AS/NZS 3679.1:2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Structural steel Hot-rolled bars and sections
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
01-09-2021
English
20-07-2010
Important note : Users cannot be edited or removed once added to your Multi user PDF.Specifies the requirements for the production and supply of hot-rolled structural steel bars and sections.
| Committee |
BD-023
|
| DocumentType |
Standard
|
| ISBN |
978 0 7337 9637 1
|
| Pages |
38
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard specifies the requirements for the production and supply of hot-rolled structural steel bars and sections.For general structural and engineering applications, all grades specified in this Standard are suitable for - (a) welding in accordance with AS/NZS 1554.1; or(b) riveting and bolting as specified in AS/NZS 4600, AS 3990, AS 4100 and NZS 3404.This Standard does not cover the following:(i) Structural steel - Hot-rolled plates, floorplates and slabs, and welded I sections.(ii) Steel plates for pressure equipment.(iii) Structural steel hollow sections.(iv) Carbon steels and carbon-manganese steels - Hot-rolled bars and semifinished products.(v) Steel reinforcing bars for concrete.(vi) Structural and pressure vessel steel - Quenched and tempered plate.Requirements for product conformity to this Standard are given in Appendix B.NOTES:1 Guidelines to purchasers on requirements that should be specified by the purchaser and those that should or may be agreed on at the time of enquiry and order are given in Appendix A.2 Guidelines on cold-bending of rounds, flats and squares during fabrication are given in Appendix C.
Originated in Australia as for of AS A1-1925.
Previous edition AS/NZS 3679.1:1996.
Third edition 2010.
| AS 3990-1993 | Mechanical equipment - Steelwork (Reconfirmed 2016) |
| AS 2706-2003 | Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018) |
| AS/NZS 1050.14:1994 | Methods for the analysis of iron and steel Determination of manganese in iron and steel - Titrimetric method |
| AS 1544.2-2003 | Method for impact tests on metals Charpy V-notch (Reconfirmed 2017) |
| AS/NZS 1554.1:2004 | Structural steel welding Welding of steel structures |
| AS/NZS ISO 9001:2008 | Quality management systems - Requirements |
| AS/NZS 4600:2005 | Cold-formed steel structures |
| AS/NZS 1050.1:1996 | Methods for the analysis of iron and steel Sampling iron and steel for chemical analysis |
| AS/NZS 1050.16:1994 | Methods for the analysis of iron and steel Determination of sulfur content - Infrared absorption method after combustion in an induction furnace (Reconfirmed 2017) |
| AS 1391-2007 | Metallic materials - Tensile testing at ambient temperature (Reconfirmed 2017) |
| AS 4100-1998 | Steel structures (Reconfirmed 2016) |
| AS 4100 SUPP 1-1999 | Steel structures - Commentary (Supplement to AS 4100-1998) |
| AS/NZS 4600 SUPP 1:1998 | Cold-formed steel structures - Commentary (Supplement to AS/NZS 4600:1996) |
| AS/NZS 1050.18:1994 | Methods for the analysis of iron and steel Determination of phosphorus - Spectrophotometric method (Reconfirmed 2016) |
| AS/NZS 1577:2013 | Scaffold decking components |
| AS 1210-2010 | Pressure vessels (Reconfirmed 2021) |
| AS/NZS 1554.5:2011 | Structural steel welding Welding of steel structures subject to high levels of fatigue loading |
| AS/NZS 3678:2016 | Structural steel - Hot-rolled plates, floorplates and slabs |
| SA HB 108-2013 | Timber design handbook |
| SA TS 102:2016 | Structural steel - Limits on elements added |
| AS 4254.2-2012 | Ductwork for air-handling systems in buildings Rigid duct |
| AS/NZS 1576.4:2013 | Scaffolding Suspended scaffolding (Reconfirmed 2024) |
| AS/NZS 3678:2011 | Structural steel - Hot-rolled plates, floorplates and slabs |
| AS 2304-2011 | Water storage tanks for fire protection systems |
| AS/NZS 1554.1:2011 | Structural steel welding Welding of steel structures |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.