.70Cb (Nb) (347) Solution Heat Treated |
| SAE AMS5911B | Steel, Corrosion-Resistant, Sheet and Strip 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 1/2 Hard, 150 ksi (1034 MPa) Tensile Strength |
| ASTM A 965/A965M : 2014-05 | SPECIFICATION FOR STEEL FORGINGS, AUSTENITIC, FOR PRESSURE AND HIGH TEMPERATURE PARTS |
| SAE AMS5570Q | Steel, Corrosion and Heat-Resistant, Seamless Tubing 18Cr - 11Ni - 0.40Ti (321) Solution Heat Treated |
| MIL-E-21562 Revision E:1989 | ELECTRODES AND RODS - WELDING, BARE, NICKEL ALLOY |
| SAE AMS5639J | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 19Cr - 10Ni Solution Heat Treated |
| ASTM B 705 : 2017 : REDLINE | Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe |
| SAE AMS5511H | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 19Cr - 9.5Ni (304L) Solution Heat Treated |
| MIL-DTL-23196 Revision F:2017 | STEEL PLATE, CORROSION RESISTANT (UNS S30400/S30403, S31600/S31603, S31703, S34700, AND S34800) |
| SAE AMS5907B | Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 17Cr - 12Ni - 2.5Mo (SAE 30316) Cold Rolled, 1/4 Hard, 125 ksi (862 MPa) Tensile Strength |
| ASTM A 554 : 2016 : REDLINE | Standard Specification for Welded Stainless Steel Mechanical Tubing |
| NASA SSTD 8070 0013 : 2015 | CLASSES OF WELDING INSPECTION |
| SAE AMS5524L | Steel, Corrosion and Heat-Resistant, Sheet, Strip and Plate 18Cr - 13Ni - 2.5Mo (SAE 30316) Solution Heat Treated |
| NASA SSTD 8070 0005 : 2016 | PREPARATION, REVIEW, APPROVAL, AND RELEASE OF SSC STANDARDS |
| NASA SSTD 8070 0014 : 2010 | STANDARD FOR QUALIFYING WELDERS AND WELDING PROCEDURES |
| SAE AMS5653H | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 17Cr - 12Ni - 2.5Mo (0.030 Max C) (316L) Solution Heat Treated |
| SAE AMS5666H | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, Extrusions, and Rings 62Ni - 21.5Cr - 9.0Mo - 3.65Cb (Nb) Annealed |
| SAE AMST6845B | Tubing, Steel, Corrosion-Resistant (S30400), Aerospace Vehicle Hydraulic System 1/8 Hard Condition |
| ASTM B 751 : 2008 | Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube |
| SAE AMS5868B | Steel, Corrosion-Resistant, Seamless and Welded Aircraft Tubing 19Cr - 9.5Ni (SAE 30304) Cold Drawn, 1/2 Hard Temper |
| SAE AMS 5401 : 2004 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, INVESTMENT CASTINGS, 62NI - 21.5CR - 9.0MO - 3.6CB (NB), VACUUM MELTED, VACUUM CAST, AS CAST |
| SAE AMS 5576 : 2005 | STEEL, CORROSION AND HEAT RESISTANT, WELDED TUBING - 18CR - 10.5NI - 0.40TI (SAE 30321) SOLUTION HEAT TREATED |
| SAE AMS5556J | Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18Cr - 11Ni - 0.70Cb (347) Solution Heat Treated |
| MIL-DTL-23195 Revision F:1997 | STEEL BARS AND FORGINGS, CORROSION RESISTANT, AUSTENITIC (UNS S30400, S30403, S31600, S31603, S34700, AND S34800) |
| SAE AMS5565L | Steel, Corrosion Resistant, Welded Tubing 19Cr - 9.5Ni (304) Solution Heat Treated |
| SAE AMS5557J | Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated |
| SAE AMS5507G | Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 17Cr - 13Ni - 2.5Mo (316L) Solution Heat Treated |
| SAE AMS5560N | Steel, Corrosion Resistant, Seamless Tubing 19Cr - 10Ni (304) Solution Heat Treated |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.