SAE AMS3167B
Current
Current
The latest, up-to-date edition.
SOLVENTS, WIPE FOR CLEANING PRIOR TO APPLICATION OF PRIMER AND TOP COAT MATERIALS, OR SEALING COMPOUNDS
Published date
17-10-2005
Publisher
Sorry this product is not available in your region.
1 SCOPE
2 APPLICABLE DOCUMENTS
3 TECHNICAL REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PREPARATION FOR DELIVERY
6 ACKNOWLEDGMENT
7 REJECTIONS
8 NOTES
Covers liquid solvent cleaners.
| Committee |
AMS G9
|
| DevelopmentNote |
Supersedes SAE AMS 3166. (01/2014)
|
| DocumentType |
Revision
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
| SAE AMS 3116 A : 2005 | PRIMER COATING; EPOXY, CHEMICAL AND SOLVENT RESISTANT NON-CHROMATED, CORROSION PREVENTIVE |
| SAE AMS 3721 : 2017 | TAPE FOR ORGANIC COATINGS ADHESION TESTING |
| SAE AS5127B | AEROSPACE STANDARD TEST METHODS FOR AEROSPACE SEALANTS METHODS FOR PREPARING AEROSPACE SEALANT TEST SPECIMENS |
| SAE AMS I 83387 : 2016 | INSPECTION PROCESS, MAGNETIC RUBBER |
| SAE AS5127/1C | AEROSPACE STANDARD TEST METHODS FOR AEROSPACE SEALANTS TWO-COMPONENT SYNTHETIC RUBBER COMPOUNDS |
| SAE AMS3376C | SEALING COMPOUND, NON-CURING, FLUOROSILICONE GROOVE INJECTION TEMPERATURE AND FUEL RESISTANT |
| SAE AMS 3092 : 2015 | RELEASE AGENT, FOR USE DURING FORM-IN-PLACE GASKET PREPARATION |
| SAE AMSS83474B | SHIMS, MOLDED, FILLED RESIN COMPOUND AND SHEET PREPEG |
| ASTM D 1353 : 2013 : REDLINE | Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products |
| SAE AMS2473H | CHEMICAL FILM TREATMENT FOR ALUMINUM ALLOYS, GENERAL PURPOSE COATING |
| SAE AMSC27725D | COATING, CORROSION PREVENTATIVE, FOR AIRCRAFT INTEGRAL FUEL TANKS, FOR USE TO 250 DEGREES F (121 DEGREES C) |
| SAE AMSQQP416E | PLATING, CADMIUM (ELECTRODEPOSITED) |
| A-A-59281 Revision A:2007 | Cleaning Compound, Solvent Mixtures |
| SAE AMS3276F | SEALING COMPOUND, INTEGRAL FUEL TANKS AND GENERAL PURPOSE, INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C) |
| SAE AMS4911N | TITANIUM ALLOY, SHEET, STRIP, AND PLATE, 6AL - 4 V, ANNEALED |
| SAE AMS6419H | STEEL, BARS, FORGINGS, AND TUBING, 1.6SI - 0.82CR - 1.8NI - 0.40MO - 0.08V (0.40 - 0.45C), CONSUMABLE ELECTRODE VACUUM REMELTED |
| ASTM D 1613 : 2017 : REDLINE | Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products |
| SAE AMS3819C | CLOTHS, CLEANING, FOR AIRCRAFT PRIMARY AND SECONDARY STRUCTURAL SURFACES |
| MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
| MIL-PRF-85285 Revision E:2012 | COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT |
| SAE AMS4101E | ALUMINUM ALLOY, PLATE, 4.4CU - 1.5MG - 0.60MN (2124-T851), SOLUTION HEAT TREATED, STRETCHED, AND PRECIPITATION HEAT TREATED |
| MIL-STD-290 Revision H:2013 | PACKAGING AND MARKING OF PETROLEUM AND RELATED PRODUCTS |
| SAE AMS T 9046 : 2002 | TITANIUM AND TITANIUM ALLOY, SHEET, STRIP, AND PLATE |
| SAE AMSQQA250/4B | ALUMINUM ALLOY 2024, PLATE AND SHEET |
| SAE AMS QQ A 250/13 : 1997 | ALUMINUM ALLOY ALCLAD 7075, PLATE AND SHEET |
| SAE AMS4037Q | ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN (2024; -T3 FLAT SHEET, -T351 PLATE) SOLUTION HEAT TREATED |
| MIL-DTL-81381 Revision C:2005 | WIRE, ELECTRIC, POLYIMIDE-INSULATED, COPPER OR COPPER ALLOY |
| MIL-PRF-23377 Revision K:2012 | PRIMER COATINGS: EPOXY, HIGH-SOLIDS |
| SAE AMS4045L | ALUMINUM ALLOY SHEET AND PLATE 5.6ZN - 2.5MG - 1.6CU - 0.23CR 7075: (-T6 SHEET, -T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS3375C | ADHESIVE/SEALANT, FLUOROSILICONE AROMATIC FUEL RESISTANT, ONE-PART ROOM TEMPERATURE VULCANIZING |
| SAE AS5127/1C | AEROSPACE STANDARD TEST METHODS FOR AEROSPACE SEALANTS TWO-COMPONENT SYNTHETIC RUBBER COMPOUNDS |
| CFR 40(PT63.63.1440-END) : JUL 2004 | PROTECTION OF ENVIRONMENT |
| SAE AMS4202D | ALUMINUM ALLOY, PLATE - 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND PRECIPITATION HEAT TREATED |
| MIL-PRF-22750 Revision G:2011 | COATING, EPOXY, HIGH-SOLIDS |
| SAE AMS3100D | ADHESION PROMOTER FOR POLYSULFIDE SEALING COMPOUNDS |
| A-A-58054 Base Document:1996 | ABRASIVE MATS, NON-WOVEN, NON-METALLIC |
| CCC-C-419 Revision G:1989 | CLOTH, DUCK, UNBLEACHED, PLIED-YARNS, ARMY AND NUMBERED |
| ASTM D 4420 : 1994 | Standard Test Method for Determination of Aromatics in Finished Gasoline by Gas Chromatography) |
| SAE AMS5046D | CARBON STEEL, SHEET, STRIP, AND PLATE, (SAE 1020 AND 1025) |
| SAE AMS2629E | FLUID, JET REFERENCE |
| MIL-PRF-83282 Revision D:1997 | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
| SAE AMS2825B | MATERIAL SAFETY DATA SHEETS |
| MIL-PRF-85582 Revision E:2012 | PRIMER COATINGS: EPOXY, WATERBORNE |
| ASTM D 1475 : 2013 : REDLINE | Standard Test Method For Density of Liquid Coatings, Inks, and Related Products |
| SAE AS5127B | AEROSPACE STANDARD TEST METHODS FOR AEROSPACE SEALANTS METHODS FOR PREPARING AEROSPACE SEALANT TEST SPECIMENS |
| FED-STD-595 Revision C:2008 | COLORS USED IN GOVERNMENT PROCUREMENT |
| ASTM D 329 : 2007 | Standard Specification for Acetone |
| SAE AMS2470N | ANODIC TREATMENT OF ALUMINUM ALLOYS, CHROMIC ACID PROCESS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.