SAE AMS5645S
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 10Ni - 0.40Ti (321) Solution Heat Treated
Available format(s)
Hardcopy , PDF
Superseded date
01-02-2022
Superseded by
Language(s)
English
Published date
28-03-2016
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
This specification covers a corrosion and heat resistant steel in the form of forgings over 0.50 inch (12.7 mm) in nominal diameter or least distance between parallel sides, wire, bars, and mechanical tubing, flash welded rings, and stock of any size for forging or flash welded rings (see 8.6).
| DocumentType |
Standard
|
| Pages |
7
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This specification covers a corrosion and heat resistant steel in the form of forgings over 0.50 inch (12.7 mm) in nominal diameter or least distance between parallel sides, wire, bars, and mechanical tubing, flash welded rings, and stock of any size for forging or flash welded rings (see 8.6).
| Standards | Relationship |
| QQ-S-763 Revision F:1996 | Similar to |
| MIL-DTL-32371-10 Base Document:2012 | Fittings, Hydraulic Tube, Sleeve, Double Angle |
| SAE AS4841B | Fittings, 37° Internal Flare, Fluid Connection, Procurement Specification |
| SAE AS4444 | Fittings, 24° Cone Flareless, Fluid Connection, 5000 psi |
| SAE MA4098 | Hose Assembly, Polytetrafluoroethylene, Heavy Duty, Metallic Reinforced, 204 °C, 35 000 kPa Hydraulic and Pneumatic, Metric |
| AN915 Revision 14:2015 | ELBOW, PIPE, 45 DEGREES |
| MIL-DTL-32480 Base Document:2014 | Adapter, Hydraulic and Pneumatic, Flareless Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and Minus 65 Degrees Fahrenheit to Plus 250 Degrees Fahrenheit, General Specification for |
| 17/30369678 DC : 0 | PREN 7010 - AEROSPACE SERIES - USER GUIDE FOR CREATION AND DESIGNATION OF BOLTS |
| MS27086 Revision D:2013 | Elbow, Nipple End, Flared, Tube to Hose - 90 Degrees Swivel Nut |
| MS27087 Revision D:2013 | Elbow, Nipple End, Flared, Tube to Hose - 45 Degrees Swivel Nut |
| AN849 Revision 13:2015 | NIPPLE, HOSE |
| AN838 Revision 9:2011 | Elbow, Tube to Hose, 90 Degrees |
| BS ISO 8913:2006 | Aerospace. Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400°F/3000 psi (204°C/20684 kPa) and 204°C/21000 kPa (400°F/3046 psi). Procurement specification |
| MIL-DTL-32372 Revision A:2016 | Fitting, Adapter, Hydraulic and Pneumatic, NPTF to ORFS Connectors, 1500 to 3000 PSI and -65°F to 250°F |
| AN815 Revision 10:2015 | UNION - FLARED TUBE |
| AN6204 Revision L:2013 | Valve, Hydraulic Bleeder |
| SAE AS604E | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 °F, Heavyweight, Hydraulic |
| MS27076 Revision E:2013 | Nipple, Straight, Swivel Flange |
| AN846 Revision 9:2013 | ELBOW, HOSE, 45 DEGREES |
| SAE AS1472A | Hose Assembly, Low Pressure, Potable Water |
| MS27630 Revision B:2009 | ADAPTER ASSEMBLY, FLARELESS, 45 DEGREES ELBOW, TUBE TO HOSE-WITH SWIVEL NUT |
| SAE AS5951D | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 5080 psi (35000 kPa), 275 °F (135 °C), Aircraft Hydraulic Systems |
| SAE AS7473C | Bolts and Screws, Roll Threaded Procurement Specification For |
| SAE AS4098A | Hose Assembly, Polytetrafluoroethylene, Heavy Duty, Metallic Reinforced, 400 °F, 5000 psi Hydraulic and Pneumatic |
| SAE MA2126B | Hose Assembly, Polytetrafluoroethylene (PTFE), up to 232 °C and 10 500 kPa Procurement Specification, Metric (ISO/DIS 10502) |
| SAE AIR5693 | Compatibility of PTFE Hose Assemblies With Typical Fluids Found in Aerospace Applications |
| MIL-DTL-25579 Revision H:2014 | Hose Assembly, Polytetrafluoroethylene, High Temperature, Medium Pressure, General Specification for |
| MS27082 Revision E:2014 | ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 90 DEGREES |
| AN841 Revision 7:2013 | ADAPTER - HOSE TO FLARED TUBE |
| BS ISO 23933:2006 | Aerospace series. Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135°C/20 684 kPa (275°F/3 000 psi) and 135°C/21 000 kPa (275°F/3 046 psi). Procurement specification |
| MS27628 Revision B:2009 | ELBOW, FLARED, TUBE TO HOSE, 45 DEGREES, SWIVEL NUT |
| MS27627 Revision B:2009 | ELBOW, FLARED, TUBE TO HOSE, 90 DEGREES, SWIVEL NUT |
| AN842 Revision 13:2013 | ELBOW - PIPE TO HOSE, 90 DEGREES |
| AN844 Revision 13:2013 | ELBOW - PIPE TO HOSE, 45 DEGREES |
| AN807 Revision 7:2007 | Adapter, Straight, Tube to Hose |
| MIL-DTL-32464 Revision A:2017 | FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES SPHERICAL TO ANPT CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR |
| MIL-DTL-32371 Base Document:2012 | Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for |
| ISO 23933:2006 | Aerospace Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135 degrees C/20 684 kPa (275 degrees F /3 000 psi) and 135 degrees C/21 000 kPa (275 degrees F/3 046 psi) Procurement specification |
| SAE AS620G | Hose Assemblies, Convoluted Polytetrafluoroethylene Metallic Reinforced, High Temperature, Medium Pressure, Aircraft |
| SAE AS614D | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 4000 psi, 400 °F, Heavy Duty, Hydraulic and Pneumatic |
| SAE AS4468G | Hose Assembly, 125 psi, Lined Silicone, Potable Water, Procurement Specification |
| 05/30128217 DC : DRAFT JAN 2005 | ISO/DIS 23933 - AEROSPACE - ARAMID REINFORCED LIGHTWEIGHT POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES, CLASSIFICATION 135 DEGREE C/20 684 KPA (275 DEGREE F/3 000 PSI) AND 135 DEGREE C/21 000 KPA (275 DEGREE F/3 046 PSI) - PROCUREMENT SPECIFICATION |
| MIL-DTL-18866 Revision J:2015 | Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, General Specification for |
| MS27075 Revision D:2013 | NIPPLE, FLARED, TUBE TO HOSE - SWIVEL NUT |
| MS27769 Revision B:2011 | PLUG, PIPE, COUNTERSUNK HEX HEAD |
| MIL-DTL-32460 Revision A:2017 | ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR |
| MIL-DTL-83798 Revision D:2008 | FITTING, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
| AN914 Revision 11:2012 | ELBOW, PIPE, INTERNAL AND EXTERNAL THREAD, 90 DEGREES |
| SAE MA1339 | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 21,000 kPa, 204 °C, Lightweight, Hydraulic and Pneumatic, Metric |
| SAE AS4842A | Fittings and Bosses, Pipe Threaded, Fluid Connection |
| SAE AS1975G | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275 °F, Standard Duty, Hydraulic, Aircraft Systems |
| SAE MA1975 | Hose Assemblies, Polytetrafluoroethylene, Aramid Reinforced, 135 °C, Standard Duty, 28 000/21 000 kPa, Hydraulic, Aircraft Systems |
| SAE AS18280F | Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi |
| SAE AS5420G | Hose Assembly, Heated, 125 psig, Lined Silicone, Potable Water, Procurement Specification |
| NASA SSTD 8070 0122 : 2014 | PROCEDURE FOR GTAW OF 625 ALLOY TO 300 SERIES STAINLESS STEEL |
| MIL-DTL-52525 Revision F:2008 | FITTINGS, HOSE, HYDRAULIC, REUSABLE, FIELD-ATTACHABLE AND CLAMP-HALVES, TO MATE WITH SAE-J517 TYPE HOSES, GENERAL SPECIFICATION FOR |
| MIL-DTL-32434 Base Document:2013 | Hose Assembly, Polytetrafluoroethylene, Convoluted, High Temperature, Medium Pressure, General Specification for |
| MS27631 Revision B:2009 | ADAPTER ASSEMBLY, FLARELESS, 90 DEGREES ELBOW, TUBE TO HOSE-WITH SWIVEL NUT |
| SAE MA620 | Hose Assemblies, Convoluted Polytetrafluoroethylene Metallic Reinforced, High Temperature, Medium Pressure, Aircraft Metric |
| MIL-DTL-5070 Revision F:2006 | ADAPTER, HOSE TO TUBE, PIPE AND FLANGE, REUSABLE - HYDRAULIC, FUEL, AND OIL LINES, GENERAL SPECIFICATION FOR |
| AN848 Revision 13:2015 | Elbow, Hose, 90 Degree |
| AN 840 : 0011 | ADAPTER, STRAIGHT, PIPE TO HOSE |
| AN 839 : 0009 | ELBOW, TUBE TO HOSE, 45 DEGREES |
| SAE AS5960B | Hose Assembly, Polytetrafluoroethylene, Metallic Braid Reinforced, 5080 psi (35 000 kPa), 400 °F (204 °C), Aircraft Hydraulic Systems |
| MS27394 Revision C:2014 | ELBOW, FLARELESS, TUBE TO HOSE - 90 DEGREE SWIVEL NUT |
| SAE MA2100 | Hose Assemblies, Metal Medium Pressure, High Temperature, Metric |
| SAE AS1339H | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 °F, Lightweight, Hydraulic and Pneumatic |
| SAE AS1227C | Hose Assembly, Convoluted Polytetrafluoroethylene, Metallic Reinforced, Low Pressure, Up to 400 °F, Aircraft |
| SAE AS4897 | Hose Assembly, Polytetrafluoroethylene (PTFE), Low Pressure, 450 °F and Fireproof, Procurement Specification for |
| SAE MA614A | Hose Assembly, Polytetrafluoroethylene (PTFE), Metallic Reinforced, 28,000 kPa, 204 °C, Hydraulic, Metric |
| SAE AMS2437C | Coating, Plasma Spray Deposition |
| SAE AS4875A | Fittings, Straight Threaded Boss or Flanged, Fluid Connection |
| MS27629 Revision B:2009 | ADAPTER ASSEMBLY, FLARELESS, STRAIGHT, TUBE TO HOSE-WITH SWIVEL NUT |
| MS27395 Revision D:2014 | ELBOW, FLARELESS, TUBE TO HOSE - 45 DEGREES SWIVEL NUT |
| MS27084 Revision D:2014 | ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 45 DEGREES |
| SAE MA2007A | Hose Assembly, Tetrafluoroethylene, Lightweight, 204 °C, 21 000 kPa Hydraulic, Metric |
| SAE AS4388 | Hose Assembly PTFE Heavy Duty, -65 To 400 °F (-55 To 204 °C) 8000 psi (56 000 kPa) Hydraulic and Pneumatic |
| SAE AS269J | Identification of Material for AN, MS, and AS Engine and Propeller Standard Utility Parts and Also for Company Parts |
| SAE AS4604B | Hose Assembly, 3000 psi, Polytetrafluoroethylene, Metallic Reinforced, 400 °F, Heavy Duty, Aircraft Hydraulic Systems |
| SAE AS4843A | Fittings, Beaded, Fluid Connection |
| SAE AS4623E | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3,000 psi, 275 °F, Heavy Duty, Aircraft Hydraulic Systems |
| SAE MA2079 | Hose Assembly, Convoluted Polytetrafluoroethylene, High Temperature, Medium Pressure, Aircraft, Metric |
| SAE AS1424G | Hose Assemblies, Metal, Medium Pressure, High Temperature |
| ISO 8913:2006 | Aerospace — Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 degrees F/3 000 psi (204 degrees C/20 684 kPa) and 204 degrees C/21 000 kPa (400 degrees F/3 046 psi) — Procurement specification |
| SAE MA4623 | Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced Heavy-Duty, 21 000 kPa, 135 °C, Aircraft Hydraulic Systems, Metric |
| SAE AS1946E | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, Up to 1500 psi and 450 °F, Hydraulic and Pneumatic |
| SAE AS5169C | FITTING, PORT PLUG AND BLEEDER |
| SAE AS4897A | Hose Assembly, Polytetrafluoroethylene (PTFE), Low Pressure, 450 °F and Fireproof, Procurement Specification for |
| SAE AMS2241S | Tolerances, Corrosion and Heat-Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire |
| SAE AMS2248H | Chemical Check Analysis Limits, Corrosion- and Heat-Resistant Steels and Alloys, Maraging and Other Highly Alloyed Steels, and Iron Alloys |
| ASTM A 262 : 2015 : REDLINE | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
| SAE AMS 2806D : 2013 | IDENTIFICATION BARS, WIRE, MECHANICAL TUBING, AND EXTRUSIONS, CARBON AND ALLOY STEELS AND CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS |
| SAE AMS2371K | Quality Assurance Sampling and Testing Corrosion and Heat-Resistant Steels and Alloys Wrought Products and Forging Stock |
| ASTM E 353 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| SAE AMS2374E | Quality Assurance Sampling and Testing Corrosion and Heat-Resistant Steel and Alloy Forgings |
| SAE AMS2808E | Identification Forgings |
| SAE AMS7490Q | Rings, Flash Welded Corrosion and Heat-Resistant Austenitic Steels, Austenitic-Type Iron, Nickel, or Cobalt Alloys, or Precipitation-Hardenable Alloys |
| SAE AMS2243K | Tolerances Corrosion and Heat-Resistant Steel Tubing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.