PD ISO/TS 16688:2017
Current
Current
The latest, up-to-date edition.
Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
11-01-2018
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Types of environment
6 Classification of coatings
7 Coating selection for different
environments
8 Durability tests
9 Selection of test methods to
enable the comparison of different
coating types for service in different
environments
10 Methods of measuring performance
Annex A (informative) - Recommended
cleaning procedures for coated
aluminium architectural materials
Bibliography
Describes a system to select coating types for architectural applications depending on environment.
| Committee |
NFE/35
|
| DocumentType |
Standard
|
| Pages |
44
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This document establishes a system to select coating types for architectural applications depending on environment. It gives guidelines for the selection of tests and methods of measuring performance in terms that are of direct interest to the building designer.
This document is applicable to organic and anodic oxidation (AAO) coatings on aluminium, including those produced from liquid and powder paints, and combined coatings of organic and anodic oxidation coatings. It is designed to be applicable to novel coatings developed in the future.
| Standards | Relationship |
| ISO/TS 16688:2017 | Identical |
| ISO 7599:2010 | Anodizing of aluminium and its alloys General specifications for anodic oxidation coatings on aluminium |
| ISO 9223:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation |
| ISO 3210:2017 | Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) |
| ISO 8993:2010 | Anodizing of aluminium and its alloys Rating system for the evaluation of pitting corrosion Chart method |
| ISO 10215:2010 | Anodizing of aluminium and its alloys Visual determination of image clarity of anodic oxidation coatings Chart scale method |
| ISO 7759:2010 | Anodizing of aluminium and its alloys — Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer |
| ISO 3211:2010 | Anodizing of aluminium and its alloys Assessment of resistance of anodic oxidation coatings to cracking by deformation |
| ISO 7668:2010 | Anodizing of aluminium and its alloys Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees |
| ISO 14577-4:2016 | Metallic materials Instrumented indentation test for hardness and materials parameters Part 4: Test method for metallic and non-metallic coatings |
| ISO 2106:2011 | Anodizing of aluminium and its alloys Determination of mass per unit area (surface density) of anodic oxidation coatings Gravimetric method |
| ISO 11303:2002 | Corrosion of metals and alloys — Guidelines for selection of protection methods against atmospheric corrosion |
| ISO 4623-2:2016 | Paints and varnishes Determination of resistance to filiform corrosion Part 2: Aluminium substrates |
| ISO 15181-1:2007 | Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 1: General method for extraction of biocides |
| ISO 4516:2002 | Metallic and other inorganic coatings — Vickers and Knoop microhardness tests |
| ISO 8994:2011 | Anodizing of aluminium and its alloys Rating system for the evaluation of pitting corrosion Grid method |
| ISO 6270-1:1998 | Paints and varnishes Determination of resistance to humidity Part 1: Continuous condensation |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| ISO 1520:2006 | Paints and varnishes Cupping test |
| ISO 8251:2011 | Anodizing of aluminium and its alloys Measurement of abrasion resistance of anodic oxidation coatings |
| ISO 2376:2010 | Anodizing of aluminium and its alloys Determination of electric breakdown potential |
| ISO/TS 80004-8:2013 | Nanotechnologies Vocabulary Part 8: Nanomanufacturing processes |
| EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| ISO 16781:2013 | Space systems Simulation requirements for control system |
| ISO 1463:2003 | Metallic and oxide coatings Measurement of coating thickness Microscopical method |
| ISO 4378-2:2017 | Plain bearings — Terms, definitions, classification and symbols — Part 2: Friction and wear |
| ISO 28340:2013 | Combined coatings on aluminium — General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium |
| ISO 14993:2001 | Corrosion of metals and alloys Accelerated testing involving cyclic exposure to salt mist, "dry" and "wet" conditions |
| ISO 15184:2012 | Paints and varnishes Determination of film hardness by pencil test |
| ISO 3248:2016 | Paints and varnishes Determination of the effect of heat |
| ISO 12137:2011 | Paints and varnishes — Determination of mar resistance |
| ISO 2128:2010 | Anodizing of aluminium and its alloys — Determination of thickness of anodic oxidation coatings — Non-destructive measurement by split-beam microscope |
| EN 13523-21:2017 | Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels |
| ISO 2810:2004 | Paints and varnishes Natural weathering of coatings Exposure and assessment |
| ISO 10216:2017 | Anodizing of aluminium and its alloys — Instrumental determination of image clarity of anodic oxidation coatings — Instrumental method |
| ISO 17872:2007 | Paints and varnishes Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing |
| ISO 4624:2016 | Paints and varnishes — Pull-off test for adhesion |
| ISO 12944-2:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments |
| ISO 1522:2006 | Paints and varnishes — Pendulum damping test |
| ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 2: Elastomers |
| ISO 2143:2017 | Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodic oxidation coatings after sealing — Dye-spot test with prior acid treatment |
| ISO 7583:2013 | Anodizing of aluminium and its alloys — Terms and definitions |
| ISO 16348:2003 | Metallic and other inorganic coatings Definitions and conventions concerning appearance |
| ISO 11998:2006 | Paints and varnishes — Determination of wet-scrub resistance and cleanability of coatings |
| ISO 2815:2003 | Paints and varnishes Buchholz indentation test |
| ISO 15686-1:2011 | Buildings and constructed assets — Service life planning — Part 1: General principles and framework |
| EN 13523-19:2011 | Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing |
| EN 15530:2008 | Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines for their inclusion in standards |
| ISO 4618:2014 | Paints and varnishes — Terms and definitions |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| BS 4842:1984 | Specification for liquid organic coatings for application to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with liquid organic coatings |
| ISO 1519:2011 | Paints and varnishes Bend test (cylindrical mandrel) |
| ISO 2085:2010 | Anodizing of aluminium and its alloys Check for continuity of thin anodic oxidation coatings Copper sulfate test |
| EN 12206-1:2004 | Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder |
| ISO 11503:1995 | Paints and varnishes — Determination of resistance to humidity (intermittent condensation) |
| ISO 6719:2010 | Anodizing of aluminium and its alloys — Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments |
| ISO 2931:2010 | Anodizing of aluminium and its alloys Assessment of quality of sealed anodic oxidation coatings by measurement of admittance |
| DIN 17611:2011-11 | Anodized products of aluminium and wrought aluminium alloys - Technical conditions of delivery |
| ISO 6581:2010 | Anodizing of aluminium and its alloys Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| ISO 8565:2011 | Metals and alloys Atmospheric corrosion testing General requirements |
| ISO 10289:1999 | Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates Rating of test specimens and manufactured articles subjected to corrosion tests |
| ISO 6860:2006 | Paints and varnishes Bend test (conical mandrel) |
| ISO 2135:2017 | Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light |
| ISO 2813:2014 | Paints and varnishes — Determination of gloss value at 20°, 60° and 85° |
| ISO 3231:1993 | Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.