NFC 33 062 : 1999
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
INSULATED CABLES AND THEIR ACCESSORIES FOR POWER SYSTEMS - SF6 INSULATED METAL ENCLOSED TERMINATIONS FOR SINGLE-CORE CABLES WITH POLYMERIC EXTRUDED INSULATION FOR RATED VOLTAGES ABOVE 30 KV (UM EQUAL TO 36 KV) UP TO 500 KV (UM EQUAL TO 525 KV)
01-08-2008
12-01-2013
AVANT-PROPOS
1 Généralités
1.1 Domaine d'application
1.2 Références normatives
1.3 Définitions
1.4 Tension assignée
1.5 Renseignements à fournir lors d'une commande
2 Capacité de transport
3 Constitution des extrémités
4 Caractéristiques des constituants
4.1 Choix des matériaux
4.2 Caractéristiques dimensionnelles
4.3 Caractéristiques électriques
4.4 Caractéristiques mécaniques
4.5 Diélectrique gazeux
4.6 Enveloppe métallique et cloison isolante
5 Installation sur le site
6 Essais de type
6.1 Essais de courte durée de l'isolation
6.2 Essais de décharges partielles
6.3 Essais diélectriques sur l'embase
6.4 Essai de longue durée avec cycles thermiques
6.5 Essais d'étanchéité
6.6 Essai de court-circuit de la prise d'écran
7 Essais après pose
7.1 Essai diélectrique de l'isolation
7.2 Essais d'isolement de l'embase
8 Limite des fournitures et des prestations
8.1 Câbleur
8.2 Constructeur du matériel sous enveloppe métallique
9 Partage des responsabilités
9.1 Câbleur
9.2 Constructeur du matériel sous enveloppe métallique
10 Procédure d'acceptation de type
11 Extension de l'acceptation de type en fonction de la
section
12 Extension de l'acceptation de type en fonction de la
tension
Annexe A (normative) - Figures et tableaux
Annexe B (normative) - Disposition pour la connexion des
résistances non linéaires
Annexe C (normative) - Modalités des essais sous pluie
Annexe D (informative) - Conditions de fonctionnement sur
le réseau électrique français
Annexe E (informative) - Calcul du courant de court-circuit
en tenant compte des effets de l'asymétrie
supposée maximale
| DevelopmentNote |
Indice de Classement: C33-062 (04/2003)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| NFC 33 064 : 1999 | INSULATED CABLES AND THEIR ACCESSORIES FOR POWER SYSTEMS - INDOOR OR OUTDOOR POLYMERIC TERMINATIONS, WITHOUT PORCELAIN INSULATOR, FOR SINGLE-CORE CABLES WITH POLYMERIC EXTRUDED INSULATION FOR RATED VOLTAGES ABOVE 30 KV (UM EQUAL TO 36 KV) UP TO 150 KV (UM EQUAL TO 170 KV) |
| NFC 33 065 : 2001 XP | INSULATED CABLES AND THEIR ACCESSORIES FOR POWER SYSTEMS - SELF SUPPORTING OUTDOOR POLYMERIC TERMINATIONS OF TERMINATIONS WITH A COMPOSITE HOUSING, WITHOUT PORCELAIN INSULATOR, FOR SINGLE-CORE CABLES WITH POLYMERIC EXTRUDED INSULATION FOR RATED VOLTAGES ABOVE 150 KV (UM = 170 KV) UP TO 500 KV (UM = 550 KV) |
| NFC 33 063 : 1999 | INSULATED CABLES AND THEIR ACCESSORIES FOR POWER SYSTEMS - OUTDOOR TERMINATIONS, WITH PORCELAIN INSULATOR, FOR SINGLE-CORE CABLES WITH POLYMERIC EXTRUDED INSULATION FOR RATED VOLTAGES ABOVE 30 KV (UM EQUAL TO 36 KV) UP TO 500 KV (UM EQUAL TO 525 KV) |
| NF EN 20286-2 : 1993 | ISO SYSTEM OF LIMITS AND FITS - PART 2: TABLES OF STANDARD TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
| IEC 60228:2004 | Conductors of insulated cables |
| IEC 60502-2:2014 RLV | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV) – Part 2: Cables for rated voltages from 6 kV (<em>U</em><sub>m</sub> = 7,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV) |
| NFC 33 253 : 2006 | INSULATED CABLES FOR POWER SYSTEMS - SINGLE-CORE CABLES WITH POLYMERIC INSULATION FOR RATED VOLTAGES ABOVE 150 KV (UM = 170 KV) UP TO 500 KV (UM = 525 KV) |
| NF EN 60071-1 : 2006 AMD 1 2010 | INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES |
| NFC 33 220 : 88 AMD 1 88 | INSULATED OR PROTECTED CABLES FOR POWER SYSTEMS - EXTRUDED SOLID DIELECTRIC INSULATED CABLES FOR RATED VOLTAGES FROM 1.8/3(3.6) KV UP TO 18/30(36) KV |
| NFC 63 061 : 1973 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONNECTION JOINTS FOR CONDUCTORS ONE AT LEAST OF THEM BEING AN INSULATED ALUMINIUM OR ALUMINIUM ALLOY CONDUCTOR - ELECTRICAL TEST REQUIREMENTS |
| NFC 33 252 : 2002 | TESTS FOR POWER CABLES WITH EXTRUDED INSULATION FOR RATED VOLTAGES ABOVE 30kV (Um=36kV) UP TO 150 kV (Um=170kV) |
| IEC 60376:2005 | Specification of technical grade sulfur hexafluoride (SF<sub>6</sub>) for use in electrical equipment |
| IEC 60517:1990 | Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above |
| IEC 60230:1966 | Impulse tests on cables and their accessories |
| HD 383 : S2 AMD 2 | CONDUCTORS OF INSULATED CABLES - GUIDE TO THE DIMENSIONAL LIMITS OF CIRCULAR CONDUCTORS |
| NFC 32 013 : 1981 | INSULATED CABLES AND FLEXIBLE CORDS - CONDUCTORS OF INSULATED CABLES |
| NFC 27 601 : 1978 | SPECIFICATION AND ACCEPTANCE OF NEW SULFUR HEXAFLUORIDE |
| IEC 60376B:1974 | Second supplement: Clause 26 |
| IEC 60050-461:2008 | International Electrotechnical Vocabulary (IEV) - Part 461: Electric cables |
| NF EN 60811 1-1 : 96 AMD 1 2001 | INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - PART 1: GENERAL APPLICATION - SECTION 1: MEASUREMENT OF THICKNESS AND OVERALL DIMENSIONS - TESTS FOR DETERMINING THE MECHANICAL PROPERTIES |
| IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| NF EN 60811 1-2 : 96 AMD 2 2001 | INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - PART 1: GENERAL APPLICATION - SECTION 2: THERMAL AGEING METHODS |
| IEC 60376A:1973 | First supplement: Section Thirteen: Mineral oil content |
| IEC 60885-2:1987 | Electrical test methods for electric cables. Part 2: Partial discharge tests |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.