SAE AS12500
Current
Current
The latest, up-to-date edition.
Corrosion Prevention and Deterioration Control in Electronic Components and Assemblies
Available format(s)
Hardcopy , PDF
Language(s)
French, English
Published date
24-04-2018
Publisher
€127.00
Excluding VAT
FOREWORD
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE
5. PACKAGING
6. NOTES
7. NOTES
Specifies corrosion prevention and mitigation aspects in Avionics, Electronics, and Electrical Wire Interconnect Systems (EWIS) from the design through the life cycle of aerospace and other systems.
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
SAE International
|
| Status |
Current
|
This specification covers corrosion prevention and mitigation aspects in Avionics, Electronics, and Electrical Wire Interconnect Systems (EWIS) from the design through the life cycle of aerospace and other systems.
| SAE AMS2416L | Plating, Nickel-Cadmium Diffused |
| MIL-M-24041 Revision C:1981 | Molding and Potting Compound, Chemically Cured, Polyurethane |
| ASTM D 495 : 2014 | Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation |
| SAE AMS2404G | Plating, Electroless Nickel |
| ASTM D 3955 : 2013 : REDLINE | Standard Specification for Electrical Insulating Varnishes |
| SAE AMSQQP416E | Plating, Cadmium (Electrodeposited) |
| MIL-STD-883 Revision K:2016 | Microcircuits |
| MIL-D-3464 Revision E:1987 | Desiccants, Activated, Bagged, Packaging Use and Static Dehumidification |
| ASTM G 21 : 2015 : REDLINE | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
| SAE AS4461C | Assembly and Soldering Criteria for High Quality/High Reliability Soldering Wire and Cable Termination in Aerospace Vehicles |
| MIL-DTL-45204 Revision D:2007 | Gold Plating, Electrodeposited |
| MIL-PRF-23586 Revision F:1996 | Sealing Compound (With Accelerator), Silicone Rubber, Electrical |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| MIL-STD-2073-1 Revision E:2008 | Standard Practice for Military Packaging |
| ASTM G 85 : 2011 : REDLINE | Standard Practice for Modified Salt Spray (Fog) Testing |
| ASTM E 595 : 2015 : REDLINE | Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment |
| SAE AMSS7124B | Sealing Compound, Polysulfide, Accelerator Required, For Aircraft Structures |
| SAE AMSQQN290C | Nickel Plating (Electrodeposited) |
| ASTM B 545 : 2013 : REDLINE | Standard Specification for Electrodeposited Coatings of Tin |
| MIL-DTL-85054 Revision D:2010 | Corrosion Preventive Compound, Water-Displacing, Transparent (Formerly AMLGUARD) |
| MIL-STD-1686 Revision C:1995 | Electrostatic Discharge Control Program for Protection of Electrical and Electronic Parts, Assemblies and Equipment (Excluding Electrically Initiated Explosive Devices) (S/S by ANSI/ESD S20.20) |
| MIL-PRF-46002 Revision D:2010 | Preservative Oil, Contact and Volatile Corrosion-Inhibited |
| SAE AMS2418J | Plating, Copper |
| MIL-HDBK-454 Revision B:2007 | General Guidelines for Electronic Equipment |
| MIL-PRF-81309 Revision G:2014 | Corrosion Preventive Compounds, Water Displacing, Ultra-Thin Film |
| MIL-STD-889 Revision C:2016 | Galvanic Compatibility of Electrically Conductive Materials |
| MIL-DTL-117 Revision H:2001 | Bags, Heat-Sealable |
| MIL-L-23398 Revision D:1985 | Lubricant, Solid Film, Air-Cured, Corrosion Inhibiting, NATO Code Number S-749 |
| MIL-DTL-83488 Revision D:1999 | Coating, Aluminum, High Purity |
| MIL-DTL-5541 Revision F:2006 | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
| SAE AMS2460A | Plating, Chromium |
| SAE AS5272E | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification |
| SAE AMS2417J | Plating, Zinc-Nickel Alloy |
| SAE AS22759C | Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy |
| GEIA STD 0005-2 : 2012 | MITIGATING THE EFFECTS OF TIN WHISKERS IN AEROSPACE AND HIGH PERFORMANCE ELECTRONIC SYSTEMS |
| ASTM B 679 : 1998 | Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use |
| MIL-I-17563 Revision C:1992 | Impregnants for Cast of Powder Metal Components |
| MIL-HDBK-83377 Base Document:1997 | Adhesive Bonding (Structural) for Aerospace and Other Systems, Requirements for |
| MIL-STD-276 Revision A:1992 | Impregnation of Porous Metal Castings and Powdered Metal Components |
| NASA MSFC STD 3029 : 2000 | GUIDELINES FOR THE SELECTION OF METALLIC MATERIALS FOR STRESS CORROSION CRACKING RESISTANCE IN SODIUM CHLORIDE ENVIRONMENTS |
| SAE AS29606 | Wire, Electrical, Stranded, Uninsulated Copper, Copper Alloy, or Aluminum, or Thermocouple Extension, General Specification For |
| SAE AMS 03-28-2 : 2017 | PHYSICAL VAPOR DEPOSITION OF METALS: PHYSICAL VAPOR DEPOSITION OF CADMIUM FOR PROTECTION AGAINST CORROSION |
| SAE AMS2401J | Plating, Cadmium Low Hydrogen Content Deposit |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| SAE AMS2759/9D | Hydrogen Embrittlement Relief (Baking) of Steel Parts |
| MIL-STD-186 Revision F:2002 | Manufacturing Process Protective Finishingfor Army Missile Weapon Systems |
| MIL-STD-7179 Revision A:2009 | Finishes, Coatings, and Sealants, for the Protection of Aerospace Weapons Systems and Support Equipment |
| FED-STD-376 Revision B:1993 | Preferred Metric Units for General Use by the Federal Government |
| SAE AS50881F | Wiring Aerospace Vehicle |
| SAE AMS2700E | Passivation of Corrosion Resistant Steels |
| SAE AMS2403M | Plating, Nickel General Purpose |
| MIL-HDBK-838 Base Document:1997 | Lubrication of Military Equipment |
| A-A-59877 Base Document:2010 | Insulating Compound, Electrical, Embedding |
| MIL-PRF-8516 Revision G:1997 | Sealing Compound, Synthetic Rubber, Electric Connectors and Electric Systems, Chemically Cured |
| SAE AMSP81728B | Plating, Tin-Lead (Electrodeposited) |
| SAE AMSC8837A | Coating, Cadmium (Vacuum Deposited) |
| MIL-PRF-46147 Revision D:2008 | Lubricant, Solid Film, Air Cured, Corrosion Inhibiting |
| MIL-PRF-6855 Revision F:2009 | Rubber, Synthetic, Sheets, Strips, Molded or Extruded Shapes, General Specification for |
| A-A-59135 Base Document:1997 | Packaging Material, Sheet |
| SAE AMSC26074D | Electroless Nickel Coatings |
| MIL L 87177 : A | LUBRICANT, CORROSION PREVENTIVE COMPOUND, WATER DISPLACING, SYNTHETIC |
| MIL-PRF-46010 Revision H:2013 | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738 |
| SAE AMS2526D | Molybdenum Disulfide Coating, Thin Lubricating Film Impingement Applied |
| SAE AIR4487A | Investigation of Silver Plated Conductor Corrosion (Red Plague) |
| MIL-I-8574 Revision E:1982 | Inhibitors, Corrosion, Volatile, Utilization of |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.