Skip to content
Please enter a keyword to search

  • ISO 2039-2:1987

    Current The latest, up-to-date edition.

    Plastics Determination of hardness Part 2: Rockwell hardness

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English, French

    Published date:  02-07-1987

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    Specifications of a method for the determination of the indentation hardness of plastics by means of the Rockwell hardness tester using the Rockwell M, L and R hardness scales. The Rockwell hardness number is derived from the net increase in depth of impression as the load on an indentor is increased from a fixed minor load to a major load and then returned to the same minor load. For materials having high creep and recovery, the time-factors involved in application of the major and minor loads have a considerable effect on the results of the measurements.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    DIN EN 10245-5:2012-01 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
    DD CLC/TS 50131-2-7-3:2009 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE)
    DIN EN ISO 19712-2:2013-04 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
    BS ISO 19712-3 : 2007 PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES
    DIN EN ISO 19712-2 E : 2013 PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS (ISO 19712-2:2007)
    BS ISO 20753 : 2008 PLASTICS - TEST SPECIMENS
    UNE-EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
    PREN 845-1 : DRAFT 2012 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS
    IEC 60898-1:2015 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation
    98/202332 DC : DRAFT MAY 1998 IEC 60670-1 - BOXES AND ENCLOSURES FOR ELECTRICAL ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    I.S. EN 50131-2-8:2016 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-8: INTRUSION DETECTORS - SHOCK DETECTORS
    CEI EN 61995-1 : 2009 DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS
    S.R. CLC/TS 50131-2-7-3:2009 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE)
    CEI EN 61095 : 2010 ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
    CEI EN 61643-11 : 2014 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS
    IEC 60669-1 REDLINE : 4ED 2017 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    DIN EN ISO 20753 E : 2014 PLASTICS - TEST SPECIMENS (ISO 20753:2008)
    DIN EN ISO 20753:2014-07 PLASTICS - TEST SPECIMENS (ISO 20753:2008)
    DIN EN ISO 8257-2 E : 2006 PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    I.S. EN ISO 7823-1:2003 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS
    DIN EN ISO 8257-2:2006-06 PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    EN 10245-5:2011 Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire
    EN 50131-2-8:2016 Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors
    EN 50102:1995/corrigendum Jul. 2002 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES FOR ELECTRICAL EQUIPMENT AGAINST EXTERNAL MECHANICAL IMPACTS (IK CODE)
    EN 60068-2-62 : 1995 ENVIRONMENTAL TESTING - PART 2: TEST METHODS - TEST EF: IMPACT, PENDULUM METHOD
    EN 60068-2-63 : 1994 ENVIRONMENTAL TESTING - PART 2: TEST METHODS - TEST EG: IMPACT, SPRING HAMMER
    NF EN 60669-1 : 2000 AMD 2 2009 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    BS EN 10245-5:2011 Steel wire and wire products. Organic coatings on steel wire Polyamide coated wire
    DD CLC/TS 50131-2-7-2:2009 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-2: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE)
    BS EN 50131-2-8:2016 Alarm systems. Intrusion and hold-up systems Intrusion detectors. Shock detectors
    96/205308 DC : 0 PREN 50245 - PLUGS AND SOCKET-OUTLETS 16A 250 V A.C. FOR HOUSEHOLD AND SIMILAR PURPOSES GENERAL REQUIREMENTS AND DIMENSIONS VARIANT 1 (3P + 2P)
    IEC 62642-2-71:2015 Alarm systems - Intrusion and hold-up systems - Part 2-71: Intrusion detectors - Glass break detectors (acoustic)
    DIN ISO 11040-4 E : 2017 PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015)
    BS ISO 19712-2 : 2007 PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS
    12/30265756 DC : 0 BS EN 845-1 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS
    06/30147348 DC : DRAFT MAR 2006 ISO 19712-3 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES
    CEI 23-95 : 2010 RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION INCORPORATED IN OR TO BE ASSOCIATED WITH FIXED SOCKET-OUTLETS (SRCBOS)
    96/205309 DC : 0 PREN 50245 - PLUGS AND SOCKET-OUTLETS 16 A 250V A.C. FOR HOUSEHOLD AND SIMILAR PURPOSES - GENERAL REQUIREMENTS AND DIMENSIONS VARIANT 2 (3P)
    ISO 20753:2008 Plastics Test specimens
    BS ISO 11040-4:2015 Prefilled syringes Glass barrels for injectables and sterilized subassembled syringes ready for filling
    GOST R IEC 60269-3-1 : 2004 LOW-VOLTAGE FUSES - PART 3-1 - SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - SECTIONS 1 TO 5
    BS ISO 8257-2:1990 PLASTICS - POLY (METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    S.R. CLC/TS 50131-2-7-1:2009 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACOUSTIC)
    SAE J 1875 : 2001 MATERIALS FOR PLASTIC CHECK VALVES FOR VACUUM BOOSTER SYSTEMS
    BS EN 60669-1 : 2000 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    I.S. EN 50102:1997 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES FOR ELECTRICAL EQUIPMENT AGAINST EXTERNAL MECHANICAL IMPACTS (IK CODE)
    I.S. EN 60898-1:2003 ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION (IEC 60898-1:2002 (MOD))
    ISO 19213:2017 Implants for surgery — Test methods of material for use as a cortical bone model
    I.S. EN ISO 19712-2:2013 PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS (ISO 19712-2:2007)
    CLC/TS 50131-2-7-1:2009 Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic)
    UNI EN ISO 19712-3 : 2013 PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES
    ASTM D 4000 : 2016 : REDLINE Standard Classification System for Specifying Plastic Materials
    IEC 62899-201:2016 Printed electronics - Part 201: Materials - Substrates
    ISO 7823-3:2007 Plastics Poly(methyl methacrylate) sheets Types, dimensions and characteristics Part 3: Continuous cast sheets
    BS EN ISO 7823-3:2007 Plastics. Poly(methacrylate) sheets. Types, dimensions and characteristics Continuous cast sheets
    15/30326358 DC : 0 BS EN 60898-3 - ELECTRICAL ACCESSORIES - CIRCUIT-BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 3: CIRCUIT-BREAKERS FOR D.C. OPERATION
    I.S. EN ISO 8257-2:2006 PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    I.S. EN ISO 14663-2:2006 PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    I.S. EN 845-1:2013 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS
    I.S. EN ISO 7823-3:2007 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 3: CONTINUOUS CAST SHEETS
    BS 3412:1992 Methods of specifying general purpose polyethylene materials for moulding and extrusion
    BS 4936:1987 METHOD OF SPECIFYING STYRENE ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS
    BIS IS/IEC 60898-1 : 2002 ELECTRICAL ACCESSORIES - CIRCUIT-BREAKERS FOR OVER CURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR AC OPERATION
    NBR IEC 60068-2-75 : 2007 ENVIRONMENTAL TESTING - PART 2: TESTS - TEST EH: HAMMER TEST
    BS 1493:1987 METHOD OF SPECIFYING GENERAL PURPOSE POLYSTYRENE (PS) MOULDING AND EXTRUSION MATERIALS
    VDI/VDE 2616 Blatt 2:2014-07 Hardness testing of plastics and elastomers
    BS EN ISO 19712-3:2013 Plastics. Decorative solid surfacing materials Determination of properties. Solid surface shapes
    I.S. EN 61995-1:2008 DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS
    BS EN 60068-2-62:1996 ENVIRONMENTAL TESTING - TEST METHODS - TEST Ef. IMPACT, PENDULUM HAMMER
    BS EN 60068-2-63:1995 ENVIRONMENTAL TESTING - TEST METHODS - TEST EG: IMPACT, SPRING HAMMER
    13/30273499 DC : 0 BS ISO 11040-4 - PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING
    09/30210369 DC : DRAFT SEP 2009 IEC 61643-11 - LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER DISTRIBUTION SYSTEMS - PERFORMANCE REQUIREMENTS AND TESTING METHODS
    06/30137509 DC : DRAFT MAR 2006 ISO 19712-2 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS
    I.S. EN ISO 20753:2014 PLASTICS - TEST SPECIMENS (ISO 20753:2008)
    IEC 60669-1:2017 RLV Switches for household and similar fixed-electrical installations - Part 1: General requirements
    EN 61995-1:2008/A1:2017 DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 61995-1:2005/A1:2016)
    I.S. EN ISO 19712-3:2013 PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES (ISO 19712-3:2007)
    I.S. EN 61643-11:2012 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TESTS METHODS
    I.S. EN 60068-2-75:2014 ENVIRONMENTAL TESTING - PART 2-75: TESTS - TEST EH: HAMMER TESTS
    SAE J 1568 : 2012 MATERIALS FOR PLASTIC PISTONS FOR HYDRAULIC DISC BRAKE CYLINDERS
    BS EN ISO 20753:2014 Plastics. Test specimens
    HD 62640:2015/A11:2016 RESIDUAL CURRENT DEVICES WITH OR WITHOUT OVERCURRENT PROTECTION FOR SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR USES (IEC 62640:2011, MODIFIED)
    ASTM D 785 : 2008 : R2015 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
    ASTM D 5857 : 2017 : REDLINE Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
    IEC 60669-1:2017 Switches for household and similar fixed-electrical installations - Part 1: General requirements
    I.S. EN 60068-2-62:1996 ENVIRONMENTAL TESTING - PART 2: TEST METHODS TEST EF: IMPACT, PENDULUM HAMMER
    IEC 62642-2-72:2015 Alarm systems - Intrusion and hold-up systems - Part 2-72: Intrusion detectors - Glass break detectors (passive)
    IEC 61643-1:2005 Low-voltage surge protective devices - Part 1: Surge protective devices connected to low-voltage power distribution systems - Requirements and tests
    IEC 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
    EN 60898-1:2003/A13:2012 ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION (IEC 60898-1:2002, MODIFIED)
    EN ISO 14663-2:2006 Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 14663-2:1999)
    BS 3676-1(2000) : 2000 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    EN 60898-1:2003/A13:2012 ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION (IEC 60898-1:2002, MODIFIED)
    ONORM EN ISO 19712-3 : 2013 PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES (ISO 19712-3:2007)
    BS EN ISO 19712-2:2013 Plastics. Decorative solid surfacing materials Determination of properties. Sheet goods
    UNI EN 10245-5 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
    S.R. CLC/TS 50131-2-7-2:2009 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-2: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE)
    14/30304003 DC : 0 BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES
    07/30137506 DC : 0 BS ISO 19712-1 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 1: CLASSIFICATION AND SPECIFICATIONS
    04/30123989 DC : DRAFT OCT 2004 IEC 61643-11 - SURGE PROTECTION DEVICES CONNECTED TO LOW-VOLTAGE POWER DISTRIBUTION SYSTEMS - PART 11: PERFORMANCE REQUIREMENTS AND TESTING METHODS
    DD CLC/TS 50131-2-7-1:2009 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACOUSTIC)
    BS ISO 14663-2 : 1999 AMD 16029 PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    BS EN 60068-2-75:2014 Environmental testing Tests. Test Eh: Hammer tests
    BS 2011-2.1EF(1992) : 1992 ENVIRONMENTAL TESTING - TESTS - IMPACT, PENDULUM HAMMER
    CLC/TS 50131-2-7-2:2009 Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors - Glass break detectors (passive)
    BS EN 62094-1:2003 Indicator light units for household and similar fixed-electrical installations General requirements
    UTEC 61 610 : 2007 ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - REMOVABLE EARTHING BARS
    03/317673 DC : 0 IEC 61995-1 - DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS
    09/30200661 DC : 0 BS EN 60669-1 ED 4.0 - SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    BS ISO 19213:2017 Implants for surgery. Test methods of material for use as a cortical bone model
    BS EN 61995-1:2008 Devices for the connection of luminaires for household and similar purposes General requirements
    BS IEC 62899-201 : 2016 PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES
    UNI EN ISO 20753 : 2014 PLASTICS - TEST SPECIMENS
    NF EN 61095 : 2009 ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
    ISO 7823-2:2003 Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Extruded sheets
    IEC 62642-2-73:2015 Alarm systems - Intrusion and hold-up systems - Part 2-73: Intrusion detectors - Glass break detectors (active)
    EN ISO 20753 : 2014 PLASTICS - TEST SPECIMENS (ISO 20753:2008)
    ISO 11040-4:2015 Prefilled syringes Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
    I.S. EN 60068-2-63:1995 ENVIRONMENTAL TESTING - PART 2: TEST METHODS - TEST EG: IMPACT, SPRING HAMMER
    IEC 61995-1:2005+AMD1:2016 CSV Devices for the connection of luminaires for household and similarpurposes - Part 1: General requirements
    IEC 62640:2011+AMD1:2015 CSV Residual current devices with or without overcurrent protection forsocket-outlets for household and similar uses
    DIN EN ISO 7823-3:2007-08 Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007)
    DIN EN ISO 7823-2:2003-12 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS
    BS EN 845-1 : 2013 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS
    ISO 4613-2:1995 Plastics Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
    EN 60669-1:2018 Switches for household and similar fixed electrical installations - Part 1: General requirements
    14/30272356 DC : 0 BS EN 60669-1 - SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    BS EN ISO 7823-2:2003 Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Extruded sheets
    ISO 8257-2:2001 Plastics Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
    ISO 7823-1:2003 Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets
    IEC 60068-2-63:1991 Environmental testing - Part 2: Test methods - Test Eg: Impact, spring hammer.
    BS EN ISO 7823-1:2003 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS
    BS EN ISO 8257-2:2006 PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    IEC 62094-1:2002 Indicator light units for household and similar fixed-electrical installations - Part 1: General requirements
    BS EN 60898-1 : 2003 ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION
    IEC 61095:2009 Electromechanical contactors for household and similar purposes
    ISO 19712-3:2007 Plastics Decorative solid surfacing materials Part 3: Determination of properties Solid surface shapes
    ISO 19712-2:2007 Plastics Decorative solid surfacing materials Part 2: Determination of properties Sheet goods
    IEC 60884-1:2002+AMD1:2006+AMD2:2013 CSV Plugs and socket-outlets for household and similar purposes - Part1: General requirements
    BS EN ISO 14663-2:2006 PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    EN 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
    EN ISO 8257-2:2006 Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8257-2:2001)
    EN 845-1:2013+A1:2016 Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets
    EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
    EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007)
    EN ISO 7823-1:2003 Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003)
    EN ISO 7823-2 : 2003 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS
    PREN 50539-11 : DRAFT 2010 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
    10/30212123 DC : 0 BS EN 845-1 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS
    13/30280801 DC : 0 BS EN 60068-2-75 - ENVIRONMENTAL TESTING - PART 2-75: TESTS - TEST EH: HAMMER TESTS
    15/30302738 DC : 0 BS ISO 19213 - IMPLANTS FOR SURGERY - TEST METHODS OF MATERIAL FOR USE AS A CORTICAL BONE MODEL
    BS EN 61095:1993 ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
    UNI EN ISO 19712-2 : 2013 PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS
    DIN ISO 11040-4:2007-10 PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015)
    10/30218152 DC : 0 BS EN 50539-11 - LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
    BS EN 61643-11 : 2012 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS
    PRHD 62640 : DRAFT 2014 RESIDUAL CURRENT DEVICES WITH OR WITHOUT OVERCURRENT PROTECTION FOR SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR USES (IEC 62640:2011, MODIFIED)
    CEI 23-50 : 2007 PLUGS AND SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR PURPOSES GENERAL REQUIREMENTS
    CEI 23-96 : 2010 SOCKET-OUTLETS INTERLOCKED WITH A RESIDUAL CURRENT DEVICE WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (PID)
    BS 3126(1987) : 1987 METHOD OF SPECIFYING TOUGHENED POLYSTYRENE (SB) MOULDING AND EXTRUSION MATERIALS
    EN ISO 7823-3:2007 Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007)
    DIN EN ISO 19712-3:2013-09 PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES (ISO 19712-3:2007)
    CSA E670 : 98(R2002) GENERAL REQUIREMENTS FOR ENCLOSURES AND ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS
    I.S. EN 10245-5:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
    I.S. EN 61095:2009 ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
    UNE-EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007)
    CLC/TS 50131-2-7-3:2009 Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active)
    ASTM D 785 : 2008 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
    UNE-EN 61995-1:2010 Devices for the connection of luminaires for household and similar purposes -- Part 1: General requirements
    I.S. HD 62640:2015 RESIDUAL CURRENT DEVICES WITH OR WITHOUT OVERCURRENT PROTECTION FOR SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR USES
    UNE-EN ISO 20753:2015 Plastics - Test specimens (ISO 20753:2008)
    IEC 60669-2-1:2002+AMD1:2008+AMD2:2015 CSV Switches for household and similar fixed electrical installations -Part 2-1: Particular requirements - Electronic switches
    IEC 61643-11:2011 Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods
    I.S. EN 62094-1:2003 INDICATOR LIGHT UNITS FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    DIN EN ISO 7823-1:2003-12 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS
    ISO 14663-2:1999 Plastics Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
    DIN EN 50102 : 1997 AMD 1 1999 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES FOR ELECTRICAL EQUIPMENT AGAINST EXTERNAL MECHANICAL IMPACTS (IK CODE)
    EN 62094-1:2003/A11:2003 INDICATOR LIGHT UNITS FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    DIN EN ISO 14663-2:2006-06 PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    VDE 0470-100 : 97 AMD 1 99 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES FOR ELECTRICAL EQUIPMENT AGAINST EXTERNAL MECHANICAL IMPACTS (IK CODE)
    DIN ISO 11040-4:2017-07 PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015)
    EN 61095:2009 Electromechanical contactors for household and similar purposes

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 2039-1:2001 Plastics Determination of hardness Part 1: Ball indentation method
    ISO 291:2008 Plastics Standard atmospheres for conditioning and testing
    ISO 48:2010 Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)
    ISO 868:2003 Plastics and ebonite Determination of indentation hardness by means of a durometer (Shore hardness)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective