UNI EN 1559-1 : 2011
Current
Current
The latest, up-to-date edition.
FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
Published date
16-06-2011
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser
5 Designations
6 Manufacture
7 Requirements
8 Inspection
9 Marking
10 Packaging and surface protection
11 Complaints
Annex A (normative) - Mandatory and/or optional information
checklist
Annex B (informative) - Significant technical changes between
this European Standard and the previous edition
Bibliography
Describes the general technical delivery conditions for castings made from cast metallic materials except copper alloy castings.
| Committee |
CT 700
|
| DevelopmentNote |
Partially supersedes UNI 3157 (06/2001) Supersedes UNI 7892. (07/2001)
|
| DocumentType |
Standard
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 1559-1:2011 | Identical |
| NEN EN 1559-1 : 2011 | Identical |
| I.S. EN 1559-1:2011 | Identical |
| EN 1559-1:2011 | Identical |
| NBN EN 1559-1 : 2011 | Identical |
| SN EN 1559-1 : 2011 | Identical |
| NF EN 1559-1 : 2011 | Identical |
| BS EN 1559-1:2011 | Identical |
| NS EN 1559-1 : 2011 | Identical |
| DIN EN 1559-1:2011-05 | Identical |
| EN 1780-1:2002 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1: Numerical designation system |
| EN ISO 8062-1:2007 | Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007) |
| EN ISO 8062-3 : 2007 COR 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
| ISO 5459:2011 | Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| EN 12680-2:2003 | Founding - Ultrasonic examination - Part 2: Steel castings for highly stressed components |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN 1559-3:2011 | Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN 12680-1:2003 | Founding - Ultrasonic examination - Part 1: Steel castings for general purposes |
| EN 1780-2:2002 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2: Chemical symbol based designation system |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN 1560:2011 | Founding - Designation system for cast iron - Material symbols and material numbers |
| EN 12890:2000 | Founding - Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores |
| ISO 8062-3:2007 | Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings |
| EN 1559-5:2017 | Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings |
| EN 1754:2015 | Magnesium and magnesium alloys - Designation system for anodes, ingots and castings - Material symbols and material numbers |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| ISO 10135:2007 | Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD) |
| EN 1559-6:1998 | Founding - Technical conditions of delivery - Part 6: Additional requirements for zinc alloy castings |
| ISO 8062-1:2007 | Geometrical product specifications (GPS) Dimensional and geometrical tolerances for moulded parts Part 1: Vocabulary |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN 1559-2:2014 | Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
| EN 1371-1:2011 | Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings |
| EN 1371-2:2015 | Founding - Liquid penetrant testing - Part 2: Investment castings |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| EN 12680-3:2011 | Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 1369:2012 | Founding - Magnetic particle testing |
| EN 12892:2000 | Founding - Equipment for the production of lost patterns for the lost foam casting process |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 12681:2003 | Founding - Radiographic examination |
| EN ISO 10135:2009 | Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007) |
| EN 12844:1998 | Zinc and zinc alloys - Castings - Specifications |
| EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
| EN 1559-4:2015 | Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings |
| EN 1982:2017 | Copper and copper alloys - Ingots and castings |
| EN 12883:2000 | Founding - Equipment for the production of lost patterns for the lost wax casting process |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.