04/30055611 DC : 0
Current
Current
The latest, up-to-date edition.
BS EN 124 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS
Available format(s)
Hardcopy , PDF
Language(s)
English
Publisher
BS EN 124
Committee |
B/505
|
DocumentType |
Draft
|
Pages |
78
|
PublisherName |
British Standards Institution
|
Status |
Current
|
EN 12390-3:2009/AC:2011 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
EN ISO 62:2008 | Plastics - Determination of water absorption (ISO 62:2008) |
ENV 12633 : DRAFT 2003 | METHOD OF DETERMINATION OF UNPOLISHED AND POLISHED SLIP/SKID RESISTANCE VALUE |
EN ISO 527-4:1997 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 4: TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES |
EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
EN 59:2016 | Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester |
89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
ISO 1873-1:1995 | Plastics Polypropylene (PP) moulding and extrusion materials Part 1: Designation system and basis for specifications |
EN 63 : 1977 | GLASS REINFORCED PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES - THREE POINT METHOD |
ISO 4892:1981 | Plastics Methods of exposure to laboratory light sources |
EN 13036-4:2011 | Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test |
EN ISO 178:2010/A1:2013 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013) |
ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
EN ISO 3166-1:2014 | Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013) |
ISO 2883:1980 | Rubber, vulcanized — Antistatic and conductive products for industrial use — Electrical resistance limits |
EN ISO 6603-1 : 2000 | PLASTICS - DETERMINATION OF PUNCTURE IMPACT BEHAVIOUR OF RIGID PLASTICS - PART 1: NON-INSTRUMENTED IMPACT TESTING |
EN 287-2:1992/A1:1997 | APPROVAL TESTING OF WELDERS - FUSION WELDING - ALUMINIUM AND ALUMINIUM ALLOYS |
EN 12373-1 : 2001 | ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 1: METHOD FOR SPECIFYING DECORATIVE AND PROTECTIVE ANODIC OXIDATION COATINGS ON ALUMINIUM |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
EN 1433:2002/A1:2005 | DRAINAGE CHANNELS FOR VEHICULAR AND PEDESTRIAN AREAS - CLASSIFICATION, DESIGN AND TESTING REQUIREMENTS, MARKING AND EVALUATION OF CONFORMITY |
EN ISO 14125:1998/A1:2011 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES |
ISO 9001:2015 | Quality management systems — Requirements |
EN 1563:2011 | Founding - Spheroidal graphite cast irons |
ISO 14125:1998 | Fibre-reinforced plastic composites — Determination of flexural properties |
EN 20105-A03 : 1994 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART A03: GREY SCALE FOR ASSESSING STAINING |
EN 10130:2006 | Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions |
ISO 62:2008 | Plastics Determination of water absorption |
EN 206-1:2000/A2:2005 | CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
ISO 3166-1:2013 | Codes for the representation of names of countries and their subdivisions Part 1: Country codes |
EN 20105-A02 : 1994 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART A02: GREYSCALE FOR ASSESSING CHANGE IN COLOUR (ISO 105-A02:1993) |
EN 1386:2007 | Aluminium and aluminium alloys - Tread plate - Specifications |
EN ISO 1873-1 : 1995 | PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
EN ISO 306:2013 | Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013) |
EN 513:1999 | Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering |
EN 1253-1:2015 | GULLIES FOR BUILDINGS - PART 1: TRAPPED FLOOR GULLIES WITH A DEPTH WATER SEAL OF AT LEAST 50 MM |
EN 1561:2011 | Founding - Grey cast irons |
EN ISO 175:2010 | Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010) |
EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.