AS/NZS 61241.0:2005
Obsolescent
“Obsolescent” indicates that the Standard is not recommended for new equipment or as a current practice, but it is retained in order to provide for servicing of existing equipment or requirements.
Electrical apparatus for use in the presence of combustible dust General requirements
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
03-05-2005
Important note : Users cannot be edited or removed once added to your Multi user PDF.Specifies general requirements for the design, construction, testing and marking of electrical apparatus protected by any recognized safeguard technique for use in areas where combustible dust may be present in quantities that could lead to a fire or explosion hazard. This Standard is identical with and has been reproduced from IEC 61241-0:2004.
| Committee |
EL-014
|
| DocumentType |
Standard
|
| ISBN |
0 7337 6671 4
|
| Pages |
39
|
| ProductNote |
Obsolescent in Australia only.
|
| PublisherName |
Standards Australia
|
| Status |
Obsolescent
|
| Supersedes |
| Standards | Relationship |
| IEC 61241-0:2004 | Identical |
Originated as AS C358-1965.
Revised and redesignated as AS 2236-1979.
Final Australian edition AS 2236-1994.
Jointly revised and redesignated as AS/NZS 61241.1.1:1999.
Revised and renumbered (in part) as AS/NZS 61241.0:2005.
| AS/NZS 60079.11:2000 | Electrical apparatus for explosive gas atmospheres Intrinsic safety 'i' |
| AS 1420-2001 | ISO metric hexagon socket head cap screws |
| AS/NZS 3947.3:2001 | Low-voltage switchgear and controlgear Switches, disconnectors, switch-disconnectors and fuse-combination units |
| AS 1110.1-2000 | ISO metric hexagon bolts and screws - Product grades A and B - Bolts |
| AS/NZS 61241.1:2005 | Electrical apparatus for use in the presence of combustible dust Protection by enclosures 'tD' |
| AS/NZS 60079.7:2002 | |
| AS 1654.2-1995 | ISO system of limits and fits - Tables of standard tolerance grades and limit deviations for holes and shafts |
| AS/NZS 60079.0:2005 | Electrical apparatus for explosive gas atmospheres General requirements |
| AS 1112.1-2000 | ISO metric hexagon nuts Style 1 - Product grades A and B |
| AS 1145.5-2001 | Determination of tensile properties of plastics materials Test conditions for fibre-reinforced plastic composites |
| AS 1145.3-2001 | Determination of tensile properties of plastics materials - Test conditions for films and sheets |
| AS 1145.2-2001 | Determination of tensile properties of plastics materials Test conditions for moulding and extrusion plastics |
| AS 1145.4-2001 | Determination of tensile properties of plastics materials Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
| AS 1145.1-2001 | Determination of tensile properties of plastics materials General principles |
| AS 1110.2-2000 | ISO metric hexagon bolts and screws - Product grades A and B - Screws |
| AS/NZS 3800:2012 | Electrical equipment for explosive atmospheres - Repair and overhaul |
| AS/NZS 61241.14:2005 | Electrical apparatus for use in the presence of combustible dust Selection and installation (IEC 61241-14, Ed.1.0(2004) MOD) |
| AS 3846-2005 | The handling and transport of dangerous cargoes in port areas |
| AS/NZS 4761.2:2008 | Competencies for working with electrical equipment for hazardous areas (EEHA) Guide to assessing competency |
| AS/NZS 3004.2:2008 | Electrical installations - Marinas and recreational boats Recreational boats installations |
| AS/NZS 3019:2007 | Electrical installations - Periodic verification |
| HB 239:2011 | Guidance on the repair and overhaul of electrical equipment for explosive atmospheres |
| AS/NZS 61241.10:2005 | Electrical apparatus for use in the presence of combustible dust Classification of areas where combustible dusts are or may be present |
| AS 60204.11-2006 | Safety of machinery - Electrical equipment of machines Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c and not exceeding 36 kV (IEC 60204-11, Ed. 1.0 (2000) MOD) |
| AS/NZS 2381.1:2005 | Electrical equipment for explosive gas atmospheres - Selection, installation and maintenance General requirements |
| AS 60204.1-2005 | Safety of machinery - Electrical equipment of machines General requirements (IEC 60204-1, Ed. 5 (FDIS) MOD) |
| AS/NZS 5026:2012 | The storage and handling of Class 4 dangerous goods (Reconfirmed 2024) |
| AS/NZS 61241.1:2005 | Electrical apparatus for use in the presence of combustible dust Protection by enclosures 'tD' |
| HB 13-2007 | Electrical equipment for hazardous areas |
| AS/NZS 61241.11:2006 | Electrical apparatus for use in the presence of combustible dust Protection by intrinsic safety iD |
| AS/NZS 61241.18:2005 | Electrical apparatus for use in the presence of combustible dust Protection by encapsulation 'mD' |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.