UNE-EN 15551:2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Railway applications - Railway rolling stock - Buffers
Amended by
Available format(s)
Hardcopy , PDF
Language(s)
Spanish, Castilian, English
Published date
18-10-2017
Publisher
Superseded date
07-02-2024
€154.80
Excluding VAT
| Committee |
CTN 25
|
| DocumentType |
Standard
|
| Pages |
85
|
| PublisherName |
Asociación Española de Normalización
|
| Status |
Superseded
|
| Standards | Relationship |
| EN 15551:2017 | Identical |
| EN 10293:2015 | Steel castings - Steel castings for general engineering uses |
| UIC 527-1 : 3ED 2005 | COACHES, VANS AND WAGONS - DIMENSIONS OF BUFFER HEADS - TRACK LAYOUT ON S-CURVES |
| ISO 6507-4:2005 | Metallic materials — Vickers hardness test — Part 4: Tables of hardness values |
| ISO 815-2:2014 | Rubber, vulcanized or thermoplastic — Determination of compression set — Part 2: At low temperatures |
| EN 10025-4:2004 | Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels |
| PN 88/H-83160 : 1988 | ABRASIVE WEAR RESISTANT CAST STEEL - GRADES |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| UIC 827-1 : 2ED 1990 | TECHNICAL SPECIFICATION FOR THE SUPPLY OF ELASTOMER COMPONENTS FOR BUFFERS |
| UIC 528 : 8ED 2007 | BUFFER GEAR FOR COACHES |
| EN 15085-1:2007+A1:2013 | Railway applications - Welding of railway vehicles and components - Part 1: General |
| ISO 148-2:2016 | Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines |
| ISO 815-1:2014 | Rubber, vulcanized or thermoplastic — Determination of compression set — Part 1: At ambient or elevated temperatures |
| ISO 6507-2:2005 | Metallic materials — Vickers hardness test — Part 2: Verification and calibration of testing machines |
| ISO 11469:2016 | Plastics — Generic identification and marking of plastics products |
| ISO 6892-1:2016 | Metallic materials — Tensile testing — Part 1: Method of test at room temperature |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| EN 15839:2012+A1:2015 | Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Freight wagons - Testing of running safety under longitudinal compressive forces |
| EN 10168:2004 | Steel products - Inspection documents - List of information and description |
| EN ISO 11469:2016 | Plastics - Generic identification and marking of plastics products (ISO 11469:2016) |
| EN 10025-1:2004 | Hot rolled products of structural steels - Part 1: General technical delivery conditions |
| UIC 526-3 : 3ED 2008 | WAGONS - BUFFERS WITH A STROKE OF 130 AND 150 MM |
| ISO 6507-3:2005 | Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| EN 15227:2008+A1:2010 | Railway applications - Crashworthiness requirements for railway vehicle bodies |
| EN 1370:2011 | Founding - Examination of surface condition |
| PREN 16839 : DRAFT 2015 | RAILWAY APPLICATIONS - ROLLING STOCK - HEAD STOCK LAYOUT |
| UIC 573 : 7ED 2007 | TECHNICAL CONDITIONS FOR THE CONSTRUCTION OF TANK WAGONS |
| ISO 148-3:2016 | Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines |
| EN 10025-5:2004 | Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| NFF 10 102 : 1998 | RAILWAY ROLLING STOCK - BUFFERS FOR FREIGHT ROLLING STOCK - ENVELOPES AND COMPONENT PARTS |
| UIC 827-2 : 3ED 1981 | TECHNICAL SPECIFICATION FOR THE SUPPLY OF STEEL RINGS FOR BUFFER SPRINGS |
| EN 1563:2011 | Founding - Spheroidal graphite cast irons |
| UIC 571-2 : 6ED 2001 | STANDARD WAGONS - ORDINARY BOGIE WAGONS - CHARACTERISTICS |
| UIC 526-1 : 3ED 2008 | WAGONS - BUFFERS WITH A STROKE OF 105 MM |
| EN 10025-6:2004+A1:2009 | Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition |
| EN ISO 148-2:2016 | Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO 148-2:2016) |
| ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
| EN ISO 148-3:2016 | Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016) |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| EN 15085-2:2007 | Railway applications - Welding of railway vehicles and components - Part 2: Quality requirements and certification of welding manufacturer |
| EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| EN 12663 : 2000 | RAILWAY APPLICATIONS - STRUCTURAL REQUIREMENTS OF RAILWAY VEHICLE BODIES |
| EN 10025-3:2004 | Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
| UIC 535-2 : 4ED 2005 | STANDARDISATION AND POSITIONING ON WAGONS OF STEPS, END PLATFORMS, GANGWAYS, HANDRAILS, TOW HOOKS, AUTOMATIC COUPLER (AC), AUTOMATIC DRAW-ON COUPLING AND BRAKE VALVE CONTROLS ON THE UIC MEMBER RUS AND OSJD MEMBER RUS |
| EN 15085-4:2007 | Railway applications - Welding of railway vehicles and components - Part 4: Production requirements |
| UIC 840-2 : 3ED 1981 | TECHNICAL SPECIFICATION FOR THE SUPPLY OF STEEL CASTINGS FOR TRACTIVE AND TRAILING STOCK |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.