SAE J2642_201707
Current
Current
The latest, up-to-date edition.
Recommended Practice for Developing Specifications for Automotive Thermoplastic Materials
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
12-07-2017
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 Scope
2 References
3 Testing and Conditioning
4 Lot-Release Properties and Test Methods
5 Certifiable Properties and Test methods
6 Initial Characterization Properties and Test Methods
7 Special purpose characterization of Automotive Materials
8 Applicable Tests
This SAE Recommended Practice is intended to establish uniform procedures for developing specifications for automotive thermoplastics.
| DevelopmentNote |
Supersedes SAE J 1685. (03/2006)
|
| DocumentType |
Standard
|
| Pages |
15
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
This SAE Recommended Practice is intended to establish uniform procedures for developing specifications for automotive thermoplastics. It is intended for use by automotive companies and their suppliers of molded and/ or fabricated parts from thermoplastic materials.
| ISO 75-1:2013 | Plastics Determination of temperature of deflection under load Part 1: General test method |
| ISO 7391-2:2006 | Plastics Polycarbonate (PC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 3451-3:1984 | Plastics — Determination of ash — Part 3: Unplasticized cellulose acetate |
| ISO 3451-2:1998 | Plastics Determination of ash Part 2: Poly(alkylene terephthalate) materials |
| SAE J1885_200503 | Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Water Cooled Xenon-Arc Apparatus |
| ISO 3451-1:2008 | Plastics Determination of ash Part 1: General methods |
| SAE J578_201603 | Color Specification |
| ISO 293:2004 | Plastics — Compression moulding of test specimens of thermoplastic materials |
| ISO 3167:2014 | Plastics Multipurpose test specimens |
| ISO 974:2000 | Plastics Determination of the brittleness temperature by impact |
| SAE J1976_201204 | Outdoor Weathering of Exterior Materials |
| ISO 1873-2:2007 | Plastics Polypropylene (PP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 294-3:2002 | Plastics Injection moulding of test specimens of thermoplastic materials Part 3: Small plates |
| ASTM D 4673 : 2016 : REDLINE | Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials |
| ISO 11469:2016 | Plastics — Generic identification and marking of plastics products |
| ISO 11359-1:2014 | Plastics — Thermomechanical analysis (TMA) — Part 1: General principles |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| ISO 11359-2:1999 | Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature |
| SAE J1960_200410 | Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Water-Cooled Xenon Arc Apparatus |
| ISO 75-2:2013 | Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
| ASTM D 4349 : 2016 : REDLINE | Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| ISO 11357-3:2011 | Plastics Differential scanning calorimetry (DSC) Part 3: Determination of temperature and enthalpy of melting and crystallization |
| ISO 1874-2:2012 | Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 489:1999 | Plastics Determination of refractive index |
| ISO 3795:1989 | Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials |
| SAE J1344_201703 | Marking of Plastic Parts |
| ISO 7792-2:2012 | Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 294-4:2001 | Plastics Injection moulding of test specimens of thermoplastic materials Part 4: Determination of moulding shrinkage |
| ISO 180:2000 | Plastics Determination of Izod impact strength |
| ASTM D 1003 : 2013 : REDLINE | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
| ISO 1872-2:2007 | Plastics Polyethylene (PE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| SAE J1756_200608 | Determination of the Fogging Characteristics of Interior Automotive Materials |
| ISO 1183-3:1999 | Plastics Methods for determining the density of non-cellular plastics Part 3: Gas pyknometer method |
| ISO 11358:1997 | Plastics Thermogravimetry (TG) of polymers General principles |
| ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
| ISO 3451-5:2002 | Plastics — Determination of ash — Part 5: Poly(vinyl chloride) |
| ISO 306:2013 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
| ISO 294-1:2017 | Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens |
| ISO 105-A02:1993 | Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour |
| ISO 11403-1:2014 | Plastics Acquisition and presentation of comparable multipoint data Part 1: Mechanical properties |
| SAE J576_201002 | Plastic Material or Materials for Use in Optical Parts Such as Lenses and Reflex Reflectors of Motor Vehicle Lighting Devices |
| ISO 11357-1:2016 | Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles |
| ISO 178:2010 | Plastics Determination of flexural properties |
| ISO 8257-2:2001 | Plastics Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 3451-4:1998 | Plastics — Determination of ash — Part 4: Polyamides |
| ISO 1133:2005 | Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
| ISO 9988-2:2006 | Plastics Polyoxymethylene (POM) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
| ASTM D 1693 : 2015 : REDLINE | Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.