VDI 2166 Blatt 2:2015-10
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Planning of electrical installations in buildings - Advice for electric mobility
Available format(s)
Hardcopy , PDF
Superseded date
04-09-2020
Superseded by
Language(s)
German - English
Published date
01-10-2015
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Preliminary note
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviations
5 Energetic requirements
6 Technical integration
7 Charging stations in and at buildings
8 Acceptance/commissioning
9 Operation
Annex
Bibliography
Individual mobility is changing; in addition to pure combustion vehicles, the number of electrically chargeable hybrid vehicles, electric vehicles and electrically powered or electrically assisted two-wheelers is increasing.
| DocumentType |
Standard
|
| Pages |
0
|
| PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| EN 61851-1:2011 | Electric vehicle conductive charging system - Part 1: General requirements |
| IEC 62752:2016 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
| IEC 60364-4-43:2008 | Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent |
| EN 12464-1:2011 | Light and lighting - Lighting of work places - Part 1: Indoor work places |
| VDE 0122-1 : 2012 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS (IEC 61851-1:2010) |
| DIN EN 61851-1 : 2012 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS (IEC 61851-1:2010) |
| DIN VDE 0100-534 : 2016-10 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - ISOLATION, SWITCHING AND CONTROL - CLAUSE 534: DEVICES FOR PROTECTION AGAINST TRANSIENT OVERVOLTAGES (IEC 60364-5-53:2001/A2:2015, MODIFIED) |
| VDE 0510 : 1977 | VDE SPECIFICATION FOR ELECTRIC STORAGE BATTERIES & BATTERY PLANTS |
| HD 60364-4-443:2016 | Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances - Clause 443: Protection against transient overvoltages of atmospheric origin or due to switching |
| HD 60364-4-43:2010 | Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent |
| VDI 2053 Blatt 1:2014-12 | Air conditioning - Car parks - Exhaust ventilation (VDI Ventilation Code of Practice) |
| VBG 4 : 1997 | ELECTRICAL EQUIPMENT AND OPERATING EQUIPMENT |
| IEC 62196-2:2016 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories |
| EN 61851-23:2014/AC:2016-06 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 23: DC ELECTRIC VEHICLE CHARGING STATION (IEC 61851-23:2014/COR1:2016) |
| EN 62305-4:2011/AC:2016 | PROTECTION AGAINST LIGHTNING - PART 4: ELECTRICAL AND ELECTRONIC SYSTEMS WITHIN STRUCTURES (IEC 62305-4:2010) |
| IEC 62196-3:2014 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers |
| VDE 0105-100 : 2015 AMD 1 2017 | OPERATION OF ELECTRICAL INSTALLATIONS - PART 100: GENERAL REQUIREMENTS |
| IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| VDE 0666-10 : 2017 | IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD) (IEC 62752:2016) |
| EN 61851-21:2002 | Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply |
| HD 60364-4-42 : 2011 AMD 1 2015 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-42: PROTECTION FOR SAFETY - PROTECTION AGAINST THERMAL EFFECTS (IEC 60364-4-42:2010/A1:2014) |
| VDE 0185-305-2:2013-02 | PROTECTION AGAINST LIGHTNING - PART 2: RISK MANAGEMENT (IEC 62305-2:2010) |
| DIN EN 61851-21-2 : DRAFT 2013 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21-2: EMC REQUIREMENTS FOR OFF BOARD ELECTRIC VEHICLE CHARGING SYSTEMS (IEC 69/220/CD:2012) |
| VDS 2010 : 2015 | |
| VDI 4700-1 : 2015 COR 1 2015 | Terminology of civil engineering and building services - Corrigendum concerning guideline VDI 4700 Part 1:2015-10 |
| IEC 60364-5-53:2001+AMD1:2002+AMD2:2015 CSV | Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control |
| VDE 0100-600 : 2017-06 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 6: VERIFICATION (IEC 60364-6:2016) |
| HD 60364-4-41:2017/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK |
| DIN EN 61851-21 : 2002 | ELECTRICAL EQUIPMENT OF ELECTRIC ROAD VEHICLES - ELECTRIC VEHICLES CONDUCTIVE CHARGING SYSTEM - PART 2-1: ELECTRIC VEHICLE REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN A.C./D.C. SUPPLY |
| IEC 61851-22:2001 | Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station |
| DIN VDE 0620-1 : 2016 AMD 1 2017 | PLUGS AND SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS ON FIXED SOCKET-OUTLETS |
| VDE 0100-722 : 2016 | ERRICHTEN VON NIEDERSPANNUNGSANLAGEN - TEIL 7-722: ANFORDERUNGEN FUER BETRIEBSSTAETTEN, RAEUME UND ANLAGEN BESONDERER ART - STROMVERSORGUNG VON ELEKTROFAHRZEUGEN (IEC 60364-7-722:2015, MODIFIZIERT) |
| VDE V 0660-600-7 : 2014-10 | Low-voltage switchgear and controlgear assemblies – Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicles charging stations (IEC/TS 61439-7:2014) – das Schalten zur Steuerung von Stromkreisen oder Betriebsmitteln.<br> |
| VDI 2166 Blatt 1:2017-10 | Planning of electrical installations in buildings - Fundamentals of energy controlling |
| VDI 2050 Blatt 5:2010-10 | Requirements at technical equipment rooms - Electrical engineering |
| VDE 0122-2-1 : 2002 | ELECTRICAL EQUIPMENT OF ELECTRIC ROAD VEHICLES - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - ELECTRIC VEHICLE REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN A. C./D. C. SUPPLY |
| ISO 6469-1:2009 | Electrically propelled road vehicles Safety specifications Part 1: On-board rechargeable energy storage system (RESS) |
| VDE 0100-534 : 2016-10 | Low-voltage electrical installations Part 5-53: Selection and erection of electrical equipment – Isolation, switching and control – Clause 534: Devices for protection against transient overvoltages<br> |
| DIN IEC/TS 61439-7 : 2014-10 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 7: ASSEMBLIES FOR SPECIFIC APPLICATIONS SUCH AS MARINAS, CAMPING SITES, MARKET SQUARES, ELECTRIC VEHICLES CHARGING STATIONS (IEC/TS 61439-7:2014) |
| VDI 6004 Blatt 2:2007-07 | Protection of building services - Lightning protection systems and surge protection |
| IEC 60364-7-722:2015 | Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supplies for electric vehicles |
| DIN VDE 0100-722 : 2016 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-722: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SUPPLIES FOR ELECTRIC VEHICLES (IEC 60364-7-722:2015, MODIFIED) |
| VDI 3551:2011-01 | Electromagnetic compatibility (EMC) in building services |
| VDE 0100-442 : 2013-06 | Low-voltage electrical installations Part 4-442: Protection for safety – Protection of low-voltage installations against temporary overvoltages due to earth faults in the high-voltage system and due to faults in the low voltage system (IEC 60364-4-44:2007 (Clause 442), modified); German implementation HD 60364-4-442:2012<br> |
| EN 62305-4:2011/AC:2016-11 | Protection against lightning - Part 4: Electrical and electronic systems within structures |
| IEC 62305-1:2010 | Protection against lightning - Part 1: General principles |
| HD 60364-4-442:2012 | Low-voltage electrical installations - Part 4-442: Protection for safety - Protection of low-voltage installations against temporary overvoltages due to earth faults in the high-voltage system and due to faults in the low voltage system |
| HD 60364-4-444:2010/AC:2012 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-444: PROTECTION FOR SAFETY - PROTECTION AGAINST VOLTAGE DISTURBANCES AND ELECTROMAGNETIC DISTURBANCES |
| VDE 0100-443:2016-10 | Low-voltage electrical installations - Part 4-44: Protection for safety – Protection against voltage disturbances and electromagnetic disturbances- Clause 443: Protection against transient overvoltages of atmospheric origin or due to switching (IEC 60364-4-44:2007/A1:2015, modified |
| EN 62305-3:2011 | Protection against lightning - Part 3: Physical damage to structures and life hazard |
| IEC 60364-6:2016 | Low voltage electrical installations - Part 6: Verification |
| HD 60364-5-534:2016 | Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control - Clause 534: Devices for protection against transient overvoltages |
| HD 60364-7-722:2016 | Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supplies for electric vehicles |
| VDE-AR-E 2623-2-2 : 2009 | STECKER, STECKDOSEN, FAHRZEUGSTECKVORRICHTUNGEN UND FAHRZEUGSTECKER - LADUNG VON ELEKTROFAHRZEUGEN - TEIL 2-2: ANFORDERUNGEN UND HAUPTMASSE FUER DIE AUSTAUSCHBARKEIT VON STIFT- UND BUCHSENSTECKVORRICHTUNGEN |
| VDE 0100-410 : 2007 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK |
| VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
| VDI 6004 Blatt 3:2009-05 | Protection for building services - Vandalism or destruction of property |
| VDE 0100-430 : 2010-10 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-43: PROTECTION FOR SAFETY - PROTECTION AGAINST OVERCURRENT |
| DIN IEC 61000-2-13 : DRAFT 2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-13: ENVIRONMENT - HIGH-POWER ELECTROMAGNETIC (HPEM) ENVIRONMENTS - RADIATED AND CONDUCTED |
| VDE 0620-1 : 2016 AMD 1 2017 | STECKER UND STECKDOSEN FUER DEN HAUSGEBRAUCH UND AEHNLICHE ANWENDUNGEN - TEIL 1: ALLGEMEINE ANFORDERUNGEN AN ORTSFESTE STECKDOSEN |
| DIN EN 61851-22 : 2002 | ELECTRICAL EQUIPMENT OF ELECTRIC ROAD VEHICLES - ELECTRIC VEHICLES CONDUCTIVE CHARGING SYSTEM - PART 2-2: AC ELECTRIC VEHICLE CHARGING STATION |
| DIN VDE 0100-430:2010-10 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-43: PROTECTION FOR SAFETY - PROTECTION AGAINST OVERCURRENT |
| VDE 0122-2-3 : 2014 COR 1 2016 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 23: DC ELECTRIC VEHICLE CHARGING STATION (IEC 61851-23:2014) |
| DIN EN 62305-3:2011-10 | PROTECTION AGAINST LIGHTNING - PART 3: PHYSICAL DAMAGE TO STRUCTURES AND LIFE HAZARD |
| IEC 60364-4-44:2007+AMD1:2015 CSV | Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances |
| VDE 0100-444:2010-10 | Low-voltage electrical installations Part 4-444: Protection for safety – Protection against voltage disturbances and electromagnetic disturbances |
| DIN EN 61851-23 : 2014 COR 1 2016 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 23: DC ELECTRIC VEHICLE CHARGING STATION (IEC 61851-23:2014) |
| VDE 0122-2-2 : 2002 | ELECTRICAL EQUIPMENT OF ELECTRIC ROAD VEHICLES - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - AC ELECTRIC VEHICLE CHARGING STATION |
| DIN VDE 0100-444 : 2010 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-444: PROTECTION FOR SAFETY - PROTECTION AGAINST VOLTAGE DISTURBANCES AND ELECTROMAGNETIC DISTURBANCES |
| VDI 6028 Blatt 1.1:2013-11 | Assessment criteria for Building Services - Technical quality for sustainable buildings |
| EN 62305-2:2012 | Protection against lightning - Part 2: Risk management |
| DIN VDE 0100-443:2016-10 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-44: PROTECTION FOR SAFETY - PROTECTION AGAINST VOLTAGE DISTURBANCES AND ELECTROMAGNETIC DISTURBANCES - CLAUSE 443: PROTECTION AGAINST TRANSIENT OVERVOLTAGES OF ATMOSPHERIC ORIGIN OR DUE TO SWITCHING (IEC 60364-4-44:2007/A1:2015, MODIFIED) |
| SAE J2464_200911 | Electric and Hybrid Electric Vehicle Rechargeable Energy Storage System (RESS) Safety and Abuse Testing |
| VDI 2074:2014-07 | Recycling in the building services |
| DIN EN 62305-2 : 2013-02 | PROTECTION AGAINST LIGHTNING - PART 2: RISK MANAGEMENT (IEC 62305-2:2010) |
| DIN VDE 0100-600 : 2017-06 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 6: VERIFICATION (IEC 60364-6:2016) |
| IEC 62305-4:2010 | Protection against lightning - Part 4: Electrical and electronic systems within structures |
| IEC TS 61439-7:2014 | Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicles charging stations |
| IEC 62305-2:2010 | Protection against lightning - Part 2: Risk management |
| EN 61851-22:2002 | Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station |
| IEC 60364-4-42:2010+AMD1:2014 CSV | Low-voltage electrical installations - Part 4-42: Protection forsafety - Protection against thermal effects |
| IEC 61851-21-1:2017 | Electric vehicle conductive charging system - Part 21-1 Electric vehicle on-board charger EMC requirements for conductive connection to AC/DC supply |
| IEC 61000-2-13:2005 | Electromagnetic compatibility (EMC) - Part 2-13: Environment - High-power electromagnetic (HPEM) environments - Radiated and conducted |
| IEC 62305-3:2010 | Protection against lightning - Part 3: Physical damage to structures and life hazard |
| IEC 61851-1:2017 | Electric vehicle conductive charging system - Part 1: General requirements |
| DIN VDE 0100-442 : 2013-06 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-442: PROTECTION FOR SAFETY - PROTECTION OF LOW-VOLTAGE INSTALLATIONS AGAINST TEMPORARY OVERVOLTAGES DUE TO EARTH FAULTS IN THE HIGH-VOLTAGE SYSTEM AND DUE TO FAULTS IN THE LOW VOLTAGE SYSTEM (IEC 60364-4-44:2007 (CLAUSE 442) |
| IEC 61851-21:2001 | Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c./d.c. supply |
| VDE 0839-2-13 : DRAFT 2005 | ELEKTROMAGNETISCHE VERTRAEGLICHKEIT (EMV) - TEIL 2-13: UMGEBUNGSBEDINGUNGEN - UMGEBUNGEN MIT HOHER ELEKTROMAGNETISCHER LEISTUNG (HPEM) - ABGESTRAHLT UND LEITUNGSGEFUEHRT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.