NFPA 704 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
STANDARD SYSTEM FOR THE IDENTIFICATION OF THE HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE
Hardcopy
16-08-2021
English
01-01-2017
Chapter 1 - Administration
Chapter 2 - Referenced Publications
Chapter 3 - Definitions
Chapter 4 - General
Chapter 5 - Health Hazards
Chapter 6 - Flammability Hazards
Chapter 7 - Instability Hazards
Chapter 8 - Special Hazards
Chapter 9 - Identification of Materials by Hazard Rating
System
Annex A - Explanatory Material
Annex B - Health Hazard Rating
Annex C - Flammability
Annex D - Combustible Dusts
Annex E - Instability, Thermal Hazard Evaluation Techniques
Annex F - Water Reactivity Identification Criteria
Annex G - Comparison of NFPA 704 Numerical Hazard Rating
with OSHAs Hazard Classification System
Annex H - Sample NFPA 704 Placard Information for Use in
Safety Publications
Annex I - Informational References
Index
Describes the health, flammability, instability, and related hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies.
DevelopmentNote |
2012 Edition available in Spanish Language, See NFPA 704 SPANISH. (02/2014)
|
DocumentType |
Standard
|
Pages |
37
|
PublisherName |
National Fire Protection Association
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
NFPA 434 : 2002 | CODE FOR THE STORAGE OF PESTICIDES |
NFPA 43C : 1986 | STORAGE OF GASEOUS OXIDIZING MATERIALS |
API 570 REDLINE : 2009 | PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
NFPA 61B : 1989 | PREVENTION OF FIRES AND EXPLOSIONS IN GRAIN ELEVATORS AND FACILITIES HANDLING BULK RAW AGRICULTURAL COMMODITIES |
ASTM D 6668 : 2001 | Standard Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1 |
ASTM E 1231 : 2015 : REDLINE | Standard Practice for Calculation of Hazard Potential Figures of Merit for Thermally Unstable Materials |
ASTM D 3852 : 2016 : REDLINE | Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid |
NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
NFPA 45 : 2015 | FIRE PROTECTION FOR LABORATORIES USING CHEMICALS |
NFPA 51A : 2012 | ACETYLENE CYLINDER CHARGING PLANTS |
NFPA 407 : 2017 | AIRCRAFT FUEL SERVICING |
NFPA 307 : 2016 | CONSTRUCTION AND FIRE PROTECTION OF MARINE TERMINALS, PIERS, AND WHARVES |
NFPA 170 : 2018 | FIRE SAFETY AND EMERGENCY SYMBOLS |
NFPA 5000 : 2018 | BUILDING CONSTRUCTION AND SAFETY CODE |
NFPA 400 : 2016 | HAZARDOUS MATERIALS CODE |
NFPA 850 : 2015 | FIRE PROTECTION FOR ELECTRIC GENERATING PLANTS AND HIGH VOLTAGE DIRECT CURRENT CONVERTER STATIONS |
IEEE 1657-2009 | IEEE Recommended Practice for Personnel Qualifications for Installation and Maintenance of Stationary Batteries |
P-W-2891 Revision A:2002 | WIPE SOLVENTS, EXEMPT AND NON-EXEMPT |
ASTM D 6668 : 2001 : R2016 | Standard Test Method for Discrimination Between Flammability Ratings of F = 0 <brk />and F = 1 |
API 2217A REDLINE : 2009 | GUIDELINES FOR SAFE WORK IN INERT CONFINED SPACES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
BS ISO 17687:2007 | Transport information and control systems(TICS). General fleet management and commercial freight operations. Data dictionary and message setsfor electronic identification and monitoring of hazardousmaterials/dangerous goods transportation |
MIL-STD-161 Revision H:2015 | IDENTIFICATION METHODS FOR BULK PETROLEUM PRODUCTS SYSTEMS INCLUDING HYDROCARBON MISSILE FUELS |
02/211311 DC : DRAFT NOV 2002 | ISO 17687 - TRANSPORT INFORMATION AND CONTROL SYSTEMS (TICS) - GENERAL FLEET MANAGEMENT AND COMMERCIAL FREIGHT OPERATIONS - DATA DICTIONARY AND MESSAGE SETS FOR ELECTRONIC IDENTIFICATION AND MONITORING OF HAZARDOUS MATERIALS/DANGEROUS GOODS TRANSPORTATION |
NFPA 1072:2017 | HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION EMERGENCY RESPONSE PERSONNEL PROFESSIONAL QUALIFICATIONS |
NFPA 49 : 1994 | HAZARDOUS CHEMICALS DATA |
NFPA 1125 : 2017 | MANUFACTURE OF MODEL ROCKET AND HIGH-POWER ROCKET MOTORS |
ASCE/SEI 41 13 : 2014 | SEISMIC EVALUATION AND RETROFIT OF EXISTING BUILDINGS |
ASTM D 6253 : 2016 : REDLINE | Standard Practice for Treatment and/or Marking of Wood Packaging Materials |
NFPA 1992 : 2018 | LIQUID SPLASH-PROTECTIVE ENSEMBLES AND CLOTHING FOR HAZARDOUS MATERIALS EMERGENCIES |
NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
NFPA 52 : 2016 | VEHICULAR NATURAL GAS FUEL SYSTEMS CODE |
NFPA 120 : 2015 | FIRE PREVENTION AND CONTROL IN COAL MINES |
NFPA 318 : 2018 | PROTECTION OF SEMICONDUCTOR FABRICATION FACILITIES |
ICC 2012 INTERNATIONAL BUILDING CODE : 2012 | INTERNATIONAL BUILDING CODE |
NASA-STD-8719.11B:2020 | STANDARD FOR FIRE PROTECTION AND LIFE SAFETY |
NFPA 99C : 2005 | GAS AND VACUUM SYSTEMS |
NFPA 1 : 2021 | FIRE CODE |
UFC 3-460-01 : Change 3 | UNIFIED FACILITIES CRITERIA - DESIGN: PETROLEUM FUEL FACILITIES |
UFC 3-600-01 : Change 2 | UNIFIED FACILITIES CRITERIA - FIRE PROTECTION ENGINEERING FOR FACILITIES |
NFPA 32 : 2016 | DRYCLEANING FACILITIES |
API RP 2207 : 2017 | PREPARING TANK BOTTOMS FOR HOT WORK |
NFPA 430 : 2004 | STORAGE OF LIQUID AND SOLID OXIDIZERS |
NFPA 432 : 2002 | CODE FOR THE STORAGE OF ORGANIC PEROXIDE FORMULATIONS |
NFPA 43A : 1990 | STORAGE OF LIQUID AND SOLID OXIDIZERS |
API 2217A : 2009 | SAFE WORK IN INERT CONFINED SPACES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
IEEE DRAFT 1512.4 : 2006 | COMMON TRAFFIC INCIDENT MANAGEMENT MESSAGE SETS FOR USE IN ENTITIES EXTERNAL TO CENTERS |
ASTM D 6668 : 2001 : R2006 | Standard Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1 |
NFPA 472 : 2018 | COMPETENCE OF RESPONDERS TO HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION INCIDENTS |
NFPA 61 : 2017 | PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES |
NFPA 485 : 1999 | STORAGE, HANDLING, PROCESSING, AND USE OF LITHIUM METAL |
NFPA 1991 : 2016 | Standard on Vapor-Protective Ensembles for Hazardous Materials Emergencies |
NFPA 475 : 2017 | RECOMMENDED PRACTICE FOR ORGANIZING, MANAGING, AND SUSTAINING A HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION RESPONSE PROGRAM |
NFPA 1500 : 2018 | FIRE DEPARTMENT OCCUPATIONAL SAFETY, HEALTH, AND WELLNESS PROGRAM |
NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
ISO 817:2014 | Refrigerants — Designation and safety classification |
UL 1993:5ED 2017-01-27 | Self-Ballasted Lamps and Lamp Adapters |
NFPA 61 : 2020 | PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES |
ICC IBC CODE AND COMMENTARY VOLUME 2 : 2015 | IBC® Code and Commentary, Volume 2 |
ICC 2012 INTERNATIONAL FIRE CODE : 2012 | INTERNATIONAL FIRE CODE |
ICC IMC Code and Commentary : 2015 | IMC® Code and Commentary |
C22.2 NO. 1993-17 | Self-ballasted lamps and lamp adapters (Trinational standard with NMX-J-578/1-ANCE and UL 1993) |
ICC IFC CODE & COMMENTARY VOLUME 1 & 2 : 2015 | IFC® Code and Commentary |
NASA STD 8719.11 : 2008 | SAFETY STANDARD FOR FIRE PROTECTION |
NFPA 325M : 1991 | FIRE HAZARD PROPERTIES OF FLAMMABLE LIQUIDS, GASES, AND VOLATILE SOLIDS |
SAE J2990_201211 | Hybrid and EV First and Second Responder Recommended Practice |
NFPA 1999 : 2018 | PROTECTIVE CLOTHING AND ENSEMBLES FOR EMERGENCY MEDICAL OPERATIONS |
ISO 17687:2007 | Transport Information and Control Systems (TICS) General fleet management and commercial freight operations Data dictionary and message sets for electronic identification and monitoring of hazardous materials/dangerous goods transportation |
NFPA 115 : 2016 | LASER FIRE PROTECTION |
API 570 : 2016 | PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
SAE J2578_201408 | Recommended Practice for General Fuel Cell Vehicle Safety |
NFPA 484 : 2015 | COMBUSTIBLE METALS |
NFPA 1994 : 2018 | PROTECTIVE ENSEMBLES FOR FIRST RESPONDERS TO HAZARDOUS MATERIALS EMERGENCIES AND CBRN TERRORISM INCIDENTS |
API RP 2021 : 2001 | MANAGEMENT OF ATMOSPHERIC STORAGE TANK FIRES |
API 2021 : 2001 : R2006 | MANAGEMENT OF ATMOSPHERIC STORAGE TANK FIRES |
API 570 CHINESE : 2009 | PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
NFPA 81 : 1986 | FUR STORAGE, FUMIGATION AND CLEANING |
ASTM D 6668 : 2001 : R2010 | Standard Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1 |
ASTM D 3698 : 2004 : R2010 | Standard Practice for Solvent Vapor Degreasing Operations |
ASTM D 3698 : 2004 | Standard Practice for Solvent Vapor Degreasing Operations |
BS ISO 817 : 2014 | REFRIGERANTS - DESIGNATION AND SAFETY CLASSIFICATION |
NFPA 473 : 2018 | COMPETENCIES FOR EMS PERSONNEL RESPONDING TO HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION INCIDENTS |
API 99 : 2014 | FLASH FIRE RISK ASSESSMENT FOR THE UPSTREAM OIL AND GAS INDUSTRY |
NFPA 68 : 2018 | EXPLOSION PROTECTION BY DEFLAGRATION VENTING |
API 574 : 2016 | INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
API 2021 : 2001 : R2015 | MANAGEMENT OF ATMOSPHERIC STORAGE TANK FIRES |
NFPA 350 : 2016 | SAFE CONFINED SPACE ENTRY AND WORK |
NFPA 61D : 1989 | PREVENTION OF FIRE AND DUST EXPLOSIONS IN THE MILLING OF AGRICULTURAL COMMODITIES FOR HUMAN CONSUMPTION |
NFPA 61A : 1989 | PREVENTION OF FIRE AND DUST EXPLOSIONS IN FACILITIES MANUFACTURING AND HANDLING STARCH |
NFPA 61C : 1989 | PREVENTION OF FIRE AND DUST EXPLOSION IN FEED MILLS |
NFPA 30 FRENCH : 1996 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
ASTM D 3698 : 2004 : R2015 | Standard Practice for Solvent Vapor Degreasing Operations |
NFPA 1 : 2018 | FIRE CODE |
ICC 2012 INTERNATIONAL MECH. CODE : 2012 | INTERNATIONAL MECHANICAL CODE |
NFPA 400 : 2019 | Hazardous Materials Code |
ICC IMC International Mechanical Code : 2021 | International Mechanical Code |
NFPA 318:2022 | Standard for the Protection of Semiconductor Fabrication Facilities |
ICC IBC INTERNATIONAL BUILDING CODE:2021 | International Building Code |
NFPA 307:2021 | Standard for the Construction and Fire Protection of Marine Terminals, Piers, and Wharves |
NFPA 850:2020 | Recommended Practice for Fire Protection for Electric Generating Plants and High Voltage Direct Current Converter Stations |
NFPA 318:2025 | Standard for the Protection of Semiconductor Fabrication Facilities |
ICC IMC CODE AND COMMENTARY:2021 | IMC® Code and Commentary |
NBR 17505-4 : 2013 | STORAGE OF FLAMMABLE AND COMBUSTIBLE LIQUIDS - PART 4: STORAGE CONTAINERS AND PORTABLE TANKS UP TO 3000 L |
NFPA 652 : 2016 | FUNDAMENTALS OF COMBUSTIBLE DUST |
NFPA 495 : 2013 | EXPLOSIVE MATERIALS CODE |
ASTM D 2879 : 2010-10 | TEST METHOD FOR VAPOR PRESSURE-TEMPERATURE RELATIONSHIP AND INITIAL DECOMPOSITION TEMPERATURE OF LIQUIDS BY ISOTENISCOPE |
NFPA 654 : 2017 | PREVENTION OF FIRE AND DUST EXPLOSIONS FROM THE MANUFACTURING, PROCESSING, AND HANDLING OF COMBUSTIBLE PARTICULATE SOLIDS |
NFPA 400 : 2016 | HAZARDOUS MATERIALS CODE |
CFR 16(PTS1000-END) : 0 | COMMERCIAL PRACTICES - FEDERAL TRADE COMMISSION - CONSUMER PRODUCT SAFETY COMMISSION |
CFR 49(PTS100-177) : OCT 2017 | TRANSPORTATION |
ASTM E 502 : 2007 | Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods |
ASTM D 86 : 2017-06 | TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE |
ASTM E 1515 : 2014 : REDLINE | Standard Test Method for Minimum Explosible Concentration of Combustible Dusts |
NFPA 664 : 2017 | PREVENTION OF FIRES AND EXPLOSIONS IN WOOD PROCESSING AND WOODWORKING FACILITIES |
NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
NFPA 1 : 2018 | FIRE CODE |
NFPA FIRE PROT GUIDE ON HAZARDOUS MAT : 2010 | FIRE PROTECTION GUIDE TO HAZARDOUS MATERIALS |
NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
ASTM E 537 : 2012 : REDLINE | Standard Test Method for The Thermal Stability of Chemicals by Differential Scanning Calorimetry |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.