UNE-EN 617:2002
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Continuous handling equipment and systems- Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers.
Hardcopy , PDF
13-04-2011
Spanish, Castilian, English
28-06-2002
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Hazards
5 Safety and EMC requirements and/or measures
5.1 Mechanical hazards
5.2 Electrical hazards
5.3 Electromagnetic compatibility (EMC)
5.4 Thermal hazards
5.5 Hazards generated by radiation
5.6 Hazards generated by bulk materials handled and
stored in the storage equipment
5.7 Hazards generated by neglected ergonomic principles
in machine design (mismatch of machinery with human
characteristics and abilities)
5.8 Hazard combinations
5.9 Hazards caused by failure of energy supply, braking
down of machinery parts and others functional disorders
5.10 Hazards caused by (temporary) missing and/or incorrectly
positioned safety related measures/means
6 Verification of safety and EMC requirements and/or measures
6.1 General
6.2 Special verification
7 Information for use
7.1 Operating instruction - Instruction handbook
7.2 Minimum marking
Annex A (normative) List of hazards according to EN 292-1
Annex B (informative) Further Documents and Remarks
Annex C (informative) Safety signs mentioned in 7.2.3
Annex D (informative) Fire or explosion hazard
Annex ZA (informative) Relationship of this document with
EC Directives
Annex ZB (informative) Clauses of this European Standard which
address Principal Protection Requirements of the
EU Electro-magnetic compatibility Directive
89/336/EEC
Bibliography
Defines technical requirements to minimise the hazards. These hazards can arise during the operation and maintenance of equipment to store bulk materials in silos, bunkers, bins and hoppers and their built-in inlet and outlet devices when carried out in accordance with the specifications given by the manufacturer or his authorised representative.
| Committee |
CTN 58
|
| DevelopmentNote |
2002 Edition Re-Issued in April 2011 & incorporates AMD 1 2011. (04/2011)
|
| DocumentType |
Standard
|
| Pages |
48
|
| PublisherName |
Asociacion Espanola de Normalizacion
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NBN EN 617 : 2001 + A1 2011 | Identical |
| NEN EN 617 : 2001 + A1 2010 | Identical |
| BS EN 617 : 2001 | Identical |
| SN EN 617 : 2001 + A1 2011 | Identical |
| I.S. EN 617:2001 | Identical |
| NS EN 617 : 2001 + A1 2010 | Identical |
| DIN EN 617:2011-06 | Identical |
| EN 617:2001 | Identical |
| NF EN 617 : 2001 + A1 2011 | Identical |
| UNI EN 617 : 2011 | Identical |
| EN 617:2001+A1:2010 | Identical |
| EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| EN 618:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors |
| EN 12464-1:2011 | Light and lighting - Lighting of work places - Part 1: Indoor work places |
| EN 418 : 1992 | SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
| EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
| EN 620:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials |
| ISO 3435:1977 | Continuous mechanical handling equipment — Classification and symbolization of bulk materials |
| ISO 14122-3:2016 | Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
| ISO 14122-1:2016 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
| EN 60825-1:2014/AC:2017-06 | SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014) |
| EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| EN 61000-6-3:2007/A1:2011/AC:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010) |
| NFP 22 630 : 1992 XP | STEEL CONSTRUCTION - STEEL SILOS - DESIGN LOADS IN SILOS |
| IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
| ENV 1991-4 : DRAFT 95 | EUROCODE 1 - BASIS OF DESIGN AND ACTIONS ON STRUCTURES - ACTIONS IN SILOS AND TANKS |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| ENV 1991-1 : DRAFT 1994 | EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES - BASIS OF DESIGN |
| EN 811 : 1996 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS |
| EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN 547-1:1996+A1:2008 | Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| EN 574:1996+A1:2008 | Safety of machinery - Two-hand control devices - Functional aspects - Principles for design |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| ISO 6184-1:1985 | Explosion protection systems Part 1: Determination of explosion indices of combustible dusts in air |
| IEC 61000-6-3:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
| EN ISO 14122-3:2016 | Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016) |
| EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| EN 842:1996+A1:2008 | Safety of machinery - Visual danger signals - General requirements, design and testing |
| EN 547-3:1996+A1:2008 | Safety of machinery - Human body measurements - Part 3: Anthropometric data |
| EN ISO 14122-2:2016 | Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016) |
| EN 12464-2:2014 | Light and lighting - Lighting of work places - Part 2: Outdoor work places |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| IEC 61241-1-2:1999 | Electrical apparatus for use in the presence of combustible dust - Part 1-2: Electrical apparatus protected by enclosures and surface temperature limitation - Selection, installation and maintenance |
| IEC 60364-7-706:2005 | Low-voltage electrical installations - Part 7-706: Requirements for special installations or locations - Conducting locations with restricted movement |
| EN 60204-11:2000/corrigendum:2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV |
| EN 954-1 : 1996 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN 626-1:1994+A1:2008 | Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers |
| EN 26184-1 : 1991 | EXPLOSION PROTECTION SYSTEMS - DETERMINATION OF EXPLOSION INDICES OF COMBUSTIBLE DUSTS IN AIR |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| ISO 14122-2:2016 | Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
| EN 795:2012 | Personal fall protection equipment - Anchor devices |
| ISO 3864:1984 | Safety colours and safety signs |
| EN ISO 14122-1:2016 | Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016) |
| EN 741:2000+A1:2010 | Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.