|
IEC 60695-11-20:2015
|
Fire hazard testing - Part 11-20: Test flames - 500 W flame test method |
|
IEC 60112:2003+AMD1:2009 CSV
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
|
ISO 2719:2016
|
Determination of flash point — Pensky-Martens closed cup method |
|
ISO 5660-1:2015
|
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) |
|
ISO 871:2006
|
Plastics Determination of ignition temperature using a hot-air furnace |
|
IEC 60695-4:2012
|
Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products |
|
ISO 5657:1997
|
Reaction to fire tests Ignitability of building products using a radiant heat source |
|
IEC TS 62441:2011
|
Safeguards againts accidentally caused candle flame ignition for audio/video, communication and information technology equipment |
|
IEC 60099-4:2014
|
Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems |
|
EN 60695-1-10:2017
|
Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
|
CLC/TS 62441:2012
|
Safeguards against accidentally caused candle flame ignition for audio/video, communication and information technology equipment |
|
ISO 13943:2017
|
Fire safety — Vocabulary |
|
IEC 60695-1-12:2015
|
Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering |
|
IEC 60695-2-11:2014
|
Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
|
EN 60099-4:2014
|
Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems |
|
IEC 60695-2-13:2010+AMD1:2014 CSV
|
Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials |
|
EN 60587:2007
|
Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion |
|
EN 60112 : 2003 AMD 1 2009
|
METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS |
|
EN 60695-2-13:2010/A1:2014
|
FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS (IEC 60695-2-13:2010/A1:2014) |
|
IEC TS 60695-11-11:2016
|
Fire hazard testing - Part 11-11: Test flames - Determination of the characteristic heat flux for ignition from a non-contacting flame source |
|
ISO/IEC Guide 51:2014
|
Safety aspects Guidelines for their inclusion in standards |
|
IEC 60695-2-12:2010+AMD1:2014 CSV
|
Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials |
|
EN 60695-4:2012
|
FIRE HAZARD TESTING - PART 4: TERMINOLOGY CONCERNING FIRE TESTS FOR ELECTROTECHNICAL PRODUCTS (IEC 60695-4:2012) |
|
ISO 10840:2008
|
Plastics Guidance for the use of standard fire tests |
|
IEC TR 60695-1-21:2008
|
Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods |
|
IEC GUIDE 104:2010
|
The preparation of safety publications and the use of basic safety publications and group safety publications |
|
IEC 60695-11-10:2013
|
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
|
EN ISO 13943:2017
|
Fire safety - Vocabulary (ISO 13943:2017) |
|
EN 60695-1-11:2015
|
Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment |
|
EN ISO 2719:2016
|
Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
|
EN ISO 2592:2017
|
Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017) |
|
IEC 60587:2007
|
Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion |
|
IEC 60695-1-11:2014
|
Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment |
|
EN 60695-11-5:2017
|
Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
|
IEC 60695-11-5 : 2.0
|
FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE |
|
IEC 60695-11-5:2016
|
Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
|
EN 60695-2-12:2010/A1:2014
|
FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS (IEC 60695-2-12:2010/A1:2014) |
|
IEC 60695-1-10:2016
|
Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
|
EN 60695-2-11:2014
|
Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014) |
|
EN 3475-603:2011/AC:2011
|
AEROSPACE SERIES - CABLES, ELECTRICAL, AIRCRAFT USE - TEST METHODS - PART 603: RESISTANCE TO WET ARC TRACKING |