|
SAE AS 95234 : 2014
|
CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR |
|
MIL-DTL-32371-8 Base Document:2012
|
Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 90 Degree Elbow, Bulkhead |
|
MIL-PRF-7907 Revision C:2007
|
Cleaning Compound, Decontaminating (for Soiled and Radioactive Contaminated Surfaces) |
|
MIL-DTL-32460-3 Base Document:2013
|
FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE |
|
MIL-DTL-83413-5 Revision C:2013
|
CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING: RECEPTACLES, ONE PIECE |
|
MIL-DTL-32480-1 Base Document:2014
|
Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Male |
|
MIL-DTL-32372-4 Revision A:2017
|
Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Bulkhead |
|
MS51819 Revision E:1987
|
ADAPTER, STRAIGHT, PIPE TO TUBE MALE PIPE END, FLARELESS TYPE, HYDRAULIC |
|
MS51510 Revision D:2017
|
TEE, TUBE, 37 DEGREE FLARED |
|
MS51525 Revision B:1988
|
FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; ADAPTER, STRAIGHT, TUBE TO BOSS, O-RING, 37 DEGREE FLARED |
|
MS28780 Revision F:2007
|
Fitting End, 45 Degrees Elbow, Attachable, Hydraulic, High Pressure Hose 3000 PSI, Flared Tube |
|
MIL-DTL-52404 Revision C:2010
|
CONNECTIONS: HOSE, FIRE AND WATER |
|
MS39210 Revision K:2018
|
NUTS, TUBE COUPLING - SAFETY SLEEVE COMPRESSION TYPE |
|
MIL-DTL-52471-10 Revision B:2008
|
HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100R12 FOUR-SPIRAL-WRAP REINFORCEMENT HOSE |
|
MIL-DTL-52525-35 Revision B:2008
|
FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 45 DEGREES BENT TUBE |
|
MIL-DTL-32480-5 Base Document:2014
|
Fitting, Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead |
|
MS51814 Revision E:1987
|
NIPPLE, TUBE, BULKHEAD, REGULAR HEX, FLARELESS TYPE, HYDRAULIC |
|
MIL-DTL-32371-10 Base Document:2012
|
Fittings, Hydraulic Tube, Sleeve, Double Angle |
|
MIL-DTL-32371-4 Base Document:2012
|
Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Tee, Spherical on Branch |
|
AA-C-2786 Base Document:2004
|
CABINET, SECURITY, INFORMATION PROCESSING SYSTEM STORAGE, CLASS 5 |
|
MIL-DTL-52525-10 Revision D:2011
|
FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, STRAIGHT |
|
16/30354034 DC : 0
|
BS EN 4854-1 - AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS, NARROW SERIES - DIMENSIONS AND LOADS |
|
MIL-DTL-32372-12 Revision A:2017
|
Fitting, Adapter, Tee, Hydraulic and Pneumatic, NPTF Male on Branch to ORFS Male Run to Run |
|
MIL-DTL-12520-9 Revision B:2005
|
Connectors, Receptacle, Electrical Waterproof (Shell Size 20, Female Inserts) |
|
MS51519 Revision C:2017
|
NIPPLE, TUBE, LARGE HEX, FOR USE WITH O-RING, 37 DEGREE FLARED |
|
MIL-DTL-83796-10 Revision A:2014
|
HOSE ASSEMBLY, RUBBER, LIGHT WEIGHT, INTERNAL SUPPORT COIL, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE |
|
MIL-DTL-52525-7 Revision D:2011
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, SHORT DROP |
|
AN915 Revision 14:2015
|
ELBOW, PIPE, 45 DEGREES |
|
MIL-DTL-32464-6 Base Document:2013
|
MALE ADAPTER, UNION CROSS, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 37 DEGREES SPHERICAL ON BRANCH, 1500-3000 PSI |
|
MS39206 Revision G:2012
|
ADAPTERS, STRAIGHT, PIPE TO TUBE - SAFETY SLEEVE COMPRESSION TYPE, MALE PIPE END |
|
A-A-59440-1 Revision B:2012
|
COCK-VALVE, CENTER DRAIN, INTERNAL SEAT OR EXTERNAL SEAT, 150 PSI, BRASS, NON-FLAMMABLE LIQUID OR GAS, NPTF-1 THREADS |
|
A-A-59440-2 Revision B:2012
|
COCK-VALVE, DRAIN, WITH HOSE BIB, 150 PSI, NON-FLAMMABLE LIQUID OR GAS, NPTF-1 THREADS |
|
MIL-DTL-32480 Base Document:2014
|
Adapter, Hydraulic and Pneumatic, Flareless Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and Minus 65 Degrees Fahrenheit to Plus 250 Degrees Fahrenheit, General Specification for |
|
MIL-DTL-4510 Revision F:2009
|
SPOTLIGHTS, INCANDESCENT, ROOF-MOUNTED, AUTOMOTIVE |
|
MIL-DTL-32464-1 Base Document:2013
|
MALE ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI |
|
MIL-DTL-32464-12 Base Document:2013
|
MALE ADAPTER, TEE, 37 DEGREES SPHERICAL TO ANPT, ANPT ON BRANCH, 1500-3000 PSI |
|
MIL-DTL-83796-11 Revision A:2014
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE, WITH LOCKWIRE HOLE |
|
MIL-DTL-53072 Revision F:2017
|
CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM - APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION |
|
MS35758 Revision D:2012
|
CUPS, GREASE, MANUAL FEED |
|
SAE AS 8952 : 2005
|
BEARINGS, ROLLER, ROD END, ANTIFRICTION SELF-ALIGNING |
|
MIL-DTL-12520-8 Revision B:2005
|
Connector, Receptacle, Electrical, Waterproof (Shell Size 20, Male Inserts) |
|
MS28781 Revision E:2007
|
Fitting End, 90 Degrees Elbow, Attachable, Hydraulic, High Pressure Hose 3000 PSI, Flared Tube |
|
MIL-DTL-5002 Revision E:2011
|
SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
|
SAE AS 1241 : 2016
|
FIRE RESISTANT PHOSPHATE ESTER HYDRAULIC FLUID FOR AIRCRAFT |
|
MS39199 Revision G:2012
|
NIPPLE, TUBE-SAFETY SLEEVE COMPRESSION TYPE, BULKHEAD MOUNTING |
|
MS51825 Revision H:2008
|
SLEEVES, CLINCHES, TUBE FITTING, FLARELESS TYPE, HYDRAULIC |
|
MIL-DTL-52525-32 Revision A:2008
|
FITTINGS, HOSE, REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES: FIELD ATTACHABLE (REUSABLE), SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE, FOR USE WITH TYPE 100RE FOUR-SPIRAL-WRAP REINFORCEMENT HOSE |
|
MS51811 Revision E:1987
|
TEE, TUBE, FLARELESS TYPE HYDRAULIC |
|
MS51534 Revision A:1979
|
REDUCER, TUBE, 37 DEGREE FLARED |
|
MIL-DTL-52525-44 Base Document:2008
|
FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREES BENT TUBE |
|
MIL-DTL-32480-6 Base Document:2014
|
Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS Bulkhead |
|
MIL-DTL-32372-8 Revision A:2017
|
Fitting, Adapter, 45 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel |
|
MIL-DTL-32372-9 Revision A:2017
|
Fitting, Adapter, 90 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel |
|
AN849 Revision 13:2015
|
NIPPLE, HOSE |
|
AN838 Revision 9:2011
|
Elbow, Tube to Hose, 90 Degrees |
|
MIL-DTL-52525-11 Revision C:2008
|
FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 45 DEGREES BENT TUBE |
|
MS51501 Revision C:2016
|
NIPPLE TUBE, REGULAR HEX, 37 DEGREE FLARED, SHORT |
|
MIL-DTL-52525-1 Revision D:2011
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT, SAE-J516 TYPE, FOR ASSEMBLY WITH SAE-J517, TYPE 100R2 HOSE |
|
MS51521 Revision C:2017
|
ELBOW, TUBE, 90 DEGREE, SWIVEL, 37 DEGREE FLARED |
|
MS51528 Revision B:1988
|
FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; ELBOW, TUBE TO BOSS, 45 DEGREE, O-RING, 37 DEGREE FLARED |
|
MS51816 Revision E:1987
|
ADAPTER, STRAIGHT, PIPE TO TUBE, FEMALE PIPE END, FLARELESS TYPE, HYDRAULIC |
|
MIL-DTL-52525-43 Base Document:2008
|
FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, STRAIGHT |
|
MIL-DTL-32372-7 Revision A:2017
|
Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel |
|
MIL-DTL-32371-3 Base Document:2012
|
Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 90 Degrees Elbow |
|
MIL-DTL-32372-6 Revision A:2017
|
Fitting, Adapter, 90 Degree Male, Hydraulic and Pneumatic, NPTF to ORFS Bulkhead |
|
MIL-DTL-32371-6 Base Document:2012
|
Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Nipple Tube, Regular Hex, Long |
|
A-A-59440-7 Revision B:2012
|
Valve, Shut-Off, Screw Stem, Threaded Type, 150 PSI, Brass, Water, Oil, and Gas (WOG), NPTF-1 Threads |
|
MIL-DTL-32372 Revision A:2016
|
Fitting, Adapter, Hydraulic and Pneumatic, NPTF to ORFS Connectors, 1500 to 3000 PSI and -65°F to 250°F |
|
AN815 Revision 10:2015
|
UNION - FLARED TUBE |
|
MS51509 Revision D:2017
|
ELBOW, TUBE, 45 DEGREE, BULKHEAD, 37 DEGREE FLARED |
|
MS51524 Revision C:2017
|
TEE, TUBE TO SWIVEL, SWIVEL ON BRANCH, 37 DEGREE FLARED |
|
MS51502 Revision C:2016
|
NIPPLE TUBE, REGULAR HEX, 37 DEGREE FLARED, LONG |
|
MS39212 Revision K:2018
|
SLEEVES, COMPRESSION, TUBE - HOSE FITTING - SAFETY SLEEVE TYPE |
|
MS51514 Revision D:2017
|
TEE, PIPE TO TUBE, FEMALE PIPE ON RUN 37 DEGREE FLARED |
|
MS51503 Revision C:2016
|
ADAPTER, STRAIGHT, PIPE TO TUBE, FEMALE PIPE END, 37 DEGREE FLARED |
|
SAE ARP 5794 : 2014
|
CENTRIFUGAL AIRCRAFT FUEL PUMP REQUIREMENTS, DESIGN AND TESTING, AEROSPACE STANDARD |
|
MIL-DTL-8878 Revision L:2014
|
TURNBUCKLES, POSITIVE SAFETYING, GENERAL SPECIFICATION FOR |
|
MIL-DTL-62011-2 Base Document:2009
|
Pump, Fuel, Electrically-Operated: 24-Volt DC, In-Tank Type, Side-Mounted Connector, Type II |
|
MS51529 Revision B:1988
|
FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; TEE, TUBE TO BOSS, BOSS ON BRANCH, O-RING |
|
MIL-DTL-28748-15 Base Document:2004
|
CONNECTORS, ELECTRICAL, HEXAGONAL, RACK AND PANEL, MINIATURE, PLUG-RECEPTACLE, FEMALE SOLDER CUP OR PRINTED WIRING BOARD SOCKET CONTACTS, SIZE 20 |
|
AN6204 Revision L:2013
|
Valve, Hydraulic Bleeder |
|
AN846 Revision 9:2013
|
ELBOW, HOSE, 45 DEGREES |
|
MS51532 Revision B:1988
|
FITTING, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; CAP, TUBE, 37 DEGREE FLARED |
|
MIL-DTL-32372-2 Revision A:2017
|
Fitting, Adapter, 45 DegreesElbow, Hydraulic and Pneumatic, NPTF Male to ORFS Male |
|
MIL-DTL-32480-7 Base Document:2014
|
Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel |
|
MS51520 Revision C:2017
|
NIPPLE, TUBE, BULKHEAD, 37 DEGREE FLARED |
|
MIL-STD-1500 Revision C:2007
|
Cadmium-Titanium Plating, Low Embrittlement, Electrodeposition |
|
FF-S-200 Revision B:2004
|
SETSCREWS: HEXAGON SOCKET AND SPLINE SOCKET, HEADLESS |
|
MIL-PRF-23145 Revision C:2018
|
Inflation Assemblies, Life Preserver |
|
MIL-DTL-83796-4 Revision C:2014
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS WITH LOCKWIRE HOLE |
|
MIL-DTL-22992 Revision H:2015
|
Connectors, Plugsand Receptacles, Electrical, Waterproof, Quick Disconnect, Heavy Duty Type, General Specification for |
|
MIL-DTL-45912 Revision B:2013
|
BOLT, SELF-LOCKING, HEXAGON HEAD, STEEL |
|
MIL-DTL-52471-1 Revision C:2008
|
HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100R1, SINGLE-WIRE BRAIDED REINFORCEMENT HOSE |
|
MIL-DTL-52525-6 Revision C:2008
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE |
|
SAE AS 4775 : 2017
|
AIRCRAFT MAINTENANCE JACKS - GENERAL REQUIREMENTS |
|
MIL-DTL-83798-4 Revision D:2017
|
Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, Straight |
|
MS51507 Revision D:2017
|
ELBOW, TUBE, 90 DEGREE, 37 DEGREE BULKHEAD, FLARED |
|
MS51508 Revision D:2017
|
ELBOW, PIPE TO TUBE, 45 DEGREE, MALE PIPE END, 37 DEGREE FLARED |
|
MS51516 Revision C:2017
|
TEE, BULKHEAD ON RUN 37 DEGREE FLARED |
|
MIL-DTL-52525-36 Revision B:2008
|
FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREES BENT TUBE |
|
MIL-DTL-32371-9 Base Document:2012
|
Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Tee, Bulkhead, Spherical on Run |
|
MIL-DTL-52525-15 Revision C:2008
|
FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 90 DEGREES BENT TUBE |
|
MIL-DTL-3903 Revision F:2013
|
WIRE ROPE ASSEMBLIES, SINGLE LEG, (SLING TYPE) |
|
NASM 35206 : 2004
|
SCREW, MACHINE, PAN HEAD, CRUCIFORM RECESS, CARBON STEEL, UNC-2A |
|
DSCC 84168 : F
|
HOLDER, ELECTRICAL CARD, CARD GUIDE-RETAINER, LEVER ACTUATED, METAL |
|
SAE AS 12500 : 2018
|
CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES |
|
SAE AS 50151 : 2015
|
CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE, GENERAL SPECIFICATION FOR |
|
SAE AS 95234A : 2020
|
CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR |
|
15/30333168 DC : 0
|
BS EN 6118 - AEROSPACE SERIES - PROCESS SPECIFICATION - ALUMINIUM BASE PROTECTION FOR FASTENERS |
|
MIL-DTL-83513 Revision G:2008
|
Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for |
|
MIL-DTL-3607 Revision C:2009
|
Connectors, Coaxial, Radiofrequency, Series for Pulse, General Specification for |
|
SAE AS5929C:2022
|
BEARING, ROLLER, NEEDLE, TRACK-ROLLER, CROWN RADIUSED OD, INTEGRAL STUD, TYPE VII, ANTI-FRICTION, CORROSION RESISTANT NITROGEN (CREN) STEEL AND CORROSION RESISTANT (CRES) STEEL, INCH |
|
MS3186 Revision G:2011
|
CONNECTOR, MOUNTING TO CONNECTORS, MOUNTING NUTS, PLAIN HEXAGON |
|
MIL-DTL-14072 Revision F:2013
|
FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
|
MIL-DTL-45952 Revision A:2014
|
PIN, QUICK-RELEASE, DETENT GENERAL SPECIFICATION FOR |
|
MIL-DTL-13791-22 Revision A:2016
|
MACHINE-PAN HEAD SCREW, CROSS-RECESSED, CARBON STEEL, PROPER PROTECTED COATING PLATED, UNC-2A |
|
MIL-STD-1678-1 Revision D:2016
|
FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE REQUIREMENTS (PART 1 OF 6 PARTS) |
|
MIL-DTL-32139 Revision B:2017
|
Connectors, Electrical, Rectangular, Nanominiature, Polarized Shell, General Specification for |
|
MIL B 18 : F
|
BATTERIES, NON-RECHARGEABLE, DRY |
|
MIL-DTL-28748 Revision D:2001
|
CONNECTOR, PLUG AND RECEPTACLE, RECTANGULAR, RACK AND PANEL SOLDER TYPE AND CRIMP TYPE CONTACTS - GENERAL SPECIFICATION FOR |
|
MIL-STD-1353 Revision C:2014
|
ELECTRICAL CONNECTORS, PLUG-IN SOCKETS AND ASSOCIATED HARDWARE, SELECTION AND USE OF |
|
MIL-DTL-45913 Revision D:2011
|
NUTS, SELF-LOCKING, HEXAGON, PREVAILING TORQUE |
|
FF-S-85 Revision D:2005
|
Screw, Cap, Slotted and Hexagon Head |
|
MIL-DTL-32360 Base Document:2010
|
STOP LIGHT - TAILLIGHT, VEHICULAR-24 VOLT, SERVICE STOP, SERVICE TAIL, BLACKOUT TAIL |
|
MIL-DTL-5099 Revision C:2011
|
INDICATOR, CABIN AIR PRESSURE, 1-7/8 INCH DIAL, TYPE MA-1 |
|
AA-D-600 Revision D:2000
|
DOOR, VAULT, SECURITY |
|
MIL-DTL-12133 Revision E:2015
|
WASHER, SPRING TENSION, GENERAL SPECIFICATION FOR |
|
MIL STD 11991 : A
|
GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
|
MIL-DTL-32460-8 Base Document:2013
|
FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL |
|
MIL-DTL-83454 Revision B:2016
|
TERMINALS, STUD, BLIND PLATE, FOR ELECTRICAL BONDING AND GROUNDING (NONINSULATED) |
|
SAE AS 4841 : 2017
|
FITTINGS, 37 DEGREES INTERNAL FLARE, FLUID CONNECTION, PROCUREMENT SPECIFICATION |
|
MIL-DTL-24308-26 Revision M:2015
|
Connectors, Electric, Rectangular, Miniature, Polarized Shell, Rack and Panel, Screw-Lock Assembly, Female |
|
MS24700 Revision B:2005
|
Bushing, Fixed, Connector, Rack and Panel, Miniature |
|
MS35759 Revision C:2008
|
CUPS, GREASE, AUTOMATIC FEED |
|
AN841 Revision 7:2013
|
ADAPTER - HOSE TO FLARED TUBE |
|
SAE AS 5590 : 2013
|
CONNECTORS, FIBER OPTIC, ADVANCED, CIRCULAR OR RECTANGULAR, PLUG AND RECEPTACLE, ENVIRONMENT RESISTANT, REMOVABLE TERMINI/CONTACTS, GENERAL SPECIFICATION FOR |
|
MIL-DTL-32464-7 Base Document:2013
|
MALE ADAPTER, 45 DEGREES ELBOW, BULKHEAD, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI |
|
MS39207 Revision H:2018
|
Elbows, Tube - Safety Sleeve Compression Type, 90 Degree |
|
10/30227763 DC : 0
|
BS EN 6114 - AEROSPACE SERIES - BOLT, COUNTERSUNK HEAD, SHORT THREAD - INCH SERIES |
|
MS53075 Revision C:2011
|
CAP, FUEL TANK TACTICAL VEHICLE, NON-VENTED |
|
MIL-DTL-32464-2 Base Document:2013
|
MALE ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI |
|
MIL-DTL-45916 Revision C:2014
|
INSERT, SCREW THREAD - THREAD CUTTING AND THREAD FORMING |
|
SAE AS 81934 : 2016
|
BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING |
|
MIL-DTL-25427 Revision B:2009
|
COUPLING ASSEMBLY, HYDRAULIC, SELF SEALING, QUICK DISCONNECT, GENERAL SPECIFICATION FOR |
|
MIL-DTL-32464-4 Base Document:2013
|
MALE ADAPTER, TEE, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 37 DEGREES SPHERICAL ON BRANCH, 1500-3000 PSI |
|
MS25221 Revision G:2005
|
Guard, Switch, 2 or 3 Position |
|
MIL-DTL-21097 Revision H:2017
|
Connectors, Electrical, Printed Wiring Board, General Purpose General Specification for |
|
MIL-DTL-28731 Revision F:2007
|
CONNECTORS, ELECTRICAL, RECTANGULAR, REMOVABLE CONTACT, FORMED BLADE, FORK TYPE (FOR RACK AND PANEL AND OTHER APPLICATIONS) |
|
MIL-DTL-25955 Revision A:2004
|
CONNECTORS, ELECTRICAL, ENVIRONMENT RESISTING, MINIATURE, WITH SNAP-IN CONTACTS, OR HERMETICALLY SEALED WITH NON-REMOVABLE CONTACTS, GENERAL SPECIFICATION FOR |
|
MIL-DTL-83798-5 Revision E:2017
|
Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, 45 Degrees |
|
MIL-HDBK-510 Revision A:2014
|
AEROSPACE FUELS CERTIFICATION |
|
AN842 Revision 13:2013
|
ELBOW - PIPE TO HOSE, 90 DEGREES |
|
BS ISO 7169:2014
|
Aerospace. Separable tube fittings for fluid systems, for 24° cones, for pressures up to 3 000 psi or 21 000 kPa. Procurement specification, inch/metric |
|
MIL-PRF-1-1718 Revision A:1998
|
ELECTRON TUBE, GAS SWITCHING TYPE 8922 |
|
MIL-DTL-81716 Revision A:2009
|
PACKING, PREFORMED, STRAIGHT THREADED TUBE FITTING BOSS, TYPE 2 HYDRAULIC (-65 DEGREES F TO +275 DEGREES F) |
|
MIL-DTL-32464-8 Base Document:2013
|
MALE ADAPTER, 90 DEGREES ELBOW, BULKHEAD, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI |
|
AN844 Revision 13:2013
|
ELBOW - PIPE TO HOSE, 45 DEGREES |
|
MIL-DTL-24251-3 Revision D:2013
|
Shield, Electron Tube, Heat Dissipating 7 and 9 Pin, Miniature (Split Shell) |
|
A-A-55538 Revision A:2013
|
Waterproof Spark Plug Lead and Conduit Assembly (other than Aircraft) |
|
MIL-DTL-55302-38 Revision C:2007
|
Connectors, Printed Circuit Subassembly and Accessories: Plug, Electrical, Polarized Shell, Male, .100 Inch Contact Spacing Pin Terminal |
|
MS 16842 : H
|
CLAMP, WIRE ROPE, SADDLED, SINGLE-GRIP, STEEL, TYPE 1 (MALLEABLE-IRON AND STEEL SADDLE) |
|
A-A-59440-3 Revision B:2012
|
COCK-VALVE, DRAIN, SPRING KEY, BRASS, 50 PSI, WATER, OIL, AND GAS (WOG), NPTF-1 THREADS |
|
AN807 Revision 7:2007
|
Adapter, Straight, Tube to Hose |
|
MIL-DTL-6001 Revision B:2013
|
FITTINGS; AIRCRAFT, SOLDER TYPE, TUBE |
|
MIL-DTL-52525-13 Revision C:2008
|
FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE STRAIGHT |
|
MIL-DTL-38999 Revision M:2015
|
Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded or Breech Coupling), Environment Resistant with Crimp Removable Contacts or Hermetically Sealed with Fixed, Solderable Contacts, General Specification for |
|
MIL-DTL-32464 Revision A:2017
|
FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES SPHERICAL TO ANPT CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR |
|
MIL-DTL-32464-10 Base Document:2013
|
MALE ADAPTER, LONG, NIPPLE TUBE, HYDRAULIC AND PNEUMATIC TUBE, LONG HEX, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI |
|
DSCC 86092 : B
|
HOLDER, ELECTRICAL CARD, CARD GUIDE-RETAINER, LEVER ACTUATED, METAL, FOR COLD PLATE MOUNTING |
|
SAE AMS 8660 : 2018
|
SILICONE COMPOUND NATO CODE NUMBER S-736 |
|
MS20760 Revision D:2013
|
ADAPTER, STRAIGHT, FLANGE TO TUBE |
|
MIL-DTL-32371 Base Document:2012
|
Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for |
|
SAE AS 6450 : 2012(S2019)
|
LUBRICANT APPLICATION, SOLID FILM, HEAT CURED, POTABLE WATER, HYDRAULIC, AND OTHER FLUID SYSTEMS |
|
MIL-DTL-32460-7 Base Document:2013
|
FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL |
|
MS27611 Revision H:2018
|
VALVE, HYDRAULIC BLEEDER, AIRCRAFT WHEEL BRAKE |
|
MIL-DTL-32460-5 Base Document:2013
|
FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD |
|
MIL-DTL-32464-5 Base Document:2013
|
MALE ADAPTER, NIPPLE TUBE, HYDRAULIC AND PNEUMATIC, REGULAR HEX, 37 DEGREES SPHERICAL TO NPTF, 1500-3000 PSI |
|
SAE AIR 5919 : 2017
|
ALTERNATIVES TO CADMIUM PLATING |
|
SAE AS 81659 : 2017
|
CONNECTORS, ELECTRICAL, RECTANGULAR CRIMP CONTACTS, GENERAL SPECIFICATION FOR |
|
SAE AS 39901 : 2012
|
BEARINGS, ROLLER, NEEDLE, AIRFRAME, ANTIFRICTION, INCH |
|
SAE AS 45909 : 2015
|
STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR |
|
SAE AS 18280 : 2017
|
FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI |
|
NASM24694:2012
|
SCREW, MACHINE, FLAT COUNTERSUNK HEAD, 100 DEGREES, STRUCTURAL, CROSS RECESSED, UNC-3A AND UNF-3A |
|
MIL-DTL-5015 Revision H:2000
|
CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE - GENERAL SPECIFICATION FOR |
|
MIL-DTL-45932 Revision A:2015
|
INSERT, SCREW THREAD, THIN WALL, LOCKED IN: GENERAL SPECIFICATION FOR |
|
SAE AS 82819 : 2013
|
BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 300 CPM OSCILLATION (13 FPM), -65 TO +160 DEGREES F (-54 TO +71 DEGREES C), LINERS LESS THAN 0.015 INCHES |
|
MIL-DTL-52525-5 Revision D:2011
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT |
|
NASM 21059 : 2002
|
NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, LOW HEIGHT STEEL, 125 KSI FTU, 450 DEGREES F |
|
MIL-DTL-52525-34 Revision B:2008
|
FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, STRAIGHT |
|
MIL-DTL-52525-2 Revision C:2008
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE |
|
DOD-W-63546 Revision A:1982
|
WASHER, KEY, METRIC GENERAL SPECIFICATION FOR |
|
MIL-DTL-18866 Revision J:2015
|
Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, General Specification for |
|
MS39202 Revision G:2012
|
ELBOWS, PIPE TO TUBE - SAFETY SLEEVE COMPRESSION TYPE, 90 DEGREE, MALE PIPE END |
|
MS39201 Revision G:2012
|
NIPPLE, TUBE-SAFETY SLEEVE COMPRESSION TYPE |
|
MS27769 Revision B:2011
|
PLUG, PIPE, COUNTERSUNK HEX HEAD |
|
MIL-DTL-26482 Revision H:2007
|
Connectors, Electrical, Circular, Miniature, Quick Disconnect, Environment Resisting, Receptacles and Plugs, General Specification for |
|
FF-C-450 Revision G:2017
|
CLAMPS, WIRE ROPE |
|
MIL-HDBK-510-1 Revision A:2010
|
AEROSPACE FUELS CERTIFICATION |
|
SAE AS 18280/1 : 2017
|
SLEEVE, BITE TYPE, 24 DEGREE CONE FLARELESS FITTING, 3000 PSI |
|
MIL-DTL-32460-1 Base Document:2013
|
FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE |
|
MS20762 Revision D:2016
|
ELBOW, FLARED TUBE, FLANGED, SWIVEL, 90 DEGREES |
|
MIL-DTL-6193 Revision E:2017
|
JOINTS, UNIVERSAL, PLAIN, LIGHT AND HEAVY DUTY, GENERAL SPECIFICATION FOR |
|
MS24361 Revision C:2016
|
RING, SPLIT - TYPE MA-2, FLIGHT PRESSURE REFUELING, RECEPTION COUPLING |
|
MS51868 Revision E:2017
|
CLAMP, WIRE ROPE, DOUBLE SADDLED, DOUBLE-GRIP, STEEL, TYPE 3 |
|
MS39324 Revision C:2017
|
ADAPTER, 37 DEGREE, FLARE TO 'O' RING BOSS, 45 DEGREE FLARE |
|
MIL-DTL-70337 Revision A:2015
|
RING, RETAINING, ROUND SECTION |
|
MIL-DTL-8348 Revision K:2008
|
Gage Assemblies, Air Pressure, Dial Indicating Chuck Type, Self-Contained |
|
MIL-DTL-32373 Base Document:2011
|
Plug, Machine Thread, Magnetic: Drain |
|
MS51842 Revision E:2017
|
ELBOW, TUBE TO BOSS 45 DEGREE, O-RING, FLARELESS TYPE, HYDRAULIC |
|
MS28760 Revision E:2007
|
Fitting End, Straight, Attachable, Hydraulic and Pneumatic, High Pressure Hose 3000 PSI, Flared Tube |
|
MIL-DTL-24251-4 Revision D:2013
|
RETAINER (BASE),AND ADAPTER, ELECTRON TUBE, HEAT DISSIPATING, 7 AND 9 PIN, MINIATURE |
|
MIL-DTL-6807 Revision F:2012
|
Switches, Rotary, Selector Power, General Specification for |
|
MIL-DTL-62011-1 Base Document:2009
|
PUMP, FUEL, ELECTRICALLY-OPERATED: 24-VOLT DC, IN-TANK TYPE, TOP-MOUNTED CONNECTOR, TYPE 1 |
|
10/30227764 DC : 0
|
BS EN 6115 - AEROSPACE SERIES - BOLT - PROTRUDING HEAD, SHORT THREAD - INCH SERIES |
|
MIL-DTL-32460-6 Base Document:2013
|
FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD |
|
MIL-DTL-32460 Revision A:2017
|
ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR |
|
MIL-DTL-83796-1 Revision C:2014
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE |
|
MIL-DTL-83798 Revision D:2008
|
FITTING, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
|
A-A-55563 Revision D:2013
|
Holder, Electrical Card, Metal Card Guide, General Requirements for |
|
MIL-DTL-52525-38 Revision B:2008
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE |
|
MIL-DTL-5675 Revision C:2005
|
Shackle: Cable, Aircraft |
|
MIL-DTL-83796-13 Base Document:2008
|
Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flareless to Flareless, with Lockwire Hole |
|
MS51512 Revision D:2017
|
TEE, PIPE TO TUBE, MALE PIPE ON BRANCH, 37 DEGREE FLARED |
|
MIL-DTL-52525-3 Revision D:2011
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, SHORT DROP |
|
MS51531 Revision B:1985
|
NUT, TUBE COUPLING, 37 DEGREE FLARED |
|
MS39322 Revision B:2017
|
ADAPTER: 37 DEGREE FLARE, FEMALE SWIVEL TO WELD SOCKET, 3/4 INCH TO 1 INCH |
|
MIL-DTL-32464-11 Base Document:2013
|
MALE ADAPTER, BULKHEAD, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI |
|
MIL-DTL-55181 Revision F:2012
|
CONNECTORS, PLUG AND RECEPTACLE, INTERMEDIATE POWER (ELECTRICAL, WATERPROOF), TYPE MW, GENERAL SPECIFICATION FOR |
|
MIL-DTL-27235 Revision B:2014
|
PIN, STRAIGHT, HEADED (CLEVIS PINS) |
|
MS51533 Revision A:1979
|
SLEEVE, COMPRESSION, TUBE FITTING, 37 DEGREE FLARED |
|
MS35645 Revision G:2011
|
CAP, FUEL TANK: TACTICAL VEHICLE, FORDING |
|
MS51526 Revision A:1979
|
ADAPTER, STRAIGHT, TUBE TO BOSS, O-RING, 37 DEGREE FLARED (LONG) |
|
MIL-STD-870 Revision C:2007
|
Cadmium Plating, Low Embrittlement, Electrodepositon |
|
MIL-DTL-12520 Revision D:2005
|
Connectors, Plug and Receptacle (Electrical, Waterproof), and Accessories; General Specification for |
|
MIL-DTL-2 Revision G:2006
|
VALVES, CYLINDER, GAS (FOR COMPRESSED OR LIQUEFIED GASES), GENERAL SPECIFICATION FOR |
|
FF-C-450-1 Revision B:2017
|
CLAMP, WIRE ROPE, DOUBLE-GRIP, STEEL, DOUBLE SADDLED, TYPE 2 |
|
MIL-DTL-24308-25 Revision K:2008
|
Connectors, Electric, Rectangular, Miniature, Polarized Shell, Rack and Panel, Screw-Lock Assembly, Male |
|
ISO 9216:2002
|
Aerospace — Nuts, hexagonal, slotted (castellated), for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated — Dimensions and masses |
|
MS24120 Revision E:2004
|
RING, COUPLING, ROTATING |
|
MS51530 Revision B:1988
|
FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; TEE, TUBE TO BOSS, BOSS ON RUN, O-RING, 37 DEGREE FLARED |
|
MS20756 Revision F:2011
|
FLANGE, SWIVEL, RETAINING |
|
SAE AS 81819 : 2010
|
BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, HIGH SPEED OSCILLATION -65 TO +160 DEGREES F GENERAL SPECIFICATION FOR |
|
MIL-DTL-32372-11 Revision A:2017
|
Fitting, Adapter, Tee, Hydraulic and Pneumatic, ORFS Male to ORFS Female Swivel to NPTF Male on Branch |
|
MIL-DTL-52525-9 Revision C:2008
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT |
|
MIL-DTL-83796-3 Revision C:2014
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS |
|
MS20761 Revision C:2016
|
ELBOW, FLARED TUBE, FLANGED, SWIVEL, 45 DEGREES |
|
MIL-DTL-55302-102 Revision E:2006
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, STRAIGHT-THRU, HERMAPHRODITIC CONTACT, CRIMP REMOVABLE, FOR PRINTED WIRING BOARDS (.100 INCH SPACING) |
|
MIL-DTL-24211 Revision D:2016
|
GASKETS, WAVEGUIDE FLANGE, GENERAL SPECIFICATION FOR |
|
AN914 Revision 11:2012
|
ELBOW, PIPE, INTERNAL AND EXTERNAL THREAD, 90 DEGREES |
|
MIL-DTL-25308 Revision C:2010
|
GAGE, PRESSURE, DIAL INDICATING, HYDRAULIC, TYPE ME-1 |
|
SAE AS 19692 : 2016
|
Aerospace – Military Type Variable Delivery, Pressure Compensated Hydraulic Pump |
|
SAE AS 85049 : 2016
|
CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR |
|
SAE AS 8914 : 2016
|
BEARING, ROLLER, SELF-ALIGNING, AIRFRAME, ANTIFRICTION |
|
SAE AS 81703 : 2012
|
CONNECTORS, ELECTRIC, CIRCULAR, MINIATURE, RACK AND PANEL OR PUSH-PULL COUPLING, ENVIRONMENT RESISTING |
|
SAE AS 4842 : 2016
|
FITTINGS AND BOSSES, PIPE THREADED, FLUID CONNECTION |
|
NASA KSC DE 512-SM : 2012
|
FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
|
MIL-DTL-13791 Revision H:2015
|
DISTRIBUTOR, IGNITION SYSTEM: INTEGRAL COIL, WATERPROOF 24 VOLT |
|
MIL-DTL-52525-17 Revision C:2008
|
FITTINGS, CLAMP-HALVES, FLANGE TO PORT, FOR 4-BOLT SPLIT-FLANGE |
|
MIL-DTL-45910 Revision D:2015
|
INSERT, SCREW THREAD-LOCKED IN AND RING LOCKED, SERRATED GENERAL SPECIFICATION FOR |
|
DSCC 88052 : D
|
HOLDER, ELECTRICAL CARD, CARD GUIDE-RETAINER, SCREW ACTUATED, METAL |
|
MIL-DTL-28840 Revision D:2013
|
CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLASS D, GENERAL SPECIFICATION FOR |
|
MIL-DTL-52525-40 Revision B:2008
|
FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, STRAIGHT |
|
MIL-DTL-52525-31 Revision B:2008
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL |
|
MIL-DTL-22442-32 Revision C:2005
|
CABLE ASSEMBLY, AIRCRAFT AUDIO, ASSOCIATED PARTS |
|
MIL-DTL-21248 Revision D:2015
|
Ring, Retaining (Tapered and Reduced Section Type) |
|
MIL-DTL-52525 Revision F:2008
|
FITTINGS, HOSE, HYDRAULIC, REUSABLE, FIELD-ATTACHABLE AND CLAMP-HALVES, TO MATE WITH SAE-J517 TYPE HOSES, GENERAL SPECIFICATION FOR |
|
MIL-DTL-55302-42 Revision C:2007
|
CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, ELECTRICAL, POLARIZED SHELL, FEMALE, .100 INCH CONTACT SPACING, REMOVABLE CRIMP CONTACTS |
|
I.S. EN 6101:2016
|
AEROSPACE SERIES - RIVET, 100 DEGREES MEDIUM FLUSH HEAD, CLOSE TOLERANCE - INCH SERIES |
|
MIL-DTL-32480-2 Base Document:2014
|
Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male |
|
MIL-DTL-83723 Revision H:2016
|
CONNECTORS, ELECTRICAL, CIRCULAR, ENVIRONMENT RESISTING AND HERMETICALLY SEALED, RECEPTACLES AND PLUGS, GENERAL SPECIFICATION FOR |
|
MIL-DTL-12520-11 Revision B:2005
|
Connectors, Receptacle, Electrical Waterproof (Shelf Size 26, Female Inserts) |
|
MIL-DTL-24308 Revision G:2009
|
Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack and Panel, General Specification for |
|
MS28761 Revision C:2007
|
Fitting End, Straight, Attachable, Hydraulic, High Pressure Hose 3000 PSI, Flareless Tube |
|
MIL-DTL-32480-8 Base Document:2014
|
Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel |
|
MIL-DTL-32460-4 Base Document:2013
|
FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD |
|
NASM 20613 : 2005
|
RIVET, SOLID, UNIVERSAL HEAD, STEEL, CARBON AND STEEL, CORROSION-RESISTANT |
|
MS51522 Revision C:2017
|
ELBOW, TUBE, 45 DEGREE SWIVEL, 37 DEGREE FLARED |
|
SAE AS 4941 : 2015
|
AEROSPACE - GENERAL REQUIREMENTS FOR COMMERCIAL AIRCRAFT HYDRAULIC COMPONENTS |
|
MIL-DTL-32372-5 Revision A:2017
|
Fitting, Adapter, 45 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Bulkhead |
|
MS25224 Revision H:2006
|
GUARD, SWITCH, 2 POSITION |
|
MIL-DTL-45918 Revision A:2009
|
CLEVISES AND CONNECTORS (ROD END) |
|
MIL-DTL-32464-3 Base Document:2013
|
MALE ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI |
|
MIL-DTL-24251-6 Revision E:2013
|
SHIELD, ELECTRON TUBE, HEAT DISSIPATING, 7 AND 9 PIN, MINIATURE (RETROFIT TYPE ONLY) |
|
MIL-DTL-27599 Revision E:2016
|
CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTANT, SOLDER CONTACTS, GENERAL SPECIFICATION FOR |
|
MIL-DTL-55422 Revision B:2011
|
CLIP, ELECTRICAL, GRID AND ANODE, GENERAL SPECIFICATION FOR |
|
MIL-DTL-32372-10 Revision A:2017
|
Fitting, Adapter, Tee, Hydraulic and Pneumatic, ORFS Female Run to Run to NPTF Male on Branch |
|
MS75028 Revision K:2005
|
SWITCH, TOGGLE, ONE POLE, UNSEALED |
|
ISO 9217:2002
|
Aerospace — Washers, chamfered, with counterbore, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated — Dimensions and masses |
|
16/30354035 DC : 0
|
BS EN 4854-2 - AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS, WIDE SERIES - DIMENSIONS AND LOADS |
|
MS25034 Revision K:2006
|
GUARD, SWITCH, 3 POSITION |
|
MIL-STD-171 Revision F:2011
|
FINISHING OF METAL AND WOOD SURFACES |
|
MIL-PRF-29602 Revision A:2005
|
CLEANING COMPOUNDS, PARTS WASHER AND SPRAY CABINET |
|
MIL-DTL-5070 Revision F:2006
|
ADAPTER, HOSE TO TUBE, PIPE AND FLANGE, REUSABLE - HYDRAULIC, FUEL, AND OIL LINES, GENERAL SPECIFICATION FOR |
|
MIL-DTL-32480-3 Base Document:2014
|
Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male |
|
MS27752 Revision D:2006
|
GUARD, SWITCH, 3 POSITION |
|
MS24417 Revision K:2005
|
GUARD, SWITCH, 2 OR 3 POSITION |
|
MIL-DTL-52471-8 Revision B:2008
|
HOSE ASSEMBLIES, RUBBER: HYDRAULIC PRESSURE-TYPE; TYPE 100RE |
|
SAE AS 5528 : 2016
|
LUBRICANT APPLICATION, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
|
MIL-DTL-8789 Revision G:2015
|
FITTING END, ATTACHABLE, HYDRAULIC, HIGH PRESSURE (3,000 PSI), GENERAL SPECIFICATION FOR |
|
MIL-DTL-32460-9 Base Document:2013
|
FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL |
|
AN848 Revision 13:2015
|
Elbow, Hose, 90 Degree |
|
AN 840 : 0011
|
ADAPTER, STRAIGHT, PIPE TO HOSE |
|
MIL-DTL-32464-9 Base Document:2013
|
MALE ADAPTER, TEE, BULKHEAD, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 37 DEGREES SPHERICAL ON RUN, 1500-3000 PSI |
|
MS51818 Revision E:1987
|
TEE, PIPE TO TUBE, MALE PIPE ON BRANCH, FLARELESS TYPE, HYDRAULIC |
|
AN 839 : 0009
|
ELBOW, TUBE TO HOSE, 45 DEGREES |
|
MIL-DTL-32371-1 Base Document:2012
|
Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Straight |
|
MIL-DTL-52525-16 Revision D:2008
|
FITTINGS, CLAMP-HALVES, FOR 4-BOLT SPLIT-FLANGE, SAE-J518, TYPE SPLIT-FLANGE CLAMP (SFC) |
|
MIL-DTL-52471-2 Revision C:2008
|
HOSE ASSEMBLIES, RUBBER: HYDRAULIC PRESSURE-TYPE; TYPE 100R2, DOUBLE-WIRE BRAIDED REINFORCEMENT HOSE |
|
MIL-DTL-52525-37 Revision B:2008
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT |
|
MIL-DTL-52471-3 Revision C:2008
|
HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100RE, FOUR-WIRE BRAIDED REINFORCEMENT OR MULTIPLE WIRE BRAIDED STEEL WIRE REINFORCED HOSE |
|
MIL-DTL-21617-29 Base Document:2003
|
CONNECTOR, RECEPTACLE ELECTRICAL, RECTANGULAR, POLARIZED SHELL, MINIATURE TYPE, BACK SHELLS |
|
MS51841 Revision E:2017
|
TEE, TUBE TO BOSS, BOSS ON BENCH, O-RING, FLARELESS TYPE, HYDRAULIC |
|
SAE ARP 1070E : 2019
|
DESIGN AND TESTING OF ANTISKID BRAKE CONTROL SYSTEMS FOR TOTAL AIRCRAFT COMPATIBILITY |
|
SAE AS 81582 : 2017
|
CONNECTORS, ELECTRICAL, BAYONET COUPLING, ENVIRONMENT RESISTING, UMBILICAL, GENERAL SPECIFICATION FOR |
|
SAE ARP 1070 : 2014
|
DESIGN AND TESTING OF ANTISKID BRAKE CONTROL SYSTEMS FOR TOTAL AIRCRAFT COMPATIBILITY |
|
SAE AMS 3167 : 2005
|
SOLVENTS, WIPE FOR CLEANING PRIOR TO APPLICATION OF PRIMER AND TOP COAT MATERIALS, OR SEALING COMPOUNDS |
|
ISO 7169:2014
|
Aerospace Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa Procurement specification, inch/metric |
|
PREN 6101 : 200P2
|
AEROSPACE SERIES - RIVET, 100 DEGREES MEDIUM FLUSH HEAD, CLOSE TOLERANCE - INCH SERIES |
|
BS EN 6101:2016
|
Aerospace series. Rivet, 100° medium flush head, close tolerance. Inch series |
|
FF-S-1362 Revision A:2014
|
STUD, PLAIN, GENERAL PURPOSE |
|
MIL-DTL-9398 Revision D:2007
|
GENERATOR, TACHOMETER, TWO-POLE, HIGH TEMPERATURE, AIRCRAFT |
|
EN 6101:2016
|
Aerospace series - Rivet, 100° medium flush head, close tolerance - Inch series |
|
MS51517 Revision C:2017
|
CROSS, TUBE, 37 DEGREE FLARED |
|
MIL-DTL-32372-1 Revision A:2017
|
Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Male |
|
MIL-DTL-28748-16 Base Document:2004
|
Connectors, Electrical, Hexagonal, Rack and Panel, Miniature, Plug-Receptacle, Female Solder Cup Pin Contacts, Size 20 |
|
MIL-DTL-32480-9 Base Document:2014
|
Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel |
|
MIL-DTL-32371-5 Base Document:2012
|
Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Union Cross, Spherical on Branch |
|
MIL-DTL-32371-7 Base Document:2012
|
Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 45 Degrees Elbow, Bulkhead |
|
MS51500 Revision F:2017
|
FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, ADAPTER, STRAIGHT, PIPE TO TUBE, MALE END, 37 DEGREE FLARED |
|
MIL-DTL-3992 Revision F:2007
|
HOSE AND HOSE ASSEMBLY, RUBBER, AIR AND VACUUM BRAKE, SYSTEMS |
|
MS51505 Revision C:2016
|
ELBOW, TUBE, 90 DEGREE, 37 DEGREE FLARED |
|
MIL-DTL-25867 Revision D:2006
|
GAGE, PRESSURE, DIAL INDICATING, PNEUMATIC |
|
DSCC 85020 : G
|
HOLDER, ELECTRICAL CARD, CARD GUIDE, METAL, WITHOUT FLARED ENTRY |
|
MS27612 Revision M:2013
|
ADAPTER, HYDRAULIC BLEEDER VALVE, AIRCRAFT WHEEL BRAKE |
|
MIL-DTL-32480-4 Base Document:2014
|
Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead |
|
MIL-DTL-52525-45 Base Document:2008
|
FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREES BENT TUBE |
|
DSCC 85021 : C
|
HOLDER, ELECTRICAL CARD, CARD GUIDE, METAL, WITH FLARED ENTRY |
|
MS51513 Revision D:2017
|
TEE, PIPE TO TUBE, FEMALE PIPE ON BRANCH, 37 DEGREE FLARED |
|
MIL-DTL-52525-8 Revision C:2008
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, LONG DROP |
|
MIL-DTL-32371-2 Base Document:2012
|
Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 45 Degrees Elbow |
|
MS51506 Revision E:2017
|
FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, ELBOW, PIPE TO TUBE, 90 DEGREE, FEMALE PIPE END, 37 DEGREE FLARED |
|
MS51527 Revision D:2000
|
Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, Steel; Elbow, Tube to Boss, 90 Degree, O-Ring, 37 Degree Flared |
|
MIL-DTL-52525-39 Revision B:2008
|
FITTINGS, HOSE, SCREW-ON TO 37DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE |
|
MS39325 Revision C:2006
|
HOSE ASSEMBLIES; AIR (TYPE 1) AND VACUUM (TYPE 2) BRAKE 3/8 INCH NOMINAL DIAMETER |
|
MS51815 Revision F:1987
|
ELBOW PIPE TO TUBE 90 DEGREE, MALE PIPE END, FLARELESS TYPE, HYDRAULIC |
|
MS39323 Revision C:2017
|
FITTING, TUBE, REDUCER: 37 DEGREE FLARE |
|
MS51523 Revision C:2017
|
TEE, TUBE TO SWIVEL, SWIVEL ON RUN, 37 DEGREE FLARED |
|
MIL-DTL-52525-14 Revision C:2008
|
FITTINGS, HOSE CRIMP TYPE, SPLIT-FLANGE 45 DEGREES BENT |
|
MIL-DTL-83796-12 Base Document:2008
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS |
|
MIL-DTL-21617 Revision B:2012
|
CONNECTORS, PLUG AND RECEPTACLE, ELECTRICAL, RECTANGULAR, POLARIZED SHELL, MINIATURE TYPE, GENERAL SPECIFICATION FOR |
|
MS51511 Revision D:2017
|
TEE, PIPE TO TUBE, MALE PIPE ON RUN, 37 DEGREE FLARED |
|
MS51812 Revision F:1987
|
NIPPLE, TUBE, BULKHEAD, FLARELESS TYPE HYDRAULIC |
|
MS51515 Revision D:2017
|
TEE, TUBE, BULKHEAD ON BRANCH, 37 DEGREE FLARED |
|
MIL-DTL-52525-42 Revision B:2008
|
FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE 90 DEGREES BENT |
|
MIL-DTL-52525-41 Revision A:2008
|
FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREES BENT TUBE |
|
MS51817 Revision E:1987
|
ELBOW, PIPE TO TUBE, 45 DEGREE MALE PIPE END, FLARELESS TYPE, HYDRAULIC |
|
MS51820 Revision E:1987
|
ELBOW, TUBE, 90 DEGREE, FLARELESS TYPE, HYDRAULIC |
|
MS51518 Revision C:2017
|
PLUG, MACHINE THREAD, 37 DEGREE FLARED |
|
MS51813 Revision E:1987
|
ELBOW, PIPE TO TUBE 90 DEGREE, FEMALE PIPE END, FLARELESS TYPE, HYDRAULIC |
|
SAE AS 4875 : 2016
|
FITTINGS, STRAIGHT THREADED BOSS OR FLANGED, FLUID CONNECTION |
|
MIL-DTL-83798-2 Revision D:2017
|
Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, 45 Degrees |
|
MIL-DTL-52525-12 Revision D:2011
|
FITTINGS, HOSE, SCREW ON TO SPLIT-FLANGE 90 DEGREES BENT |
|
MIL-DTL-32460-2 Base Document:2013
|
FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE |
|
MIL-DTL-52525-33 Revision A:2008
|
FITTINGS, WIRE REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES: FIELD ATTACHABLE (REUSABLE), SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, FOR USE WITH TYPE 100RE FOUR-SPRIAL-WRAP REINFORCEMENT HOSE |
|
SAE AS 7949 : 2004
|
BEARINGS, BALL, AIRFRAME, ANTIFRICTION, GENERAL STANDARD |
|
MIL-DTL-24251-5 Revision D:2013
|
SHIELD, ELECTRON TUBE, HEAT DISSIPATING, 7 AND 9 PIN, MINIATURE (OPEN SIDES) |
|
MIL-DTL-3390 Revision H:2011
|
RINGS, DEE |
|
MS 16843 : H
|
CLAMP, WIRE ROPE (DOUBLE GRIP), THREADED, STEEL, TYPE 4 |
|
MS25214 Revision G:2010
|
GUARD, SWITCH, 3 POSITION |
|
SAE AS 81511 : 2016
|
CONNECTORS, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING AND ACCESSORIES, GENERAL SPECIFICATION FOR |
|
MIL-DTL-52525-4 Revision D:2011
|
FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, LONG DROP |
|
MIL-DTL-62011 Revision E:2009
|
Pump, Fuel, Electrically-Operated: 24-Volt DC, In-Tank Type, General Specification for |
|
MIL-DTL-83798-6 Revision D:2017
|
Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, 90 Degrees |
|
MIL-DTL-25677 Revision G:2016
|
ADAPTER, CAP, AND NOZZLE, PRESSURE LUBRICATING OIL SERVICING, AIRCRAFT, GENERAL SPECIFICATION FOR |
|
MIL-DTL-83413-6 Revision C:2008
|
CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING: RECEPTACLES, TWO PIECE, WITH INSERTS AND HOUSINGS |
|
MIL-DTL-32372-3 Revision A:2017
|
Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, NPTF Male to ORFS Male |
|
MIL-PRF-32587 Base Document:2018
|
Remover, Paint, Hap-Free, Neutral |
|
MS51504 Revision C:2016
|
ELBOW, PIPE TO TUBE, 90 DEGREE MALE PIPE END, 37 DEGREE FLARED |
|
MS25223 Revision H:2005
|
GUARD, SWITCH, 3 POSITION |
|
MIL-DTL-25866 Revision C:2010
|
LIGHT, EMERGENCY EXIT, AIRCRAFT LEU-1/A |
|
MIL-DTL-5003 Revision E:2010
|
FLOODLIGHT SET, ELECTRIC, TRIPOD-MOUNTED, FOUR 150-WATT FLOODLIGHTS |
|
MS25452 Revision H:2010
|
Guard, Switch, 2 Position, Lock |
|
MIL-DTL-83796-2 Revision C:2014
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE, WITH LOCKWIRE HOLE |
|
MIL-DTL-83798-1 Revision D:2017
|
Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, Straight |
|
MIL-DTL-3643 Revision B:2003
|
Connectors, Coaxial, Radio Frequency, Series HN, and Associated Fittings, General Specification for |
|
MIL-DTL-83798-3 Revision D:2017
|
Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, 90 Degrees |
|
MIL-DTL-12520-10 Revision B:2005
|
Connectors, Receptacle, Electrical Waterproof (Shell Size 26, Male Inserts) |
|
SAE AS 4843 : 2016
|
FITTINGS, BEADED, FLUID CONNECTION |
|
SAE AS 83819 : 2013
|
BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 1400 CPM (15 FPM), OSCILLATION, -65 TO +160 DEGREES F (-54 TO +71 DEGREES C) |
|
SAE AIR 4789 : 2016
|
AEROSPACE INFORMATION REPORT ON EVALUATING CORROSION TESTING OF ELECTRICAL CONNECTORS AND ACCESSORIES FOR THE PURPOSE OF QUALIFICATION |
|
NASM 21083 : 2004
|
NUT, SELF-LOCKING, HEXAGON, NON-METALLIC INSERT, LOW HEIGHT, 250 DEGREES F |
|
MIL-STD-1568 Revision D:2015
|
Materials and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems |
|
SAE AMS 2451/4D : 2017
|
PLATING, BRUSH, CADMIUM CORROSION PROTECTIVE, LOW HYDROGEN EMBRITTLEMENT |
|
SAE AS 81820 : 2014
|
BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW SPEED OSCILLATION |
|
PREN 6131 : 200P3
|
AEROSPACE SERIES - COMPOSITE CLIP NUT, SELF LOCKING |
|
PREN 6118 : DRAFT 2016
|
AEROSPACE SERIES - PROCESS SPECIFICATION - ALUMINIUM BASE PROTECTION FOR FASTENERS |