ISO 6507-1:2005
|
Metallic materials Vickers hardness test Part 1: Test method
|
BS 7448-1:1991
|
Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of metallic materials
|
ISO 898-2:2012
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
|
API 2A WSD : 2014
|
PLANNING, DESIGNING, AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - WORKING STRESS DESIGN
|
ISO 4287:1997
|
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
|
EN 1591-1:2013
|
Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation
|
ISO 13628-1:2005
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations
|
ISO/TR 9769:1991
|
Steel and iron Review of available methods of analysis
|
ISO 13628-2:2006
|
Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications
|
ASME PV CODE 9 : 2017
|
BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS
|
ISO 9712:2012
|
Non-destructive testing Qualification and certification of NDT personnel
|
API TR 6AF2 : 2013
|
TECHNICAL REPORT ON CAPABILITIES OF API INTEGRAL FLANGES UNDER COMBINATION OF LOADING - PHASE 2
|
ASME PV CODE 8 DIV 1 : 2017
|
BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1
|
ISO 4885:2017
|
Ferrous materials Heat treatments Vocabulary
|
ISO 6892:1998
|
Metallic materials Tensile testing at ambient temperature
|
ASME PCC 1 : 2013
|
GUIDELINES FOR PRESSURE BOUNDARY BOLTED FLANGE JOINT ASSEMBLY
|
ISO 783:1999
|
Metallic materials Tensile testing at elevated temperature
|
ISO 9606-1:2012
|
Qualification testing of welders — Fusion welding — Part 1: Steels
|
ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
|
ISO 15579:2000
|
Metallic materials Tensile testing at low temperature
|
BS 7201-1:1989
|
Hydraulic fluid power. Gas loaded accumulators Specification for seamless steel accumulator bodies above 0.5 L water capacity
|
ISO 15156-2:2015
|
Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
|
API 2RD : 2013
|
DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS
|
ISO 13535:2000
|
Petroleum and natural gas industries Drilling and production equipment Hoisting equipment
|
ISO 15156-3:2015
|
Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
|
API SPEC 16C : 2015
|
CHOKE AND KILL EQUIPMENT
|
MSS SP 25 : 2013
|
STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS
|
API 6J : 1992
|
BULLETIN ON TESTING OF OILFIELD ELASTOMERS - A TUTORIAL
|
ISO 14693:2003
|
Petroleum and natural gas industries — Drilling and well-servicing equipment
|
ISO 148:1983
|
Steel — Charpy impact test (V-notch)
|
API RP 16Q : 2017
|
DESIGN, SELECTION, OPERATION, AND MAINTENANCE OF MARINE DRILLING RISER SYSTEMS
|
ISO 2566-1:1984
|
Steel Conversion of elongation values Part 1: Carbon and low alloy steels
|
API 7 : 2001
|
SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS
|
ISO 10474:2013
|
Steel and steel products — Inspection documents
|
API RP 17B : 2014
|
RECOMMENDED PRACTICE FOR FLEXIBLE PIPE
|
ISO 13533:2001
|
Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment
|
EN 1591-2:2008
|
Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters
|
ISO 15156-1:2015
|
Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials
|
ISO 13628-6:2006
|
Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems
|
ISO 13628-4:2010
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment
|
BS 7201-2:1995
|
Hydraulic fluid power. Gas loaded accumulators Dimensions of gas ports
|
ISO 10423:2009
|
Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment
|
BS 7448-2:1997
|
Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of welds in metallic materials
|
ISO 10432:2004
|
Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment
|
SAE AS 4059F : 2013
|
AEROSPACE FLUID POWER - CONTAMINATION CLASSIFICATION FOR HYDRAULIC FLUIDS
|
ISO 9327-1:1999
|
Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 1: General requirements
|
API 6AF : 2008
|
TECHNICAL REPORT ON CAPABILITIES OF API FLANGES UNDER COMBINATIONS OF LOAD
|
API 579-1 : 2016
|
FITNESS-FOR-SERVICE
|
ISO 13628-5:2009
|
Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals
|
ISO 10945:1994
|
Hydraulic fluid power Gas-loaded accumulators Dimensions of gas ports
|
EN 1418:1997
|
Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
|
ISO 377:2017
|
Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
|
ISO 9000-1:1994
|
Quality management and quality assurance standards — Part 1: Guidelines for selection and use
|
ISO 11960:2014
|
Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells
|
ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
|
EN 287-1:2011
|
Qualification test of welders - Fusion welding - Part 1: Steels
|