• Shopping Cart
    There are no items in your cart

AS 2030.1-1999

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases Cylinders for compressed gases other than acetylene

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

25-07-2024

Published date

05-04-1999

€77.79
Excluding VAT

Specifies requirements for the usage of cylinders for compressed gases other than acetylene exceeding 0.1 kg, but not exceeding 3000 kg water capacity. This edition deletes any reference to approvals of cylinder design by State and Territorial regulatory authorities and deletes previous references to acceptable other National Standards by expanding the maufacturing requirements. The Standard introduces a design approval scheme referring to third party verification.

Committee
ME-002
DocumentType
Standard
ISBN
0 7337 2574 0
Pages
32
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

This Standard specifies requirements for the verification, filling, handling, inspection, testing, and maintenance of refillable gas cylinders for the storage and transport of compressed gases, where the cylinders exceed 0.1 kg but do not exceed 3000 kg water capacity, other than acetylene cylinders, non-refillable cylinders and vacuum-insulated cylinders. This Standard does not apply to cylinders forming part of aircraft equipment and used solely in aircraft other than as a reference made in a direction pursuant to the Civil Aviation Regulations.The requirements specified for gas cylinders in fire extinguisher systems and fire extinguishers, apply only where suitable requirements are not given in another Australian Standard.NOTES:1 AS 2030.2 sets out requirements for acceptance, filling, inspection and care of refillable gas cylinders for the storage of compressed acetylene dissolved in a solvent, where the cylinder water capacity exceeds 5 kg.2 AS 2030.3 sets out requirements for the approval and initial filling of non-refillable gas cylinders.3 AS 2030.4 sets out requirements for vacuum-insulated cylinders.

First published as part of AS CB4-1931.
Redated 1943.
Second edition 1950.
Redated 1952.
Redated 1955.
Third edition 1963.
Fourth edition 1967.
Fifth edition 1969.
Revised and redesignated AS 2030-1977.
Revised and redesignated in part as AS 2030.1-1985.
Second edition 1989.
Third edition 1999.

AS 2337.3-2006 Gas cylinder test stations Transportable gas cylinders - Periodic inspection and testing of composite gas cylinders (ISO 11623:2002, MOD) (Reconfirmed 2017)
AS 3848.1-1999 Filling of portable gas cylinders Decant filling of medical air and oxygen into portable cylinders - Safe procedures
AS 3635-1990 Unified (ISO inch) screw threads, associated gauges, and gauging practice (Reconfirmed 2017)
MP 48-2007 Certificated gas cylinder test stations
AS 2337.3-1998 Gas cylinder test stations Inspection and testing of fibre reinforced plastics (FRP) gas cylinders
AS 4484-2004
AS 2473-1996 Valves for compressed gas cylinders (threaded outlet)
AS 2613-1989 Safety devices for gas cylinders
AS 2030.3-1982 The verification, filling, inspection, testing and maintenance of cylinders for the storage and transport of compressed gases - Non-refillable cylinders for compressed gases
AS/NZS 1596:2002 The storage and handling of LP Gas
AS 2337.2-1990 Gas cylinder test stations LP gas fuel vessels for automotive use
AS 2473-1990 Valves for compressed gas cylinders (threaded outlet)
AS 2472-1996 Valves for medical gas cylinders (Including pin-indexed outlet)
AS 2030.2-1996 The verification, filling, inspection, testing and maintenance of cylinders for the storage and transport of compressed gases Cylinders for dissolved acetylene
AS 3848.2-1999 Filling of portable gas cylinders Filling of portable cylinders for self-contained underwater breathing apparatus (SCUBA) and non-underwater self-contained breathing apparatus (SCBA) - Safe procedures
AS 1674.1-1997 Safety in welding and allied processes Fire precautions (Reconfirmed 2016)
AS 2337.1-1999 Gas cylinder test stations General requirements, inspections and tests - Gas cylinders
AS 2337.1-2004 Gas cylinder test stations General requirements, inspection and tests - Gas cylinders
AS 2337.2-2004 Gas cylinder test stations LP Gas fuel vessels for automotive use (Reconfirmed 2016)
AS/NZS 1677.1:1998 Refrigerating systems Refrigerant classification
AS/NZS 1596:1997 Storage and handling of LP Gas
AS 2613-2005 Safety devices for gas cylinders (Reconfirmed 2016)
AS 2474-1990 Valves for compressed gas cylinders (diameter-indexed outlets)
AS 2030.4-1985 The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases Welded cylinders - Insulated
AS 4484-1997 Industrial, medical and refrigerant compressed gas cylinder identification
AS 1674-1980 Fire precautions in cutting, heating and welding operations
AS 2472-1985 Valves for medical gas cylinders

AS 2299-1992 Occupational diving
AS/NZS 2299.1:1999 Occupational diving operations Standard operational practice
AS/NZS 1596:2002 The storage and handling of LP Gas
AS 2470-2005 Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11 kg to 150 kg (Reconfirmed 2016)
AS 2815.1-2008 Training and certification of occupational divers Occupational SCUBA diver - Standard
AS 2896-1991 Medical gas systems - Installation and testing of non-flammable medical gas pipeline systems
AS 2470-1995 Steel cylinders for compressed gases - Welded - 11 kg to 150 kg
AS 2896-1998 Medical gas systems - Installation and testing of non-flammable medical gas pipeline systems
AS 1470-1986 Health and safety at work - Principles and practices
AS 3840.1-1998 Pressure regulators for use with medical gases Pressure regulators and pressure regulators with flow-metering devices (Reconfirmed 2016)
AS 2337.3-1998 Gas cylinder test stations Inspection and testing of fibre reinforced plastics (FRP) gas cylinders
AS 2473.3-2007 Valves for compressed gas cylinders Outlet connections for medical gases (including pin-indexed yoke connections) (Reconfirmed 2017)
AS 5601-2004 Gas installations
AS/NZS 1841.1:2007 Portable fire extinguishers General requirements (Reconfirmed 2021)
AS/NZS 2299.4:2005 Occupational diving operations Film and photographic diving
AS 2337.1-2004 Gas cylinder test stations General requirements, inspection and tests - Gas cylinders
AS/NZS 2243.1:1997 Safety in laboratories General
AS 2030.4-1985 The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases Welded cylinders - Insulated
AS 1841.1-1992 General requirements
AS 4005.4-2000 Training and certification of recreational divers - SCUBA instructor
AS 2815.1-1992 Training and certification of occupational divers - SCUBA diving to 30 m
AS 2809.1-2008 Road tank vehicles for dangerous goods General requirements for all road tank vehicles
AS 1843-1976 Foam (chemical) type portable fire extinguishers
AS 2815.2-1992 Training and certification of occupational divers - Air diving to 30 m
AS 2469-1998 Steel cylinders for compressed gases - Welded two-piece construction - 0.1 kg to 35 kg
AS/NZS 1200:2000 Pressure equipment
AS 2809.1-1999 Road tank vehicles for dangerous goods - General requirements
AS 3200-1986 Approval and test specification - Electromedical equipment - General requirements
AS 4037-1992 Boilers and pressure vessels - Examination and testing
AS 2613-2005 Safety devices for gas cylinders (Reconfirmed 2016)
AS 4214.6-1998 Gaseous fire extinguishing systems - FE-13 (HFC-23) total flooding systems
AS 4005.3-2000 Training and certification of recreational divers - Assistant SCUBA instructor
AS/NZS 1716:1994 Respiratory protective devices
AS 2473.1-2006 Valves for compressed gas cylinders Specifications, type testing, and manufacturing tests and inspections (Reconfirmed 2017)
AS/NZS 2299.1:2007 Occupational diving operations Standard operational practice
AS 2473.2-2007 Valves for compressed gas cylinders - Outlet connections (threaded) and stem (inlet) threads
AS 4211.3-1996 Gas recovery or combined recovery and recycling equipment Fluorocarbon refrigerants from commercial/domestic refrigeration and airconditioning systems
AS 4484-1997 Industrial, medical and refrigerant compressed gas cylinder identification
AS 3689.1-1989 Automatic fire extinguishing systems using halogenated hydrocarbons Halon 1301 total flooding systems
AS/NZS 1716:2003 Respiratory protective devices
AS/NZS 1425:1999 LP Gas fuel systems for vehicle engines
AS 3577-1999 Steel cylinders for compressed gases - Welded - 150 kg to 500 kg
AS 4214.2-1995 Gaseous fire extinguishing systems Inergen (IG-541) total flooding systems
AS/NZS 4757:2002 Handling and destruction of drugs
AS 4587-1999 Water mist fire protection systems - System design, installation and commissioning
AS 2658-2003 LP Gas - Portable and mobile appliances
AS 1715-1991 Selection, use and maintenance of respiratory protective devices
HB 40.3-1997 The Australian Refrigeration and Airconditioning Code of Good Practice Reduction of emissions of fluorocarbons in domestic refrigeration applications
AS 2658-2008 LP Gas - Portable and mobile appliances
AS 2527-1997 Cylinders for dissolved acetylene
AS/NZS 1715:1994 Selection, use and maintenance of respiratory protective devices
AS 1777-2005 Aluminium cylinders for compressed gases - Seamless - 0.1 kg to 130 kg
AS 1851.12-1995 Maintenance of fire protection equipment - Gaseous fire extinguishing systems
AS 4005.2-2000 Training and certification of recreational divers Recreational SCUBA dive supervisor
AS 2815.3-1992 Training and certification of occupational divers Air diving to 50 m
AS/NZS 2022:2003 Anhydrous ammonia - Storage and handling (Reconfirmed 2023)
AS 1851.11-1991 Maintenance of fire protection equipment - Halon 1301 total flooding systems
AS/NZS 2299.2:2002 Occupational diving operations Scientific diving
AS 3772-1990 Fire protection of cooking areas
AS 3577-2006 Steel cylinders for compressed gases - Welded - 150 kg to 500 kg
AS 1840-1976 Water type portable fire extinguishers - Water (soda acid) type
AS 2030.2-1996 The verification, filling, inspection, testing and maintenance of cylinders for the storage and transport of compressed gases Cylinders for dissolved acetylene
AS 4005.5-2000 Training and certification of recreational divers - SCUBA instructor trainer
AS 4214.5-1995 Gaseous fire extinguishing systems NAF S-III (HCFC Blend A) Total flooding systems
AS/NZS 3788:1996 Pressure equipment - In-service inspection
AS/NZS 3130:1995 Approval and test specification - Beauty therapy equipment
AS 2875-1995 Alloy steel cylinders for compressed gases - Seamless - 0.1 kg to 500 kg
AS/NZS 2243.1:2005 Safety in laboratories Planning and operational aspects
AS/NZS 1596:1997 Storage and handling of LP Gas
HB 40.1-1997 The Australian Refrigeration and Airconditioning Code of Good Practice Reduction of Emissions of Fluorocarbon Refrigerants in Commercial and Industrial Refrigeration and Airconditioning Applications
AS/NZS 2299.3:2003 Occupational diving operations - Recreational industry diving and snorkelling operations
AS 4005.1-1992 Training and certification of recreational divers Minimum entry-level SCUBA diving
AS/NZS 2982.1:1997 Laboratory design and construction General requirements
AS 3536.1-1998 Reference gases - Preparation and certification of gravimetric Standards
AS 4211.1-1996 Gas recovery or combined recovery and recycling equipment Fluorocarbon refrigerants from automotive airconditioning systems
AS/NZS 1425:2003 LP Gas fuel systems for vehicle engines
AS 2337.2-2004 Gas cylinder test stations LP Gas fuel vessels for automotive use (Reconfirmed 2016)
AS 4332-2004 The storage and handling of gases in cylinders (Reconfirmed 2016)
AS 5062-2006 Fire protection for mobile and transportable equipment
AS/NZS 1841.1:1997 Portable fire extinguishers General requirements
AS 4214.4-1995 Gaseous fire extinguishing systems FM-200 (HFC-227ea) Systems
AS 2815.5-2006 Training and certification of occupational divers - Dive supervisor
AS/NZS 1425:2007 LP Gas fuel systems for vehicle engines
AS 4214.7-1998 Gaseous fire extinguishing systems - Triodide (FIC-13I1) total flooding systems
AS 3689.2-1991 Automatic fire extinguishing systems using halogenated hydrocarbons Mechanical components
AS 3848.1-1999 Filling of portable gas cylinders Decant filling of medical air and oxygen into portable cylinders - Safe procedures
AS 2527-2006 Cylinders for dissolved acetylene
AS 2473-1996 Valves for compressed gas cylinders (threaded outlet)
AS 4211.1(INT)-1994 Gas recovery or combined recovery and recycling equipment Automotive air-conditioning systems
AS/NZS 2430.3.1:2004 Classification of hazardous areas Examples of area classification - General
AS/NZS 1841.6:2007 Portable fire extinguishers Specific requirements for carbon dioxide type extinguishers (Reconfirmed 2021)
AS/NZS 3788:2006 Pressure equipment - In-service inspection (Reconfirmed 2017)
AS 3536.2-1998 Reference gases - Preparation, analysis and certification of traceable reference gas mixtures
AS 4983-2003 Gas fuel systems for forklifts and industrial engines
AS/NZS 1596:2008 The storage and handling of LP Gas
AS 2472-1996 Valves for medical gas cylinders (Including pin-indexed outlet)
AS 5034-2005 Installation and use of inert gases for beverage dispensing
AS 3772-2008 Pre-engineered fire protection systems for cooking equipment
AS 4774.2-2002 Work in compressed air and hyperbaric facilities - Hyperbaric oxygen facilities
HB 13-2007 Electrical equipment for hazardous areas
AS 3676-1989 Portable fire extinguishers - Guide to servicing
AS 2764-2002 Fibre reinforced plastics (FRP) aluminium alloy gas cylinders - Hoop overwrapped
AS/NZS 1841.6:1997 Portable fire extinguishers - Specific requirements for carbon dioxide type extinguishers
AS 4078-1992 Fire protection - Fire extinguishing media - Carbon dioxide (Reconfirmed 2018)
AS/NZS 2927:2001 The storage and handling of liquefied chlorine gas
AS 1841.6-1992 Carbon dioxide type
AS 3580.2.2-1990 Methods for sampling and analysis of ambient air Preparation of reference test atmospheres - Compressed gas method
AS 2474-1990 Valves for compressed gas cylinders (diameter-indexed outlets)
AS 4214.3-1995 Gaseous fire extinguishing systems Carbon dioxide systems
AS 2469-2005 Steel cylinders for compressed gases - Welded two-piece construction - 0.1 kg to 150 kg
AS 4005.1-2000 Training and certification of recreational divers - Minimum entry-level SCUBA diving
HB 13-2000 Electrical equipment for hazardous areas
AS 1777-1995 Aluminium cylinders for compressed gases - Seamless - 0.1 kg to 130 kg
AS 1851-2005 Maintenance of Fire Protection Systems and Equipment
AS 4484-2004
AS 2468-1989 Steel cylinders for compressed gases - Brazed - 0.1 kg to 11 kg
AS/NZS 3788:2001 Pressure equipment - In-service inspection
AS 2473.3-2004 Valves for compressed gas cylinders - Outlet connections for medical gases (including pin-indexed yoke connections)
AS 2337.1-1999 Gas cylinder test stations General requirements, inspections and tests - Gas cylinders
AS 4732-2002 LP Gas fuel systems for marine engines
AS 4839-2001 The safe use of portable and mobile oxy-fuel gas systems for welding, cutting, heating and allied processes (Reconfirmed 2016)
AS 4214-2002 Gaseous fire extinguishing systems
AS 2971-2002 Serially produced pressure vessels
AS 2971-2007 Serially produced pressure vessels (Reconfirmed 2017)
AS 4332-1995 The storage and handling of gases in cylinders
AS 4214.1-1995 Gaseous fire extinguishing systems General requirements
AS 4265-1995 Wheeled fire extinguishers (Reconfirmed 2021)
AS 1851.1-1995 Maintenance of fire protection equipment Portable fire extinguishers and fire blankets
AS 3848.2-1999 Filling of portable gas cylinders Filling of portable cylinders for self-contained underwater breathing apparatus (SCUBA) and non-underwater self-contained breathing apparatus (SCBA) - Safe procedures
AS 2470-1998 Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11 kg to 150 kg

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.