SAE AMSQQS763D
Current
Current
The latest, up-to-date edition.
Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
02-03-2015
Publisher
€131.00
Excluding VAT
1. SCOPE AND CLASSIFICATION
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PACKAGING
6. NOTES
This specification covers corrosion-resistant steel bars, wire, shapes, and forgings.
This specification covers corrosion-resistant steel bars, wire, shapes, and forgings.
| Standards | Relationship |
| QQ-S-763 Revision F:1996 | Similar to |
| SAE AS4468G | Hose Assembly, 125 psi, Lined Silicone, Potable Water, Procurement Specification |
| MIL-DTL-24704 Revision B:2011 | Flanges, Four-Bolt, Square, for Hydraulic Systems, General Specification for |
| MIL-DTL-3922-75 Revision D:2013 | Flanges, Waveguide, Reduced Height |
| AN915 Revision 14:2015 | Elbow, Pipe, 45 Degree |
| MIL-DTL-23971 Revision E:2017 | Power Dividers, Power Combiners, and Power Divider/Combiners, General Specification for |
| 17/30369678 DC : 0 | PREN 7010 - AEROSPACE SERIES - USER GUIDE FOR CREATION AND DESIGNATION OF BOLTS |
| MS27086 Revision D:2013 | Elbow, Nipple End, Flared, Tube to Hose - 90 Degrees Swivel Nut |
| MS27087 Revision D:2013 | Elbow, Nipple End, Flared, Tube to Hose - 45 Degrees Swivel Nut |
| MIL-DTL-15743-9 Revision C:2007 | Switches, Rotary, Enclosed, Submersible (15 Feet), Snap Action, 500 Volts Alternating Current/250 Volts Direct Current, 30 Ampere, Symbols 839.1 (4PDT), 848.1 (TPDT), and 2752.1 (Special) |
| MIL-DTL-3655 Revision D:2004 | Connector, Plug and Receptacle, Electrical (Coaxial, Series Twin), and Associated Fittings, General Specification for |
| BS ISO 7169:2014 | Aerospace. Separable tube fittings for fluid systems, for 24° cones, for pressures up to 3 000 psi or 21 000 kPa. Procurement specification, inch/metric |
| AN849 Revision 13:2015 | Nipple, Hose |
| AN838 Revision 9:2011 | Elbow, Tube to Hose, 90 Degrees |
| SAE AS18280H | Fittings, 24 Degree Cone Flareless, Fluid Connection, 3000 psi |
| MS27077 Revision D:2014 | Flange, Swivel, Retaining |
| AN815 Revision 10:2015 | Union - Flared Tube |
| MS27076 Revision E:2013 | Nipple, Straight, Swivel Flange |
| AN846 Revision 9:2013 | Elbow, Hose, 45 Degree |
| MIL-DTL-16356 Revision E:2013 | Gauges, Direct Reading, Oblong Glass |
| MIL-PRF-23145 Revision C:2018 | Inflation Assemblies, Life Preserver |
| MIL-DTL-3922-67 Revision E:2013 | Flanges, Waveguide (Contact) (Round, 4 Hole) (Millimeter) |
| PREN 3778 : 200P1 | AEROSPACE SERIES - PINS, QUICK RELEASE, TWO BALLS, DOUBLE ACTING, SINGLE LOCKING, "L" TYPE HANDLE, IN CORROSION RESISTING STEEL |
| PREN 6068 : 200P2 | AEROSPACE SERIES - PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE ACTING, BUTTON HANDLE |
| SAE AS4623E | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3,000 psi, 275 °F, Heavy Duty, Aircraft Hydraulic Systems |
| SAE AS50151C | Connectors, Electrical, Circular Threaded, AN Type, General Specification For |
| ASTM F 2332 : 2006 | Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components |
| SAE AS95234A | Connectors, Electrical, Reverse Bayonet, General Specification for |
| MIL-DTL-45952 Revision A:2014 | Pin, Quick-Release, Detent General Specification for |
| MIL-DTL-87104 Revision C:2014 | COAXIAL ASSEMBLIES, GENERAL SPECIFICATION FOR |
| MIL-DTL-24694 Revision A:2011 | Valve, Hydraulic Relief, 1.5 - 35 Bars (22 - 500 Pounds Per Square Inch) Cartridge Type, General Specification for |
| MIL-DTL-25579 Revision H:2014 | Hose Assembly, Polytetrafluoroethylene, High Temperature, Medium Pressure, General Specification for |
| MIL-STD-2003-4 Revision A:2009 | Electric Plant Installation Standard Methods for Surface Ships and Submarines (Cableways) |
| A-A-59590 Revision D:2014 | Holder, Electrical Card, Wedge Retainers, 3 Piece, for Cold Plate Applications, General Requirements for |
| MIL-DTL-11996 Revision C:2015 | Handsets, General Specification for |
| MIL-DTL-55041 Revision F:2012 | Switches, Waveguide, General Specification for |
| A-A-59789 Revision B:2014 | Holder, Electrical Card, Wedge Retainers, 5 Piece, for Cold Plate Applications, General Requirements for |
| MS27082 Revision E:2014 | Elbow, Nipple End, Swivel Flange to Hose-90 Degrees |
| AN841 Revision 7:2013 | Adapter - Hose to Flared Tube |
| MIL-C-83522-1 Revision F:2006 | CONNECTOR, PLUG, FIBER OPTIC, SINGLE TERMINUS, THREADED, (STEP-DOWN NOSE INTERFACE), LENSLESS, EPOXY, FOR 50/125 MICROMETER, 62.5/125 MICROMETER, AND 100/140 MICROMETER |
| BS IEC 63004:2015 | Standard for receiver fixture interface |
| MIL-DTL-24749 Revision B:2014 | Grounding Straps andStuds, Electrical Bonding |
| MIL-C-83522-7 Revision C:2006 | CONNECTOR, RECEPTACLE, FIBER OPTIC, SINGLE TERMINUS, THREADED, PARALLEL PC MOUNT |
| A-A-59950 Base Document:2014 | Holder, Electrical Card, Wedge Retainers, 7 Body, for Cold Plate Applications, General Requirements for |
| MIL-DTL-24695 Revision C:2012 | Valve, Hose Assembly, and Adapter, Vent and Test Hydraulic Service, General Specification for |
| MIL-DTL-28837 Revision D:2015 | Mixer Stages, Radio Frequency General Specification for |
| AN844 Revision 13:2013 | Elbow - Pipe to Hose, 45 Degree |
| MIL-DTL-83522-16 Revision C:2013 | Connector, Fiber Optic, Single Terminus, Plug, Bayonet Coupling (ST Style), 2.5 Millimeters Diameter Ferrule, Epoxy |
| AN807 Revision 7:2007 | Adapter, Straight, Tube to Hose |
| MIL-DTL-28754 Revision E:2016 | Connectors, Electrical, Modular, and Component Parts General Specification for |
| PREN 3776 : 200P1 | AEROSPACE SERIES - PINS, QUICK RELEASE, TWO BALLS, SINGLE ACTING, SINGLE LOCKING, "L" TYPE HANDLE, IN CORROSION RESISTING STEEL |
| SAE AS620G | Hose Assemblies, Convoluted Polytetrafluoroethylene Metallic Reinforced, High Temperature, Medium Pressure, Aircraft |
| SAE ARP81490A | Transmission Lines, Transverse Electromagnetic Mode |
| SAE AS1975G | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275 °F, Standard Duty, Hydraulic, Aircraft Systems |
| IEC 63004:2015 | Standard for receiver fixture interface |
| MIL-DTL-5015 Revision H:2000 | Connectors, Electrical, Circular Threaded, AN Type, General Specification for (S/S by SAE-AS50151) |
| DSCC 84103 : J | HOLDER, ELECTRICAL CARD, WEDGE RETAINER, 3-PIECE, SCREW ACTUATED |
| MIL-STD-186 Revision F:2002 | Manufacturing Process Protective Finishingfor Army Missile Weapon Systems |
| MIL-DTL-26482 Revision H:2007 | Connectors, Electrical, Circular, Miniature, Quick Disconnect, Environment Resisting, Receptacles and Plugs, General Specification for |
| MS27075 Revision D:2013 | Nipple, Flared, Tube to Hose - Swivel Nut |
| MS27071 Revision D:2013 | Union, Nipple |
| MIL-DTL-15370 Revision K:2015 | Couplers, Directional General Specification for |
| MIL-DTL-3928 Revision H:2016 | Switches, Radio-Frequency Transmission Line, (Coaxial and Microstrip), General Specification for |
| SAE AMSP5510A | O-Ring, Preformed, Straight Thread Tube Fitting Boss, Type I Hydraulic (-65 to 160 °F) |
| AN842 Revision 13:2013 | Elbow - Pipe to Hose, 90 Degrees |
| MIL-DTL-55116 Revision D:2013 | Connectors: Miniature Audio, Five-Pin and Six-Pin General Specification for |
| MIL-DTL-12520 Revision D:2005 | Connectors, Plug and Receptacle (Electrical, Waterproof), and Accessories; General Specification for |
| MIL-DTL-2 Revision G:2006 | Valves, Cylinder, Gas (for Compressed or Liquefied Gases), General Specification for (S/S by A-A-59860) |
| AN914 Revision 11:2012 | Elbow, Pipe, Internal and External Thread, 90 Degrees (For New Design, Use SAE-AS4854) |
| PREN 6067 : 200P2 | AEROSPACE SERIES - PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, DOUBLE ACTING, BUTTON HANDLE |
| SAE AS604E | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 °F, Heavyweight, Hydraulic |
| SAE AS22227C | Bearing, Ball, Annular, Generator and Motor Generator |
| SAE J24714_200110 | Fluid Systems—Connector Tubes—General Specification and Part Standard |
| DSCC 85116 : D | CONTACT ASSEMBLY, ELECTRICAL |
| SAE AS614D | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 4000 psi, 400 °F, Heavy Duty, Hydraulic and Pneumatic |
| SAE AS5420G | Hose Assembly, Heated, 125 psig, Lined Silicone, Potable Water, Procurement Specification |
| NASA SSTD 8070 0122 : 2014 | PROCEDURE FOR GTAW OF 625 ALLOY TO 300 SERIES STAINLESS STEEL |
| MIL-C-83522-4 Revision F:2006 | CONNECTOR, RECEPTACLE, FIBER OPTIC, SINGLE TERMINUS, THREADED, RECEPTACLE, LOW PROFILE PARALLEL PC MOUNT |
| MIL-DTL-38394 Revision E:2009 | Transmitter, Pressure TRU-81/A, Oil, 0-500 PSI |
| MIL-DTL-55074 Revision G:2013 | Connectors, Plug and Receptacle, Telephone, Electrical, Subassembly and Accessories and Contact Assembly, Electrical, General Specification for |
| MIL-DTL-26500 Revision G:2011 | Connectors, General Purpose, Electrical, Miniature, Circular, Environment Resisting or Hermetically Sealed, General Specification for |
| MIL-DTL-83517 Revision B:2015 | Connector, Coaxial, Radio Frequency for Coaxial, Strip or Microstrip Transmission Line General Specification for |
| MIL-DTL-83522 Revision E:2013 | Connectors, Fiber Optic, Single Ferrule, General Specification for |
| AN848 Revision 13:2015 | Elbow, Hose, 90 Degree |
| AN 840 : 0011 | ADAPTER, STRAIGHT, PIPE TO HOSE |
| AN 839 : 0009 | ELBOW, TUBE TO HOSE, 45 DEGREES |
| MIL-C-83522-3 Revision G:2006 | CONNECTOR, ADAPTER, FIBER OPTIC, BULKHEAD MOUNT, FOR SINGLE FIBER |
| MIL-C-83522-5 Revision E:2006 | CONNECTOR, RECEPTACLE, FIBER OPTIC, BULKHEAD MOUNT, FOR SINGLE FIBER |
| MS27394 Revision C:2014 | Elbow, Flareless, Tube to Hose - 90 Degrees Swivel Nut |
| SAE AS1424G | Hose Assemblies, Metal, Medium Pressure, High Temperature |
| SAE AS1339H | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 °F, Lightweight, Hydraulic and Pneumatic |
| ASTM F 2332 : 2006 : R2013 | Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components |
| ISO 7169:2014 | Aerospace — Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa — Procurement specification, inch/metric |
| MIL-DTL-24630 Revision A:2014 | Valves, Check, In-line, for Hydraulic Fluid and Lubricating Oil Fluid, General Specification for |
| MIL-DTL-23928 Revision G:2014 | Panels, Electrical, Power Distribution and Manual Transfer, Circuit Breaker Type |
| SAE AIR5693 | Compatibility of PTFE Hose Assemblies With Typical Fluids Found in Aerospace Applications |
| MIL-DTL-24215 Revision E:2015 | Attenuators, Variable (Coaxial), General Specification for |
| MIL-DTL-24578 Revision C:2015 | Valves, Globe, Pressure Instrument, Stem Test Connection, Union End |
| MIL-PRF-26626 Revision F:2008 | Hose Assembly, Reinforced, Cryogenic, Oxygen |
| MIL-DTL-28875 Revision C:2012 | Amplifiers, Radio-Frequency and Microwave, Solid-State, General Specification for |
| MIL-DTL-43695 Revision C:2000 | Frame Sections, Tent, Frame Type, Expandable |
| MS27084 Revision D:2014 | Elbow, Nipple End, Swivel Flange to Hose - 45 Degrees |
| MIL-C-83522-8 Revision C:2006 | CONNECTOR, RECEPTACLE, FIBER OPTIC, SINGLE TERMINUS, THREADED, BULKHEAD, HEX NUT MOUNT |
| MIL-C-83522-2 Revision G:2006 | CONNECTOR, PLUG, FIBER OPTIC, SINGLE TERMINUS, THREADED, (STRAIGHT NOSE INTERFACE), LENSLESS, EPOXY, FOR 50/125 MICROMETER, 62.5/125 MICROMETER, AND 100/140 MICROMETER |
| SAE AS85049D | Connector Accessories, Electrical General Specification For |
| SAE AS95234 | Connectors, Electrical, Reverse Bayonet, General Specification For |
| DSCC 89064 : G | HOLDER, ELECTRICAL CARD, WEDGE RETAINER, 5-PIECE, .225 INCH BY .225 INCH AND .225 INCH BY .260 INCH BODY SIZE |
| SAE AS5169C | FITTING, PORT PLUG AND BLEEDER |
| DSCC 85033 : H | HOLDER, ELECTRICAL CARD, METAL CARD GUIDE, ZERO INSERTION FORCE |
| ASTM A 262 : 2015 : REDLINE | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
| MIL-H-6875 Revision H:1989 | Heat Treatment of Steel, Process for (S/S by SAE-AMS-H-6875) |
| FED-STD-123 Revision H:2007 | Marking for Shipment (Civil Agencies) |
| MIL-STD-163 Revision C:1978 | Steel Mill Products Preparation for Shipment and Storage (S/S by ASTM-A700) |
| FED-STD-183 Revision C:1980 | CONTINUOUS IDENTIFICATION MARKING OF IRON AND STEEL PRODUCTS (SEE NOTICE 3 FOR REPLACEMENT INFORMATION) |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.