TT-S-735 Revision A:1988
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
STANDARD TEST FLUIDS, HYDROCARBON
Available format(s)
PDF
Superseded date
11-09-1998
Superseded by
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.Requirements for standard fluids used in contact testing of various materials to determine their resistance to hydrocarbon fluids.
| DevelopmentNote |
FUTURE ACQUISITION FOR THIS ITEM SHOULD REFER TO ASTM D 471
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE MA 2094 : 2015 | TEST METHODS FOR TUBE-FITTING ASSEMBLIES, METRIC |
| CCC-C-700 Revision J:1986 | CLOTH, COATED, VINYL COATED (ARTIFICIAL LEATHER) |
| MIL-V-25023 Revision B:1967 | VALVE, FUEL DRAIN, SELF-LOCKING |
| MIL C 53039 : A | COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
| DOD E 24635 : (1) | ENAMEL, GRAY, SILICONE ALKYD COPOLYMER SEMIGLOSS (FOR EXTERIOR USE) (METRIC) |
| MIL-STD-1214 Revision A:1990 | ESTERS AND METAL ORGANICS, TECHNICAL GRADE |
| TT-P-664 Revision D:1988 | PRIMER, COATING, ALKYD, CORROSION INHIBITING, LEAD AND CHROMATE FREE, VOC COMPLIANT |
| JSGS-87231 Revision A:1995 | ENGINES, AIRCRAFT, TURBINE |
| MIL T 6396 : E | TANKS, AIRCRAFT PROPULSION FLUID SYSTEM, INTERNAL REMOVABLE, NON-SELF-SEALING |
| MIL-S-7124 Revision B:1966 | SEALING COMPOUND, POLYSULFIDE, ACCELERATOR REQUIRED FOR AIRCRAFT STRUCTURES |
| SAE AMS 3695 : 2014 | ADHESIVE FILM, EPOXY-BASE, FOR HIGH DURABILITY STRUCTURAL ADHESIVE BONDING |
| MIL-S-45180 Revision D:1984 | SEALING COMPOUND,GASKET,HYDROCARBON FLUID AND WATER RESISTANT |
| L-F-475 Revision A:1965 | FLOOR COVERING VINYL, SURFACE (TILE AND ROLL), WITH BACKING |
| TT-V-119 Revision D:1973 | VARNISH, SPAR, PHENOLIC RESIN |
| MIL-S-29574 Base Document:1989 | SEALING COMPOUND, POLYTHIOETHER, FOR AIRCRAFT STRUCTURES, FUEL AND HIGH TEMPERATURE RESISTANT, FAST CURING AT AMBIENT AND LOW TEMPERATURE |
| MIL-C-46168 Revision D:1987 | COATING, ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
| MIL P 8116 : B | PUTTY, ZINC CHROMATE, GENERAL PURPOSE |
| MIL-C-8605 Revision B:1990 | CAP, PRESSURE FUEL SERVICING |
| MIL-L-46159 Revision A:1976 | LACQUER, ACRYLIC, LOW REFLECTIVE, OLIVE DRAB |
| MIL-PRF-3043 Revision C:1998 | RESIN COATING, PERMANENT, FOR ENGINE COMPONENTS AND METAL PARTS |
| MIL-C-0016809 Revision C:1969 | CASE, MEDICAL INSTRUMENT AND SUPPLY SET, NONRIGID, NO. 4 |
| MIL B 131 : H | BARRIER MATERIAL, WATER VAPOR PROOF, GREASEPROOF, FLEXIBLE HEAT SEALABLE |
| MIL H 27516 : D | HOSE AND HOSE ASSEMBLY, NON-METALLIC, SUCTION AND DISCHARGE |
| MIL H 27267 : B | HOSE TETRAFLUOROETHYLENE, HIGH TEMPERATURE, MEDIUM PRESSURE |
| MIL P 53030 : A | PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD & CHROMATE FREE |
| TT-P-1757 Revision B:1997 | PRIMER COATING, ALKYD BASE, ONE COMPONENT |
| MIL-S-85312 Base Document:1979 | SEALING COMPOUND, NONCURING, POLYSULFIDE, GROOVE INJECTION, FOR INTEGRAL FUEL TANKS |
| MIL-R-46082 Revision B:1983 | RETAINING COMPOUNDS, SINGLE COMPONENT, ANAEROBIC |
| MIL-C-47244 Revision A:1990 | COATING, ABLATIVE RESISTANT |
| TT-P-662 Revision B:1969 | PRIMER SURFACER, SANDING, LACQUER AND ENAMEL TYPE |
| MIL-H-2217 Revision D:1993 | HOSE ASSEMBLIES, WIRE REINFORCED SYNTHETIC RUBBER, SUBMARINE RESCUE CHAMBER |
| SAE AMS R 25988 : 2017 | RUBBER, FLUOROSILICONE ELASTOMER, OIL-AND-FUEL-RESISTANT, SHEETS, STRIPS, MOLDED PARTS AND EXTRUDED SHAPES |
| SAE AS 1501 : 1994 | HOSE, AIR DUCT, FLEXIBLE, NONMETALLIC, AIRCRAFT |
| MIL H 25579 : E | HOSE ASSEMBLY, TETRAFLUOROETHYLENE, HIGH TEMPERATURE MEDIUM PRESSURE, GENERAL REQUIREMENTS FOR |
| MIL-G-3036 Revision C:1978 | GROMMET, ELASTIC, HOT OIL AND COOLANT RESISTANT |
| MIL BULL 343 : A | DOCUMENTS APPLICABLE TO AIRCRAFT ENGINES AND PROPELLERS, USE OF |
| MIL-N-52110 Revision F:1982 | NOZZLE, FUEL & OIL SERVICING, NONAUTOMATIC SHUTOFF & NOZZLES, FUEL SERVICING AUTOMATIC SHUTOFF |
| SAEITC TSC47-012_04 | POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES (WIRE REINFORCED) FOR MEDIUM AND HIGH PRESSURE FLUID SYSTEMS IN AIRCRAFT |
| MIL-S-82496 Revision A:1977 | SCREWS, MACHINE, SELF SEALING, INTEGRAL O-RING |
| MIL-S-8802 Revision F:1990 | SEALING COMPOUND, TEMPERATURE-RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES, HIGH ADHESION |
| MIL-C-83231 Revision A:1981 | COATING, POLYURETHANE, RAIN EROSION RESISTANT FOR EXTERIOR AIRCRAFT AND MISSILE PLASTIC PARTS |
| MIL-S-4383 Revision C:1986 | SEALING COMPOUND, TOPCOAT, FUEL TANK, BUNA-N TYPE |
| SAE MA 620 : 2015 | HOSE ASSEMBLIES, CONVOLUTED POLYTETRAFLUOROETHYLENE METALLIC REINFORCED, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT METRIC |
| MIL C 3702 : B | CABLE, POWER, ELECTRICAL, IGNITION, HIGH TENSION |
| MIL P 53022 : B | PRIMER, EPOXY COATING, CORROSION INHIBITING, LEAD & CHROMATE FREE |
| SAE AS 1969 : 2013 | COUPLING ASSEMBLY, SELF-HEALING, QUICK DISCONNECT FUEL AND OIL SYSTEM COMPONENTS |
| MIL-E-52929 Base Document:1977 | ENAMEL, ALKYD, CAMOUFLAGE, FLASH DRY |
| MIL A 9117 : D | ADHESIVE, SEALING, FOR AROMATIC FUEL CELLS AND GENERAL REPAIR |
| MIL S 8516 : F | SEALING COMPOUND, POLYSULFIDE RUBBER, ELECTRIC CONNECTORS AND ELECTRICAL SYSTEMS CHEMICALLY CURED |
| MIL-P-38336 Revision A:1994 | PRIMER COATING, INORGANIC, ZINC DUST PIGMENTED, SELF-CURING, FOR STEEL SURFACES |
| MIL-C-83445 Revision A:1980 | COATING SYSTEM, POLYURETHANE, NON-YELLOWING WHITE, RAIN EROSION RESISTANT, THERMALLY REFLECTIVE |
| MIL-I-17563 Revision C:1992 | IMPREGNANTS FOR ALUMINUM, COPPER, IRON, MAGNESIUM AND ZINC ALLOY CASTINGS |
| DOD-P-24555 Base Document:1977 | PAINT, ALUMINUM, HEAT-RESISTING (650 DEGREE C), LOW-EMISSIVITY (0.40 OR LESS) (METRIC) |
| MIL P 52995 : 0 | PRIMER COATING, SYNTHETIC, CORROSION INHIBITING, LACQUER RESISTING, LEAD AND CHROMATE FREE |
| TT-E-506 Revision K:1977 | ENAMEL, ALKYD, GLOSS, TINTS AND WHITE (FOR INTERIOR USE) |
| MIL V 7899 : C | VALVE, CHECK, AIRCRAFT FUEL SYSTEM |
| MIL-H-4495 Revision D:1985 | HOSE ASSEMBLY, RUBBER, AERIAL REFUELING |
| MIL-C-15104 Revision F:1991 | Cloth, Coated, Flame Resistant, Berth and Bedding Cover (No S/S Document) |
| MIL B 22019 : C | BARRIER MATERIALS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE CORROSION INHIBITOR TREATED |
| MIL H 6615 : E | HOSE ASSEMBLIES, RUBBER, FUEL AND WATER, WITH DETACHABLE COUPLINGS, LOW TEMPERATURE |
| MIL-P-52192 Revision B:1971 | PRIMER COATING, EPOXY |
| TT-P-636 Revision D:1971 | PRIMER COATING, ALKYD, WOOD AND FERROUS METAL |
| MIL C 46081 : A | COATING COMPOUND, THERMAL INSULATING (INTUMESCENT) |
| MIL-HDBK-692 Revision B:1983 | A Guide to the Selection of Rubber O-Rings |
| MIL E 46117 : A | |
| MIL L 46171 : NOTICE 1 | LACQUER, LUSTRELESS, HOT SPRAY FOR TIP IDENTIFICATION OF AMMUNITION (FOR PROCUREMENT USE MIL-L-1195) |
| MIL-R-9208 Revision B:1968 | REPAIR MATERIAL, FOR SELF SEALING FUEL TANKS |
| MIL H 5593 : C | HOSE, AIRCRAFT, LOW-PRESSURE, FLEXIBLE |
| MIL-PRF-26915 Revision D:1997 | PRIMER COATING, FOR STEEL SURFACES |
| MIL I 25017 : E | INHIBITOR, CORROSION/LUBRICITY IMPROVER, FUEL SOLUBLE (METRIC) |
| MIL-I-3158 Revision D:1968 | INSULATION TAPE, ELECTRICAL GLASS FIBER [RESIN FILLED] AND CORD, FIBROUS GLASS |
| MIL-C-38373 Revision B:1975 | CAP, FLUID TANK FILLER |
| MIL-C-83019 Base Document:1968 | COATING, POLYURETHANE, FOR PROTECTION OF INTEGRAL FUEL TANK SEALING COMPOUND |
| MIL L 11195 : D | LACQUER, LUSTRELESS, HOT SPRAY |
| MIL P 26915 : C | PRIMER COATING, ZINC DUST PIGMENTED, FOR STEEL SURFACES |
| MIL-C-29475 Base Document:1994 | COATING, WATER BORNE POLYURETHANE CAMOUFLAGE |
| SAE AS 8796 : 2013 | HOSE, AIR DUCT, FLEXIBLE, AIRCRAFT |
| MIL-C-83982 Base Document:1974 | COMPOUND, SEALING, FLUID RESISTANT |
| MIL-S-8710 Revision B:1969 | STRAINER, AIRFRAME FUEL SYSTEM, GENERAL SPECIFICATION FOR |
| MIL-P-53032 Base Document:1983 | PRIMER COATING, WATER REDUCIBLE, EPOXY ESTER LATEX TYPE, LEAD AND CHROMATE FREE |
| MIL-C-27725 Revision B:1969 | COATING, CORROSION PREVENTIVE, FOR AIRCRAFT INTEGRAL FUEL TANKS |
| TT-E-485 Revision F:1968 | ENAMEL, SEMI-GLOSS, RUST-INHIBITING |
| MIL P 46093 : A | PRIMER COATING, SYNTHETIC (FOR BRAKE DRUMS) |
| MIL-P-22332 Revision B:1972 | PAINT, PRIMING, EXTERIOR AND INTERIOR (FOR AMMUNITION) |
| TT P 659 : C | PRIMER COATING & SURFACER SYNTHETIC, TINTS & WHITE, (FOR METAL & WOOD SURFACE) |
| ZZ-H-466 Revision C:1968 | HOSE ASSEMBLY, METAL (RUBBER COVERED), HYDROCARBON CONVEYING |
| MIL-V-8610 Revision B:1984 | VALVE, FUEL SHUTOFF SOLENOID OPERATED, 28 VOLT, DC |
| L-T-100 Revision B:1988 | TAPE, PRESSURE-SENSITIVE ADHESIVE, POLYESTER FILM |
| MIL H 6000 : B | HOSE, RUBBER [FUEL, OIL, COOLANT, WATER AND ALCOHOL] |
| MIL P 19834 : B | PLATE, IDENTIFICATION, METAL FOIL, ADHESIVE BACKED |
| MIL-PRF-8516 Revision G:1997 | SEALING COMPOUND, SYNTHETIC RUBBER, ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS, CHEMICALLY CURED |
| MIL C 25516 : D | CONNECTOR, ELECTRICAL, MINIATURE, COAXIAL, ENVIRONMENT RESISTANT TYPE, GENERAL SPECIFICATION FOR |
| MIL-B-81820 Revision F:1994 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW SPEED OSCILLATION, GENERAL SPECIFICATION FOR |
| MIL-B-8942 Revision A:1965 | Bearings, Plain, TFE Lined, Self-Aligning |
| MIL H 8794 : D | HOSE, RUBBER, HYDRAULIC, FUEL AND OIL RESISTANT |
| MIL C 46127 : A | COATING, GRAY, UNDERCOAT (SOLAR HEAT REFLECTING) |
| MIL-E-52835 Revision A:1977 | ENAMEL, MODIFIED ALKYD, CAMOUFLAGE, LUSTERLESS |
| MIL C 22263 : B | COUPLING FUEL LINE, FLEXIBLE, 125 PSI, GENERAL SPECIFICATION FOR |
| MIL L 52909 : NOTICE 1 | LACQUER, ACRYLIC, CAMOUFLAGE, LUSTERLESS |
| MIL W 5846 : C | WIRE, ELECTRICAL, CHROMEL AND ALUMEL, THERMOCOUPLE |
| SAE ARP 1616 : 2017 | SELF-SEALING BREAKAWAY VALVES FOR CRASH-RESISTANT AIRCRAFT FUEL AND OIL SYSTEMS |
| MIL-R-7575 Revision C:1966 | Resin, Polyester, Low-Pressure Laminating |
| MIL F 87260 : 0 | FOAM MATERIAL, EXPLOSION SUPPRESSION, INHERENTLY ELECTRICALLY CONDUCTIVE, FOR AIRCRAFT FUEL TANK & DRY BAY AREAS |
| MIL E 46136 : A | ENAMEL, SEMI-GLOSS, ALKYD, SOLAR HEAT REFLECTING, OLIVE DRAB |
| MIL-P-52905 Revision A:1994 | PAINT, CAMOUFLAGE, REMOVABLE |
| BS ISO 8829-2:2006 | Aerospace. Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies Non-metallic braid |
| TT-E-515 Revision A:1971 | ENAMEL, ALKYD, LUSTERLESS, QUICK-DRYING |
| GGG-H-33 Revision B:1996 | HAMMER, HAND AND MALLET, SURFACE, PROTECTIVE, HOLDER AND ADAPTER, INSERTED HAMMER FACE, AND FACES, HAMMER, INSERTED |
| MIL-S-83315 Base Document:1971 | SEALING COMPOUND, ALUMINUM STRUCTURE, PRESSURE AND WEATHER SEALING, LOW DENSITY |
| MIL L 46142 : 0 | LACQUER, LUSTRELESS, SOLAR HEAT REFLECTING |
| MIL-I-7444 Revision D:1984 | INSULATION SLEEVING, ELECTRICAL FLEXIBLE |
| MIL-B-24911 Base Document:1983 | BOOT, SAFETY, AIRCREW |
| MIL-W-5845 Revision C:1973 | WIRE, ELECTRICAL, IRON AND CONSTANTAN, THERMOCOUPLE |
| MIL C 24788 : 0 | COUPLING ASSEMBLY, SEMI-DRY-BREAK QUICK-DISCONNECT, FUEL WITH OR WITHOUT CONTINUITY SWITCH |
| MIL-P-7962 Revision D:1980 | PRIMER COATING, CELLULOSE NITRATE MODIFIED ALKYD TYPE, CORROSION INHIBITING, FAST DRYING [FOR SPRAY APPLICATION OVER PRETREATMENT COATING |
| MMM-A-134 Base Document:1970 | ADHESIVE EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING |
| MIL-P-62669 Base Document:1991 | PRIMER COATING, SYNTHETIC, VOC COMPLIANT (FOR BRAKE DRUMS) |
| ASTM D 2792 : 2017 : REDLINE | Standard Practice for Solvent and Fuel Resistance of Traffic Paint |
| MIL-H-46354 Revision A:1974 | HEADREST, OPTICAL INSTRUMENT |
| MIL-L-19538 Revision C:1970 | LACQUER, ACRYLIC NITROCELLULOSE, CAMOUFLAGE (FOR AIRCRAFT USE) |
| MIL B 22191 : D | BARRIER MATERIAL, TRANSPARENT, FLEXIBLE, HEAT SEALABLE |
| MIL H 24565 : 0 | HOSE AND FITTINGS, OIL AND TURBINE FUEL, SMOOTH BORE, CORRUGATED COVER, 7 INCH |
| MIL-C-6183 Revision B:1981 | CORK AND RUBBER COMPOSITION SHEET, FOR AROMATIC FUEL AND OIL RESISTANT GASKETS |
| MIL-A-25896 Revision E:1983 | ADAPTER, PRESSURE FUEL SERVICING, NOMINAL 2.5 INCH DIAMETER |
| MIL H 22279 : C | HOSE ASSEMBLIES, RUBBER, AIRCRAFT FUELING, COLLAPSIBLE, BY NEGATIVE PRESSURE |
| MIL-W-5908 Revision D:1973 | WIRE, ELECTRICAL, COPPER AND CONSTANTAN, THERMOCOUPLE |
| MIL-C-7488 Revision A:1974 | COOLERS, OIL, PLATE, AIRCRAFT |
| DEFSTAN 47-12/3(1978) : 1978 | SPECIFICATION FOR POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES FOR MEDIUM AND HIGH PRESSURE FLUID SYSTEMS IN AIRCRAFT. |
| TT-S-178 Revision B:1972 | SEALER, SURFACE RENEWER FOR WOOD AND SEALER FOR CONCRETE |
| MIL-S-11030 Revision F:1990 | SEALING COMPOUND, SINGLE-COMPONENT, NON-CURING, POLYSULFIDE BASE |
| MIL-L-52043 Revision C:1972 | LACQUER, SEMI GLOSS, CELLULOSE NITRATE |
| MIL-I-3190 Revision F:1991 | INSULATION SLEEVING, ELECTRICAL, FLEXIBLE, COATED, GENERAL SPECIFICATION FOR |
| ADS-13F-HDBK : 1997 | AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIR VEHICLE MATERIALS AND PROCESSES |
| MIL H 7061 : B | HOSE, RUBBER, AIRCRAFT, SELF SEALING, AROMATIC FUEL |
| MIL C 10799 : H | CLOTH, COATED, COTTON, VINYL COATED, FIRE AND MILDEW RESISTANT |
| MIL D 22706 : F | DUCT AND SCUFF COVER, PNEUMATIC, FLEXIBLE |
| MIL B 83054 : B | BAFFLE AND INERTING MATERIAL, AIRCRAFT FUEL TANK |
| MIL-S-8784 Revision B:1971 | SEALING COMPOUND, LOW ADHESION, FOR REMOVABLE PANELS AND FUEL TANK INSPECTION PLATES |
| SAE AMS R 83485 : 2014 | RUBBER, FLUOROCARBON ELASTOMER, IMPROVED PERFORMANCE AT LOW TEMPERATURES |
| SAE AMS 3267 : 1992 | SEALING COMPOUND, LOW ADHESION, CORROSION INHIBITING, FOR REMOVABLE PANELS AND FUEL TANK INSPECTION PLATES |
| ISO 8829-2:2006 | Aerospace Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies Part 2: Non-metallic braid |
| MIL-B-81934 Revision B:1991 | BEARING, SLEEVE, PLAIN AND FLANGED, SELF LUBRICATING |
| MIL-F-8615 Revision D:1976 | FUEL SYSTEM COMPONENTS, GENERAL SPECIFICATION FOR [ASG] |
| MIL P 52977 : 0 | PRIMER COATING, ALKYD, ANTICORROSIVE, LEAD AND CHROMATE FREE |
| GG-P-455 Revision B:1967 | PLATES AND FOILS, PHOTOGRAPHIC (PHOTOSENSITIVE ANODIZED ALUMINUM) |
| MIL-T-81838 Base Document:1971 | Tank, Fuel, Aircraft, Auxiliary External 300 Gallon, Type AERO-1D |
| MIL-B-21408 Revision G:1984 | BOOTS, SAFETY |
| MIL-B-8943 Revision A:1966 | BEARINGS, JOURNAL - PLAIN AND FLANGED, TFE-LINED |
| MIL H 13444 : E | HOSE & HOSE ASSEMBLIES, RUBBER: FUEL AND OIL |
| MIL-R-9300 Revision B:1968 | RESIN, EPOXY, LOW-PRESSURE LAMINATING |
| MIL-B-83277 Revision A:1975 | BOOTS, FLYERS FWU-8/P |
| MIL-N-25161 Revision C:1969 | NOZZLE, AERIAL PRESSURE REFUELING, TYPE MA-2 |
| MIL-T-23142 Revision B:1977 | TAPE, PRESSURE-SENSITIVE ADHESIVE, FOR DISSIMILAR METAL SEPARATION |
| MIL-P-8045 Revision B:1964 | PLASTIC SELF-SEALING AND NON SELF-SEALING TANK BACKING MATERIAL |
| MIL-R-83309 Base Document:1971 | REPAIR MATERIAL, NITRILE, FUEL, BLADDER, AIRCRAFT |
| MIL B 85036 : A | BARRIER MATERIAL, HEAVY DUTY, FOR FLEXIBLE ENGINE CONTAINERS |
| MIL-P-85315 Base Document:1979 | Pump, Ejector, Air Vehicle Fuel, General Specification For |
| MIL P 47115 : A | PAINT, EPOXY, ABRASION, HEAT AND CORROSION RESISTANT |
| MIL-R-83485 Base Document:1976 | RUBBER, FLUOROCARBON ELASTOMER, IMPROVED PERFORMANCE AT LOW TEMPERATURES |
| MIL-R-9299 Revision C:1968 | RESIN, PHENOLIC, LAMINATING |
| MIL-D-26124 Revision B:1977 | DUCT AND DUCT ASSEMBLY, PNEUMATIC, FLEXIBLE |
| MIL-P-5315 Revision B:1964 | PACKING, PREFORMED, HYDROCARBON FUEL RESISTANT |
| MIL B 81391 : NOTICE 1 | BAG, WATERVAPORPROOF, ONE FACE TRANSPARENT, FOR INTERIOR PACKAGING |
| MIL R 3043 : B | RESIN COATING, UNPIGMENTED FOR ENGINE COMPONENTS AND METAL PARTS |
| MIL R 25988 : B | RUBBER, FLUOROSILICONE ELASTOMER, OIL AND FUEL RESISTANT, SHEETS, STRIPS, MOLDED PARTS AND EXTRUDED SHAPES |
| MIL-C-43656 Revision A:1982 | CLOTH, COATED, POLYESTER, SILICONE RUBBER |
| MIL L 46138 : 0 | LACQUER, LUSTRELESS, ACRYLIC NITROCELLULOSE, SOLAR HEAT REFLECTING, OLIVE DRAB |
| MIL-P-20628 Revision B:1971 | PUTTY, SEALING (FOR BOLTED STEEL STORAGE TANKS) |
| DEFSTAN 47-12/4(1987) : 1987 | POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES (WIRE REINFORCED) FOR MEDIUM AND HIGH PRESSURE FLUID SYSTEMS IN AIRCRAFT |
| MIL-STD-1262 Base Document:1967 | DEGRADATION TESTS FOR FUELS AND FUEL CONTAINER COATINGS (TEST PROCEDURE) |
| SAE MA 2241 : 2015 | COUPLING ASSEMBLY, THREADLESS, FLEXIBLE, FIXED CAVITY, SELF-BONDING, METRIC |
| MIL-H-7938 Revision A:1983 | HOSE, RUBBER, FLAME-RESISTANT |
| TT-E-1593 Revision B:1974 | ENAMEL, SILICONE ALKYD COPOLYMER, GLOSS (FOR EXTERIOR AND INTERIOR USE) |
| MIL-C-53071 Base Document:1987 | COUPLING ASSEMBLIES, QUICK-DISCONNECT, SEXLESS TYPE |
| SAE MA 2079 : 2015 | HOSE ASSEMBLY, CONVOLUTED POLYTETRAFLUOROETHYLENE, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT, METRIC |
| SAE MA 2250 : 2015 | COUPLING FUEL, FLEXIBLE VARIABLE CAVITY, THREADED TYPE WITH FERRULES, METRIC |
| MIL I 27686 : F | INHIBITOR, ICING, FUEL SYSTEM |
| FED-STD-313 Revision D:1996 | MATERIAL SAFETY DATA, TRANSPORTATION DATA AND DISPOSAL DATA FOR HAZARDOUS MATERIALS FURNISHED TO GOVERNMENT ACTIVITIES |
| FED-STD-601 Base Document:1955 | RUBBER, SAMPLING AND TESTING |
| MIL-STD-290 Revision H:2013 | PACKAGING AND MARKING OF PETROLEUM AND RELATED PRODUCTS |
| MIL T 5624 : R | TURBINE FUEL, AVIATION, GRADES JP 4 AND JP 5 |
| ASTM E 260 : 1996 | Standard Practice for Packed Column Gas Chromatography |
| TT-T-548 Revision F:1991 | TOLUENE, TECHNICAL |
| FED-STD-102 Revision B:1963 | PRESERVATION, PACKAGING, AND PACKING LEVELS |
| FED-STD-791 Revision D:2007 | TESTING METHOD OF LUBRICANTS, LIQUID FUELS, AND RELATED PRODUCTS |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| MIL-STD-105 Revision E:1989 | SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES |
| ASTM D 362 : 1984 | Specification for Industrial Grade Toluene (Withdrawn 1989) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.