NF EN ISO 12100-1 : 2004 AMD 1 2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
Superseded date
01-12-2010
Published date
12-01-2013
Publisher
Sorry this product is not available in your region.
Avant-propos
Introduction
1 Domaine d'application
2 Références normatives
3 Termes et définitions
4 Phénomènes dangereux à prendre en compte lors
de la conception des machines
4.1 Généralités
4.2 Phénomène dangereux mécanique
4.3 Phénomène dangereux électrique
4.4 Phénomène dangereux thermique
4.5 Phénomènes dangereux engendrés par le bruit
4.6 Phénomènes dangereux engendrés par les vibrations
4.7 Phénomènes dangereux engendrés par les
rayonnements
4.8 Phénomènes dangereux engendrés par les matériaux
et des substances
4.9 Phénomènes dangereux engendrés par le non-respect
des principes ergonomiques lors de la conception
des machines
4.10 Phénomènes dangereux de glissade, trébuchement,
chute
4.11 Combinaisons de phénomènes dangereux
4.12 Phénomènes dangereux associés à l'environnement
dans lequel la machine est utilisée
5 Stratégie de réduction du risque
5.1 Dispositions générales
5.2 Spécification des limites de la machine
5.3 Identification des phénomènes dangereux, estimation
du risque et évaluation du risque
5.4 Élimination des phénomènes dangereux ou réduction
du risque par application de mesures de prévention
5.5 Atteinte des objectifs de réduction du risque
Annexe A (informative) Représentation schématique d'une
machine Index trilingue
Bibliographie
Specifies basic terminology and methodology used in achieving safety of machinery.
| DevelopmentNote |
Indice de classement: E09-001-1 Supersedes NF EN 292-1 (02/2004)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Superseded
|
| Standards | Relationship |
| DIN EN ISO 12100-1:2004-04 | Identical |
| BS EN ISO 12100-1 : 2003 | Identical |
| UNI EN ISO 12100-1 : 2009 | Identical |
| I.S. EN ISO 12100-1:2003 | Identical |
| ISO 12100-1:2003 | Identical |
| UNE-EN ISO 12100-1:2004 | Identical |
| NF EN ISO 8230-2 : 2008 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 2: MACHINES USING PERCHLORETHYLENE |
| NF ISO 20966 : 2007 | AUTOMATIC MILKING INSTALLATIONS - REQUIREMENTS AND TESTING |
| NF EN 15094 : 2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| NF EN 50416 : 2005 AMD 1 2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC CONVEYOR DISHWASHING MACHINES |
| NF EN 15268 : 2008 | PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION AND SUBMERSIBLE PUMP ASSEMBLIES |
| NFP 98 783-2 : 2010 | ROAD MAINTENANCE EQUIPMENT AND PRODUCTS - WINTER MAINTENANCE AND ROAD SERVICE AREA MAINTENANCE EQUIPMENT - PART 2: GUIDE FOR THE TRAINING PROCEDURE OF OPERATORS OF GRASSCUTTERS/BRUSHCUTTERS, IN-LIN FLAIL MOWERS AND PLANT MECHANICAL CUTTING MACHINES |
| NF EN 50050 : 2007 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT |
| NF EN 81-43 : 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES |
| NF EN ISO 13857 : 2008 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS |
| NF EN ISO 11553-1 : 2009 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 1: GENERAL SAFETY REQUIREMENTS |
| NF EN 676 : 2004 + A2 2008 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| NF EN 474-10 : 2007 + A1 2009 | EARTH-MOVING MACHINERY - SAFETY - PART 10: REQUIREMENTS FOR TRENCHERS |
| NF EN 474-3 : 2007 + A1 2009 | EARTH-MOVING MACHINERY - SAFETY - PART 3: REQUIREMENTS FOR LOADERS |
| NF EN 14677 : 2008 | SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| NFS 52 510 : 2008 XP | QUAD BIKES (ATVS) - SAFETY REQUIREMENTS AND TEST METHODS |
| NF EN 14753 : 2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL |
| NFU 66 053 : 2006 | EQUIPMENT FOR SLAUGHTERHOUSES - SLAUGHTERING PENS - SAFETY AND HYGIENE REQUIREMENTS |
| NF EN 81-71 : 2005 + A1 2007 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PARTICULAR APPLICATIONS TO PASSENGER AND GOODS PASSENGER LIFTS - PART 71: VANDAL RESISTANT LIFTS |
| NF EN 15166 : 2009 | FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS |
| XP S61 547 : 2007 XP | FIREFIGHTING EQUIPMENT - PARTICULAR COMPLEMENTARY DISPOSITIONS FOR TURNTABLE LADDERS |
| NF EN 1114-3 : 2001 + A1 2008 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS |
| NF EN 1672-2 : 2005 + A1 2009 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 2: HYGIENE REQUIREMENTS |
| NF EN 528 : 2008 | RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS |
| NF EN 474-2 : 2007 + A1 2008 | EARTH-MOVING MACHINERY - SAFETY - PART 2: REQUIREMENTS FOR TRACTOR-DOZERS |
| NF EN 474-11 : 2007 + A1 2008 | EARTH-MOVING MACHINERY - SAFETY - PART 11: REQUIREMENTS FOR EARTH AND LANDFILL COMPACTORS |
| NF EN 474-6 : 2007 + A1 2009 | EARTH-MOVING MACHINERY - SAFETY - PART 6: REQUIREMENTS FOR DUMPERS |
| NF EN 13862 : 2002 + A1 2009 | FLOOR CUTTING-OFF MACHINES - SAFETY |
| NF EN 474-12 : 2007 + A1 2008 | EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS |
| NF EN 12418 : 2000 + A1 2009 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| NF EN 474-7 : 2007 + A1 2009 | EARTH-MOVING MACHINERY - SAFETY - PART 7: REQUIREMENTS FOR SCRAPERS |
| NF EN 474-9 : 2007 + A1 2009 | EARTH-MOVING MACHINERY - SAFETY - PART 9: REQUIREMENTS FOR PIPELAYERS |
| NF EN 474-8 : 2007 + A1 2009 | EARTH-MOVING MACHINERY - SAFETY - PART 8: REQUIREMENTS FOR GRADERS |
| NF EN 62061 : 2005 AMD 2 2015 | SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS |
| NF EN 15164 : 2008 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN AND BELT SLOTTING MACHINES |
| NFE 61 120 : 2007 | PRODUCTION SYSTEMS INCLUDING MANIPULATING INDUSTRIAL ROBOTS - SAFETY REQUIREMENTS FOR ROBOT SYSTEMS |
| XP S61 512 : 2006 XP | FIREFIGHTING AND RESCUE SERVICE VEHICLES - FIREFIGHTING AND RESCUE TENDERS - ROAD RESCUE WATER TENDER TYPES FPTLSR AND FPTSR |
| NF EN ISO 8230-1 : 2008 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
| XP CEN/TS 13001 3-2 : 2008 XP | CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| NF EN 13411-7 : 2006 + A1 2008 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET |
| NF EN 12301 : 2000 + A1 2008 | PLASTICS AND RUBBER MACHINES - CALENDARS - SAFETY REQUIREMENTS |
| NF EN 13155 : 2003 + A2 2009 | CRANES - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS |
| NF EN 1010-5 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 5: MACHINES FOR THE PRODUCTION OF CORRUGATED BOARD AND MACHINES FOR THE CONVERSION OF FLAT AND CORRUGATED BOARD |
| NF EN 913 : 2009 | GYMNASTIC EQUIPMENT - GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
| NF EN 60335 2-92 : 2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-92: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED MAINS-OPERATED LAWN SCARIFIES AND AERATORS |
| UTEC 79 160 : 2008 | SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS |
| XP CEN/TS 13778 : 2005 XP | MOBILE DEMOLITION MACHINERY - SAFETY REQUIREMENTS |
| NF EN ISO 8230-3 : 2008 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 3: MACHINES USING COMBUSTIBLE SOLVENTS |
| NF CEN/TS 13001-3-1 : 2005 XP | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
| NF EN 703 : 2004 + A1 2009 | AGRICULTURAL MACHINERY - SILAGE LOADING, MIXING AND/OR CHOPPING AND DISTRIBUTING MACHINES - SAFETY |
| NF EN 15061 : 2007 + A1 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| NF EN 81-40 : 2008 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY |
| NF ISO 5707 : 2007 | MILKING MACHINE INSTALLATIONS - CONSTRUCTION AND PERFORMANCE |
| NF EN 1829-2 : 2008 | HIGH-PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 2: HOSES, HOSE LINES AND CONNECTORS |
| NF EN 60335-2-77 : 2011 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS |
| NF EN 61310-2 : 2008 | SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING |
| NF EN 15162 : 2008 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR GANG SAWS |
| NF EN 15573 : 2008 | EARTH-MOVING MACHINERY - DESIGN REQUIREMENTS FOR CIRCULATION ON THE ROAD |
| NF EN 15093 : 2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
| NF EN 1501-3 : 2008 | REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICE - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES |
| NF EN 12012-1 : 2007 + A1 2008 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS |
| NF EN 415-8 : 2008 | SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES |
| NF EN 15000 : 2008 | SAFETY OF INDUSTRIAL TRUCKS - SELF PROPELLED VARIABLE REACH TRUCKS - SPECIFICATION, PERFORMANCE AND TEST REQUIREMENTS FOR LONGITUDINAL LOAD MOMENT INDICATORS AND LONGITUDINAL LOAD MOMENT LIMITERS |
| NF EN 1218-2 : 2004 + A1 2010 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS |
| NF EN 692 : 2006 + A1 2009 | MACHINE TOOLS - MECHANICAL PRESSES - SAFETY |
| NF EN 13814 : 2007 | FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.