SAE J2357_201211
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Application Guidelines for Electronically Driven and/or Controlled Exterior Automotive Lighting Equipment
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-11-2012
Publisher
Superseded date
03-05-2025
Superseded by
€133.00
Excluding VAT
1. SCOPE
2. REFERENCES
3. DEFINITIONS
4. LIGHTING CODES, AND MARKINGS
5. TESTS
6. REQUIREMENTS
7. NOTES
Specifies a guide toward standard practice and is subject to change to keep pace with experience and technical advances.
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This SAE Recommended Practice is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. This document establishes performance requirements, design requirements and design guidelines for electronic devices.
| SAE J2009_202212 | Discharge Forward Lighting System and Subsystems |
| SAE J2009_202208 | Discharge Forward Lighting System and Subsystems |
| SAE J2139_201412 | Tests for Signal and Marking Devices Used on Vehicles 2032 mm or More in Overall Width |
| SAE J3069_201606 | Adaptive Driving Beam |
| SAE J1623_201502 | Off-Highway Vehicle Headlamps |
| SAE J2650_201305 | Performance Requirements for Light Emitting Diode (LED) Road Illumination Devices |
| SAE J3014_201303 | Highly Accelerated Failure Test (HAFT) for Automotive Lamps with LED Assembly |
| SAE USCAR27 | SPECIFICATION FOR TESTING GAS DISCHARGE LIGHT SOURCE SUBSYSTEM |
| SAE J2282_201102 | Distributed Lighting Systems (DLS) |
| SAE USCAR33 | SPECIFICATION FOR TESTING AUTOMOTIVE LED MODULES |
| SAE J2009_201608 | Discharge Forward Lighting System and Subsystems |
| SAE J2650_201305 | Performance Requirements for Light Emitting Diode (LED) Road Illumination Devices |
| CISPR 16-1-1:2015 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus |
| ISO 11452-10:2009 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 10: Immunity to conducted disturbances in the extended audio frequency range |
| ISO 11452-4:2011 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 4: Harness excitation methods |
| SAE J1113/13_201502 | Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 13: Immunity to Electrostatic Discharge |
| ISO 7637-2:2011 | Road vehicles — Electrical disturbances from conduction and coupling — Part 2: Electrical transient conduction along supply lines only |
| SAE J1211_201211 | Handbook for Robustness Validation of Automotive Electrical/Electronic Modules |
| SAE J1113/12_200608 | Electrical Interference by Conduction and Coupling—Capacitive and Inductive Coupling via Lines Other than Supply Lines |
| ISO 10605:2008 | Road vehicles — Test methods for electrical disturbances from electrostatic discharge |
| SAE J1113/21_201305 | Electronmagnetic Compatibility Measurement Procedure for Vehicle Components - Part 21: Immunity to Electromagnetic Fields, 30 MHz to 18 GHz, Absorber-Lined Chamber |
| SAE J1113/27_201206 | Electromagnetic Compatibility Measurements Procedure for Vehicle Components - Part 27 - Immunity to Radiated Electromagnetic Fields - Mode Stir Reverberation Method |
| SAE J1889_201503 | L.E.D. Signal and Marking Lighting Devices |
| SAE J2139_201412 | Tests for Signal and Marking Devices Used on Vehicles 2032 mm or More in Overall Width |
| SAE J1113/4_201404 | Immunity to Radiated Electromagnetic Fields - Bulk Current Injection (BCI) Method |
| SAE J1113/11_201201 | Immunity to Conducted Transients on Power Leads |
| SAE J1113/41_200609 | Limits and Methods of Measurement of Radio Disturbance Characteristics of Components and Modules for the Protection of Receivers Used On Board Vehicles |
| CISPR 25:2016 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers |
| SAE J1455_201703 | Recommended Environmental Practices for Electronic Equipment Design in Heavy-Duty Vehicle Applications |
| SAE J1113/1_201310 | Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles, Boats (up to 15 m), and Machines (Except Aircraft) (16.6 Hz to 18 GHz) |
| SAE J1843_200905 | Accelerator Pedal Position Sensor for Use with Electronic Controls in Medium- and Heavy-Duty Vehicle Applications—Truck and Bus |
| SAE J1812_201306 | Function Performance Status Classification for EMC Immunity Testing |
| SAE J1113/26_201404 | Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Immunity to AC Power Line Electric Fields |
| ISO 11452-2:2004 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 2: Absorber-lined shielded enclosure |
| ISO 11452-1:2015 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 1: General principles and terminology |
| SAE J575_201508 | Test Methods and Equipment for Lighting Devices for Use on Vehicles Less than 2032 mm in Overall Width |
| SAE J1690_199608 | FLASHERS |
| SAE J387_201404 | Terminology - Motor Vehicle Lighting |
| SAE J1383_201005 | Performance Requirements for Motor Vehicle Headlamps |
| ISO 11452-8:2015 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 8: Immunity to magnetic fields |
| ISO 11452-5:2002 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 5: Stripline |
| CFR 49(PTS400-599) : 0 | TRANSPORTATION |
| SAE J2009_201608 | Discharge Forward Lighting System and Subsystems |
| ISO 11452-11:2010 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 11: Reverberation chamber |
| ISO 11452-7:2003 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 7: Direct radio frequency (RF) power injection |
| IEC 60801-2:1991 | Electromagnetic compatibility for industrial-process measurement and control equipment - Part 2: Electrostatic discharge requirements |
| ISO 11451-1:2015 | Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 1: General principles and terminology |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.