SAE J 517 : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
HYDRAULIC HOSE
Available format(s)
Hardcopy , PDF
Superseded date
29-10-2017
Superseded by
Language(s)
English
Published date
01-01-2016
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.| DocumentType |
Standard
|
| Pages |
37
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE J 2552 : 2014 | PUSH-ON HOSE AND MATING HOSE FITTINGS |
| BS ISO 12619-14:2017 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Flexible fuel line |
| MIL-DTL-32330-2 Revision A:2015 | Hose Assembly, Conductive Polytetrafluoroethylene Tube, Flareless, Tube to Hose with Swivel Nut (No S/S Document) |
| API 16C RUSSIAN : 1993 | SPECIFICATION FOR CHOKE AND KILL SYSTEMS |
| API 16C CHINESE : 1993 | SPECIFICATION FOR CHOKE AND KILL SYSTEMS |
| MIL-DTL-52525-10 Revision D:2011 | Fittings, Hose, Screw-on to 4-Bolt Split-Flange, Straight |
| MIL-DTL-83796-16 Revision A:2010 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLANGE |
| MIL-DTL-83796-10 Revision A:2014 | HOSE ASSEMBLY, RUBBER, LIGHT WEIGHT, INTERNAL SUPPORT COIL, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE |
| MIL-DTL-83796-11 Revision A:2014 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE, WITH LOCKWIRE HOLE |
| A-A-52413 Base Document:1993 | HOSE, RUBBER; OIL SUCTION, WIRE-REINFORCED |
| MIL-DTL-52525-32 Revision A:2008 | FITTINGS, HOSE, REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES: FIELD ATTACHABLE (REUSABLE), SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE, FOR USE WITH TYPE 100RE FOUR-SPIRAL-WRAP REINFORCEMENT HOSE |
| MIL-DTL-52525-44 Base Document:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREES BENT TUBE |
| MIL-DTL-52525-1 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, Straight, SAE-J516 Type, for Assembly with SAE-J517, Type 100R2 Hose |
| MIL-DTL-52525-43 Base Document:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, STRAIGHT |
| MIL-DTL-52525-11 Revision C:2008 | Fittings, Hose, Screw-On to 4-Bolt Split-Flange, 45 Degree Bent Tube |
| MIL-DTL-8795-1 Base Document:2007 | Hose Assembly, Reusable, Hydraulic, Fuel, and Oil Resistant, 3/16 Inch through 3 Inch Tube Sizes |
| MIL-DTL-83796-7 Revision D:2014 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLANGE |
| MIL-DTL-83796-4 Revision C:2014 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS WITH LOCKWIRE HOLE |
| MIL-DTL-52525-6 Revision C:2008 | Fittings,Hose, Screw-on to 37 Degree Flare Female Swivel, 45Degree BentTube |
| CSA B613 : 2000 : R2005 | PRIVATE RESIDENCE LIFTS FOR PERSONS WITH PHYSICAL DISABILITIES |
| MIL-DTL-52525-36 Revision B:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREES BENT TUBE |
| MIL-DTL-52525-15 Revision C:2008 | FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 90 DEGREES BENT TUBE |
| SAE J 1273 : 2014 | RECOMMENDED PRACTICES FOR HYDRAULIC HOSE ASSEMBLIES |
| ISO 12619-14:2017 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 14: Flexible fuel line |
| ASME A17.1 : 2016 | SAFETY CODE FOR ELEVATORS AND ESCALATORS - INCLUDES REQUIREMENTS FOR ELEVATORS, ESCALATORS, DUMBWAITERS, MOVING WALKS, MATERIAL LIFTS, AND DUMBWAITERS WITH AUTOMATIC TRANSFER DEVICES |
| A-A-59405 Base Document:1999 | TRUCKS, LIFT, FORK, ELECTRIC, SIT-DOWN, FRONT WHEEL DRIVE, REAR WHEEL STEER FOR SHIPBOARD USE |
| A-A-59498 Base Document:1999 | TRUCK, FORKLIFT, DIESEL ENGINE DRIVEN, DS SAFETY RATED, FOR SHIPBOARD USE |
| SAE J518/1:2023 | Hydraulic Flange Tube, Pipe, and Hose Connections Four-Screw Flange Connection - Part 1: 3.5 to 35 MPa (Code 61) |
| A-A-59492 Base Document:1999 | TRUCK, FORKLIFT, DIESEL ENGINE DRIVEN, 120 INCH LIFT HEIGHT, DS SAFETY RATED, PNEUMATIC RUBBER TIRES, ROUGH TERRAIN, FOR SHIPBOARD USE |
| A-A-59493 Base Document:1999 | TRUCK, FORK, REACHING AND TIERING, STAND UP RIDER, ELECTRIC, NON-PALLET STRADDLING, SHIPBOARD |
| SAE J 1942 : 2014 | HOSE AND HOSE ASSEMBLIES FOR MARINE APPLICATIONS |
| MIL-DTL-83796-6 Revision D:2014 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLANGE, WITH LOCKWIRE HOLE |
| MIL-DTL-83796-14 Revision A:2010 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flare to Flange |
| MIL-DTL-32330-1 Revision A:2015 | Hose Assembly, Conductive Polytetrafluoroethylene Tube, Flared, Tube to Hose with Swivel Nut (No S/S Document) |
| SAE J 1405 : 2017 | OPTIONAL TEST PROCEDURES FOR HYDRAULIC HOSE ASSEMBLIES |
| SAE J 2093 : 1999 | DESIGN CONSIDERATIONS FOR WHEELCHAIR LIFTS FOR ENTRY TO OR EXIT FROM A PERSONALLY LICENSED VEHICLE |
| 11/30253360 DC : 0 | BS EN ISO 13628-14 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 14: SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS) |
| MIL-T-13300 Revision E:1991 | TRUCKS, HOPPER: COAL DELIVERY, CONVEYER TYPE, DIESEL ENGINE DRIVEN,24,000 GVW, 4X2 AND 39,500 GVW, 6X4, MODIFIED COMMERCIAL |
| MIL-DTL-52525-13 Revision C:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE STRAIGHT |
| SAE J 1754/2 : 2015 | HOSE ASSEMBLIES, RUBBER, HYDRAULIC, STEEL WIRE REINFORCED - PART 2: ORDERING INFORMATION |
| SAE J 1518 : 2013 | THREE POINT HITCH (TYPE A) BACKHOE PERSONNEL PROTECTION |
| ANSI/ASSE A10.19 : 2008 | SAFETY REQUIREMENTS FOR PILE INSTALLATION AND EXTRACTION OPERATIONS |
| SAE J 1927 : 2014 | CUMULATIVE DAMAGE ANALYSIS FOR HYDRAULIC HOSE ASSEMBLIES |
| SAE J 1754/3 : 2015 | HOSE ASSEMBLIES, HYDRAULIC, J517 100R SERIES HOSE - PART 3: PROCUREMENT AND ORDERING INFORMATION |
| SAE J 518/3 : 2015 | HYDRAULIC FLANGE CLAMPS, 2-SCREW FLANGE CONNECTION TO BE USED WITH SAE J518-1, (CODE 61) CONNECTIONS WHERE ONLY LOW PRESSURE IS REQUIRED |
| ISO 13628-4:2010 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment |
| ANSI B11.17 : 2004 : R2015 | SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES |
| ANSI B11.17 : 2004 : R2009 | SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES |
| BS 5200:1997 | Specification for dimensions of hydraulic connectors and adaptors |
| MIL-DTL-83796-18 Revision A:2010 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flange to Flange |
| MIL-DTL-52525-5 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, Straight |
| MIL-DTL-52525-2 Revision C:2008 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 45 Degree Bent Tube |
| MIL-DTL-83796-15 Revision A:2010 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flare to Flange, with Lockwire Hole |
| SAE J518_201303 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, FOUR-BOLT SPLIT FLANGE TYPE |
| 14/30318963 DC : DRAFT DEC 2014 | BS EN 61057 - LIVE WORKING - INSULATING AERIAL DEVICES FOR MOUNTING ON A CHASSIS |
| KKK-R-2800 Base Document:1993 | RAILWAY CAR SPOTTER, SELF-PROPELLED, GED OR DED |
| MIL-B-45993 Revision A:1989 | BEAD BREAKER, PNEUMATIC TIRE, PORTABLE AIR OR AIR OVER HYDRAULIC OPERATED |
| CSA B613 : 2000 : INC : UPD 2 : 2002 : R2012 | PRIVATE RESIDENCE LIFTS FOR PERSONS WITH PHYSICAL DISABILITIES |
| MIL-DTL-83796-1 Revision C:2014 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE |
| MIL-DTL-83796-5 Revision D:2014 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLANGE |
| MIL-DTL-83796-13 Base Document:2008 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flareless to Flareless, with Lockwire Hole |
| MIL-DTL-52525-3 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 Degree Bent Tube, Short Drop |
| MIL-DTL-52471-5 Revision C:2008 | HOSE, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100R2 DOUBLE-WIRE-BRAIDED REINFORCEMENT HOSE |
| KKK-E-2810 Base Document:1993 | EXCAVATOR, MULTIPURPOSE, WHEEL-UNDERCARRIDGE DIESEL-ENGINE-DRIVEN |
| MIL-HDBK-695 Revision F:2017 | RUBBER PRODUCTS: RECOMMENDED SHELF LIFE |
| MIL-DTL-52525-9 Revision C:2008 | FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT |
| MIL-DTL-83796-3 Revision C:2014 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS |
| MIL-DTL-52471-4 Revision C:2008 | Hose, Rubber, Hydraulic Pressure-Type, Type 100R1 Single-Wire-Braided Reinforcement Hose |
| MIL-DTL-83796-9 Revision C:2010 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flange to Flange |
| SAE J 846 : 2015 | CODING SYSTEMS FOR IDENTIFICATION OF FLUID CONDUCTORS AND CONNECTORS |
| CSA B355 : 2015 | LIFTS FOR PERSONS WITH PHYSICAL DISABILITIES |
| SAE J 1402 : 2017 | AUTOMOTIVE AIR BRAKE HOSE AND HOSE ASSEMBLIES |
| SAE J 1754/1 : 2017 | HOSE ASSEMBLIES, RUBBER, HYDRAULIC, STEEL WIRE REINFORCED - PART 1: PROCUREMENT DOCUMENT |
| SAE J 2545 : 2014 | TEST PROCEDURES FOR NON-SAE HYDRAULIC HOSES |
| CSA Z267 : 2000 | SAFETY CODE FOR AMUSEMENT RIDES AND DEVICES |
| EN 61057:2017 | Live working - Insulating aerial devices for mounting on a chassis |
| BS ISO 15500-17 : 2012 | ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) FUEL SYSTEM COMPONENTS - PART 17: FLEXIBLE FUEL LINE |
| I.S. EN 61057:2017 | LIVE WORKING - INSULATING AERIAL DEVICES FOR MOUNTING ON A CHASSIS |
| ISO 15500-17:2012 | Road vehicles Compressed natural gas (CNG) fuel system components Part 17: Flexible fuel line |
| SAE J 518/2 : 2017 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 2: 42 MPA (CODE 62) |
| ASTM D 8112 : 2017 | Standard Guide for Obtaining In-Service Samples of Turbine Operation Related Lubricating Fluid |
| API 7K : 2015+ERR 2:2016 | DRILLING AND WELL SERVICING EQUIPMENT |
| MIL-DTL-52525-31 Revision B:2008 | FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL |
| MIL-DTL-52525 Revision F:2008 | FITTINGS, HOSE, HYDRAULIC, REUSABLE, FIELD-ATTACHABLE AND CLAMP-HALVES, TO MATE WITH SAE-J517 TYPE HOSES, GENERAL SPECIFICATION FOR |
| 06/30125909 DC : DRAFT OCT 2006 | ISO 13628-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT |
| MIL-DTL-83796-8 Revision D:2014 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLANGE, WITH LOCKWIRE HOLE |
| SAE J 2337-2 : 2017 | CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 2: STUD END REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS |
| MIL-DTL-83796-17 Revision A:2010 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flareless to Flange, with Lockwire Hole |
| MIL-DTL-52471 Revision F:2008 | HOSE AND HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE TYPE, GENERAL SPECIFICATION FOR |
| 05/30132503 DC : DRAFT APR 2005 | BS ISO 16653-2 - MOBILE ELEVATING WORK PLATFORMS - DESIGN, CALCULATIONS, SAFETY REQUIREMENTS AND TEST METHODS RELATIVE TO SPECIAL FEATURES - PART 2: MEWPS WITH NON-CONDUCTIVE (INSULATING) COMPONENTS |
| ASAE S474 : 1996 | AGRICULTURAL EQUIPMENT - AGRICULTURAL ROTARY MOWER SAFETY |
| BS EN 61057:1994 | Aerial devices with insulating boom used for live working exceeding 1 kV a.c. |
| CSA B355S1 : 2002 | SUPPLEMENT 1 TO CSA B355 - LIFTS FOR PERSONS WITH PHYSICAL DISABILITIES |
| KKK-E-2808 Base Document:1992 | EXCAVATOR, MULTIPURPOSE, TRUCK MOUNTED, TWO CABS |
| SAE J 518/1 : 2013 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 1: 3.5 MPA TO 35 MPA (CODE 61) |
| 04/302050 DC : DRAFT JAN 2004 | ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS |
| FED-STD-807 Revision M:2005 | TRUCKS: HEAVY COMMERCIAL, 6X4 AND 6X6 19,500 TO 30,000 KG (43,000 TO 66,000 LBS) GVWR |
| MIL-DTL-52471-3 Revision C:2008 | HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100RE, FOUR-WIRE BRAIDED REINFORCEMENT OR MULTIPLE WIRE BRAIDED STEEL WIRE REINFORCED HOSE |
| CSA B613 :2000 | PRIVATE RESIDENCE LIFTS FOR PERSONS WITH PHYSICAL DISABILITIES |
| SAE ARP 1247 : 2018 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS |
| API SPEC 16C : 2015 | CHOKE AND KILL EQUIPMENT |
| SAE J 343 : 2017 | TEST AND TEST PROCEDURES FOR SAE 100R SERIES HYDRAULIC HOSE AND HOSE ASSEMBLIES |
| API 17F REDLINE : 2006 | SPECIFICATION FOR SUBSEA PRODUCTION CONTROL SYSTEMS |
| SAE J 1212 : 2015 | FIRE PREVENTION ON FORESTRY MACHINERY |
| API 17O : 2014 | SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS) |
| SAE J 2045 : 2012 | PERFORMANCE REQUIREMENTS FOR FUEL SYSTEM TUBING ASSEMBLIES |
| API 17D REDLINE : 2011 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
| SAE J 2631 : 2011 | DEFINING HYDRAULIC OIL COMPATIBILITY WITH HYDRAULIC HOSE ELASTOMERS |
| IEC 61057:2017 | Live working - Insulating aerial devices for mounting on a chassis |
| ASME A17.1-2016/CSA B44-16 | Safety code for elevators and escalators (Bi-national standard, with ASME A17.1) |
| 13/30276640 DC : 0 | BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY |
| BS EN 62282-4-101:2014 | Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks |
| IEC 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| ISO 13628-6:2006 | Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems |
| BS EN ISO 13628-6:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea production control systems |
| EN ISO 13628-6:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems (ISO 13628-6:2006) |
| SAE J516_201604 | HYDRAULIC HOSE FITTINGS |
| MIL-DTL-52525-45 Base Document:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREES BENT TUBE |
| 12/30250727 DC | BS EN ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS |
| MIL-DTL-52525-8 Revision C:2008 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 DegreeBent Tube, Long Drop |
| 16/30343640 DC : 0 | BS ISO 12619-14 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 14: FLEXIBLE FUEL LINE |
| MIL-DTL-52525-7 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degrees Flare Female Swivel, 90 Degrees Bent Tube, Short Drop |
| MIL-DTL-15303 Revision R:2016 | AUDIBLE SIGNALS: ALARMS, BELLS, BUZZERS, HORNS, AND SIRENS, ELECTRONIC, SHIPBOARD |
| MIL-DTL-52525-14 Revision C:2008 | FITTINGS, HOSE CRIMP TYPE, SPLIT-FLANGE 45 DEGREES BENT |
| MIL-DTL-83796-12 Base Document:2008 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS |
| MIL-DTL-52525-12 Revision D:2011 | Fittings, Hose, Screw on to Split-Flange 90 Degree Bent |
| MIL-DTL-52525-33 Revision A:2008 | FITTINGS, WIRE REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES: FIELD ATTACHABLE (REUSABLE), SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, FOR USE WITH TYPE 100RE FOUR-SPRIAL-WRAP REINFORCEMENT HOSE |
| 10/30197492 DC : 0 | BS ISO 15500-17 - ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) FUEL SYSTEM COMPONENTS - PART 17: FLEXIBLE FUEL LINE |
| SAE J 232 : 2014 | INDUSTRIAL ROTARY MOWERS |
| MIL-DTL-52525-4 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 Degree Bent Tube, Long Drop |
| MIL-DTL-83796-2 Revision C:2014 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE, WITH LOCKWIRE HOLE |
| MIL-DTL-52471-9 Revision B:2008 | Hose, Rubber: Hydraulic Pressure-Type; Type 100R12 Four-Spiral-Wrap Reinforcement Hose |
| CSA C225 : 2010 : INC : UPD 1 : 2011 | VEHICLE-MOUNTED AERIAL DEVICES |
| CSA C225 : 2010 : R2015 | VEHICLE-MOUNTED AERIAL DEVICES |
| SAE AS 4775 : 2017 | AIRCRAFT MAINTENANCE JACKS - GENERAL REQUIREMENTS |
| CSA C225: 2010 | VEHICLE-MOUNTED AERIAL DEVICES |
| BS ISO 1436:2017 | Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types for oil-based or water-based fluids. Specification |
| SAE J 2593 : 2015 | INFORMATION REPORT FOR THE INSTALLATION OF FLUID CONDUCTORS AND CONNECTORS |
| API 7K : 2015 | DRILLING AND WELL SERVICING EQUIPMENT |
| ISO 1436:2017 | Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types for oil-based or water-based fluids Specification |
| BS EN ISO 13628-4:1999 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea wellhead and tree equipment |
| EN 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| ASME PASE : 2014 | SAFETY STANDARD FOR PORTABLE AUTOMOTIVE SERVICE EQUIPMENT |
| ASME A18.1 : 2017 | SAFETY STANDARD FOR PLATFORM LIFTS AND STAIRWAY CHAIRLIFTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.