• There are no items in your cart

AS/NZS 3560.1:2000

Current

Current

The latest, up-to-date edition.

Electric cables - Cross-linked polyethylene insulated - Aerial bundled - For working voltages up to and including 0.6/1(1.2) kV Aluminium conductors (Reconfirmed 2021)

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

07-04-2000

€65.33
Excluding VAT

Provides methods of measurement of ballast energy consumption and performance when used with associated fluorescent lamps as part of luminaires and applies to those covered within the scope of IEC 60081 and IEC 60901. The common methods practiced in major parts of the world, Europe in particular are prescribed in This Standard and relevant appendices. The tests specified are derived from EN 50294 with significant restructuring and modifications. The scope of this Standard excludes self-ballasted lamps and does not cover safety requirements.

Committee
EL-003
DocumentType
Standard
ISBN
0 7337 3291 7
Pages
25
PublisherName
Standards Australia
Status
Current
Supersedes

This Standard specifies the construction, dimensions and tests for 0.6/1 kV rated cross-linked polyethylene insulated aerial bundled cables (ABC) of 2, 3 or 4 cores having aluminium conductors with cross-sectional areas of 16 mm2 to 150 mm2.The cables are designed for use with mechanical fittings for aerial bundled cables specified in AS 3766.Cable construction, identification and preparation for delivery requirements are specified in Section 2 and tests in Section 3.NOTES: 1 See Appendix A for guidelines on information that should be supplied with enquiries or orders.2 See Appendix E for technical data on cables and a guide to cable selection.

Originated as AS 3560-1988.
Previous edition AS 3560-1991.
Jointly revised and redesignated as AS/NZS 3560.1:2000.

AS/NZS 1660.2.5:1998 Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to cables above 1 kV (Reconfirmed 2017)
AS/NZS 1660.4:1998 Test methods for electric cables, cords and conductors Complete cable and flexible cord (Reconfirmed 2017)
AS/NZS 2857:1996 Timber drums for insulated electric cables and bare conductors
AS 3766-1990 Mechanical fittings for low voltage aerial bundled cables
AS/NZS 3008.1.1:1998 Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions
AS/NZS 1660.1:1998 Test methods for electric cables, cords and conductors Conductors and metallic components (Reconfirmed 2017)
AS 3983-1991 Metal drums for insulated electric cables and bare conductors (Reconfirmed 2016)
AS 2706-1984 Numerical values - Rounding and interpretation of limiting values
AS/NZS 1660.5.6:1998 Test methods for electric cables, cords and conductors Fire tests - Test for combustion propagation
AS/NZS 1660.2.1:1998 Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods for general application (Reconfirmed 2017)
AS/NZS 3008.1.2:1998 Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand installation conditions
AS/NZS 1660.2.3:1998 Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to PVC and halogen free thermoplastic materials (Reconfirmed 2017)
AS/NZS 3100:1997 Approval and test specification - General requirements for electrical equipment
AS/NZS 1660.2.2:1998 Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to elastomeric, XLPE and XLPVC materials (Reconfirmed 2017)
AS/NZS 1660.5.2:1998 Test methods for electric cables, cords and conductors Fire tests - Smoke density
AS 1125-1993 Conductors in insulated electric cables and flexible cords
AS/NZS 1660.5.4:1998 Test methods for electric cables, cords and conductors - Fire tests - Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity
AS 2193-1978 Methods for calibration and grading of force-measuring systems of testing machines
AS/NZS 1660.3:1998 Test methods for electric cables, cords and conductors Electrical tests (Reconfirmed 2017)
AS/NZS 3808:1998 Insulating and sheathing materials for electric cables
AS/NZS 1660.5.3:1998 Test methods for electric cables, cords and conductors Fire tests - Determination of the amount of halogen acid gas evolved during the combustion of polymeric materials taken from cables
AS/NZS 1660.2.4:1998 Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to polyethylene and polypropylene materials (Reconfirmed 2017)
AS/NZS 1660.5.5:1998 Test methods for electric cables, cords and conductors Fire tests - Circuit integrity under fire conditions
AS/NZS 1660.5.1:1998 Test methods for electric cables, cords and conductors Fire tests - Tests on bunched cables

AS/NZS 3018:2001 Electrical installations - Domestic installations
AS/NZS 5000.1:2005 Electric cables - Polymeric insulated For working voltages up to and including 0.6/1 (1.2) kV (Reconfirmed 2017)
AS/NZS 7000:2016 Overhead line design
AS/NZS 3947.3:2001 Low-voltage switchgear and controlgear Switches, disconnectors, switch-disconnectors and fuse-combination units
AS/NZS 3008.1.1:2017 Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions
HB 331-2012 Overhead line design
AS/NZS 3008.1.2:2010 Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand conditions
AS/NZS 7000:2010 Overhead line design - Detailed procedures
AS/NZS 3947.3 SUPP 1:2001 Low-voltage switchgear and controlgear Switches, disconnectors, switch-disconnectors and fuse-combination units - Fuse-switch-disconnectors and switch-disconnectors for use with low-voltage aerial bundled cables (Supplement to AS/NZS 3947.3:2001)
AS/NZS 3008.1.1:2009 Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions
AS/NZS 3008.1.2:2017 Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand conditions
AS/NZS 5000.1:2003 Electric cables - Polymeric insulated For working voltages up to and including 0.6/1 (1.2) kV
AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 3808:2000 Insulating and sheathing materials for electric cables (Reconfirmed 2017)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.