SAE J 2357 : 2012
Current
Current
The latest, up-to-date edition.
APPLICATION GUIDELINES FOR ELECTRONICALLY DRIVEN AND/OR CONTROLLED EXTERIOR AUTOMOTIVE LIGHTING EQUIPMENT
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-11-2012
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. REFERENCES
3. DEFINITIONS
4. LIGHTING CODES, AND MARKINGS
5. TESTS
6. REQUIREMENTS
7. NOTES
Specifies a guide toward standard practice and is subject to change to keep pace with experience and technical advances.
| DocumentType |
Revision
|
| Pages |
24
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
| SAE J2009:2022(S2022) | Discharge Forward Lighting System and Subsystems |
| SAE J2009:2022 | Discharge Forward Lighting System and Subsystems |
| SAE J 2139 : 2014 | TESTS FOR SIGNAL AND MARKING DEVICES USED ON VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
| SAE J 3069 : 2016 | ADAPTIVE DRIVING BEAM |
| SAE J 1623 : 2015 | OFF-HIGHWAY VEHICLE HEADLAMPS |
| SAE J 2650 : 2013 | PERFORMANCE REQUIREMENTS FOR LIGHT EMITTING DIODE (LED) ROAD ILLUMINATION DEVICES |
| SAE J 3014:2013:(R2018) | HIGHLY ACCELERATED FAILURE TEST (HAFT) FOR AUTOMOTIVE LAMPS WITH LED ASSEMBLY |
| SAE USCAR 27 : 2007 | SPECIFICATION FOR TESTING GAS DISCHARGE LIGHT SOURCE SUBSYSTEM |
| SAE J 2282 : 2011 | DISTRIBUTED LIGHTING SYSTEMS (DLS) |
| SAE USCAR 33 : 2013 | SPECIFICATION FOR TESTING AUTOMOTIVE LED MODULES |
| SAE J 2009 : 2016 | DISCHARGE FORWARD LIGHTING SYSTEM AND SUBSYSTEMS |
| SAE J 2650 : 2013 | PERFORMANCE REQUIREMENTS FOR LIGHT EMITTING DIODE (LED) ROAD ILLUMINATION DEVICES |
| CISPR 16-1-1:2015 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus |
| ISO 11452-10:2009 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 10: Immunity to conducted disturbances in the extended audio frequency range |
| ISO 11452-4:2011 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Harness excitation methods |
| SAE J 1113/13 : 2015 | ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURE FOR VEHICLE COMPONENTS - PART 13: IMMUNITY TO ELECTROSTATIC DISCHARGE |
| ISO 7637-2:2011 | Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only |
| SAE J 1211 : 2012 | HANDBOOK FOR ROBUSTNESS VALIDATION OF AUTOMOTIVE ELECTRICAL/ELECTRONIC MODULES |
| SAE J 1113/12 : 2006 | ELECTRICAL INTERFERENCE BY CONDUCTION AND COUPLING - CAPACITIVE AND INDUCTIVE COUPLING VIA LINES OTHER THAN SUPPLY LINES |
| ISO 10605:2008 | Road vehicles — Test methods for electrical disturbances from electrostatic discharge |
| SAE J 1113/21 : 2013 | ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURE FOR VEHICLE COMPONENTS - PART 21: IMMUNITY TO ELECTROMAGNETIC FIELDS, 30 MHZ TO 18 GHZ, ABSORBER-LINED CHAMBER |
| SAE J 1113/27 : 2012 | ELECTROMAGNETIC COMPATIBILITY MEASUREMENTS PROCEDURE FOR VEHICLE COMPONENTS - PART 27: IMMUNITY TO RADIATED ELECTROMAGNETIC FIELDS - MODE STIR REVERBERATION METHOD |
| SAE J 1889 : 2015 | L.E.D. SIGNAL AND MARKING LIGHTING DEVICES |
| SAE J 2139 : 2014 | TESTS FOR SIGNAL AND MARKING DEVICES USED ON VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
| SAE J1113/4 : 2014 | IMMUNITY TO RADIATED ELECTROMAGNETIC FIELDS - BULK CURRENT INJECTION (BCI) METHOD |
| SAE J 1113/11 : 2012 | IMMUNITY TO CONDUCTED TRANSIENTS ON POWER LEADS |
| SAE J 1113/41 : 2006 | LIMITS AND METHODS OF MEASUREMENT OF RADIO DISTURBANCE CHARACTERISTICS OF COMPONENTS AND MODULES FOR THE PROTECTION OF RECEIVERS IN BOARD VEHICLES |
| CISPR 25:2016 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers |
| SAE J 1455 : 2017 | RECOMMENDED ENVIRONMENTAL PRACTICES FOR ELECTRONIC EQUIPMENT DESIGN IN HEAVY-DUTY VEHICLE APPLICATIONS |
| SAE J 1113/1 : 2013 | ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURES AND LIMITS FOR COMPONENTS OF VEHICLES, BOATS (UP TO 15 M), AND MACHINES (EXCEPT AIRCRAFT) (16.6 HZ TO 18 GHZ) |
| SAE J 1843 : 2009 | ACCELERATOR PEDAL POSITION SENSOR FOR USE WITH ELECTRONIC CONTROLS IN MEDIUM- AND HEAVY-DUTY VEHICLE APPLICATIONS - TRUCK AND BUS |
| SAE J 1812 : 2013(S2018) | FUNCTION PERFORMANCE STATUS CLASSIFICATION FOR EMC IMMUNITY TESTING |
| SAE J 1113/26 : 2014 | ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURE FOR VEHICLE COMPONENTS - IMMUNITY TO AC POWER LINE ELECTRIC FIELDS |
| ISO 11452-2:2004 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Absorber-lined shielded enclosure |
| ISO 11452-1:2015 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology |
| SAE J 575 : 2015 | TEST METHODS AND EQUIPMENT FOR LIGHTING DEVICES FOR USE ON VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
| SAE J 1690 : 1996 | FLASHERS |
| SAE J387_201404 | TERMINOLOGY - MOTOR VEHICLE LIGHTING |
| SAE J 1383 : 2010 | PERFORMANCE REQUIREMENTS FOR MOTOR VEHICLE HEADLAMPS |
| ISO 11452-8:2015 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 8: Immunity to magnetic fields |
| ISO 11452-5:2002 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 5: Stripline |
| CFR 49(PTS400-599) : 0 | TRANSPORTATION |
| SAE J 2009 : 2016 | DISCHARGE FORWARD LIGHTING SYSTEM AND SUBSYSTEMS |
| ISO 11452-11:2010 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 11: Reverberation chamber |
| ISO 11452-7:2003 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 7: Direct radio frequency (RF) power injection |
| IEC 60801-2:1991 | Electromagnetic compatibility for industrial-process measurement and control equipment - Part 2: Electrostatic discharge requirements |
| ISO 11451-1:2015 | Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.