|
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV
|
Information technology equipment - Safety - Part 1: General requirements |
|
IEC 60364-5-54:2011
|
Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors |
|
IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV
|
Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) |
|
IEC 61000-6-4:2006+AMD1:2010 CSV
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
|
IEC 61158-2:2014
|
Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition |
|
IEC 61169-8:2007
|
Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 Ω (type BNC) |
|
IEC 61984:2008
|
Connectors - Safety requirements and tests |
|
IEC 60807-3:1990
|
Rectangular connectors for frequencies below 3 MHz - Part 3: Detail specification for a range of connectors with trapezoidal shaped metal shells and round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/rear extraction |
|
IEC 61784-1:2014
|
Industrial communication networks - Profiles - Part 1: Fieldbus profiles |
|
EN 50174-1:2009/A2:2014
|
INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: INSTALLATION SPECIFICATION AND QUALITY ASSURANCE |
|
IEC 60670-1:2015
|
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements |
|
ISO/IEC 9314-4:1999
|
Information technology Fibre Distributed Data Interface (FDDI) Part 4: Single Mode Fibre Physical Layer Medium Dependent (SMF-PMD) |
|
IEC 60364-4-41:2005+AMD1:2017 CSV
|
Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
|
IEEE 802-2014 REDLINE
|
IEEE Standard for Local and Metropolitan Area Networks: Overview and Architecture |
|
IEC 61754-22:2005
|
Fibre optic connector interfaces - Part 22: Type F-SMA connector family |
|
IEC 62439:2008
|
High availability automation networks |
|
ISO/IEC 24702:2006
|
Information technology Generic cabling Industrial premises |
|
IEC TR 61158-1:2010
|
Industrial communication networks - Fieldbus specifications - Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series |
|
IEC 61076-3-117:2009
|
Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface - Variant 14 related to IEC 61076-3-106 - Push-pull coupling |
|
ISO/IEC 8802-3:2000
|
Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications |
|
IEC TR 61000-5-2:1997
|
Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling |
|
IEC 60757:1983
|
Code for designation of colours |
|
IEC 60364-1:2005
|
Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions |
|
ISO/IEC TR 14763-2:2000
|
Information technology Implementation and operation of customer premises cabling Part 2: Planning and installation of copper cabling |
|
IEC 61754-2:1996
|
Fibre optic connector interfaces - Part 2: Type BFOC/2,5 connector family |
|
ISO/IEC TR 29106:2007
|
Information technology Generic cabling Introduction to the MICE environmental classification |
|
IEC 60079-11:2011
|
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
|
IEC 60950-21:2002
|
Information technology equipment - Safety - Part 21: Remote power feeding |
|
IEC 60079-27:2008
|
Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) |
|
ISO/IEC 18010:2002
|
Information technology Pathways and spaces for customer premises cabling |
|
ISO/IEC 14763-1:1999
|
Information technology Implementation and operation of customer premises cabling Part 1: Administration |
|
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
|
IEC 61076-3-106:2006
|
Connectors for electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface |
|
IEC 60364-4-44:2007+AMD1:2015 CSV
|
Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances |
|
IEC GUIDE 104:2010
|
The preparation of safety publications and the use of basic safety publications and group safety publications |
|
IEC 61935-1:2015
|
Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in ISO/IEC 11801 and related standards |
|
IEC 60079-14:2013
|
Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
|
ISO/IEC 9314-3:1990
|
Information processing systems Fibre distributed Data Interface (FDDI) Part 3: Physical Layer Medium Dependent (PMD) |
|
IEC 61754-24:2009
|
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24: Type SC-RJ connector family |
|
IEC 61131-2:2017
|
Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests |
|
IEC 61076-2-101:2012
|
Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking |
|
IEC 60060-1:2010
|
High-voltage test techniques - Part 1: General definitions and test requirements |
|
IEC 61754-20:2012
|
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 20: Type LC connector family |
|
ISO/IEC 14763-3:2014
|
Information technology Implementation and operation of customer premises cabling Part 3: Testing of optical fibre cabling |
|
IEC 61754-4:2013
|
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4: Type SC connector family |
|
IEC 61010-1:2010+AMD1:2016 CSV
|
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
|
IEC 60364-4-42:2010+AMD1:2014 CSV
|
Low-voltage electrical installations - Part 4-42: Protection forsafety - Protection against thermal effects |
|
IEC 61000-6-2 : 3.0:2016
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS |
|
IEC 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
|
EN 50310:2016
|
Telecommunications bonding networks for buildings and other structures |
|
IEC 61784-3:2016+AMD1:2017 CSV
|
Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions |
|
IEC 61784-2:2014
|
Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 |