03/316891 DC : DRAFT OCT 2003
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
EN 13053 - VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATINGS AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS
29-09-2006
23-11-2012
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Ratings and performance of the whole air handling unit
5.1 General
5.2 Testing of aerodynamic performance
5.3 Testing of acoustic performance
5.4 Tolerance
5.5 Test report
6 Components and sections in air-handling units
6.1 General
6.2 Casing
6.3 Fan section
6.4 Coils
6.5 Heat recovery sections
6.6 Damper sections
6.7 mixing sections
6.8 Humidifiers
6.9 Filter sections
6.10 Sound attenuation sections
7 Extended hygiene requirements for special applications
7.1 General
7.2 Accessibility
7.3 Smoothness
7.4 Inspection windows and lights
7.5 Drainage/prevention of condensation, humidifiers
7.6 Air leakage
8 Instructions for installation, operation and maintenance
8.1 Installation
8.2 Operation and maintenance
8.3 Documentation and labelling
Annex A (normative) Air handling units - heat recovery -
defrosting - requirements and testing
A.1 General
A.2 Defrosting
A.3 Testing
A.4 Test report
EN 13053
| Committee |
RHE/2
|
| DocumentType |
Draft
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| PREN 13053 : DRAFT 2017 | Identical |
| EN 1886:2007 | Ventilation for buildings - Air handling units - Mechanical performance |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| EN 305:1997 | Heat exchangers - Definitions of performance of heat exchangers and the general test procedure for establishing performance of all heat exchangers |
| ISO 9614-1:1993 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points |
| EN 12792:2003 | Ventilation for buildings - Symbols, terminology and graphical symbols |
| EN ISO 3741:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010) |
| ISO 9614-2:1996 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| EN 779:2012 | Particulate air filters for general ventilation - Determination of the filtration performance |
| EN ISO 7235:2009 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
| ISO 5801:2017 | Fans — Performance testing using standardized airways |
| ISO/TR 5168:1998 | Measurement of fluid flow Evaluation of uncertainties |
| ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
| EN ISO 3746:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
| EN 308:1997 | Heat exchangers - Test procedures for establishing performance of air to air and flue gases heat recovery devices |
| ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements |
| EN ISO 9614-2:1996 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996) |
| EN 1751:2014 | Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves |
| ISO 3741:2010 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for reverberation test rooms |
| EN 60034-2:1996/A2:1996 | ROTATING ELECTRICAL MACHINES - PART 2: METHODS FOR DETERMINING LOSSES AND EFFICIENCY OF ROTATING ELECTRICAL MACHINERY FROM TESTS (EXCLUDING MACHINES FOR TRACTION VEHICLES) |
| ISO 7235:2003 | Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss |
| ISO 5221:1984 | Air distribution and air diffusion Rules to methods of measuring air flow rate in an air handling duct |
| EN 25136 : 1993 | ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS - IN-DUCT METHOD |
| ISO 3966:2008 | Measurement of fluid flow in closed conduits Velocity area method using Pitot static tubes |
| ISO 5136:2003 | Acoustics — Determination of sound power radiated into a duct by fans and other air-moving devices — In-duct method |
| EN ISO 9614-1:2009 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
| EN 13030:2001 | Ventilation for buildings - Terminals - Performance testing of louvres subjected to simulated rain |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.