IEC 61347-2-3:2011+AMD1:2016 CSV
|
Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps |
EN 60352-2:2006/A1:2013
|
SOLDERLESS CONNECTIONS - PART 2: CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
EN 50107-1 : 2002 AMD 1 2004
|
SIGNS AND LUMINOUS-DISCHARGE-TUBE INSTALLATIONS OPERATING FROM A NO-LOAD RATED OUTPUT VOLTAGE EXCEEDING 1 KV BUT NOT EXCEEDING 10 KV - PART 1: GENERAL REQUIREMENTS |
EN 62031:2008/A2:2015
|
LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS (IEC 62031:2008/A2:2014) |
IEC 61984:2008
|
Connectors - Safety requirements and tests |
IEC 61347-2-13:2014+AMD1:2016 CSV
|
Lamp controlgear - Part 2-13: Particular requirements for d.c. ora.c. supplied electronic controlgear for LED modules |
EN 61050:1992/A1:1995
|
TRANSFORMERS FOR TUBULAR DISCHARGE LAMPS HAVING A NON LOAD OUTPUT VOLTAGE EXCEEDING 1000 V (GENERALLY CALLED NEON TRANSFORMERS - GENERAL AND SAFETY REQUIREMENTS |
EN 61347-2-13:2014/A1:2017
|
LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES |
IEC 61210:2010
|
Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements |
EN 61199:2011/A2:2015
|
SINGLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS (IEC 61199:2011/A2:2014) |
EN 62384:2006/A1:2009
|
DC OR AC SUPPLIED ELECTRONIC CONTROL GEAR FOR LED MODULES - PERFORMANCE REQUIREMENTS |
IEC 61347-1:2015 RLV
|
Lamp controlgear - Part 1: General and safety requirements |
EN 60929:2011/A1:2016
|
AC AND/OR DC-SUPPLIED ELECTRONIC CONTROL GEAR FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS |
IEC 60929:2011+AMD1:2015 CSV
|
AC and/or DC-supplied electronic control gear for tubularfluorescent lamps - Performance requirements |
IEC 62532:2011+AMD1:2016 CSV
|
Fluorescent induction lamps - Safety specifications |
IEC 62384:2006+AMD1:2009 CSV
|
DC or AC supplied electronic control gear for LED modules - Performance requirements |
EN 50143:2009
|
Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 000 V but not exceeding 10 000 V |
EN 61347-2-3:2011/A1:2017
|
LAMP CONTROL GEAR - PART 2-3: PARTICULAR REQUIREMENTS FOR A.C. AND/OR D.C. SUPPLIED ELECTRONIC CONTROL GEAR FOR FLUORESCENT LAMPS (IEC 61347-2-3:2011/A1:2016) |
IEC 61199:2011+AMD1:2012+AMD2:2014 CSV
|
Single-capped fluorescent lamps - Safety specifications |
IEC 60364-6:2016
|
Low voltage electrical installations - Part 6: Verification |
EN 60921:2004/A1:2006
|
BALLASTS FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS |
EN 62532:2011/A1:2017
|
FLUORESCENT INDUCTION LAMPS - SAFETY SPECIFICATIONS |
IEC 60921:2004+AMD1:2006 CSV
|
Ballasts for tubular fluorescent lamps - Performance requirements |
IEC 60901:1996+AMD1:1997+AMD2:2000 CSV
|
Single-capped fluorescent lamps - Performance specifications |
IEC 60838-2-2:2006+AMD1:2012 CSV
|
Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules |
EN 61347-1:2015
|
Lamp controlgear - Part 1: General and safety requirements |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
EN 61347-2-10:2001/corrigendum:2010
|
LAMP CONTROLGEAR - PART 2-10: PARTICULAR REQUIREMENTS FOR ELECTRONIC INVERTORS AND CONVERTORS FOR HIGH-FREQUENCY OPERATION OF COLD TUBULAR DISCHARGE LAMPS (NEON TUBES) (IEC 61347-2-10:2000/A1:2008) |
IEC 61347-2-2:2011
|
Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
IEC 60352-2:2006+AMD1:2013 CSV
|
Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance |
EN 60838-2-2:2006/A1:2012
|
MISCELLANEOUS LAMPHOLDERS - PART 2-2: PARTICULAR REQUIREMENTS - CONNECTORS FOR LED-MODULES (IEC 60838-2-2:2006/A1:2012) |
EN 61210:2010
|
Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements |
IEC 61535:2009+AMD1:2012 CSV
|
Installation couplers intended for permanent connection in fixedinstallations |
EN 60901:1996/A6:2017
|
SINGLE-CAPPED FLUORESCENT LAMPS - PERFORMANCE SPECIFICATIONS (IEC 60901:1996/A6:2014, MODIFIED) |
EN 61140:2016
|
Protection against electric shock - Common aspects for installation and equipment |
EN 50107-2:2005
|
Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV - Part 2: Requirements for earth-leakage and open-circuit protective devices |
EN 61984:2009
|
Connectors - Safety requirements and tests |
EN 61535:2009/A1:2013
|
INSTALLATION COUPLERS INTENDED FOR PERMANENT CONNECTION IN FIXED INSTALLATIONS (IEC 61535:2009/A1:2012) |
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
IEC 61347-2-10:2000+AMD1:2008 CSV
|
Lamp controlgear - Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) |
IEC 61140:2016
|
Protection against electric shock - Common aspects for installation and equipment |
IEC 62031:2008+AMD1:2012+AMD2:2014 CSV
|
LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS |
IEC 61347-2-8:2000+AMD1:2006 CSV
|
Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps |
EN 61195:1999/A2:2015
|
DOUBLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS (IEC 61195:1999/A2:2014) |
EN 61347-2-2:2012
|
Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
IEC 60364-5-52:2009
|
Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems |
IEC 61195:1999+AMD1:2012+AMD2:2014 CSV
|
Double-capped fluorescent lamps - Safety specifications |