NF EN 61095 : 2009
Current
The latest, up-to-date edition.
ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
12-01-2013
AVANT-PROPOS
INTRODUCTION
1 Domaine d'application
2 Références normatives
3 Termes et définitions
3.1 Termes généraux
3.2 Appareils de connexion
3.3 Parties d'appareils de connexion
3.4 Manoeuvre des appareils de connexion
3.5 Grandeurs caractéristiques
4 Classification
5 Caractéristiques des contacteurs
5.1 Enumération des caractéristiques
5.2 Type du contacteur
5.3 Valeurs assignées et valeurs limites des circuits
principaux
5.4 Catégorie d'emploi
5.5 Circuits de commande
5.6 Circuits auxiliaires
5.7 Coordination avec les dispositifs de protection
contre les courts-circuits
6 Informations sur le matériel
6.1 Nature des informations
6.2 Marquage
6.3 Instructions d'installation, de fonctionnement et
d'entretien
7 Conditions normales de service, de montage et de
transport
7.1 Conditions normales de service
7.2 Conditions pendant le transport et le stockage
7.3 Montage
8 Dispositions relatives à la construction et au
fonctionnement
8.1 Dispositions constructives
8.2 Dispositions relatives au fonctionnement
8.3 Compatibilité électromagnétique
9 Essais
9.1 Nature des essais
9.2 Conformité aux dispositions constructives
9.3 Conformité aux dispositions relatives au
fonctionnement
Annexe A (normative) Marquage des bornes et numéro
distinctif
Annexe B (normative) Séquences d'essais et nombre
d'échantillons
Annexe C (normative) Description d'une méthode pour le
réglage du circuit de charge
Annexe D (normative) Détermination du facteur de
puissance d'un court-circuit
Annexe E (normative) Mesure des lignes de fuite et des
distances d'isolement
Annexe F (normative) Correspondance entre la tension
nominale du réseau d'alimentation et la tension
assignée de tenue aux chocs d'un contacteur
Annexe G (normative) Essai d'inflammation au fil chauffant
Annexe H (normative) Degrés de protection d'un contacteur
sous enveloppe
Annexe I (normative) Exigences et essais pour le matériel
avec séparation de protection
Annexe ZA (normative) Références normatives à d'autres
publications internationales avec les publications
européennes correspondantes
Covers electromechanical air break contactors for household and similar use, with main contacts for connection to circuits, their rated voltage being not more than 440 V a.c. with rated operational currents equal to or less than 63 A for utilisation category AC-7a and 32 A for utilization category AC-7b, and rated conditional short-circuit current equal to or less than 6 kA.
DevelopmentNote |
Indice de classement: C61-480. Supersedes NFC 61-810. (10/2001) Supersedes NFC 61 480. (05/2005) PR NF EN 61095 October 2007. (10/2007)
|
DocumentType |
Standard
|
PublisherName |
Association Francaise de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
I.S. EN 61095:2009 | Identical |
DIN EN 61095 : 2009 | Identical |
EN 61095:2009 | Identical |
SN EN 61095 : 1993 AMD 1 2000 | Identical |
IEC 61095:2009 | Identical |
NBN EN 61095 : 2009 | Identical |
UNE-EN 61095:2010 | Identical |
BS EN 61095:1993 | Identical |
IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
NFC 01 604 : 87 AMD 2 2016 | ELECTROTECHNICAL VOCABULARY - CHAPTER 604: GENERATION, TRANSMISSION AND DISTRIBUTION OF ELECTRICITY - OPERATION |
IEC 60028:1925 | International standard of resistance for copper |
2006/95/EC : 2006 | DIRECTIVE 2006/1995/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 12 DECEMBER 2006 ON THE HARMONISATION OF THE LAWS OF MEMBER STATES RELATING TO ELECTRICAL EQUIPMENT DESIGNED FOR USE WITHIN CERTAIN VOLTAGE LIMITS (CODIFIED VERSION) (TEXT WITH EEA RELEVANCE) |
IEC 60947-4-1:2009+AMD1:2012 CSV | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
IEC 60073:2002 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
IEC 60050-151:2001 | International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices |
NF EN 60664-1 : 2007 | INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS |
NF EN 60947-1 : 2007 AMD 2 2015 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
IEC 60050-441:1984 | International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses |
NF EN 60085 : 2008 | ELECTRICAL INSULATION - THERMAL EVALUATION AND DESIGNATION |
NF EN 60099-1 : 94 AMD 1 2000 | SURGE ARRESTERS - PART 1: NON-LINEAR RESISTOR TYPE GAPPED SURGE ARRESTERS FOR A.C. SYSTEMS |
NFC 01 826 : 2004 | ELECTROTECHNICAL VOCABULARY - CHAPTER 826 - ELECTRICAL INSTALLATIONS OF BUILDINGS |
NF EN 60695-11-10 : 2013 | FIRE HAZARD TESTING - PART 11-10: TEST FLAMES - 50 W HORIZONTAL AND VERTICAL FLAME TEST METHODS |
NF EN 61140 : 2016 | PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT |
IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
NF EN ISO 2039-2 : 1999 | PLASTICS - DETERMINATION OF HARDNESS - PART 2: ROCKWELL HARDNESS |
NF EN 60529 : 92 AMD 2 2014 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) |
NF EN 60947-5-1 : 2004 AMD 1 2009 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES |
NF EN 60112 : 2003 AMD 1 2010 | METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS |
ISO 2039-2:1987 | Plastics — Determination of hardness — Part 2: Rockwell hardness |
IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
FD ISO 7000 : 2004 FD | SYMBOLES GRAPHIQUES UTILISABLES SUR LE MATERIEL - INDEX ET TABLEAU SYNOPTIQUE |
IEC 60447:2004 | Basic and safety principles for man-machine interface, marking and identification - Actuating principles |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
IEC 60364-4-44:2007+AMD1:2015 CSV | Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances |
IEC 60099-1:1991+AMD1:1999 CSV | Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems |
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV | Low-voltage switchgear and controlgear - Part 1: General rules |
IEC 60695-11-10:2013 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
NF EN 60068-2-78 : 2013 | ENVIRONMENTAL TESTING - PART 2-78: TESTS - TEST CAB: DAMP HEAT, STEADY STATE |
NF EN 60073 : 2003 | BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATORS AND ACTUATORS |
NF EN 60447 : 2004 | BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - ACTUATING PRINCIPLES |
IEC 60050-826:2004 | International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations |
ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
NF EN 60695-2-10 : 2013 | FIRE HAZARD TESTING - PART 2-10: GLOWING/OUT-WIRE BASED TEST METHOD - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE |
IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
IEC 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
IEC 60445:2017 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors |
IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
NF EN 60947 4-1 : 2010 AMD 1 2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.