NF EN 1114-3 : 2001 + A1 2008
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
30-09-2021
12-01-2013
Avant-propos
Introduction
1 Domaine d'application
2 Références normatives
3 Termes et définitions
4 Liste des phénomènes dangereux significatifs
4.1 Phénomènes dangereux mécaniques
4.2 Phénomènes dangereux dus à l'énergie électrique
4.3 Phénomènes dangereux dus aux équipements
hydrauliques et pneumatiques
4.4 Phénomènes dangereux dus à une défaillance de parties
des systèmes de commande relatives à la sécurité
4.5 Phénomènes dangereux thermiques
4.6 Phénomènes dangereux dus au bruit
4.7 Phénomènes dangereux dus à une instabilité
5 Prescriptions de sécurité et/ou mesures de prévention
5.1 Phénomènes dangereux mécaniques
5.2 Phénomènes dangereux dus à l'énergie électrique
5.3 Phénomènes dangereux dus aux équipements
hydrauliques et pneumatiques
5.4 Phénomènes dangereux dus à une défaillance de parties
des systèmes de commande relatives à la sécurité
5.5 Phénomènes dangereux thermiques
5.6 Phénomènes dangereux dus au bruit
5.7 Phénomènes dangereux dus à une instabilité
6 Vérification des prescriptions de sécurité et/ou mesures
de prévention
7 Informations pour l'utilisation
7.1 Marquage minimal sur la machine
7.2 Notice d'instructions
Annexe ZA (informative) Relation entre la présente Norme
européenne et les exigences essentielles de
la Directive européenne 98/37/CE
Annexe ZB (informative) Relation entre la présente Norme
européenne et les exigences essentielles de
la Directive européenne 2006/42/CE
Bibliographie
Describes the safety requirements for the design and construction of haul-offs used in extrusion lines for processing plastics and rubber for the hazards identified in clause 8.
| DevelopmentNote |
Indice de classement: E63-607-3PR. (10/2002) 2001 Edition Re-issued in December 2008 & incorporates AMD 1 2008. (12/2008) PR NF EN 1114-3 January 2016. (01/2016)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| NBN EN 1114-3 : 2001 + A1 2008 | Identical |
| UNI EN 1114-3 : 2009 | Identical |
| NEN EN 1114-3 : 2001 + A1 2008 | Identical |
| NS EN 1114-3 : 2001 + A1 2008 | Identical |
| EN 1114-3:2001+A1:2008 | Identical |
| DIN EN 1114-3:2015-12 (Draft) | Identical |
| UNE-EN 1114-3:2001 | Identical |
| BS EN 1114-3 : 2001 | Identical |
| I.S. EN 1114-3:2001 | Identical |
| ONORM EN 1114-3 : 2010 | Identical |
| SN EN 1114-3 : 2001 + A1 2009 | Identical |
| DIN EN 1114-3:2010-01 | Identical |
| NF EN 1070 : 1998 | SAFETY OF MACHINERY - TERMINOLOGY |
| NF EN ISO 12100-1 : 2004 AMD 1 2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
| NF EN 60204-1 : 2006 AMD 1 2009 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| NF EN ISO 3744 : 2012 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE |
| NF EN 1037 : 1996 + A1 2008 | SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP |
| NF EN 1760-2 : 2001 + A1 2009 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSING EDGES AND PRESSURE SENSITIVE BARS |
| NF EN 983 : 1996 + A1 2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS |
| NF EN 60529 : 92 AMD 2 2014 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) |
| NF EN 1088 : 1996 + A2 2008 | SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION |
| NF EN 954-1 : 1997 | SAFETY OF MACHINERY - SAFETY RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
| NF EN 999 : 1998 + A1 2008 | SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEEDS OF PARTS OF THE HUMAN BODY |
| NF EN ISO 11201 : 2010 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE WITH NEGLIGIBLE ENVIRONMENTAL CORRECTIONS |
| NF EN ISO 11204 : 2010 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS |
| NF EN ISO 4871 : 2009 | ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT |
| NF EN 563 : 94 AMD 1 99 | SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES |
| NF EN 294 : 1992 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| NF EN 418 : 1993 | SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
| NF EN 811 : 1996 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS |
| NF EN 574 : 1997 + A1 2008 | SAFETY OF MACHINERY - TWO-HAND CONTROL DEVICES - FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| NF EN 982 : 1996 + A1 2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS |
| NF EN ISO 12100-2 : 2004 AMD 1 2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
| NF EN ISO 11688-1 : 2009 | ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 1: PLANNING |
| NF EN 953 : 1997 + A1 2009 | SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.