AS/NZS 1734:1997
Current
The latest, up-to-date edition.
Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate (Reconfirmed 2020)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
05-07-1997
Specifies requirements for wrought aluminium and aluminium alloy flat sheet, coiled sheet and plate for general engineering purposes. Chemical composition, mechanical properties and allowable tolerances on dimensions are specified. An appendix provides information on typical fabrication characteristics and applications.
Committee |
MT/3
|
DocumentType |
Standard
|
ISBN |
0 7337 1204 5
|
Pages |
36
|
ProductNote |
Reconfirmed 21/08/2020.
This standard has been reconfirmed in Australia in 2020 and remains current in New Zealand. Reconfirmation Notice 21/08/2020 |
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
This Standard specifies requirements for wrought aluminium and aluminium alloy flat sheet, coiled sheet and plate for general engineering purposes. It applies to locally manufactured or imported material grades commonly used in Australia and New Zealand.NOTES:1 Advice and recommendations on information to be supplied by the purchaser at the time of enquiry or order are contained in the purchasing guidelines set out in Appendix A.2 Typical fabrication characteristics and application data for wrought aluminium and aluminium alloys are given in Appendix B.
Originated in Australia as AS H48-1949.
Previous edition AS 1734-1986.
Jointly revised and designated AS/NZS 1734:1997.
AS 1391-2007 | Metallic materials - Tensile testing at ambient temperature (Reconfirmed 2017) |
AS 2338-1980 | Preferred dimensions of wrought metal products |
AS 2505.1-1981 | Methods for bend and related testing of metals Sheet, strip and plate |
AS 2706-1984 | Numerical values - Rounding and interpretation of limiting values |
AS 1391-1991 | Methods for tensile testing of metals |
AS 2505.1-2004 | Metallic materials Sheet, strip and plate - Bend tests |
AS 2338-2004 | Preferred dimensions of wrought metal products |
AS 2848.1-1998 | Aluminium and aluminium alloys - Compositions and designations Wrought products (Reconfirmed 2018) |
AS 2706-2003 | Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018) |
AS 2612-1997 | Aluminium and aluminium alloys - Sampling for chemical and spectrochemical analysis |
AS 2427-2004 | Smoke/heat release vents |
AS/NZS 1576.1:2010 | Scaffolding General requirements |
AS/NZS 1576.2:2016 | Scaffolding Couplers and accessories |
AS/NZS 5601.2:2010 | |
AS/NZS 2041.6:2010 | Buried corrugated metal structures Bolted plate structures |
AS 5601-2004 | Gas installations |
AS 4132.2-1993 | Boat and ship design and construction - Aluminium construction |
AS 4326-2008 | The storage and handling of oxidizing agents |
AS 4001.1:2017 | Vehicles - Rear marker plates Reflective rear marker plates - Classification and manufacturing requirements |
AS 3868-1991 | Earth-moving machinery - Design guide for access systems |
AS 2047-1999 | Windows in buildings - Selection and installation |
AS 2089-1993 | Sheave blocks for lifting purposes |
AS 4312-2008 | Atmospheric corrosivity zones in Australia |
AS/NZS 1906.3:2017 | Retroreflective materials and devices for road traffic control purposes Raised pavement markers (retroreflective and non-retroreflective) |
AS 1906.3-1992 | Retroreflective materials and devices for road traffic control purposes Raised pavement markers (retroreflective and non-retroreflective) |
AS/NZS 4994.1(INT):2004 | Temporary roof edge protection for housing and residential buildings General requirements |
AS 4312:2019 | Atmospheric corrosivity zones in Australia |
AS 1799.5-1990 | Small pleasure boats code - Aluminium construction |
AS 5156-2010 | Electronic speed limit signs |
AS 2047-2014 | Windows and external glazed doors in buildings |
AS/NZS 1576.2:2009 | Scaffolding Couplers and accessories |
AS 2809.2:2020 | Road tank vehicles for dangerous goods Road tank vehicles for flammable liquids |
AS 2809.2-1999 | Road tank vehicles for dangerous goods - Tankers for flammable liquids |
AS/NZS 2728:2013 | Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements |
AS 1562.1:2018 | Design and installation of metal roof and wall cladding Metal |
AS/NZS 5601.2:2020 | Gas installations LP Gas installations in caravans and boats for non-propulsive purposes |
AS 4041-2006 | Pressure piping (Reconfirmed 2016) |
AS 4326-1995 | The storage and handling of oxidizing agents |
AS 4001.3-2003 | Motor vehicles - Rear marker plates - Manufacturing and classification requirements for Class 2 reflective plates |
AS/NZS 2041.1:2011 | Buried corrugated metal structures Design methods |
AS 1657-1992 | Fixed platforms, walkways, stairways and ladders - Design, construction and installation |
AS 2809.4-2001 | Road tank vehicles for dangerous goods - Tankers for toxic and corrosive cargoes |
AS 3554-1988 | Adhesives - Epoxy - For raised pavement marker installation |
AS 1577-1993 | Scaffold planks |
AS 2809.2-2008 | Road tank vehicles for dangerous goods Road tank vehicles for flammable liquids |
AS 4285:2019 | Rooflights |
AS/NZS 1906.1:2007 | Retroreflective materials and devices for road traffic control purposes Retroreflective sheeting |
AS/NZS 2041.4:2010 | Buried corrugated metal structures Helically formed sinusoidal pipes |
AS/NZS 1576.3:1995 | Scaffolding Prefabricated and tube-and-coupler scaffolding |
AS 4852.1-2009 | Variable message signs Fixed signs |
AS/NZS 5601.1:2013 | Gas installations General installations |
AS 4254.2-2012 | Ductwork for air-handling systems in buildings Rigid duct |
AS/NZS 2728:2007 | Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements |
AS 4254-2002 | Ductwork for air-handling systems in buildings |
AS 1576.4-1991 | Scaffolding Suspended scaffolding |
AS 4001.1-2003 | Motor vehicles - Rear marker plates Manufacturing and classification requirements for Class 1A and Class 1 reflective plates |
AS 1231-2000 | Aluminium and aluminium alloys - Anodic oxidation coatings |
AS/NZS 1577:2018 | Scaffold decking components |
AS/NZS 5601.2:2013 | Gas installations LP Gas installations in caravans and boats for non-propulsive purposes |
AS 2313.4.1-2006 | Methods of test for single sided and double sided pressure-sensitive adhesive tape Printing properties - Determining indelibility of printed labels |
AS 1210-1997 | Pressure vessels |
AS 2581-1998 | Pressure-sensitive adhesive labels for general purpose use |
AS/NZS 1576.5:1995 | Scaffolding Prefabricated splitheads and trestles |
AS/NZS 5601.1:2010 | Gas installations General installations |
AS 1743-2001 | Road signs - Specifications |
AS 3715-2002 | Metal finishing - Thermoset powder coatings for architectural applications of aluminium and aluminium alloys |
AS/NZS 1576.4:2013 | Scaffolding Suspended scaffolding (Reconfirmed 2024) |
AS 1562.1-1992 | Design and installation of sheet roof and wall cladding Metal (Reconfirmed 2016) |
AS/NZS 1580.104.1:2000 | Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013) |
AS/NZS 2179.1:1994 | Specifications for rainwater goods, accessories and fasteners Metal shape or sheet rainwater goods, and metal accessories and fasteners |
AS/NZS 2785:2000 | Suspended ceilings - Design and installation |
AS 2809.4:2017 | Road tank vehicles for dangerous goods Tankers for toxic and corrosive cargoes |
AS 4285-2007 | Skylights |
AS 4852.1:2019 | Variable message signs Fixed signs |
AS 1576.2-1991 | Scaffolding Couplers and accessories |
AS/NZS 2041:1998 | Buried corrugated metal structures |
AS/NZS 1665:2004 | Welding of aluminium structures (Reconfirmed 2016) |
AS/NZS 4994.1:2009 | Temporary edge protection General requirements |
AS 6001-1999 | Working platforms for housing construction |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.