TT-P-664 Revision D:1988
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
PRIMER, COATING, ALKYD, CORROSION INHIBITING, LEAD AND CHROMATE FREE, VOC COMPLIANT
Available format(s)
PDF
Superseded date
06-01-2000
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.Covers requirements for quick drying, high solids alkyd primer for pretreated ferrous and non ferrous metals. Contains no more than 420 grams per liter of volatile organic compounds.
| Committee |
FSC 8010
|
| DevelopmentNote |
D Notice 2 & 3 both state that the document is cancelled and future procurements should refer to SSPC-Paint 25. (14/8/00) Supersedes TT P 001385. (09/2004)
|
| DocumentType |
Standard
|
| Pages |
23
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| Supersedes |
| DOD-C-24529 Base Document:1976 | CHARGERS, BATTERY, LIFT TRUCK AND PALLET TRANSPORTER BATTERY SERVICE (METRIC) |
| MIL-A-52679 Revision B:1983 | ANCHOR, SURFACING MEMBRANE: 12 INCH |
| MIL-B-12745 Revision A:1973 | BRIDGE ERECTION SET, FIXED BRIDGE, BASIC SET, FOR BRIDGES, STEEL, RAILWAY |
| MIL-E-16400 Revision H:1987 | ELECTRONIC, INTERIOR COMMUNICATIONS AND NAVIGATION EQUIPMENT, NAVAL SHIP AND SHORE, GENERAL SPECIFICATION FOR |
| A-A-3067 Base Document:1996 | PAINT: ALKYD, EXTERIOR, LOW VOC |
| MIL-A-516 Revision J:1981 | AUGER, EARTH, SKIDMOUNTED; AND AUGER, EARTH, TURNTABLE BASE MOUNTED, POWER DRIVEN |
| MIL-S-196 Revision D:1988 | SUPPORT ITEMS, ACCESSORIES, AND KITS, MECHANICAL; PACKAGING OF |
| MIL A 23798 : C | AIR CONDITIONER, FAN-COIL ASSEMBLY |
| PPP-G-2919 Base Document:1997 | GENERATOR SETS, MOBILE ELECTRIC POWER AND SUPPLEMENTAL EQUIPMENT; PACKAGING OF |
| MIL-T-45309 Revision E:1983 | TANK, COMBAT, FULL TRACKED, 105 MM GUN, M60, M60A1, M601A (RISE) & M60A3 PROCESSING FOR SHIPMENT & STORAGE OF |
| MIL-STD-193 Revision L:1991 | PAINTING PROCEDURES AND MARKING FOR VEHICLES, CONSTRUCTION EQUIPMENT, MATERIAL HANDLING EQUIPMENT, AND SPARE PARTS |
| MIL-C-28794 Base Document:1973 | Cabinet, Electronic Equipment (Single Bay) (No S/S Document) |
| MIL B 11352 : G | BLOCK, VISION, BULLET RESISTANT (METRIC) |
| MIL-E-17555 Revision H:1984 | ELECTRONIC AND ELECTRICAL EQUIPMENT, ACCESSORIES, AND PROVISIONED ITEMS (REPAIR PARTS); PACKAGING OF |
| MIL-R-24159 Revision A:1983 | RECEPTACLE, CANISTER, CO 2 ABSORBENT |
| MIL R 3593 : D | REFRIGERATION AND COOLING EQUIPMENT [EXCLUDING HOUSEHOLD REFRIGERATORS] PACKAGING OF |
| MIL-A-29247 Base Document:1986 | AUGER, EARTH, TRUCK-MOUNTED, 4 BY 4, DIESEL ENGINE DRIVEN, 28,000 LB MINIMUM GVW, WITH POLE SETTER AND WIRE REEL |
| MIL-E-46096 Revision C:1973 | ENAMEL, LUSTRELESS, QUICK DRYING, STYRENATED ALKYD TYPE, SOLAR HEAT REFLECTING |
| MIL-W-19882 Revision A:1960 | WINCHES, DRUM, POWER OPERATED, BATHYTHERMOGRAPH |
| AWWA C503 : 2014 | WET-BARREL FIRE HYDRANTS |
| MIL-C-10933 Revision E:1985 | CHILLED WATER UNITS, BAKERY |
| MIL-C-14370 Revision D:1977 | COMPRESSOR, RECIPROCATING, POWER-DRIVEN, OPEN-TYPE, FOR USE WITH REFRIGERANT-12 |
| MIL M 29212 : B NOTICE 1 | MIXING PLANT, ASPHALT, DRUM TYPE, PORTABLE, ELECTRIC MOTOR DRIVEN, 120 TONS PER HOUR CAPACITY |
| MIL-DTL-1716 Revision J:1997 | POLE, TENT, TELESCOPIC, ADJUSTABLE 5 FEET TO 9 FEET, MAGNESIUM |
| MIL-B-43866 Revision C:1986 | BREAD-SLICING MACHINE, ELECTRIC-OPERATED, MULTIPLE KNIFE |
| MIL A 24775 : 0 | AIR CONDITIONING FAN COIL UNITS, HORIZONTAL AND VERTICAL TYPES, NAVAL SHIPBOARD |
| TT-E-527 Revision D:1988 | ENAMEL, ALKYD, LUSTERLESS, LOW VOC CONTENT |
| MIL-C-13962 Revision B:1966 | CRUSHING, SCREENING, AND WASHING PLANTS, DIESEL-ENGINE AND ELECTRIC-MOTOR DRIVEN, 225-TONS PER HOUR |
| MIL-STD-726 Revision H:1985 | PACKAGING REQUIREMENTS CODE |
| MIL-B-18670 Revision A:1976 | BOX, SMALL ARMS AMMUNITION, MARK 1 MOD 0 |
| W-B-411 Revision A:1961 | BLASTING MACHINE, GALVANOMETER, BLASTING, RESISTOR ASSEMBLY |
| MIL-I-983 Revision E:1966 | INTERIOR COMMUNICATION EQUIPMENT, NAVAL SHIPBOARD, BASIC DESIGN REQUIREMENTS FOR |
| MIL-STD-1516 Revision B:1990 | UNIFIED CODE FOR COATINGS AND FINISHES FOR DOD MATERIAL |
| MIL-B-12570 Revision D:1977 | BAKERY OVEN, TRAILER MOUNTED, M-533 |
| MIL-T-62050 Revision B:1985 | TANK, COMBAT, FULL TRACKED, 105MM, GUN, M48A5, PROCESSING FOR STORAGE AND SHIPMENT OF |
| TT-E-489 Revision J:1994 | ENAMEL, ALKYD, GLOSS, (FOR EXTERIOR AND INTERIOR SURFACES) |
| MIL-T-704 Revision K:1992 | Treatment and Painting of Material |
| MIL-P-10603 Revision E:1990 | PUMP AND PUMPING UNITS, CENTRIFUGAL, POWER-DRIVEN FOR WATER PACKAGING OF |
| PPP-C-96 Revision E:1992 | CAN, METAL, 28 GAGE AND LIGHTER |
| MIL-B-45022 Revision F:1992 | BLAST CLEANING CABINETS |
| MIL-HDBK-772 Base Document:1981 | MILITARY PACKAGING ENGINEERING |
| MIL-B-2316 Revision E:1992 | BAKERY EQUIPMENT, INCLUDING UNITS ASSEMBLIES REPAIR PARTS AND TOOLS, PREPARATION FOR DELIVERY OF |
| MIL-B-26793 Revision B:1958 | BLOWER, GASOLINE ENGINE DRIVEN, TYPE A-1 |
| MIL-A-26107 Revision D:1960 | AIR CONDITIONER, TRAILER-MOUNTED, FREON CYCLE, 11-1/2 TON REFRIGERATING CAPACITY, TYPE MA-3 |
| MIL S 24412 : NOTICE 1 | STEEL, SPECIAL STRUCTURAL SHAPE, WELDABLE, HIGH TENSILE (HT), FOR SUBMARINE HULLS |
| MIL-STD-1303 Revision B:1975 | PAINTING OF NAVAL ORDNANCE EQUIPMENT |
| MIL C 19836 : B | COOLER, FLUID, INDUSTRIAL, AIR MOTOR AND GENERATOR, NAVAL SHIPBOARD |
| MIL-C-13522 Revision C:1966 | CRUSHER, JAW, ROCK, AIRBORNE, 15-TPH CAPACITY |
| MIL W 18445 : D | WINDOWS, NON-ICING, LAMINATED FLAT GLASS, ELECTRICALLY HEATED, WITH CONTROLS |
| MIL-STD-1223 Revision AC:1991 | NONTACTICAL WHEELED VEHICLES TREATMENT, PAINTING, IDENTIFICATION MARKING AND DATA PLATE STANDARDS' |
| MIL L 3976 : D | LIGHTS, MARKER, CLEARANCE (SERVICE & BLACKOUT) |
| MIL-B-233 Revision D:1987 | BOXES, SUPPLY SUPPORT ITEMS, STOWAGE AND STORAGE |
| MIL-P-18948 Revision B:1992 | PROJECTILE, PAINTING, MARKING AND GREASING (BY PROJECTILE MANUFACTURERS) |
| MIL-STD-162 Revision E:1980 | MATERIALS HANDLING EQUIPMENT PREPARATION FOR SHIPMENT, STORAGE, CYCLIC MAINTENANCE ROUTINE TESTING AND PROCESS |
| MIL-HDBK-1223 Base Document:1998 | NONTACTICAL WHEELED VEHICLES TREATMENT, PAINTING, IDENTIFICATION MARKING AND DATA PLATE STANDARDS |
| MIL-B-10122 Revision E:1991 | BARGE, LIQUID CARGO: NONPROPELLED, STEEL, OFFSHORE, 4,160-BARREL, 120-FOOT, DESIGN 231C |
| MIL R 196 : C | REPAIR PARTS, ACCESSORIES, AND KITS, MECHANICAL, PACKAGING OF |
| MIL-C-3580 Revision E:1991 | CRANES AND CRANE SHOVELS, TRUCK, CRAWLER, AND WHEEL MOUNTED FULL REVOLVING AND THEIR ATTACHMENTS, PACKAGING OF |
| GGG-L-795 Revision E:1990 | LUBRICATING UNIT, POWER OPERATED, AND PUMPING UNITS, PRESSURE LUBRICATING, DRUM MOUNTING |
| MIL-C-3600 Revision E:1991 | COMPRESSOR, AIR AND GAS [EXCEPT OXYGEN] PACKAGING OF |
| MIL-S-51173 Revision A:1964 | SERVICE UNIT, FLAME THROWER, TRUCK MOUNTED, M4A2 |
| MIL-B-3630 Revision D:1983 | BATCHING PLANT, AGGREGATE MOBILE, THREE-COMPARTMENT, 60-TON CAPACITY |
| TT-E-515 Revision A:1971 | ENAMEL, ALKYD, LUSTERLESS, QUICK-DRYING |
| MIL-B-43177 Revision B:1977 | BALING PRESSES |
| MIL-R-24358 Base Document:1968 | RESTORATION SHIPBOARD ELECTRONIC EQUIPMENT F, 1N AND 2N COGNIZANCE |
| MIL-G-762 Revision E:1990 | GRADER, ROAD, PACKAGING OF |
| MIL-R-8573 Revision A:1957 | RESERVOIRS, AIR, NONSHATTERABLE STEEL |
| MIL-B-45081 Revision E:1991 | BLAST CLEANING MACHINE: SELF-CONTAINED TUMBLE TYPE, WITH DUST COLLECTOR |
| MIL-B-3180 Revision E:1990 | BOILERS AND RELATED EQUIPMENT; PACKAGING OF |
| MIL-R-12323 Revision G:1992 | REFRIGERATOR AND RELATED EQUIPMENT, PACKAGING AND PACKING OF |
| MIL-L-51050 Revision B:1971 | LABORATORY, PETROLEUM,SEMITRAILER MOUNTED |
| MIL-W-52624 Revision B:1989 | WATER PURIFICATION UNIT & WATER PURIFICATION EQUIPMENT SET, 600GPH PACKAGING OF |
| DOD-P-28682 Base Document:1987 | CONCRETE PLANT, MOBILE, SEMITRAILER MOUNTED, 6 CUBIC METERS BULK MATERIAL CAPACITY (METRIC) |
| MIL-S-12651 Revision F:1983 | SPRAYER, PACKAGING OF |
| MIL-G-28554 Revision C:1988 | GENERATOR SET, MOBILE ELECTRIC POWER AND SUPPLEMENTAL EQUIPMENT, PACKAGING OF |
| MIL-M-18058 Revision G:1990 | MACHINERY, METAL & WOODWORKING PACKAGING OF |
| TT-E-529 Revision G:1988 | ENAMEL, ALKYD, SEMIGLOSS, LOW VOC CONTENT |
| PPP-B-2920 Base Document:1997 | BOILERS AND RELATED EQUIPMENT, PACKAGING OF |
| MIL-D-771 Revision E:1990 | DISTRIBUTOR, BITUMEN AND WATER, PACKAGING OF |
| MIL-I-2925 Revision B:1967 | INDICATOR, CARBON DIOXIDE, CHEMICAL ABSORPTION TYPE, PORTABLE |
| MIL-T-3351 Revision E:1990 | TRACTOR, FULL TRACKED, LOW SPEED, TRACTOR WHEELED, AGRICULTURAL AND TRACTOR WHEELED, INDUSTRIAL AND THEIR ATTACHMENTS, PACKAGING OF |
| MIL-D-3209 Revision C:1973 | DISTILLATION UNITS, WATER, THERMOCOMPRESSION TYPE, PACKAGING OF |
| MIL C 24275 : 0 | CABLE REELS, ACOUSTIC, COMPLETE WITH HYDRAULIC MOTOR AND CONTROLS (FOR NAVAL SHIPBOARD USE) |
| MIL C 11090 : F (1) | CLEANING COMPOUND, DEGREASING AND DEPRESERVING SOLVENT, SELF-EMULSIFYING |
| MIL-F-38762 Base Document:1966 | FLUORESCENT PENETRANT INSPECTION UNITS |
| MIL-H-81324 Base Document:1966 | HONING MACHINE, DRY PORTABLE |
| MIL-C-43460 Revision B:1979 | COATING, LUSTERLESS, FOR HELMETS AND LINERS' |
| MIL F 18953 : B | FAN, VANEAXIAL AND TUBEAXIAL, FIXED AND PORTABLE, VENTILATION, NAVAL SHIPBOARD |
| KKK-A-2809 Base Document:1986 | AUGER, EARTH, TRUCK MOUNTED, 4 BY 4, DIESEL ENGINE DRIVEN, 28,000 LB MINIMUM GVW, WITH POLE SETTER AND WIRE REEL |
| MIL F 14072 : D | FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
| MIL-P-710 Revision F:1990 | PUMP, DEEP WELL, PACKAGING OF |
| TT-T-266 Revision D:1976 | THINNER, DOPE AND LACQUER (CELLULOSE NITRATE) |
| FED-STD-313 Revision D:1996 | MATERIAL SAFETY DATA, TRANSPORTATION DATA AND DISPOSAL DATA FOR HAZARDOUS MATERIALS FURNISHED TO GOVERNMENT ACTIVITIES |
| MIL L 11195 : D | LACQUER, LUSTRELESS, HOT SPRAY |
| TT-E-489 Revision J:1994 | ENAMEL, ALKYD, GLOSS, (FOR EXTERIOR AND INTERIOR SURFACES) |
| PPP-T-60 Revision E:1986 | TAPE, PACKAGING, WATERPROOF |
| ASTM D 610 : 2008 | Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces |
| TT-S-735 Revision A:1988 | STANDARD TEST FLUIDS, HYDROCARBON |
| ASTM D 562 : 2010 | Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer |
| MIL C 5541 : E | CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
| TT-T-306 Revision E:1993 | THINNER, SYNTHETIC RESIN, ENAMELS |
| ASTM D 1639 : 1990 : R1996 : EDT 1 | Standard Test Method for Acid Value of Organic Coating Materials (Withdrawn 2005) |
| QQ-A-250-5 Revision F:1971 | ALUMINUM ALLOY ALCLAD 2024, PLATE AND SHEET |
| FED-STD-141 Revision D:2001 | PAINT, VARNISH, LACQUER AND RELATED MATERIALS, METHODS OF INSPECTION, SAMPLING AND TESTING |
| TT-C-490 Revision F:2013 | CHEMICAL CONVERSION COATINGS AND PRETREATMENTS FOR METALLIC SUBSTRATES (BASE FOR ORGANIC COATINGS) |
| PPP-P-1892 Base Document:1974 | PAINT, VARNISH, LACQUER AND RELATED MATERIALS, PACKAGING, PACKING, AND MARKING OF |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.