EN 15189:2006
|
Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods
|
EN ISO 1452-5:2010
|
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5: Fitness for purpose of the system (ISO 1452-5:2009, corrected version 2010-03-01)
|
EN ISO 6506-1:2014
|
Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
|
ISO 13846:2000
|
Plastics piping systems End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping Test method for long-term leaktightness under internal water pressure
|
ISO 6506-1:2014
|
Metallic materials Brinell hardness test Part 1: Test method
|
ISO/IEC Guide 62:1996
|
General requirements for bodies operating assessment and certification/registration of quality systems
|
EN ISO 7091 : 2000
|
PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE C
|
EN 681-1:1996/A3:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
|
ENV 1452-6 : DRAFT 2001
|
PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 6: GUIDANCE FOR INSTALLATION
|
EN 12201-4:2012
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves
|
EN ISO 6892-1:2016
|
Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
|
ISO 4016:2011
|
Hexagon head bolts Product grade C
|
EN 12201-3:2011+A1:2012
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings
|
ISO 4034:2012
|
Hexagon regular nuts (style 1) Product grade C
|
ISO 1452-1:2009
|
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride) (PVC-U) Part 1: General
|
89/106/EEC : 1988
|
COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
|
EN 805:2000
|
Water supply - Requirements for systems and components outside buildings
|
EN 45011:1998
|
General requirements for bodies operating product certification systems (ISO/IEC Guide 65:1996)
|
ISO 6892-1:2016
|
Metallic materials Tensile testing Part 1: Method of test at room temperature
|
ISO 1452-4:2009
|
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride) (PVC-U) Part 4: Valves
|
ISO 1452-3:2009
|
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride) (PVC-U) Part 3: Fittings
|
EN ISO 1167-1:2006
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006)
|
EN ISO 13846:2000
|
Plastics piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure (ISO 13846:2000)
|
EN ISO 4016:2011
|
Hexagon head bolts - Product grade C (ISO 4016:2011)
|
ISO 1452-5:2009
|
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride) (PVC-U) Part 5: Fitness for purpose of the system
|
ISO 6708:1995
|
Pipework components Definition and selection of DN (nominal size)
|
EN 10025-1:2004
|
Hot rolled products of structural steels - Part 1: General technical delivery conditions
|
EN 45011 : 1998
|
GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS
|
EN ISO 1452-4:2009
|
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves (ISO 1452-4:2009)
|
ENV 1452-7:2000
|
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformity
|
EN ISO 4034:2012/AC:2013
|
HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012/COR 1:2013)
|
EN ISO 6708:1995
|
Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995)
|
EN ISO 1452-1:2009
|
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009)
|
ISO 1452-2:2009
|
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride) (PVC-U) Part 2: Pipes
|
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015)
|
EN 12201-5:2011
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
|
ISO 7091:2000
|
Plain washers Normal series Product grade C
|
EN 1333:2006
|
Flanges and their joints - Pipework components - Definition and selection of PN
|
ISO 9001:2015
|
Quality management systems — Requirements
|
EN 12201-2:2011+A1:2013
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes
|
ISO 9000:2015
|
Quality management systems — Fundamentals and vocabulary
|
ISO/IEC Guide 65:1996
|
General requirements for bodies operating product certification systems
|
EN ISO 1452-3:2010
|
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings (ISO 1452-3:2009, corrected version 2010-03-01)
|
EN 545:2010
|
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
|
EN 12201-1:2011
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
|
EN 10310:2003
|
Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings
|
EN 1092-2:1997
|
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
|
EN 45012 : 1998
|
GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS
|
EN 14901:2014
|
Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods
|
EN 15655:2009
|
Ductile iron pipes, fittings and accessories - Internal polyurethane lining for pipes and fittings - Requirements and test methods
|
EN ISO 9000:2015
|
Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
|
EN ISO 1452-2:2009
|
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes (ISO 1452-2:2009)
|
ISO 1167-1:2006
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 1: General method
|