NF EN 14276-2 : 2007 + A1 2011
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
18-04-2020
12-01-2013
Avant-propos
Introduction
1 Domaine d'application
2 Références normatives
3 Termes, définitions, symboles, grandeurs et unités
4 Matériaux
5 Classification des tuyauteries
6 Conception
7 Fabrication
8 Essais et inspection
Annexe A (informative) Système DN
Annexe ZA (informative) Relation entre la présente Norme
européenne et les exigences essentielles de la
Directive UE 97/23/CE
Bibliographie
Defines the requirements for material, design, manufacturing, testing and documentation for stationary piping intended for use in refrigerating systems, heat pumps and secondary cooling and heating systems.
DevelopmentNote |
Indice de classement: E35-414-2PR. PR NF EN 14276-2 June 2003. (06/2003) 2007 Edition Re-issued in April 2011 & incorporates AMD 1 2011. (04/2011) PR NF EN 14276-2 March 2017. (03/2017)
|
DocumentType |
Standard
|
PublisherName |
Association Francaise de Normalisation
|
Status |
Withdrawn
|
SupersededBy |
Standards | Relationship |
NEN EN 14276-2 : 2007 + A1 2011 | Identical |
I.S. EN 14276-2:2007 | Identical |
DIN EN 14276-2:2011-05 | Identical |
NBN EN 14276-2 : 2007 + A1 2011 | Identical |
NS EN 14276-2 : 2007 + A1 2011 | Identical |
UNI EN 14276-2 : 2011 | Identical |
EN 14276-2:2007+A1:2011 | Identical |
SN EN 14276-2 : 2007 + A1 2011 | Identical |
BS EN 14276-2 : 2007 | Identical |
PREN 14276-2 : DRAFT 2017 | Identical |
ONORM EN 14276-2 : 2011 | Identical |
EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials |
EN 378-4:2016 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery |
EN 378-1:2016 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria |
EN 378-3:2016 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection |
EN 764-1:2015+A1:2016 | Pressure equipment - Part 1: Vocabulary |
EN ISO 4063:2010 | Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) |
EN ISO 23277:2015 | Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015) |
EN 14276-1:2006+A1:2011 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
EN 764-5:2014 | Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification |
EN 12178:2016 | Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking |
EN 13480-3:2017 | Metallic industrial piping - Part 3: Design and calculation |
EN 10246-16:2000 | Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections |
EN 1289:1998/A2:2003 | NON-DESTRUCTIVE TESTING OF WELDS - PENETRANT TESTING OF WELDS - ACCEPTANCE LEVELS |
EN 22553:1994 | Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992) |
EN 12735-2:2016 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment |
EN 12735-1:2016 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems |
EN 10204:2004 | Metallic products - Types of inspection documents |
EN 10246-9:2000 | Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections |
EN 1712:1997/A2:2004 | NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING OF WELDED JOINTS - ACCEPTANCE LEVELS |
EN 764-2:2012 | Pressure equipment - Part 2: Quantities, symbols and units |
EN 12517-1:2006 | Non-destructive testing of welds - Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels |
ISO 817:2014 | Refrigerants — Designation and safety classification |
EN 571-1:1997 | Non destructive testing - Penetrant testing - Part 1: General principles |
EN 970:1997 | Non-destructive examination of fusion welds - Visual examination |
EN 764-3:2002 | Pressure equipment - Part 3: Definition of parties involved |
EN 378-2:2016 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
EN 764-4:2014 | Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.