|
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories |
|
FED-STD-313 Revision D:1996
|
MATERIAL SAFETY DATA, TRANSPORTATION DATA AND DISPOSAL DATA FOR HAZARDOUS MATERIALS FURNISHED TO GOVERNMENT ACTIVITIES |
|
SAE AMS S 8802 : 2015
|
SEALING COMPOUND, FUEL RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES |
|
SAE AMS 1640 : 2011
|
CORROSION REMOVING COMPOUND, FOR AIRCRAFT SURFACES |
|
ANSI Z400.1 : 2004
|
HAZARDOUS INDUSTRIAL CHEMICALS - MATERIAL SAFETY DATA SHEETS - PREPARATION |
|
MIL-PRF-81733 Revision D:1998
|
SEALING AND COATING COMPOUND, CORROSION INHIBITIVE |
|
MIL-PRF-7808 Revision L:1997
|
LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
|
MIL-PRF-85285 Revision E:2012
|
COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT |
|
SAE AMS QQ A 250/4 : 2015
|
ALUMINUM ALLOY 2024, PLATE AND SHEET |
|
ASTM G 85 : 2011 : REDLINE
|
Standard Practice for Modified Salt Spray (Fog) Testing |
|
MIL-PRF-23377 Revision K:2012
|
PRIMER COATINGS: EPOXY, HIGH-SOLIDS |
|
SAE AS 5127/1 : 2014
|
AEROSPACE STANDARD TEST METHODS FOR AEROSPACE SEALANTS TWO-COMPONENT SYNTHETIC RUBBER COMPOUNDS |
|
SAE AMS 3277 : 2015
|
SEALING COMPOUND, POLYTHIOETHER RUBBER, FAST CURING FOR INTEGRAL FUEL TANKS AND GENERAL PURPOSE, INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C) |
|
MIL-DTL-5541 Revision F:2006
|
Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
|
TT-R-2918 Revision A:2001
|
REMOVAL, PAINT, NO HAZARDOUS AIR POLLUTANTS (HAPS) |
|
ASTM D 1974 : 1998
|
Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes |
|
ASTM D 2247 : 2015 : REDLINE
|
Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity |
|
MIL-PRF-23699 Revision G:2014
|
Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
|
ISO 11890-1:2007
|
Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method |
|
SAE AMS QQ A 250/5 : 2014
|
ALUMINUM ALLOY ALCLAD 2024, PLATE AND SHEET |
|
CFR 29(PT1910.1000 TO END) : 0
|
LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
|
MIL A 8625 : F
|
ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
|
ASTM D 7091 : 2013 : REDLINE
|
Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
|
SAE AMS 2629 : 2017
|
FLUID, JET REFERENCE |
|
SAE AS 1241 : 2016
|
FIRE RESISTANT PHOSPHATE ESTER HYDRAULIC FLUID FOR AIRCRAFT |
|
ASTM D 2794 : 1993
|
TEST METHOD FOR RESISTANCE OF ORGANIC COATINGS TO THE EFFECTS OF RAPID DEFORMATION (IMPACT) |
|
MIL-PRF-83282 Revision D:1997
|
HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
|
SAE AMS 2825 : 1987
|
MATERIAL SAFETY DATA SHEETS |
|
MIL-PRF-85582 Revision E:2012
|
PRIMER COATINGS: EPOXY, WATERBORNE |
|
FED-STD-141 Revision D:2001
|
PAINT, VARNISH, LACQUER AND RELATED MATERIALS, METHODS OF INSPECTION, SAMPLING AND TESTING |
|
ASTM D 522 : 1993 : REV A
|
Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
|
ASTM D 3359 : 2017 : REDLINE
|
Standard Test Methods for Rating Adhesion by Tape Test |
|
ASTM D 329 : 2007
|
Standard Specification for Acetone |