Skip to content
Please enter a keyword to search

  • 09/30175678 DC : 0

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    BS EN 14681:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES

    Available format(s):  Hardcopy, PDF

    Superseded date:  31-05-2010

    Language(s):  English

    Published date: 

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Modification to clause 2 Normative references
    2 Modification to sub-clause 5.1.5.1 Hydraulic and
       pneumatic fluid systems
    3 Modification to sub-clause 5.1.7 Ergonomic principles
    4 Modification to sub-clause 5.1.14 Loss of energy
    5 Modification to sub-clause 5.1.18 Warning devices and
       safety signs
    6 Addition of sub-clauses 5.1.19 to 5.1.21
    7 Modification to sub-clause 5.2, Table 1
    8 Modification to Clause 6 Verification of the safety
       requirements and/or measures
    9 Modification to sub-clause 7.1 General
    10 Modification to sub-clause 7.3.2 Machine/equipment
       declaration
    11 Modification to sub-clause 7.3.3 Instruction for
       transportation and assembly of the equipment
    12 Modification to sub-clause 7.3.4 Information about
       commissioning and dismantling of the equipment
    13 Modification to sub-clause 7.3.5 Operation instructions
       concerning the equipment
    14 Modification to sub-clause 7.4 Minimum marking
    15 Modifications to Annex A (normative) Noise test code
    16 Addition of Annex ZC
    17 Modification to the Bibliography

    General Product Information - (Show below) - (Hide below)

    Comment Closes On
    Committee MCE/23
    Document Type Draft
    Publisher British Standards Institution
    Status Superseded
    Superseded By

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 12096:1997 Mechanical vibration - Declaration and verification of vibration emission values
    ISO 11202:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
    EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
    EN 894-3:2000+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
    EN 12464-1:2011 Light and lighting - Lighting of work places - Part 1: Indoor work places
    EN 982:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
    ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
    EN 1037:1995+A1:2008 Safety of machinery - Prevention of unexpected start-up
    ISO 14122-3:2016 Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
    EN 14253:2003+A1:2007 Mechanical vibration - Measurement and calculation of occupational exposure to whole-body vibration with reference to health - Practical guidance
    ISO 14122-1:2016 Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access
    EN 1088:1995+A2:2008 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
    IEC 61310-2:2007 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
    EN 981:1996+A1:2008 Safety of machinery - System of auditory and visual danger and information signals
    ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
    EN 894-2:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
    EN 61310-2:2008 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
    EN 60079-0:2012/A11:2013 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
    ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
    EN 614-2:2000+A1:2008 Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks
    EN ISO 14121-1:2007 Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007)
    EN 1837:1999+A1:2009 Safety of machinery - Integral lighting of machines
    EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
    EN 1299:1997+A1:2008 Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation
    IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
    EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
    IEC 60204-11:2000 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
    EN ISO 7731:2008 Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)
    EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
    EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
    ISO 14122-4:2016 Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders
    ISO 14121-1:2007 Safety of machinery Risk assessment Part 1: Principles
    ISO 7731:2003 Ergonomics Danger signals for public and work areas Auditory danger signals
    EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
    EN 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
    IEC 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
    EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
    EN ISO 14122-3:2016 Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016)
    EN 842:1996+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing
    EN 60519-4:2013 SAFETY IN ELECTROHEATING INSTALLATIONS - PART 4: PARTICULAR REQUIREMENTS FOR ARC FURNACE INSTALLATIONS (IEC 60519-4:2013)
    EN ISO 14122-4:2016 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016)
    EN ISO 14122-2:2016 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016)
    IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
    ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
    ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
    EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
    EN ISO 6682:2008 Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989)
    ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
    EN 60204-11:2000/corrigendum:2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV
    EN 12198-3:2002+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening
    EN 983:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
    ISO 11064-1:2000 Ergonomic design of control centres Part 1: Principles for the design of control centres
    ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
    EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
    ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
    EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
    IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
    EN 50171 : 2001 COR 2001 CENTRAL POWER SUPPLY SYSTEMS
    EN ISO 11064-1:2000 Ergonomic design of control centres - Part 1: Principles for the design of control centres (ISO 11064-1:2000)
    EN 13463-5:2011 Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c'
    ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
    ISO 14122-2:2016 Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
    EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
    EN ISO 14122-1:2016 Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016)
    ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
    EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
    EN ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
    IEC 60519-4:2013 Safety in electroheating installations - Part 4: Particular requirements for arc furnace installations
    EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
    EN 894-1:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective