ASTM D 1193 : 2024
Current
The latest, up-to-date edition.
Standard Specification for Reagent Water
Hardcopy , PDF
English
01-11-2024
Committee |
D 19
|
DocumentType |
Standard
|
Pages |
5
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This specification covers the required characteristics of waters deemed suitable for use with the standards under the jurisdiction of ASTM International.
1.2The alphanumeric characters ascribed to water types and grades are specified in the manual, Form and Style for ASTM Standards.2 These have been assigned in order of historical precedence and should not be taken as an indication of a progression in water purity.
1.3Four types of waters have been specified with three additional grades that can be applied to the four types. The grade specifications specifically address contaminants of microbiological origin.
1.4All applicable ASTM International standards are expected to reference one or more of these reagent water types where reagent water is needed as a component of an analytical measurement process.
1.5Although these water types and associated grades have been defined specifically for use with ASTM International standards, they may be appropriate for other applications. It is the responsibility of the users of this specification to ensure that the selected water types or grades are suitable for their intended use. Historically, reagent water Types I, II, III, and IV have been linked to specific processes for their production. Starting with the 2018 edition of this specification, these types of waters may be produced with alternate technologies as long as the appropriate constituent specifications are met (including bacteria and endotoxins, if applicable) and that water so produced has been shown to be appropriate for the application where the use of such water is specified.
1.6Guidance for applications, the preparation, use and monitoring, storage, handling, distribution, testing of these specified waters, and validation of the water purification system is provided in Appendix X1 of this specification.
1.7Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.8This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.9This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E 1787 : 2016 | Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography |
ASTM G 103 : 1997 : R2023 : EDT 1 | Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6 % Sodium Chloride Solution |
ASTM D 8404 : 2021 | Standard Practice for Preparation of Soil Samples by Ammonium Bifluoride-Nitric Acid Digestion for Subsequent Analysis for Metals and Metalloids |
ASTM D 511 : 2014 : R2021 : EDT 1 | Standard Test Methods for Calcium and Magnesium In Water |
ASTM D 5057 : 2017 | Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste |
ASTM D 8543 : 2024 | Standard Test Method for Determination of Pesticides and Polychlorinated Biphenyls (PCBs) in Aqueous Solution by a Tandem Gas Chromatography/Mass Spectrometry/Mass Spectrometry (GC/MS/MS) |
ASTM D 8001 : 2016 : EDT 1 | Standard Test Method for Determination of Total Nitrogen, Total Kjeldahl Nitrogen by Calculation, and Total Phosphorus in Water, Wastewater by Ion Chromatography |
ASTM D 2086 : 2022 | Standard Test Method for Acidity in Vinyl Acetate and Acetaldehyde |
ASTM D 1691 : 2017 | Standard Test Methods for Zinc in Water |
ASTM B 678 : 2023 | Standard Test Method for Solderability of Metallic-Coated Products |
ASTM D 4129 : 2005 : R2020 | Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection |
ASTM C 1907 : 2021 | Standard Practice for Preparation of Plutonium Materials by Pyrohydrolysis for Determination of Fluoride, Chloride, or Both |
ASTM G 28 : 2022 | Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys |
ASTM D 8345 : 2021 | Standard Test Method for Determination of an Emission Parameter for Phthalate Esters and Other Non-Phthalate Plasticizers from Planar Polyvinyl Chloride Indoor Materials for Use in Mass Transfer Modeling Calculations |
ASTM E 3269 : 2021 | Standard Test Method for Determination of the Mass Fraction of Particle-Bound Gold in Colloidal Gold Suspensions |
ASTM D 8026 : 2016 | Standard Practice for Determination of Tc-99 in Water by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) |
ASTM D 7645 : 2023 | Standard Test Method for Determination of Aldicarb, Aldicarb Sulfone, Aldicarb Sulfoxide, Carbofuran, Methomyl, Oxamyl, and Thiofanox in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
ASTM D 3375 : 2018 | Standard Test Method for Column Capacity of Particulate Mixed Bed Ion<brk/>Exchange Materials |
ASTM D 4309 : 2018 | Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water |
ASTM D 5953M : 2023 | Standard Test Method for Determination of Non-methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection |
ASTM D 3339 : 2021 | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
ASTM D 4042 : 2024 | Standard Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils |
ASTM G 208 : 2012 : R2020 | Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus |
ASTM D 2248 : 2001 : REV A : R2018 | Standard Practice for Detergent Resistance of Organic Finishes |
ASTM B 137 : 1995 : R2021 | Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum |
ASTM E 1241 : 2022 | Standard Guide for<brk type="line"/> Conducting Early Life-Stage Toxicity Tests with Fishes |
ASTM D 5464 : 2016 | Standard Test Method for pH Measurement of Water of Low Conductivity |
ASTM D 5233 : 1992 : R2023 | Standard Test Method for Single Batch Extraction Method for Wastes |
ASTM D 7840 : 2024 | Standard Test Method for Foaming Tendencies of Non-Aqueous Engine Coolants in Glassware |
ASTM D 7937 : 2015 : R2023 | Standard Test Method for In-situ Determination of Turbidity Above 1 Turbidity Unit (TU) in Surface Water |
ASTM D 7785 : 2021 | Standard Practice for Water in Lint Cotton by Oven Evaporation Combined with Volumetric Karl Fischer Titration |
ASTM D 874 : 2023 | Standard Test Method for Sulfated Ash from Lubricating Oils and Additives |
ASTM E 2469 : 2024 | Standard Test Method for Chloride in Mono-, Di- and Tri-ethylene Glycol by Ion Chromatography |
ASTM G 136 : 2003 : R2023 : EDT 1 | Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction |
ASTM D 7644 : 2023 | Standard Test Method for Determination of Bromadiolone, Brodifacoum, Diphacinone and Warfarin in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
ASTM E 563 : 2022 | Standard Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature |
ASTM G 122 : 2020 | Standard Test Method for Evaluating the Effectiveness of Cleaning Agents and Processes |
ASTM D 3978 : 2021 : REV A | Standard Practice for Algal Growth Potential Testing with <emph type="ital">Pseudokirchneriella subcapitata</emph> |
ASTM F 1115 : 2016 : R2023 | Standard Test Method for Determining the Carbon Dioxide Loss of Beverage Containers |
ASTM D 5072 : 2009 : R2016 | Standard Test Method for Radon in Drinking Water |
ASTM D 3634 : 2021 | Standard Test Method for Trace Chloride Ion in Engine Coolants |
ASTM C 1637 : 2021 | Standard Test Method for Determination of Impurities in Plutonium Materials—Acid Digestion and Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) Analysis |
ASTM E 3190 : 2019 | Standard Practice for Preparation of Fixed Radiological/Surrogate Contamination on Porous Test Coupon Surfaces for Evaluation of Decontamination Techniques |
ASTM E 1839 : 2020 | Standard Practice for Efficacy of Slimicides for the Paper Industry—Bacterial and Fungal Slime |
ASTM D 2008 : 2023 | Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products |
ASTM C 813 : 2020 : R2024 | Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement |
ASTM D 3943 : 2021 | Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts |
ASTM D 4423 : 2023 | Standard Test Method for Determination of Carbonyls in C<inf>4</inf> Hydrocarbons |
ASTM E 2313 : 2022 | Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry) |
ASTM D 7591 : 2012 : R2017 | Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography |
ASTM F 3012 : 2022 | Standard Specification for Loose-Fill Rubber for Use as a Playground Safety Surface under and around Playground Equipment |
ASTM D 128 : 2024 : REV A | Standard Test Methods for Analysis of Lubricating Grease |
ASTM D 1512 : 2023 | Standard Test Methods for Carbon Black—pH Value |
ASTM D 5258 : 2022 | Standard Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating |
ASTM D 4646 : 2016 : R2023 | Standard Test Method for 24 h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments |
ASTM D 6561 : 2020 | Standard Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2–phenyl-1) Piperazine (MOPIP) in the Workplace |
ASTM D 7637 : 2010 : R2021 | Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate) |
ASTM D 4782 : 2024 | Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry |
ASTM C 1218/C1218M : 2020 | Standard Test Method for Water-Soluble Chloride in Mortar and Concrete |
ASTM D 6504 : 2011 : R2024 | Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water |
ASTM D 1739 : 1998 : R2017 | Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter) |
ASTM D 6785 : 2020 | Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry |
ASTM D 6139 : 2022 | Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask |
ASTM D 5890 : 2019 | Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners |
ASTM E 1754 : 2017 : REV A | Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry |
ASTM D 4636 : 2017 | Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils |
ASTM E 104 : 2020 : REV A | Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions |
ASTM D 2908 : 1991 : R2024 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography |
ASTM E 3334 : 2024 | Standard Test Method for Acidity in Ethanol and Ethanol Solutions |
ASTM D 6850 : 2018 | Standard Guide for QC of Screening Methods in Water |
ASTM D 7521 : 2022 | Standard Test Method for Determination of Asbestos in Soil |
ASTM E 2408 : 2004 : R2023 | Standard Test Method for Relative Extensional Viscosity of Agricultural Spray Tank Mixes |
ASTM B 827 : 2005 : R2020 | Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests |
ASTM D 3685/D3685M : 2013 : R2021 | Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases |
ASTM D 3227 : 2024 | Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method) |
ASTM D 4519 : 2016 | Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity |
ASTM E 1277 : 2023 | Standard Test Method for Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry |
ASTM G 85 : 2019 | Standard Practice for Modified Salt Spray (Fog) Testing |
ASTM E 1153 : 2022 | Standard Test Method for Efficacy of Sanitizers Recommended for Inanimate, Hard, Nonporous Non-Food Contact Surfaces |
ASTM D 7876 : 2013 : R2018 | Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants |
ASTM C 760 : 1990 : R2020 | Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys |
ASTM D 4877 : 2019 | Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates |
ASTM D 4370 : 2001 : R2023 | Standard Test Methods for Acid and Base Milliequivalent Content of Electrocoat Bath |
ASTM D 7704 : 2024 | Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration |
ASTM D 7773 : 2019 | Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO<inf >3</inf>) Using Filter Sampling and Suppressed Ion Chromatography |
ASTM D 3926 : 2005 : R2019 | Standard Test Methods for Percent Solids in Titanium Dioxide Slurries |
ASTM C 187 : 2023 | Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste |
ASTM G 140 : 2002(R2019) | Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method |
ASTM F 483 : 2009 : R2020 | Standard Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals |
ASTM D 3223 : 2017 | Standard Test Method for Total Mercury in Water |
ASTM D 5002 : 2022 | Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer |
ASTM D 7563 : 2023 | Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel |
ASTM D 4315 : 2021 | Standard Test Methods for Rubber Compounding Material—Zinc Oxide |
ASTM D 5367 : 2016 : R2021 | Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted |
ASTM C 1152/C1152M : 2020 | Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete |
ASTM D 1253 : 2014 : R2021 : EDT 1 | Standard Test Method for Residual Chlorine in Water |
ASTM D 8401 : 2024 | Standard Test Method for Identification of Polymer Type and Quantity of Microplastic Particles and Fibers in Waters with High to Low Suspended Solids Using Pyrolysis-Gas Chromatography/Mass Spectrometry |
ASTM C 1752 : 2021 | Standard Guide for Measuring Physical and Rheological Properties of Radioactive Solutions, Slurries, and Sludges |
ASTM D 3256 : 1986 : R2020 | Standard Test Methods for Chemical Analysis of Phthalocyanine Blue and Green Pigments |
ASTM E 542 : 2022 | Standard Practice for Gravimetric Calibration of Laboratory Volumetric Instruments |
ASTM E 775 : 2015 : R2021 | Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel |
ASTM D 5391 : 2023 | Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample |
ASTM E 1184 : 2021 | Standard Practice for Determination of Elements by Graphite Furnace Atomic Absorption Spectrometry |
ASTM C 791 : 2024 | Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide |
ASTM D 3561 : 2016 : R2021 : EDT 1 | Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry |
ASTM C 169 : 2016 : R2022 | Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass |
ASTM B 680 : 2024 | Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution |
ASTM D 4251 : 1989 : R2016 | Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration |
ASTM D 4412 : 2019 : R2024 | Standard Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits |
ASTM D 1246 : 2016 : R2021 : EDT 1 | Standard Test Method for Bromide Ion in Water |
ASTM E 3193 : 2023 | Standard Test Method for Measurement of Lead (Pb) by Flame Atomic Absorption Spectrophotometry (FAAS) |
ASTM D 3242 : 2023 | Standard Test Method for Acidity in Aviation Turbine Fuel |
ASTM B 555 : 1986 : R2023 | Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test |
ASTM D 8421 : 2024 | Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances (PFAS) in Aqueous Matrices by Co-solvation followed by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS) |
ASTM E 1915 : 2020 | Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics |
ASTM D 7623 : 2020 | Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method |
ASTM C 1926 : 2023 | Standard Test Method for Measurement of Glass Dissolution Rate Using Stirred Dilute Reactor Conditions on Monolithic Samples |
ASTM C 272/C272M : 2018 : R2024 | Standard Test Method for Water Absorption of Core Materials for Sandwich Constructions |
ASTM D 1179 : 2016 : R2021 : EDT 1 | Standard Test Methods for Fluoride Ion in Water |
ASTM D 1141 : 1998 : R2021 | Standard Practice for Preparation of Substitute Ocean Water |
ASTM C 471M : 2024 | Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric) |
ASTM D 4994 : 2024 | Standard Practice for Recovery of Replicable Viruses from Municipal Wastewater Sludges |
ASTM D 1613 : 2017 : R2023 | Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products |
ASTM D 1570 : 1995 : R2023 | Standard Test Methods for Sampling and Chemical Analysis of Fatty Alkyl Sulfates |
ASTM D 8365 : 2020 | Standard Test Method for Corrosion of Metal Produced by Contact with Leather |
ASTM D 6855 : 2017 : R2023 | Standard Test Method for Determination of Turbidity Below 5 NTU in Static Mode |
ASTM C 233/C233M : 2018 | Standard Test Method for Air-Entraining Admixtures for Concrete |
ASTM D 6832 : 2024 | Standard Test Method for the Determination of Hexavalent Chromium in Workplace Air by Ion Chromatography and Spectrophotometric Measurement Using 1,5-diphenylcarbazide |
ASTM D 891 : 2024 | Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals |
ASTM D 2369 : 2024 | Standard Test Method for Volatile Content of Coatings |
ASTM D 1126 : 2017 | Standard Test Method for Hardness in Water |
ASTM D 2699 : 2024 : REV A | Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel |
ASTM E 394 : 2022 | Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method |
ASTM D 5830 : 2022 | Standard Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography |
ASTM C 560 : 2020 | Standard Test Methods for Chemical Analysis of Graphite |
ASTM D 3859 : 2015 : R2023 | Standard Test Methods for Selenium in Water |
ASTM D 4468 : 2023 | Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and<brk/> Rateometric Colorimetry |
ASTM D 6052 : 1997 : R2023 | Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence |
ASTM C 1220 : 2021 | Standard Test Method for Static Leaching of Monolithic Waste Forms for Disposal of Radioactive Waste |
ASTM E 353 : 2019 : EDT 1 | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
ASTM D 3697 : 2017 | Standard Test Method for Antimony in Water |
ASTM D 665 : 2023 | Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water |
ASTM B 489 : 1985 : R2023 | Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals |
ASTM D 8596 : 2024 | Standard Test Method for Bioavailable Aluminum in Water with Suspended Solids |
ASTM E 1560 : 2018 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers |
ASTM F 1113 : 1987 : R2017 | Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode) |
ASTM D 6974 : 2020 | Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures |
ASTM D 8534 : 2024 | Standard Test Method for Determination of Trace Peroxides in Liquid, Liquefied, and Reagents Soluble Hydrocarbon Streams using Flow Injection System with Ultraviolet/Visible Detector |
ASTM D 5462 : 2021 | Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water |
ASTM B 764 : 2004 : R2021 | Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test) |
ASTM D 2022 : 1989 : R2016 | Standard Test Methods of Sampling and Chemical Analysis of Chlorine-Containing Bleaches |
ASTM D 6317 : 2015 : R2024 | Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection |
ASTM B 994/B994M : 2022 | Standard Specification for Nickel-Cobalt Alloy Coating |
ASTM D 7318 : 2019 : EDT 1 | Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration |
ASTM D 4739 : 2023 | Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration |
ASTM E 1645 : 2021 | Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
ASTM D 2885 : 2021 | Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique |
ASTM G 86 : 2017 | Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments |
ASTM D 4607 : 2014 : R2021 | Standard Test Method for Determination of Iodine Number of Activated Carbon |
ASTM D 7216 : 2023 | Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers |
ASTM D 847 : 2023 | Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons |
ASTM D 7600 : 2016 : R2024 | Standard Test Method for Determination of Aldicarb, Carbofuran, Oxamyl and Methomyl by Liquid Chromatography/Tandem Mass Spectrometry |
ASTM D 6800 : 2018 | Standard Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals |
ASTM C 1590 : 2021 | Standard Practice for Alternate Actinide Calibration for Inductively Coupled Plasma-Mass Spectrometry |
ASTM E 2914/E2914M : 2021 | Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples |
ASTM D 4809 : 2018 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) |
ASTM D 7439 : 2021 | Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry |
ASTM G 131 : 1996 : R2023 : EDT 1 | Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques |
ASTM D 3154 : 2014 : R2023 | Standard Test Method for Average Velocity in a Duct (Pitot Tube Method) |
ASTM B 689 : 1997 : R2023 | Standard Specification for Electroplated Engineering Nickel Coatings |
ASTM E 649 : 2017 : REV A | Standard Test Method for Bromine in Chlorine |
ASTM E 1600 : 2023 | Standard Test Methods for Determination of Gold in Cyanide Solutions |
ASTM E 2090 : 2012 : R2020 | Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy |
ASTM D 445 : 2024 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
ASTM D 512 : 2023 | Standard Test Methods for Chloride Ion In Water |
ASTM D 1394 : 1976 : R2020 | Standard Test Methods for Chemical Analysis of White Titanium Pigments |
ASTM D 516 : 2022 | Standard Test Method for Sulfate Ion in Water |
ASTM D 8034/D8034M : 2024 | Standard Test Method for Simulated Service Corrosion Testing of Non-Aqueous Engine Coolants |
ASTM E 203 : 2024 | Standard Test Method for Water Using Volumetric Karl Fischer Titration |
ASTM D 3868 : 2015 : R2023 | Standard Test Method for Fluoride Ions in Brackish Water, Seawater, and Brines |
ASTM D 5752 : 2010 : R2017 | Standard Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines |
ASTM D 2379 : 2009 : R2023 | Standard Test Method for Acidity of Formaldehyde Solutions |
ASTM E 352 : 2023 | Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels |
ASTM G 36 : 2024 | Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution |
ASTM D 2093 : 2003 : R2017 | Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding |
ASTM D 6530 : 2019 | Standard Test Method for Total Active Biomass in Cooling Tower Waters (Kool Kount Assay; KKA) |
ASTM C 1672 : 2023 | Standard Test Method for Determination of the Uranium, Plutonium or Americium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer |
ASTM D 3694 : 1996 : R2024 | Standard Practices for Preparation of Sample Containers and for Preservation of Organic Constituents |
ASTM F 485 : 2008 : R2024 | Standard Practice for Effects of Cleaners on Unpainted Aircraft Surfaces |
ASTM D 887 : 2013 : R2022 | Standard Practices for Sampling Water-Formed Deposits |
ASTM F 3208 : 2020 | Standard Guide for Selecting Test Soils for Validation of Cleaning Methods for Reusable Medical Devices |
ASTM E 316 : 2017 | Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titrimetry |
ASTM D 2187 : 2017 | Standard Test Methods and Practices for Evaluating Physical and Chemical Properties of Particulate Ion-Exchange Resins |
ASTM D 5744 : 2018 : R2024 | Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell |
ASTM D 8429 : 2021 | Standard Test Method for <emph type="bdit">Legionella pneumophila</emph> in Water Samples Using Legiolert |
ASTM D 3872 : 2005 : R2019 | Standard Test Method for Ferrous Iron in Iron Oxides |
ASTM D 3703 : 2018 : R2024 | Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels |
ASTM G 120 : 2015 : R2023 | Standard Practice for Determination of Soluble Residual Contamination by Soxhlet Extraction |
ASTM D 50 : 1990 : R2023 | Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese |
ASTM D 2942 : 2002 : R2023 | Standard Test Method for Total Acid Acceptance of Halogenated Organic Solvents (Nonreflux Methods) |
ASTM D 4047 : 2018 | Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method |
ASTM E 3323 : 2022 | Standard Test Method for Lipid Quantitation in Liposomal Formulations Using High Performance Liquid Chromatography (HPLC) with an Evaporative Light-Scattering Detector (ELSD) |
ASTM C 1845 : 2016 | Standard Practice for The Separation of Lanthanide Elements from Uranium Matrices Using High Pressure Ion Chromatography (HPIC) for Isotopic Analyses by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) |
ASTM B 895 : 2016 : R2024 | Standard Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution |
ASTM D 6349 : 2021 | Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry |
ASTM C 1647 : 2020 | Standard Practice for Removal of Uranium or Plutonium, or both, for Impurity Assay in Uranium or Plutonium Materials |
ASTM D 7513 : 2017 | Standard Test Method for Capacity of Mixed Bed Ion Exchange Cartridges |
ASTM D 7126 : 2015 : R2023 | Standard Test Method for On-Line Colorimetric Measurement of Silica |
ASTM D 1886 : 2014 : R2021 : EDT 1 | Standard Test Methods for Nickel in Water |
ASTM C 25 : 2024 | Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime |
ASTM D 7490 : 2013 : R2022 | Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements |
ASTM D 4538 : 2021 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
ASTM F 1546 : 2023 | Standard Specification for Fire Hose Nozzles |
ASTM D 6794 : 2020 : EDT 1 | Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6 h) Heating Time |
ASTM D 4282 : 2015 : R2022 | Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion |
ASTM D 6423 : 2020 : REV A | Standard Test Method for Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends |
ASTM D 6021 : 2022 | Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection |
ASTM D 8088 : 2016 : R2022 | Standard Practice for Determination of the Six Major Rare Earth Elements in Fluid Catalytic Cracking Catalysts, Zeolites, Additives, and Related Materials by Inductively Coupled Plasma Optical Emission Spectroscopy |
ASTM D 6480 : 2019 | Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Surface Loading by Transmission Electron Microscopy |
ASTM D 4456 : 2017 | Standard Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins |
ASTM F 3188 : 2016 : R2021 | Standard Specification for Extractable Hazardous Metals in Synthetic Turf Infill Materials |
ASTM D 5174 : 2023 | Standard Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry |
ASTM D 1743 : 2022 | Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases |
ASTM D 4742 : 2023 | Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT) |
ASTM B 368 : 2021 | Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) |
ASTM D 5768 : 2002 : R2022 | Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids |
ASTM G 100 : 1989 : R2021 | Standard Test Method for Conducting Cyclic Galvanostaircase Polarization |
ASTM G 60 : 2001 : R2018 | Standard Practice for Conducting Cyclic Humidity Exposures |
ASTM D 8422 : 2021 | Standard Practice for Pre-Stressing Terminal Point-of-Use Water Filters before Testing by Test Method F838 |
ASTM D 5095 : 1991 : R2022 | Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments |
ASTM D 5600 : 2022 | Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
ASTM D 3794 : 2022 | Standard Guide for Testing Coil Coatings |
ASTM F 1110 : 2009 : R2020 | Standard Test Method for Sandwich Corrosion Test |
ASTM E 2315 : 2023 | Standard Guide for Assessment of Antimicrobial Activity Using a Time-Kill Procedure |
ASTM D 3366 : 2018 | Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) |
ASTM D 4189 : 2023 | Standard Test Method for Silt Density Index (SDI) of Water |
ASTM E 1228 : 2023 | Standard Test Method for Assay of Peroxy Esters—Catalyzed Iodometric Procedure |
ASTM D 8063 : 2018 | Standard Test Method for Water in Purified Terephthalic Acid (PTA) by Volumetric Karl Fischer Titration |
ASTM D 6503 : 2024 | Standard Test Method for Enterococci in Water Using Enterolert |
ASTM C 1163 : 2014 : R2023 | Standard Practice for Mounting Actinides for Alpha Spectrometry Using Neodymium Fluoride |
ASTM D 8150 : 2022 | Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography |
ASTM D 1209 : 2005 : R2019 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
ASTM G 123 : 2000 : R2022 : EDT 1 | Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution |
ASTM D 5173 : 2015 : R2023 | Standard Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide |
ASTM D 5797 : 2021 | Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines |
ASTM F 326 : 2023 | Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes |
ASTM D 4487 : 1990 : R2020 | Standard Test Methods for Analysis of Calcium Borosilicate |
ASTM D 6328 : 2018 | Standard Guide for Quality Assurance Protocols for Chemical Analysis of Atmospheric Wet Deposition |
ASTM E 165/E165M : 2023 | Standard Practice for Liquid Penetrant Testing for General Industry |
ASTM D 7678 : 2017 : R2022 | Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy |
ASTM D 3557 : 2017 | Standard Test Methods for Cadmium in Water |
ASTM E 465 : 2024 | Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry |
ASTM C 1561 : 2010 : R2016 | Standard Guide for Determination of Plutonium and Neptunium in Uranium Hexafluoride and U-Rich Matrix by Alpha Spectrometry |
ASTM D 1653 : 2013 : R2021 | Standard Test Methods for Water Vapor Transmission of Organic Coating Films |
ASTM E 1821 : 2024 | Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography |
ASTM D 5317 : 2020 | Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector |
ASTM D 2420 : 2023 | Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method) |
ASTM D 3328 : 2006 : R2020 | Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography |
ASTM D 3651 : 2016 : R2021 : EDT 1 | Standard Test Method for Barium in Brackish Water, Seawater, and Brines |
ASTM D 717 : 1986 : R2020 | Standard Test Methods for Analysis of Magnesium Silicate Pigment |
ASTM D 1845 : 1986 : R2020 | Standard Test Methods for Chemical Analysis of Strontium Chromate Pigment |
ASTM B 456 : 2017 : R2022 | Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus<brk/> Chromium and Nickel Plus Chromium |
ASTM D 5673 : 2016 | Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry |
ASTM D 5245 : 2019 : R2024 | Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses |
ASTM E 1979 : 2021 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
ASTM G 198 : 2017 : R2023 | Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood |
ASTM D 2087 : 2022 | Standard Test Method for Iron in Formaldehyde Solutions |
ASTM D 4131 : 2019 : R2024 | Standard Practice for Sampling Fish with Rotenone |
ASTM D 2330 : 2020 | Standard Test Method for Methylene Blue Active Substances |
ASTM D 4548 : 2011 : R2019 | Standard Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins |
ASTM E 1235 : 2012 : R2020 : EDT 1 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft |
ASTM D 4310 : 2022 : REV A | Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils |
ASTM D 2340 : 2023 | Standard Test Method for Peroxides in Styrene Monomer |
ASTM D 6332 : 2012 : R2021 | Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors |
ASTM D 8402 : 2023 | Standard Practice for Development of Microplastic Reference Samples for Calibration and Proficiency Evaluation in All Types of Water Matrices with High to Low Levels of Suspended Solids |
ASTM B 995 : 2015 : REV A : R2021 | Standard Test Method for Chloride Resistance Test for Chromium Electroplated Parts (Russian Mud Test) |
ASTM D 2791 : 2019 | Standard Test Method for On-Line Determination of Sodium in Water |
ASTM C 1663 : 2024 | Standard Test Method for Measuring Waste Glass or Glass Ceramic Durability by Vapor Hydration Test |
ASTM D 7781 : 2023 | Standard Test Method for Nitrite-Nitrate in Water by Nitrate Reductase |
ASTM E 2362 : 2022 | Standard Practice for Evaluation of Pre-saturated or Impregnated Towelettes for Hard Surface Disinfection |
ASTM D 893 : 2014 : R2018 | Standard Test Method for Insolubles in Used Lubricating Oils |
ASTM D 2448 : 1985(R2019) | Standard Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the Leachate of the Pigment |
ASTM D 3792 : 2016 : R2022 | Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph |
ASTM D 5828 : 1997 : R2023 | Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates |
ASTM C 1816 : 2024 | Standard Practice for The Ion Exchange Separation of Small Volume Samples Containing Uranium, Americium, and Plutonium Prior to Isotopic Abundance and Content Analysis |
ASTM D 7503 : 2018 | Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils |
ASTM D 6188 : 2017 : R2022 | Standard Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall |
ASTM D 3869 : 2015 : R2023 | Standard Test Methods for Iodide and Bromide Ions in Brackish Water, Seawater, and Brines |
ASTM D 3335 : 1985 : REV A : R2020 | Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy |
ASTM D 8380 : 2021 | Standard Test Method for Dry Abrasion Resistance of Hydrophobic and Omniphobic Coatings |
ASTM E 1064 : 2024 | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
ASTM D 202 : 2023 | Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation |
ASTM D 5932 : 2020 | Standard Test Method for Determination of 2,4-Toluene Di<emph type="bdit">iso</emph >cyanate (2,4-TDI) and 2,6-Toluene Di<emph type="bdit">iso</emph>cyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace |
ASTM D 4940 : 2015 : R2020 | Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blast Cleaning Abrasives |
ASTM D 4337 : 1989 : R2017 | Standard Test Methods for Analysis of Linear Detergent Alkylates |
ASTM D 4763 : 2006 : R2020 | Standard Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy |
ASTM D 3864 : 2012 : R2021 | Standard Guide for On-Line Monitoring Systems for Water Analysis |
ASTM C 867 : 1994 : R2022 | Standard Test Method for Soluble Sulfate in Ceramic Whiteware Clays (Photometric Method) |
ASTM D 4458 : 2015 : R2023 | Standard Test Method for Chloride Ions in Brackish Water, Seawater, and Brines |
ASTM E 342 : 2024 | Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry |
ASTM D 1125 : 2023 | Standard Test Methods for Electrical Conductivity and Resistivity of Water |
ASTM D 3608 : 2019 | Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction |
ASTM E 222 : 2023 | Standard Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation |
ASTM D 3803 : 1991 : R2022 | Standard Test Method for Nuclear-Grade Activated Carbon |
ASTM E 3203 : 2024 : REV A | Standard Test Method for Determination of Lead by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) |
ASTM D 1607 : 1991 : R2018 : EDT 1 | Standard Test Method for Nitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction) |
ASTM E 2122 : 2022 | Standard Guide for Conducting In-situ Field Bioassays With Caged Bivalves |
ASTM C 1817 : 2016 | Standard Test Method for The Determination of the Oxygen to Metal (O/M) Ratio in Sintered Mixed Oxide ((U, Pu)O<inf>2</inf>) Pellets by Gravimetry |
ASTM D 4085 : 1993 : R2021 | Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry |
ASTM F 2109 : 2001 : R2022 | Standard Test Method to Determine Color Change and Staining Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard Surfaces |
ASTM D 3970 : 2005 : R2023 | Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination |
ASTM G 144 : 2001 : R2022 | Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer |
ASTM G 57 : 2020 | Standard Test Method for Measurement of Soil Resistivity Using the Wenner Four-Electrode Method |
ASTM D 6138 : 2023 : REV A | Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test) |
ASTM D 8192 : 2023 | Standard Test Method for Hardness in Colored and Colorless Water |
ASTM D 2162 : 2021 | Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards |
ASTM D 4198 : 2020 | Standard Test Methods for Evaluating Absorbent Pads Used with Membrane Filters for Bacteriological Analysis and Growth |
ASTM E 875 : 2020 | Standard Practice for Evaluation of Fungal Control Agents as Preservatives for Aqueous-Based Products Used in the Paper Industry |
ASTM D 6572 : 2021 | Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test |
ASTM E 439 : 2023 | Standard Test Methods for Chemical Analysis of Beryllium |
ASTM D 7133 : 2021 | Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids |
ASTM D 888 : 2018 | Standard Test Methods for Dissolved Oxygen in Water |
ASTM D 5919 : 1996 : R2022 | Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations |
ASTM E 1518 : 2005 : R2024 | Standard Practice for Evaluation of Physical Compatibility of Pesticides in Aqueous Tank Mixtures by the Dynamic Shaker Method |
ASTM E 2787 : 2021 | Standard Test Method for Determination of Thiodiglycol in Soil Using Pressurized Fluid Extraction Followed by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
ASTM D 4327 : 2017 | Standard Test Method for Anions in Water by Suppressed Ion Chromatography |
ASTM G 202 : 2012 : R2020 | Standard Test Method for Using Atmospheric Pressure Rotating Cage |
ASTM D 3270 : 2013 : R2021 | Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method) |
ASTM C 1012/C1012M : 2024 | Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution |
ASTM C 781 : 2020 | Standard Practice for Testing Graphite Materials for Gas-Cooled Nuclear Reactor Components |
ASTM D 2570 : 2024 | Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants |
ASTM D 5145 : 2009 : R2021 | Standard Test Methods for Nonvolatile and Pigment Content of Electrocoat Baths |
ASTM D 852 : 2024 | Standard Test Method for Solidification Point of Benzene |
ASTM D 4185 : 2023 | Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry |
ASTM D 4213 : 2024 | Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss |
ASTM D 5401 : 2003 : R2022 | Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood |
ASTM D 5910 : 2005 : R2019 | Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography |
ASTM D 5049 : 2023 | Standard Practice for Screening of Cyanides in Waste |
ASTM D 7191 : 2024 | Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor |
ASTM D 5905 : 1998 : R2018 | Standard Practice for the Preparation of Substitute Wastewater |
ASTM B 733 : 2022 | Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal |
ASTM D 7574 : 2023 | Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry |
ASTM D 8025 : 2023 | Standard Test Method for Determination of Select Pesticides in Water by Multiple Reaction Monitoring Liquid Chromatography Tandem Mass Spectrometry |
ASTM E 1835 : 2014 : R2022 | Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry |
ASTM D 7485 : 2023 | Standard Test Method for Determination of Nonylphenol, <emph type="bdit">p-tert</emph >-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry |
ASTM D 7590 : 2022 | Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry |
ASTM D 1123 : 2022 : REV A | Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
ASTM F 316 : 2003(R2019) | Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test |
ASTM D 1782 : 2017 | Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials |
ASTM D 3237 : 2022 | Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy |
ASTM F 3306 : 2019 | Standard Test Method for Ion Release Evaluation of Medical Implants |
ASTM D 7599 : 2016 : R2024 | Standard Test Method for Determination of Diethanolamine, Triethanolamine, <emph type="ital">N</emph>-Methyldiethanolamine and <emph type="ital">N</emph >-Ethyldiethanolamine in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
ASTM D 3912 : 2010 : R2023 | Standard Test Method for Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants |
ASTM D 6363 : 2020 | Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method |
ASTM D 5984 : 2023 | Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration |
ASTM D 4481 : 2021 | Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts |
ASTM D 3168 : 1985 : R2022 | Standard Practice for Qualitative Identification of Polymers in Emulsion Paints |
ASTM E 1070 : 2017 : REV A | Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry |
ASTM D 4017 : 2022 | Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method |
ASTM D 4861 : 2023 | Standard Practice for Sampling and Selection of Analytical Techniques for Pesticides and Polychlorinated Biphenyls in Air |
ASTM D 4661 : 2023 | Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates |
ASTM D 7994 : 2017 | Standard Test Method for Total Fluorine, Chlorine, and Sulfur in Liquid Petroleum Gas (LPG) by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC) |
ASTM F 22 : 2021 | Standard Test Method for Hydrophobic Surface Films by the Water-Break Test |
ASTM D 2700 : 2024 : REV B | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM G 93/G93M : 2019 | Standard Guide for Cleanliness Levels and Cleaning Methods for Materials and Equipment Used in Oxygen-Enriched Environments |
ASTM D 858 : 2017 | Standard Test Methods for Manganese in Water |
ASTM D 3120 : 2008 : R2019 | Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry |
ASTM D 7961 : 2022 | Standard Practice for Calibrating U-tube Density Cells over Large Ranges of Temperature and Pressure |
ASTM D 5865/D5865M : 2019 | Standard Test Method for Gross Calorific Value of Coal and Coke |
ASTM E 3273 : 2021 | Standard Practice to Assess Microbial Decontamination of Indoor Air using an Aerobiology Chamber |
ASTM D 6284 : 2017 : R2023 | Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine |
ASTM D 2777 : 2021 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM D 5153 : 2022 | Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption Spectrophotometry |
ASTM C 968 : 2019 | Standard Test Methods for Analysis of Sintered Gadolinium Oxide-Uranium Dioxide Pellets |
ASTM D 3326 : 2007 : R2024 | Standard Practice for Preparation of Samples for Identification of Waterborne Oils |
ASTM D 7098 : 2021 | Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B |
ASTM E 2242 : 2021 | Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure |
ASTM C 1128 : 2023 | Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials |
ASTM D 6385 : 2022 | Standard Test Method for Determining Acid-Extractable Content in Activated Carbon by Ashing |
ASTM D 8045 : 2017 : R2023 | Standard Test Method for Acid Number of Crude Oils and Petroleum Products by Catalytic Thermometric Titration |
ASTM E 1587 : 2017 | Standard Test Methods for Chemical Analysis of Refined Nickel |
ASTM D 3861 : 2022 | Standard Test Method for Quantity of Water-Extractable Matter in Membrane Filters |
ASTM G 37 : 1998 : R2021 | Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress-Corrosion Cracking Susceptibility of Copper-Zinc Alloys |
ASTM D 4638 : 2016 : R2023 | Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis |
ASTM D 1977 : 2022 | Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis |
ASTM D 3590 : 2017 | Standard Test Methods for Total Kjeldahl Nitrogen in Water |
ASTM E 449 : 2018 | Standard Test Methods for Analysis of Calcium Chloride |
ASTM D 5246 : 2024 | Standard Test Method for Isolation and Enumeration of <emph type="ital">Pseudomonas aeruginosa</emph> from Water |
ASTM C 452 : 2021 | Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate |
ASTM E 723 : 2024 | Standard Practice for Evaluation of Antimicrobials as Preservatives for Aqueous-Based Products Used in the Paper Industry (Bacterial Spoilage) |
ASTM D 4929 : 2024 | Standard Test Method for Determination of Organic Chloride Content in Crude Oil |
ASTM D 7283 : 2017 | Standard Test Method for Alpha and Beta Activity in Water By Liquid Scintillation Counting |
ASTM D 4128 : 2018 | Standard Guide for Identification and Quantitation of Organic Compounds in Water by Combined Gas Chromatography and Electron Impact Mass Spectrometry |
ASTM C 1871 : 2022 | Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer |
ASTM G 110 : 1992 : R2022 : EDT 2 | Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution |
ASTM D 1245 : 2017 | Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy |
ASTM E 507 : 2021 | Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry |
ASTM D 4517 : 2015 : R2023 | Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy |
ASTM E 2042/E2042M : 2009 : R2021 | Standard Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms |
ASTM D 8333 : 2020 | Standard Practice for Preparation of Water Samples with High, Medium, or Low Suspended Solids for Identification and Quantification of Microplastic Particles and Fibers Using Raman Spectroscopy, IR Spectroscopy, or Pyrolysis-GC/MS |
ASTM D 3546 : 2005 : R2019 | Standard Test Method for Formic Acid in Glacial Acetic Acid |
ASTM D 6301 : 2021 | Standard Practice for Collection of On-Line Composite Samples of Suspended Solids and Ionic Solids in Process Water |
ASTM C 1875 : 2018 : R2024 | Standard Practice for Determination of Major and Minor Elements in Aqueous Pore Solutions of Cementitious Pastes by Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) |
ASTM D 3977 : 1997 : R2019 | Standard Test Methods for Determining Sediment Concentration in Water Samples |
ASTM D 3987 : 2012 : R2020 | Standard Practice for Shake Extraction of Solid Waste with Water |
ASTM D 6489 : 1999 : R2020 | Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating |
ASTM B 604 : 2024 | Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics |
ASTM D 7597 : 2016 : R2024 | Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liquid Chromatography/Tandem Mass Spectrometry |
ASTM E 50 : 2024 | Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials |
ASTM D 3624 : 1985 : REV A : R2022 | Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy |
ASTM G 186 : 2005 : R2021 | Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys |
ASTM D 7881 : 2020 : EDT 1 | Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Reverse Voltage Mode |
ASTM E 2295 : 2021 | Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels |
ASTM D 3645 : 2015 : R2023 | Standard Test Methods for Beryllium in Water |
ASTM D 1291 : 2017 : R2023 | Standard Practice for Estimation of Chlorine Demand of Water |
ASTM B 154 : 2016 : R2022 | Standard Test Method for Mercurous Nitrate Test for Copper Alloys |
ASTM D 1401 : 2021 | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
ASTM D 1971 : 2016 : R2021 : EDT 1 | Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry |
ASTM D 2272 : 2022 | Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel |
ASTM D 7572 : 2015 : R2022 | Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil |
ASTM C 759 : 2018 | Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions |
ASTM D 6331 : 2024 | Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method) |
ASTM D 6569 : 2023 | Standard Test Method for On-Line Measurement of pH |
ASTM D 8459 : 2023 | Standard Test Methods for Detecting Water Soluble Sulfates in Construction Soils |
ASTM D 4194 : 2023 | Standard Test Methods for Operating Characteristics of Reverse Osmosis and Nanofiltration Devices |
ASTM D 8301 : 2021 | Standard Test Method for Determination of the Content of Nitroxide Radical (4-Hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl) in Butadiene, Styrene and Isoprene by Cyclic Voltammetry Method |
ASTM D 4785 : 2020 | Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water |
ASTM D 4793 : 2009 : R2023 | Standard Test Method for Sequential Batch Extraction of Waste with Water |
ASTM G 31 : 2021 | Standard Guide for Laboratory Immersion Corrosion Testing of Metals |
ASTM E 1366 : 2023 | Standard Practice for Standardized Aquatic Microcosms: Fresh Water |
ASTM D 7923 : 2019 | Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration |
ASTM G 41 : 2024 | Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment |
ASTM D 3370 : 2018 | Standard Practices for Sampling Water from Flowing Process Streams |
ASTM D 943 : 2020 | Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils |
ASTM D 5996 : 2016 | Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography |
ASTM E 2823 : 2017 | Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based) |
ASTM D 3598 : 1989 : R2016 | Standard Test Method for Citrate in Synthetic Detergents |
ASTM D 1844 : 1986 : R2020 | Standard Test Methods for Chemical Analysis of Basic Lead Silicochromate |
ASTM G 61 : 1986 : R2024 | Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys |
ASTM D 5794 : 1995 : R2021 | Standard Guide for Determination of Anions in Cathodic Electrocoat Permeates by Ion Chromatography |
ASTM E 711 : 2023 : EDT 1 | Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter |
ASTM D 8528 : 2024 | Standard Test Method for Determination of Fluoride and Glycol Degradation Products in Engine Coolants by Ion Chromatography |
ASTM E 1473 : 2022 | Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys |
ASTM E 2866 : 2021 | Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid, and Pinacolyl Methylphosphonic Acid in Soil by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry |
ASTM D 3891 : 2023 | Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products |
ASTM F 2832 : 2011 : R2021 | Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners |
ASTM G 121 : 2018 | Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents |
ASTM D 6647 : 2018 : R2024 | Standard Test Method for Determination of Acid Soluble Iron via Atomic Absorption |
ASTM F 862 : 2011 : R2022 | Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids |
ASTM D 7284 : 2020 | Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection |
ASTM G 72/G72M : 2024 | Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment |
ASTM D 7334 : 2008 : R2022 | Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement |
ASTM D 6845 : 2022 | Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area |
ASTM D 1293 : 2018 | Standard Test Methods for pH of Water |
ASTM F 519 : 2023 | Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments |
ASTM D 5806 : 1995 : R2017 | Standard Test Method for Disinfectant Quaternary Ammonium Salts by Potentiometric Titration |
ASTM E 2193 : 2023 | Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry) |
ASTM D 3988 : 2005 : R2023 | Standard Test Method for Vanadium in Paint Driers by EDTA Method |
ASTM D 1135 : 1986 : R2020 | Standard Test Methods for Chemical Analysis of Blue Pigments |
ASTM D 7598 : 2016 : R2024 | Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry |
ASTM D 5969 : 2021 | Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments |
ASTM D 2274 : 2014 : R2019 | Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method) |
ASTM D 3682 : 2021 | Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes by Atomic Spectrometry |
ASTM D 5196 : 2006 : R2018 | Standard Guide for Bio-Applications Grade Water |
ASTM D 7946 : 2019 | Standard Test Method for Initial pH (i-pH)-Value of Petroleum Products |
ASTM D 2913 : 2020 | Standard Test Method for Mercaptan Content of the Atmosphere |
ASTM E 1615 : 2022 | Standard Test Method for Determination of Trace Quantities of Iron by Visible Spectrophotometry |
ASTM D 2711 : 2022 | Standard Test Method for Demulsibility Characteristics of Lubricating Oils |
ASTM C 1904 : 2022 | Standard Test Methods for Determination of the Effects of Biogenic Acidification on Concrete Antimicrobial Additives and/or Concrete Products |
ASTM D 5860 : 1995 : R2022 | Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens |
ASTM F 963 : 2023 | Standard Consumer Safety Specification for Toy Safety |
ASTM D 5776 : 2021 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration |
ASTM D 6795 : 2019 : REV A : EDT 1 | Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 min) Heating Time |
ASTM E 359 : 2017 | Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate) |
ASTM D 4584 : 2005 : R2022 | Standard Test Method for Measuring Apparent pH of Electrocoat Baths |
ASTM G 108 : 2023 | Standard Test Methods for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels |
ASTM D 1726 : 2011 : R2019 | Standard Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins |
ASTM D 8393 : 2021 | Standard Guide for Determination of Pore Volume of Powdered Catalysts and Catalyst Carriers by Water Adsorption |
ASTM E 350 : 2023 | Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron |
ASTM D 6329 : 1998 : R2023 | Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers |
ASTM D 4382 : 2018 | Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace |
ASTM E 2679 : 2022 | Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol by <brk />Non-Aqueous Potentiometric Titration |
ASTM E 1589 : 2021 | Standard Practice for Evaluation of First Aid Antiseptic Drug Products |
ASTM D 4107 : 2020 | Standard Test Method for Tritium in Drinking Water |
ASTM E 776 : 2023 | Standard Test Method for Determination of Forms of Chlorine in Refuse-Derived Fuel |
ASTM D 7882 : 2020 | Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Normal Voltage Mode |
ASTM C 1913 : 2021 | Standard Practice for Sampling Gaseous Uranium Hexafluoride Using Zeolite in Single-Use Destructive Assay Sampler |
ASTM D 7319 : 2022 | Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography |
ASTM D 8022 : 2020 | Standard Test Method for Roll Stability of Lubricating Grease in Presence of Water (Wet Roll Stability Test) |
ASTM D 1614 : 2009 : R2023 | Standard Test Method for Alkalinity in Acetone |
ASTM D 5316 : 1998 : R2024 | Standard Test Method for 1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane in Water by Microextraction and Gas Chromatography |
ASTM D 1176 : 2014 : R2019 | Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes |
ASTM E 1758 : 2024 | Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography |
ASTM D 6698 : 2024 | Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water |
ASTM D 6741 : 2010 : R2023 | Standard Test Methods for Silanes Used in Rubber Formulations<brk/>(bis-(triethoxysilylpropyl)sulfanes): Sulfur Content |
ASTM D 5392 : 2024 | Standard Test Method for Isolation and Enumeration of <emph type="bdit">Escherichia coli</emph> in Water by the Two-Step Membrane Filter Procedure |
ASTM E 1019 : 2024 | Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Combustion and Inert Gas Fusion Techniques |
ASTM C 1343 : 2016 | Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-ray Fluorescence |
ASTM D 1943 : 2020 | Standard Test Method for Alpha Particle Radioactivity of Water |
ASTM D 7011 : 2015 : R2019 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection |
ASTM D 2674 : 1972 : R2021 | Standard Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum |
ASTM D 6276 : 2019 | Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization |
ASTM C 696 : 2019 | Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets |
ASTM F 311 : 2008 : R2020 | Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters |
ASTM D 7742 : 2017 : R2024 | Standard Practice for Determination of Nonylphenol Polyethoxylates (NPnEO, 3 ≤ n ≤ 18) and Octylphenol Polyethoxylates (OPnEO, 2 ≤ n ≤ 12) in Water by Single Reaction Monitoring (SRM) Liquid Chromatography/ Tandem Mass Spectrometry (LC/MS/MS) |
ASTM D 6280 : 1998 : R2020 | Standard Specification for Zinc Phosphate Pigments |
ASTM D 2613 : 2001 : R2023 | Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method |
ASTM D 2284 : 2011 : R2019 | Standard Test Method for Acidity of Sulfur Hexafluoride |
ASTM D 3920 : 2018 | Standard Test Method for Strontium in Water |
ASTM D 7304 : 2022 : REV A | Standard Test Method for Determination of Denatonium Benzoate in Engine Coolant by HPLC |
ASTM A 90/A90M : 2021 | Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings |
ASTM D 5259 : 2024 | Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure |
ASTM D 8535 : 2023 | Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances (PFAS) in Soil/Biosolid Matrices by Solvent Extraction, Filtering, and Followed by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS) |
ASTM D 7668 : 2023 | Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method |
ASTM E 777 : 2023 | Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel |
ASTM D 909 : 2022 | Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline |
ASTM D 7677 : 2016 : R2023 | Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water |
ASTM G 69 : 2020 | Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys |
ASTM D 8469 : 2022 | Standard Test Method for Analysis of Multiple Elements in Cannabis Matrices by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) |
ASTM D 7730 : 2017 : R2024 | Standard Test Method for Determination of Dioctyl Sulfosuccinate in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
ASTM C 1234 : 2024 | Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations |
ASTM G 192 : 2008 : R2020 : EDT 1 | Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique |
ASTM D 8283 : 2019 | Standard Practice for Cleaning and Certification of Specially Prepared Canisters |
ASTM D 1686 : 2019 | Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale) |
ASTM D 2023 : 1989 : R2016 | Standard Test Method of Analysis for Sodium Toluene Sulfonate in Detergents |
ASTM E 1786 : 2017 : REV A | Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry |
ASTM C 1771 : 2019 | Standard Test Method for Determination of Boron, Silicon, and Technetium in Hydrolyzed Uranium Hexafluoride by Inductively Coupled Plasma—Mass Spectrometer After Removal of Uranium by Solid Phase Extraction |
ASTM E 1439 : 2012 : R2019 | Standard Guide for Conducting the Frog Embryo Teratogenesis Assay-Xenopus (FETAX) |
ASTM D 715 : 1986 : R2020 | Standard Test Methods for Analysis of Barium Sulfate Pigment |
ASTM E 1795 : 2020 : REV A | Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM E 354 : 2021 : EDT 1 | Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
ASTM G 48 : 2011 : R2020 : EDT 1 | Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution |
ASTM D 4252 : 1989 : R2017 | Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates |
ASTM D 4841 : 1988 : R2018 | Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents |
ASTM D 7795 : 2015 : R2022 : EDT 1 | Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration |
ASTM D 3160 : 2020 : REV A | Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (α–Methylstyrene) |
ASTM D 4642 : 2004 : R2016 | Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry |
ASTM E 3146 : 2024 | Standard Test Method for Determination of Carbonyls in Pyrolysis Bio-Oils by Potentiometric Titration |
ASTM D 6490 : 1999 : R2022 | Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels |
ASTM C 1580 : 2020 | Standard Test Method for Water-Soluble Sulfate in Soil |
ASTM C 799 : 2019 | Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions |
ASTM D 4625 : 2021 | Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F) |
ASTM D 3974 : 2009 : R2023 | Standard Practices for Extraction of Trace Elements from Sediments |
ASTM D 5615 : 2023 | Standard Practice for Operating Characteristics of Home Reverse Osmosis Devices |
ASTM D 3049 : 1989 : R2016 | Standard Test Method for Synthetic Anionic Ingredient by Cationic Titration |
ASTM D 8193 : 2018 | Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbon (TPH) in Water and Wastewater with Solvent Extraction Using Non-Dispersive Mid-IR Transmission Spectroscopy |
ASTM D 444 : 1988 : R2020 | Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow) |
ASTM D 5904 : 2002 : R2024 | Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection |
ASTM D 4208 : 2019 | Standard Test Method for Total Chlorine in Coal by the Oxygen Vessel Combustion/Ion Selective Electrode Method |
ASTM D 2510 : 2022 | Standard Test Method for Adhesion of Solid Film Lubricants |
ASTM E 291 : 2018 | Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) |
ASTM E 1644 : 2021 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
ASTM D 4323 : 2021 | Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance |
ASTM E 2913/E2913M : 2021 | Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples |
ASTM F 2661 : 2007 : R2022 | Standard Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer |
ASTM E 581 : 2017 : REV A : R2022 : EDT 1 | Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys |
ASTM C 1636 : 2022 | Standard Guide for Determination of Uranium-232 in Uranium Hexafluoride |
ASTM D 5284 : 2009 : R2023 | Standard Test Method for Sequential Batch Extraction of Waste with Acidic Extraction Fluid |
ASTM D 2982 : 2024 | Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils |
ASTM D 2959 : 1995 : R2017 | Standard Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants |
ASTM D 3558 : 2015 : R2023 | Standard Test Methods for Cobalt in Water |
ASTM D 1475 : 2013 : R2020 | Standard Test Method for Density of Liquid Coatings, Inks, and Related Products |
ASTM D 4453 : 2017 | Standard Practice for Handling of High Purity Water Samples |
ASTM D 3673 : 1989 : R2016 | Standard Test Methods for Chemical Analysis of Alpha Olefin Sulfonates |
ASTM D 1976 : 2020 | Standard Test Method for Elements in Water by Inductively-Coupled Plasma Atomic Emission Spectroscopy |
ASTM D 8126 : 2021 | Standard Test Method for Efficient Basicity Determination by Potentiometric Hydrochloric Acid Titration |
ASTM E 248 : 2020 | Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry |
ASTM C 1254 : 2018 | Standard Test Method for Determination of Uranium in Mineral Acids by X-Ray Fluorescence |
ASTM F 482 : 2009 : R2020 | Standard Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals |
ASTM E 506 : 2017 : REV A | Standard Test Method for Mercury in Liquid Chlorine |
ASTM D 5534 : 1994 : R2018 | Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids |
ASTM E 298 : 2017 : REV A | Standard Test Methods for Assay of Organic Peroxides |
ASTM D 3867 : 2016 : R2021 : EDT 1 | Standard Test Methods for Nitrite-Nitrate in Water |
ASTM D 7855/D7855M : 2013 : R2021 | Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation |
ASTM D 8010 : 2018 | Standard Test Method for Determination of Water Soluble Alkali Content in Coal |
ASTM D 1881 : 2024 | Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware |
ASTM D 7451 : 2021 | Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark-Ignition Engine Fuels |
ASTM D 8361 : 2020 | Standard Test Method for Total Organic Carbon in Water by Two Stage Wet Chemical Catalyzed Hydroxyl Radical Oxidation with Infra-Red Detection of Resulting Carbon Dioxide |
ASTM D 664 : 2024 | Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration |
ASTM D 6470 : 1999 : R2020 | Standard Test Method for Salt in Crude Oils (Potentiometric Method) |
ASTM D 3923 : 2023 | Standard Practices for Detecting Leaks in Reverse Osmosis and Nanofiltration Devices |
ASTM D 8375 : 2023 | Standard Test Method for Determination of Cannabinoid Concentration in Dried Cannabis and Hemp Raw Materials using Liquid Chromatography Tandem Mass Spectrometry (LC-MS/MS) |
ASTM C 1880 : 2019 | Standard Practice for Sampling Gaseous Uranium Hexafluoride using Alumina Pellets |
ASTM D 4981 : 2019 | Standard Practice for Screening of Oxidizers in Waste |
ASTM D 7168 : 2021 | Standard Test Method for <sup>99</sup>Tc in Water by Solid Phase Extraction Disk |
ASTM D 8155 : 2017 : R2023 | Standard Practice for Shake Extraction of Solid Mining and Metallurgical Processing Waste with Water |
ASTM G 51 : 2023 | Standard Test Method for Measuring pH of Soil for Use in Corrosion Evaluations |
ASTM D 3804 : 2002 : R2021 | Standard Test Method for Iron in Paint Driers by EDTA Method |
ASTM F 2075 : 2020 | Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment |
ASTM E 346 : 2024 | Standard Test Method for Analysis of Carbonizables in Methanol |
ASTM D 8478 : 2023 | Standard Test Method for N-Hexane Recoverable Total Oil and Grease and Total Petroleum Hydrocarbons in Water by ATR-Infrared Determination |
ASTM C 1346 : 2019 | Standard Practice for Dissolution of UF<inf>6</inf> from P-10 Tubes |
ASTM D 7716 : 2011 : REV A : R2024 | Standard Test Method for Determination of Residual Methanol in Glycerin by Gas Chromatography |
ASTM D 3427 : 2019 | Standard Test Method for Air Release Properties of Hydrocarbon Based Oils |
ASTM D 4445 : 2023 | Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method) |
ASTM E 1945 : 2021 | Standard Test Method for Percent Dispersibility |
ASTM D 5058 : 2012 : R2020 | Standard Practices for Compatibility of Screening Analysis of Waste |
ASTM D 500 : 1995 : R2023 | Standard Test Methods of Chemical Analysis of Sulfonated and Sulfated Oils |
ASTM D 4590 : 2022 | Standard Test Method for Colorimetric Determination of <emph type="ital">p-tert</emph >-Butylcatechol In Styrene Monomer or AMS (α–Methylstyrene) by Spectrophotometry |
ASTM D 8344 : 2024 | Standard Practice for Ammonium Bifluoride and Nitric Acid Digestion of Airborne Dust and Dust-Wipe Samples for the Determination of Metals and Metalloids |
ASTM E 2838 : 2021 | Standard Test Method for Determination of Thiodiglycol on Wipes by Solvent Extraction Followed by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
ASTM D 3050 : 2007 : R2024 | Standard Guide for Measuring Soil Removal from Artificially Soiled Fabrics (Not Suitable for Detergent Ranking) |
ASTM E 3171 : 2021 : REV A | Standard Test Method for Determination of Total Silver in Textiles by ICP-OES or ICP-MS Analysis |
ASTM D 7066 : 2004 : R2024 | Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination |
ASTM D 1278 : 1991 : REV A : R2020 | Standard Test Methods for Rubber from Natural Sources—Chemical Analysis |
ASTM C 1285 : 2021 | Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT) |
ASTM D 1045 : 2019 | Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics |
ASTM D 7237 : 2018 | Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection |
ASTM D 4972 : 2019 : R2024 : EDT 1 | Standard Test Methods for pH of Soils |
ASTM E 337 : 2015 : R2023 | Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
ASTM D 848 : 2023 | Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons |
ASTM D 565 : 2024 | Standard Test Method for Carbonizable Substances in White Mineral Oil |
ASTM D 5988 : 2018 | Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in Soil |
ASTM E 1899 : 2023 | Standard Test Method for Hydroxyl Groups Using Reaction with <emph type="ital">p</emph >-Toluenesulfonyl Isocyanate (TSI) and Potentiometric Titration with Tetrabutylammonium Hydroxide |
ASTM D 7315 : 2017 : R2023 | Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode |
ASTM D 8247 : 2019 | Standard Test Method for Determination of Total Fluorine and Total Chlorine in Coal by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection |
ASTM D 3603 : 2020 | Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method) |
ASTM E 463 : 2021 | Standard Test Method for Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrophotometry |
ASTM E 3283 : 2021 | Standard Practice for Preparation of Loose Radiological/Surrogate Contamination on Nonporous Test Coupon Surfaces for Evaluation of Decontamination Techniques |
ASTM D 6903 : 2007 : R2020 | Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water |
ASTM D 5463 : 2018 | Standard Guide for Use of Test Kits to Measure Inorganic Constituents in Water |
ASTM D 613 : 2024 | Standard Test Method for Cetane Number of Diesel Fuel Oil |
ASTM B 858 : 2006 : R2024 | Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys |
ASTM D 7464 : 2020 | Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing |
ASTM D 3228 : 2022 | Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method |
ASTM G 189 : 2007 : R2021 : EDT 1 | Standard Guide for Laboratory Simulation of Corrosion Under Insulation |
ASTM D 4399 : 2005 : R2023 | Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths |
ASTM C 1168 : 2023 | Standard Practice for Preparation and Dissolution of Plutonium Materials for Analysis |
ASTM D 6302 : 1998 : R2017 | Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins |
ASTM D 6357 : 2021 : REV B | Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively Coupled Plasma Mass Spectrometry, and Graphite Furnace Atomic Absorption Spectrometry |
ASTM E 738 : 2020 | Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by EDTA Complexometric Titrimetry |
ASTM D 4890 : 2024 | Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA (Platinum-Cobalt) Color of Polyols |
ASTM D 7638 : 2010 : R2021 | Standard Test Method for Determination of Fatty Acids and Esters in Glycerin |
ASTM D 7873 : 2022 : REV A | Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method) |
ASTM D 8005 : 2023 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
ASTM D 3268 : 1991 : R2018 | Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method) |
ASTM D 4084 : 2023 | Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) |
ASTM G 157 : 2024 | Standard Guide for Evaluating Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for Chemical Process Industries |
ASTM G 44 : 2021 | Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5 % Sodium Chloride Solution |
ASTM D 6234 : 2013 : R2020 | Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure |
ASTM D 5902 : 2005 : R2023 | Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value |
ASTM D 6520 : 2018 | Standard Practice for the Solid Phase Micro Extraction (SPME) of Water and its Headspace for the Analysis of Volatile and Semi-Volatile Organic Compounds |
ASTM F 3044 : 2020 | Standard Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants |
ASTM D 8083 : 2024 | Standard Test Method for Total Nitrogen, and Total Kjeldahl Nitrogen (TKN) by Calculation, in Water by High Temperature Catalytic Combustion and Chemiluminescence Detection |
ASTM D 6442 : 2006 : R2020 | Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water |
ASTM D 6586 : 2003 : R2021 | Standard Practice for the Prediction of Contaminant Adsorption on GAC in Aqueous Systems Using Rapid Small-Scale Column Tests |
ASTM B 380 : 1997 : R2023 | Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure |
ASTM D 7527 : 2024 | Standard Test Method for Measurement of Antioxidant Content in Lubricating Greases by Linear Sweep Voltammetry |
ASTM D 5864 : 2023 | Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components |
ASTM D 4547 : 2020 | Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds |
ASTM D 5232 : 2019 | Standard Practice for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material |
ASTM F 3293 : 2018 | Standard Guide for Application of Test Soils for the Validation of Cleaning Methods for Reusable Medical Devices |
ASTM C 1662 : 2024 | Standard Test Method for Measurement of the Dissolution Rate of Nuclear Waste Forms Using the Single-Pass Flow-Through Test Method |
ASTM D 1160 : 2024 | Standard Test Method for Distillation of Petroleum Products at Reduced Pressure |
ASTM D 7047 : 2023 | Standard Test Method for Swell Volume of Plantago Insularis (Ovata, Psyllium) |
ASTM D 7363 : 2013 : REV A : R2021 : EDT 1 | Standard Test Method for Determination of Parent and Alkyl Polycyclic Aromatics in Sediment Pore Water Using Solid-Phase Microextraction and Gas Chromatography/Mass Spectrometry in Selected Ion Monitoring Mode |
ASTM D 3483 : 2014 : R2022 | Standard Test Methods for Accumulated Deposition in a Steam Generator Tube |
ASTM D 8310 : 2020 | Standard Test Method for Analysis of Target Phenols (TPs) in Soil by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS) |
ASTM D 5863 : 2022 | Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry |
ASTM D 2036 : 2009 : R2022 | Standard Test Methods for Cyanides in Water |
ASTM D 8130 : 2017 : R2024 | Standard Test Method for Determination of Metals in Purified Terephthalic Acid (PTA) by Inductively Coupled Plasma Atomic Emission Spectrometric Method |
ASTM F 1977 : 2022 | Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System |
ASTM D 7365 : 2009 : REV A : R2022 | Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide |
ASTM D 3643 : 2015 : R2022 | Standard Test Method for Acid Number of Certain Alkali-Soluble Resins |
ASTM D 6810 : 2022 | Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry |
ASTM D 5257 : 2017 | Standard Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography |
ASTM C 1507 : 2020 | Standard Test Method for Radiochemical Determination of Strontium-90 in Soil |
ASTM D 4978 : 2016 | Standard Test Methods for Screening of Reactive Sulfides in Waste |
ASTM D 5175 : 1991 : R2024 | Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography |
ASTM D 5386 : 2024 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
ASTM D 3973 : 1985 : R2024 | Standard Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water |
ASTM C 1411 : 2020 | Standard Practice for The Ion Exchange Separation of Uranium and Plutonium Prior to Isotopic Analysis |
ASTM C 1284 : 2018 | Standard Practice for Electrodeposition of the Actinides for Alpha Spectrometry |
ASTM D 5044 : 2006 : R2021 | Standard Test Method for Rubber Compounding Materials—Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS) |
ASTM G 32 : 2016 : R2021 : EDT 1 | Standard Test Method for Cavitation Erosion Using Vibratory Apparatus |
ASTM D 4350 : 2016 : R2022 | Standard Test Method for Corrosivity Index of Plastics and Fillers |
ASTM D 2194 : 2022 | Standard Test Method for Concentration of Formaldehyde Solutions |
ASTM E 1963 : 2022 | Standard Guide for Conducting Terrestrial Plant Toxicity Tests |
ASTM D 3266 : 1991 : R2018 | Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method) |
ASTM D 3267 : 2020 | Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method) |
ASTM D 3450 : 2015 : R2020 | Standard Test Method for Washability Properties of Interior Architectural Coatings |
ASTM A 262 : 2015 : R2021 | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
ASTM D 4922 : 2021 | Standard Test Method for Determination of Radioactive Iron in Water |
ASTM F 34 : 2013 : R2023 | Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials |
ASTM D 5194 : 2024 : REV A | Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons |
ASTM D 4165 : 2006 : R2020 : EDT 1 | Standard Test Method for Cyanogen Chloride in Water |
ASTM C 1844 : 2016 | Standard Test Method for Determination of Uranium in Urine by Inductively Coupled Plasma Mass Spectrometer Following Nitric Acid Dilution |
ASTM D 6971 : 2022 | Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry |
ASTM C 758 : 2018 | Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal |
ASTM E 1116 : 2024 | Standard Test Method for Emulsification Characteristics of Pesticide Emulsifiable Concentrates |
ASTM E 1726 : 2021 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
ASTM G 34 : 2023 | Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test) |
ASTM E 363 : 2023 | Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium |
ASTM D 4052 : 2022 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
ASTM D 7614 : 2020 | Standard Test Method for Determination of Total Suspended Particulate (TSP) Hexavalent Chromium in Ambient Air Analyzed by Ion Chromatography (IC) and Spectrophotometric Measurements |
ASTM D 4045 : 2019 | Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry |
ASTM E 411 : 2024 | Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine |
ASTM D 1687 : 2017 | Standard Test Methods for Chromium in Water |
ASTM C 1868 : 2018 | Standard Practice for Ceramographic Preparation of UO<inf>2</inf> and Mixed Oxide (U,Pu)O<inf>2</inf> Pellets for Microstructural Analysis |
ASTM D 6562 : 2020 | Standard Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace |
ASTM D 167/D167M : 2021 : REV A | Standard Test Method for Apparent and True Specific Gravity and Porosity of Lump Coke |
ASTM D 612 : 1988 : R2017 | Standard Test Method for Carbonizable Substances in Paraffin Wax |
ASTM D 4018 : 2023 | Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows |
ASTM E 1834 : 2018 | Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry |
ASTM D 8273 : 2020 | Standard Practice for Determination of Total and Available Cyanide in Solid Waste and Soil after Alkaline Extraction |
ASTM E 2111 : 2012 : R2018 | Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemicals |
ASTM D 4291 : 2021 | Standard Test Method for Trace Ethylene Glycol in Used Engine Oil |
ASTM E 263 : 2018 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Iron |
ASTM D 4200 : 1982 : R2019 | Standard Test Method for Evaluating Inhibitory Effects of Ink Grids on Membrane Filters |
ASTM D 4952 : 2023 | Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test) |
ASTM E 321 : 2020 | Standard Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method) |
ASTM D 7342 : 2020 | Standard Test Method for Prolonged Worked Stability of Lubricating Grease in Presence of Water (Water Stability Test) |
ASTM D 1534 : 1995 : R2017 | Standard Test Method for Approximate Acidity in Electrical Insulating Liquids by Color-Indicator Titration |
ASTM D 5608 : 2016 | Standard Practices for Decontamination of Sampling and Non Sample Contacting Equipment Used at Low Level Radioactive Waste Sites |
ASTM D 5827 : 2022 | Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography |
ASTM E 2941 : 2021 | Standard Practices for Extraction of Elements from Ores and Related Metallurgical Materials by Acid Digestion |
ASTM E 224 : 2023 | Standard Test Methods for Analysis of Hydrochloric Acid |
ASTM D 5086 : 2020 | Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry |
ASTM D 2035 : 2019 | Standard Practice for Coagulation-Flocculation Jar Test of Water |
ASTM D 5810 : 1996 : R2021 | Standard Guide for Spiking into Aqueous Samples |
ASTM D 3635 : 2013 : R2021 | Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry |
ASTM C 1832 : 2023 | Standard Test Method for Determination of Uranium Isotopic Composition by Modified Total Evaporation (MTE) Method Using Thermal Ionization Mass Spectrometer |
ASTM G 127 : 2015 : R2023 | Standard Guide for the Selection of Cleaning Agents for Oxygen-Enriched Systems |
ASTM D 8149 : 2020 | Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants |
ASTM D 8087 : 2018 | Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) Using Tristimulus Colorimetry |
ASTM D 49 : 1983 : R2020 | Standard Test Methods of Chemical Analysis of Red Lead |
ASTM D 283 : 2013 : R2019 | Standard Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments |
ASTM D 7933 : 2022 | Standard Test Method for Engine Coolant Stagnation in Flux-Brazed Aluminum Heat Exchangers |
ASTM D 7573 : 2018 : REV A : EDT 1 | Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection |
ASTM E 1883 : 2024 | Standard Practice for Assessment of an Antibacterial Handwash Product by Multiple Basin Wash Technique |
ASTM D 4563 : 2002 : R2022 | Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint |
ASTM E 1584 : 2023 | Standard Test Method for Assay of Nitric Acid |
ASTM D 5836 : 2020 | Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method) |
ASTM D 6281 : 2023 | Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM) |
ASTM D 2973 : 2023 | Standard Test Method for Total Nitrogen in Peat Materials |
ASTM D 3695 : 1995 : R2021 : EDT 1 | Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography |
ASTM E 3409 : 2024 | Standard Test Method for Analysis of Liposomal Drug Formulations Using Multidetector Asymmetrical-Flow Field-Flow Fractionation |
ASTM E 2371 : 2021 : REV A | Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) |
ASTM D 7577 : 2012 : R2021 | Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends |
ASTM C 1463 : 2019 | Standard Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis |
ASTM D 521 : 2002 : R2019 | Standard Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder) |
ASTM D 153 : 1984 : R2020 | Standard Test Methods for Specific Gravity of Pigments |
ASTM D 6143 : 2023 | Standard Test Method for Iron Content of Bisphenol A (4,4<emph type="bdit">′</emph > - Isopropylidenediphenol) |
ASTM D 6081 : 2022 | Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation |
ASTM D 7328 : 2023 | Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection |
ASTM D 5198 : 2017 : R2024 | Standard Practice for Nitric Acid Digestion of Solid Waste |
ASTM E 2409 : 2020 : REV A | Standard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol and in Mono- and Dipropylene Glycol<brk/>(Gas Chromatographic Method) |
ASTM D 5530 : 2022 | Standard Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry |
ASTM D 2247 : 2015 : R2020 : EDT 1 | Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity |
ASTM D 501 : 2003 : R2023 | Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents |
ASTM E 247 : 2021 | Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry |
ASTM D 7658 : 2017 : R2021 | Standard Test Method for Direct Microscopy of Fungal Structures from Tape |
ASTM D 1266 : 2018 | Standard Test Method for Sulfur in Petroleum Products (Lamp Method) |
ASTM D 1498 : 2014 : R2022 : EDT 1 | Standard Test Method for Oxidation-Reduction Potential of Water |
ASTM D 5891/D5891M : 2019 | Standard Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners |
ASTM D 4012 : 2023 : REV A | Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water |
ASTM D 3871 : 1984 : R2024 | Standard Test Method for Purgeable Organic Compounds in Water Using Headspace Sampling |
ASTM C 146 : 2021 | Standard Test Methods for Chemical Analysis of Glass Sand |
ASTM D 4698 : 2021 | Standard Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals |
ASTM D 8385 : 2022 | Standard Test Method for Dry Filterability of Lubricants and Hydraulic Fluids by Mass Flow Technique |
ASTM E 299 : 2017 : REV A | Standard Test Method for Trace Amounts of Peroxides In Organic Solvents |
ASTM D 470 : 2021 | Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable |
ASTM D 7261 : 2022 | Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer |
ASTM C 1109 : 2023 | Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectroscopy |
ASTM C 698 : 2016 | Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O<inf>2</inf>) |
ASTM D 2191 : 2022 | Standard Test Method for Acetaldehyde Content of Vinyl Acetate |
ASTM D 5004 : 2023 | Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement |
ASTM D 859 : 2016 : R2021 : EDT 1 | Standard Test Method for Silica in Water |
ASTM G 97 : 2018 : R2022 | Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications |
ASTM D 1617 : 2022 | Standard Test Method for Ester Value of Solvents and Thinners |
ASTM D 8591 : 2024 | Standard Test Method for Determination of Fluorotelomer Alcohols in Test Chamber Air by Thermal Desorption-Gas Chromatography-Triple Quadrupole Tandem Mass Spectrometry (TD-GC-MS/MS) |
ASTM G 129 : 2021 | Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking |
ASTM D 5012 : 2020 | Standard Practice for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition |
ASTM D 6691 : 2024 : REV A | Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum |
ASTM E 1022 : 2022 | Standard Guide for Conducting Bioconcentration Tests with Fishes and Saltwater Bivalve Mollusks |
ASTM D 1067 : 2016 | Standard Test Methods for Acidity or Alkalinity of Water |
ASTM C 1287 : 2018 | Standard Test Method for Determination of Impurities in Nuclear Grade Uranium Compounds by Inductively Coupled Plasma Mass Spectrometry |
ASTM D 3048 : 1989 : R2016 | Standard Test Method of Assay for Alkaline Protease |
ASTM D 871 : 1996 : R2019 | Standard Test Methods of Testing Cellulose Acetate |
ASTM D 4274 : 2023 | Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols |
ASTM D 2180 : 2017 | Standard Test Method for Active Oxygen in Bleaching Compounds |
ASTM E 1115 : 2024 | Standard Test Method for Evaluation of Surgical Hand Scrub Formulations |
ASTM E 278 : 2021 | Standard Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry |
ASTM F 21 : 2020 | Standard Test Method for Hydrophobic Surface Films by the Atomizer Test |
ASTM C 1415 : 2018 | Standard Test Method for <sup>238</sup>Pu Isotopic Abundance By Alpha Spectrometry |
ASTM C 1111 : 2010 : R2020 | Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
ASTM D 5085 : 2021 | Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Suppressed Ion Chromatography |
ASTM D 1735 : 2021 | Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus |
ASTM D 8084 : 2017 | Standard Test Method for Photoelectrochemical Oxygen Demand of Freshwater Sources for Drinking Water Treatment Plants and Treated Drinking Water |
ASTM D 6217 : 2021 | Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration<rangeref></rangeref > |
ASTM D 5513 : 2022 | Standard Practice for Microwave Digestion of Industrial Furnace Feed Streams and Waste for Trace Element Analysis |
ASTM D 8399 : 2023 | Standard Test Method for Multi-residue Analysis of Pesticides in Dried Cannabis and Hemp Raw Materials Using Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) |
ASTM D 3280 : 1985 : R2020 | Standard Test Methods for Analysis of White Zinc Pigments |
ASTM D 1426 : 2015 : R2021 : EDT 1 | Standard Test Methods for Ammonia Nitrogen In Water |
ASTM D 4450 : 1985 : R2019 | Standard Test Method for Analysis of Zinc Hydroxy Phosphite Pigment |
ASTM D 8516 : 2023 | Standard Test Method for Quantification of Culturable Waterborne Bacteria Using a Defined Culture Medium Coated Plate |
ASTM D 3231 : 2024 | Standard Test Method for Phosphorus in Gasoline |
ASTM D 4266 : 2017 | Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins |
ASTM D 5011 : 2017 | Standard Practices for Calibration of Ozone Monitors Using Transfer Standards |
ASTM D 1072 : 2023 | Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration |
ASTM D 934 : 2022 | Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction |
ASTM D 4834 : 2003 : R2021 | Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy |
ASTM G 106 : 1989 : R2023 | Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements |
ASTM D 8194 : 2024 | Standard Practice for Evaluation of Suitability of 37 mm Filter Monitors and 47 mm Filters Used to Determine Particulate Contaminant in Aviation Turbine Fuels |
ASTM E 778 : 2015 : R2021 | Standard Test Methods for Nitrogen in Refuse-Derived Fuel Analysis Samples |
ASTM C 1524 : 2020 | Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method) |
ASTM D 3087 : 2017 | Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal |
ASTM G 187 : 2023 | Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method |
ASTM G 1 : 2003 : R2017 : EDT 1 | Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens |
ASTM D 1688 : 2017 | Standard Test Methods for Copper in Water |
ASTM D 5412 : 1993 : R2024 | Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water |
ASTM D 1093 : 2023 | Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues |
ASTM D 7295 : 2018 | Standard Practice for Sampling Combustion Effluents and Other Stationary Sources for the Subsequent Determination of Hydrogen Cyanide |
ASTM D 7262 : 2023 | Standard Test Methods for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids |
ASTM G 142 : 1998 : R2022 | Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both |
ASTM D 7622 : 2020 | Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction |
ASTM G 67 : 2024 : REV A | Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test) |
ASTM D 8567 : 2024 | Standard Test Method for Analysis of Engine Coolant for Organic Additives by High Performance Liquid Chromatograph |
ASTM D 3644 : 2015 : R2022 | Standard Test Method for Acid Number of Styrene-Maleic Anhydride Resins |
ASTM D 6890 : 2022 | Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber |
ASTM D 8456 : 2022 | Standard Test Method for Determination of Nitrosamines in Water by Liquid Chromatography Tandem Mass Spectrometry (LC-MS/MS) |
ASTM D 2914 : 2015 : R2022 | Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method) |
ASTM C 1022 : 2017 : R2022 | Standard Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate |
ASTM E 3324 : 2022 | Standard Test Method for Lipid Quantitation in Liposomal Formulations Using Ultra-High-Performance Liquid Chromatography (UHPLC) with Triple Quadrupole Mass Spectrometry (TQMS) |
ASTM D 7458 : 2021 | Standard Test Method for Determination of Beryllium in Soil and Sediment Using Ammonium Bifluoride Extraction and Fluorescence Detection |
ASTM D 4196 : 2005 : R2019 | Standard Test Method for Confirming the Sterility of Membrane Filters |
ASTM D 1722 : 2009 : R2023 | Standard Test Method for Water Miscibility of Water-Soluble Solvents |
ASTM F 302 : 2009 : R2021 | Standard Practice for Field Sampling of Aerospace Fluids in Containers |
ASTM E 536 : 2023 | Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys |
ASTM D 5811 : 2020 | Standard Test Method for Strontium-90 in Water |
ASTM A 428/A428M : 2021 | Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles |
ASTM D 3863 : 2022 | Standard Test Method for Retention Characteristics of 0.40 to 0.45 μm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality |
ASTM G 66 : 2023 | Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test) |
ASTM D 5176 : 2020 | Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection |
ASTM D 8183 : 2022 | Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method |
ASTM D 7358 : 2007 : R2018 | Standard Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit |
ASTM D 3866 : 2018 | Standard Test Methods for Silver in Water |
ASTM C 1432 : 2023 | Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis |
ASTM D 2976 : 2022 : REV A | Standard Test Method for pH of Peat Materials |
ASTM C 1205 : 2020 | Standard Test Method for The Radiochemical Determination of Americium-241 in Soil by Alpha Spectrometry |
ASTM D 4289 : 2024 : REV A | Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids |
ASTM G 35 : 2023 | Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids |
ASTM D 2332 : 2013 : R2021 | Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence |
ASTM D 4828 : 1994 : R2020 | Standard Test Methods for Practical Washability of Organic Coatings |
ASTM D 2364 : 2015 : R2021 | Standard Test Methods for Hydroxyethylcellulose |
ASTM D 7820 : 2019 : R2024 | Standard Test Method for Engine Coolant Corrosion Protection Under Accelerated Thermal and Oxidizing Conditions Using a Rotating Pressure Vessel |
ASTM E 367 : 2022 | Standard Test Methods for Chemical Analysis of Ferroniobium |
ASTM G 91 : 2011 : R2018 | Standard Practice for Monitoring Atmospheric SO<inf>2</inf> Deposition Rate for Atmospheric Corrosivity Evaluation |
ASTM D 870 : 2015 : R2020 : EDT 1 | Standard Practice for Testing Water Resistance of Coatings Using Water Immersion |
ASTM D 365 : 2023 | Standard Guide for Soluble Nitrocellulose Base Solutions |
ASTM D 3860 : 1998 : R2020 | Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique |
ASTM C 1347 : 2008 : R2023 | Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis |
ASTM D 7883 : 2020 | Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Weak Anion Exchange High Performance Liquid Chromatography |
ASTM D 5907 : 2018 | Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water |
ASTM E 202 : 2024 | Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols |
ASTM D 7979 : 2020 | Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances in Water, Sludge, Influent, Effluent, and Wastewater by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS) |
ASTM A 1032 : 2015(R2019) | Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used for Prestressed Concrete Pipe |
ASTM G 209 : 2014 : R2022 | Standard Practice for Detecting mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys |
ASTM E 1719 : 2024 | Standard Test Method for Vapor Pressure of Liquids by Ebulliometry |
ASTM D 1218 : 2021 | Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids |
ASTM D 5029 : 1998 : R2020 | Standard Test Method for Water Solubles in Activated Carbon |
ASTM B 1019 : 2021 | Standard Test Method for Determination of Surface Oxides on Copper Rod<brk/>(for Electrical Purposes) |
ASTM D 1159 : 2023 | Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration |
ASTM D 8457 : 2024 | Standard Practice for Cleaning Glass and Plastic Labware Used in Metal and Metalloid Analyses |
ASTM D 8277 : 2020 | Standard Test Method for Wet Filterability of Lubricants and Hydraulic Fluids by Mass Flow Technique |
ASTM D 1301 : 1991 : R2020 | Standard Test Methods for Chemical Analysis of White Lead Pigments |
ASTM C 1797 : 2023 : REV A | Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete |
ASTM D 3718 : 1985 : REV A : R2022 : EDT 1 | Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy |
ASTM D 5051 : 2006 : R2021 : EDT 1 | Standard Test Method for Rubber Compounding Materials—Benzothiazyl Disulfide (MBTS)—Assay |
ASTM F 451 : 2021 | Standard Specification for Acrylic Bone Cement |
ASTM D 1783 : 2001 : R2020 | Standard Test Methods for Phenolic Compounds in Water |
ASTM D 7575 : 2011 : R2024 | Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination |
ASTM D 5127 : 2013 : R2018 | Standard Guide for Ultra-Pure Water Used in the Electronics and Semiconductor Industries |
ASTM D 5015 : 2015 : R2022 | Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination |
ASTM E 1731 : 2011 : R2018 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves |
ASTM D 3986 : 2017 | Standard Test Method for Barium in Brines, Seawater, and Brackish Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy |
ASTM D 2331 : 2008 : R2022 | Standard Practices for Preparation and Preliminary Testing of Water-Formed Deposits |
ASTM D 8024 : 2023 | Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Water by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS) |
ASTM D 94 : 2007 : R2017 | Standard Test Methods for Saponification Number of Petroleum Products |
ASTM G 168 : 2017 | Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens |
ASTM D 6304 : 2020 | Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration |
ASTM E 1295 : 2022 | Standard Guide for Conducting Three-Brood, Renewal Toxicity Tests with <emph type="ital">Ceriodaphnia dubia</emph> |
ASTM D 7731 : 2017 : R2024 | Standard Test Method for Determination of Dipropylene Glycol Monobutyl Ether and Ethylene Glycol Monobutyl Ether in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
ASTM E 393 : 2019 | Standard Test Method for Measuring Reaction Rates by Analysis of Barium-140 From Fission Dosimeters |
ASTM D 5056 : 2022 | Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption |
ASTM D 513 : 2016 | Standard Test Methods for Total and Dissolved Carbon Dioxide in Water |
ASTM C 809 : 2024 | Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and Aluminum<brk/>Oxide-Boron Carbide Composite Pellets |
ASTM D 7903 : 2014 : R2020 | Standard Practice for Determining the Capacity of Oxygen Removal Ion Exchange Cartridges |
ASTM D 5263 : 2023 | Standard Test Method for Determining the Relative Degree of Oxidation in Bituminous Coal by Alkali Extraction |
ASTM D 5848 : 2020 | Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings |
ASTM D 4662 : 2020 | Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols |
ASTM E 200 : 2023 | Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis |
ASTM E 2824 : 2023 | Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetry |
ASTM F 2529 : 2013 : R2021 | Standard Guide for <emph type="ital"> in vivo</emph> Evaluation of Osteoinductive Potential for Materials Containing Demineralized Bone (DBM) |
ASTM D 4928 : 2012 : R2018 | Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration |
ASTM D 5184 : 2022 | Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry |
ASTM D 820 : 1993 : R2023 | Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents |
ASTM D 6414 : 2023 | Standard Test Methods for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction or Wet Oxidation/Cold Vapor Atomic Absorption |
ASTM D 7603 : 2023 | Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils |
ASTM C 1567 : 2023 | Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method) |
ASTM D 5155 : 2019 | Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates |
ASTM D 2010/D2010M : 1998 : R2017 | Standard Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique |
ASTM D 7035 : 2021 | Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
ASTM D 3376 : 2018 | Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation |
ASTM D 1318 : 2023 | Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method) |
ASTM D 8032 : 2020 | Standard Test Method for Acid Number of Terephthalic Acid by Color-Indicator Titration |
ASTM D 6071 : 2014 : R2022 | Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy |
ASTM D 8493 : 2023 | Standard Guide for Sample Preparation of Cannabis and Hemp Inflorescence for Laboratory Analysis |
ASTM D 7303 : 2023 | Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry |
ASTM D 8213 : 2018 | Standard Test Method for Determination of Boron in Coal |
ASTM D 5542 : 2016 | Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography |
ASTM D 1767 : 1989 : R2017 | Standard Test Method for Ethylene Diamine Tetraacetate (EDTA) in Soaps or Synthetic Detergents |
ASTM E 878 : 2020 | Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry |
ASTM D 718 : 1986 : R2020 | Standard Test Methods for Analysis of Aluminum Silicate Pigment |
ASTM D 8485 : 2023 | Standard Test Method for Corrosion Test for Electric Vehicle Coolants in Glassware |
ASTM D 6919 : 2017 | Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography |
ASTM D 1385 : 2007 : R2018 : EDT 1 | Standard Test Method for Hydrazine in Water |
ASTM E 1200 : 2024 | Standard Practice for Preserving Zooplankton Samples |
ASTM D 5795 : 2016 : R2024 | Standard Test Method for Determination of Liquid Water Absorption of Coated Wood and Wood Based Products Via “Cobb Ring” Apparatus |
ASTM D 6238 : 1998 : R2024 | Standard Test Method for Total Oxygen Demand in Water |
ASTM D 5363 : 2016 : R2024 | Standard Specification for Anaerobic Single-Component Adhesives (AN) |
ASTM D 7670 : 2010 : R2021 | Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters |
ASTM D 4755 : 1995 : R2020 | Standard Test Method for Free Halogens in Halogenated Organic Solvents and Their Admixtures |
ASTM D 6529 : 2022 | Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50 μS/cm to 1000 μS/cm |
ASTM D 5315 : 2004 : R2024 | Standard Test Method for Determination of N-Methyl-Carbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post-Column Derivatization |
ASTM F 746 : 2004 : R2021 | Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials |
ASTM D 1890 : 2015 : R2017 | Standard Test Method for Beta Particle Radioactivity of Water |
ASTM D 7777 : 2024 | Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter |
ASTM D 3723 : 2022 | Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing |
ASTM D 2193 : 2022 | Standard Test Method for Hydroquinone in Vinyl Acetate |
ASTM D 6767 : 2021 | Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test |
ASTM D 7391 : 2020 | Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy |
ASTM C 1477 : 2019 | Standard Test Method for Isotopic Abundance Analysis of Uranium Hexafluoride and Uranyl Nitrate Solutions by Multi-Collector, Inductively Coupled Plasma-Mass Spectrometry |
ASTM C 1387 : 2023 | Standard Guide for the Determination of Technetium-99 in Soil |
ASTM D 4659 : 2019 | Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates |
ASTM D 6447 : 2009 : R2021 | Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis |
ASTM D 1363 : 2006 : R2019 | Standard Test Method for Permanganate Time of Acetone and Methanol |
ASTM D 8526 : 2023 | Standard Test Method for Analytical Procedure Using Transmission Electron Microscopy for the Determination of the Concentration of Carbon Nanotubes and Carbon Nanotube-containing Particles in Ambient Atmospheres |
ASTM D 6581 : 2018 | Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography |
ASTM D 8018 : 2015 : R2020 | Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Soil by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS) |
ASTM D 2129 : 2017 | Standard Test Method for Color of Clear Electrical <brk/>Insulating Liquids (Platinum-Cobalt Scale) |
ASTM E 2197 : 2024 | Standard Quantitative Disk Carrier Test Method for Determining Bactericidal, Virucidal, Fungicidal, Mycobactericidal, and Sporicidal Activities of Chemicals |
ASTM D 3989 : 2001 : R2019 : EDT 1 | Standard Test Method for Total Rare Earth Metals in Paint Driers by EDTA Method |
ASTM F 1089 : 2018 | Standard Test Method for Corrosion of Surgical Instruments |
ASTM D 6784 : 2024 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) |
ASTM D 7975 : 2022 | Standard Test Method for Determination of Vapor Pressure of Crude Oil: <brk/>VPCR<inf >x</inf>-F(Tm°C) (Manual Expansion Field Method) |
ASTM D 1631 : 2024 | Standard Test Method for Water in Phenol and Related Materials by the Karl Fischer Reagent Method |
ASTM D 4438 : 2024 | Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting |
ASTM D 5241 : 1992 : R2024 | Standard Practice for Micro-Extraction of Water for Analysis of Volatile and Semi-Volatile Organic Compounds in Water |
ASTM D 5708 : 2015 : R2020 : EDT 1 | Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry |
ASTM D 126 : 1987 : R2023 | Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green |
ASTM D 4725 : 2015 : R2023 | Standard Terminology for Engine Coolants and Related Fluids |
ASTM D 7858 : 2013 : R2018 | Standard Test Method for Determination of Bisphenol A in Soil, Sludge, and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry |
ASTM D 5116 : 2017 | Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products |
ASTM E 815 : 2024 | Standard Test Method for Determination of Calcium Fluoride in Fluorspar by EDTA Complexometric Titrimetry |
ASTM D 6888 : 2016 : R2023 | Standard Test Method for Available Cyanides with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection |
ASTM C 872 : 2010 : R2021 | Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces |
ASTM E 1673 : 2021 | Standard Test Method for Percent Suspensibility |
ASTM D 8186 : 2018 | Standard Test Method for Measurement of Impurities in Graphite by Electrothermal Vaporization Inductively Coupled Plasma Optical Emission Spectrometry (ETV-ICP OES) |
ASTM B 117 : 2019 | Standard Practice for Operating Salt Spray (Fog) Apparatus |
ASTM D 6731 : 2022 | Standard Test Method for<!--ask about discussion in biodegradation def (keep?)--> Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer |
ASTM F 484 : 2008 : R2019 | Standard Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds |
ASTM D 8262 : 2022 | Standard Test Method for Determining the pH of Granular Material for Use in Embankments, Subgrades, and Retaining Wall Backfil |
ASTM G 87 : 2002 : R2023 | Standard Practice for Conducting Moist SO<inf>2</inf> Tests |
ASTM D 4789 : 2020 : EDT 1 | Standard Test Method for Solution Color of Bisphenol A (4,4<emph type="ital">′</emph >-Isopropylidenediphenol) |
ASTM E 351 : 2018 | Standard Test Methods for Chemical Analysis of Cast Iron—All Types |
ASTM D 2074 : 2007(R2019) | Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method |
ASTM D 2119 : 2024 | Standard Test Method for Aldehydes in Styrene Monomer |
ASTM C 889 : 2018 | Standard Test Methods for Chemical and Mass Spectrometric Analysis of Nuclear-Grade Gadolinium Oxide (Gd<inf>2</inf>O<inf>3</inf>) Powder |
ASTM D 8234 : 2019 | Standard Test Method for Anions in High Ionic Water by Ion Chromatography using Tandem Suppressed Conductivity and UV Detection |
ASTM D 5954 : 2022 : REV A | Standard Test Method for Mercury Sampling and Measurement in Gaseous Fuels by Atomic Absorption Spectroscopy |
ASTM E 508 : 2021 | Standard Test Method for Determination of Calcium and Magnesium in Iron Ores by Flame Atomic Absorption Spectrometry |
ASTM D 4856 : 2023 | Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis) |
ASTM E 3297 : 2021 | Standard Test Method for Lipid Quantitation in Liposomal Formulations Using High Performance Liquid Chromatography (HPLC) with a Charged Aerosol Detector (CAD) |
ASTM D 1292 : 2015 : R2021 : EDT 1 | Standard Test Method for Odor in Water |
ASTM D 4691 : 2017 | Standard Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry |
ASTM D 4193 : 2008 : R2020 : EDT 1 | Standard Test Method for Thiocyanate in Water |
ASTM D 4008 : 2019 : R2024 | Standard Guide for Measuring Anti-Soil Deposition Properties of Laundry Detergents |
ASTM D 7245 : 2009 : R2021 | Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating |
ASTM C 1324 : 2020 : REV A | Standard Test Method for Examination and Analysis of Hardened Masonry Mortar |
ASTM E 2275 : 2024 | Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance |
ASTM D 4827 : 2003 : R2022 | Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography |
ASTM C 761 : 2018 | Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride |
ASTM D 8002 : 2024 | Standard Test Method for Modified Fouling Index (MFI-0.45) of Water |
ASTM D 233 : 2013 : R2022 | Standard Test Methods of Sampling and Testing Turpentine |
ASTM D 5627 : 2017 | Standard Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins |
ASTM D 8214 : 2018 | Standard Test Method for Forms of Sulfur in Coal by Inductively Coupled Plasma Atomic Emission Spectrometry |
ASTM C 1084 : 2019 | Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete |
ASTM C 1456 : 2013 : R2018 | Standard Test Method for Determination of Uranium or Gadolinium (or both) in Gadolinium Oxide-Uranium Oxide Pellets or by X-Ray Fluorescence (XRF) |
ASTM C 1301 : 2022 | Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA) |
ASTM E 2274 : 2024 | Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants |
ASTM D 5128 : 2014 : R2022 | Standard Test Method for On-Line pH Measurement of Water of Low Conductivity |
ASTM D 2276 : 2022 | Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling |
ASTM E 1805 : 2021 | Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry |
ASTM E 1910/E1910M : 2021 | Standard Test Method for Agricultural pH Control Agents, Measurement of pH Change and Buffering Capacity |
ASTM D 2972 : 2015 : R2023 | Standard Test Methods for Arsenic in Water |
ASTM D 5808 : 2023 | Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry |
ASTM D 4839 : 2003 : R2024 | Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection |
ASTM E 1898 : 2021 | Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry |
ASTM F 1940 : 2007 : REV A : R2024 | Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners |
ASTM D 6266 : 2000 : REV A : R2023 | Standard Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) |
ASTM D 3731 : 2024 | Standard Practices for Measurement of Chlorophyll Content of Algae in Surface Waters |
ASTM D 6553 : 2023 | Standard Test Method for Coolant Compatibility of Way Lubricants |
ASTM D 5847 : 2022 | Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis |
ASTM F 331 : 2013 : R2020 | Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator) |
ASTM D 1252 : 2006 : R2020 | Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water |
ASTM D 5577 : 2019 | Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics |
ASTM D 5197 : 2021 | Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology) |
ASTM D 3969 : 2001 : R2019 : EDT 1 | Standard Test Method for Zirconium in Paint Driers by EDTA Method |
ASTM C 1260 : 2023 | Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method) |
ASTM D 8431 : 2022 | Standard Test Method for Detection of Water-soluble Petroleum Oils by A-TEEM Optical Spectroscopy and Multivariate Analysis |
ASTM E 223 : 2023 : EDT 1 | Standard Test Methods for Analysis of Sulfuric Acid |
ASTM D 8568 : 2024 | Standard Test Method for Determination of Lead by Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques |
ASTM D 6889 : 2003 : R2024 | Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME) |
ASTM C 1474 : 2019 | Standard Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry |
ASTM D 7728 : 2018 | Standard Guide for Selection of ASTM Analytical Methods for Implementation of International Cyanide Management Code Guidance |
ASTM D 3372 : 2017 | Standard Test Method for Molybdenum in Water |
ASTM D 5452 : 2023 | Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration |
ASTM C 1622/C1622M : 2024 | Standard Specification for Cold-Weather Admixture Systems |
ASTM D 8371 : 2024 | Standard Test Method for Trace Metal Content Analysis in Carbon Black |
ASTM D 7065 : 2017 : R2024 | Standard Test Method for Determination of Nonylphenol, Bisphenol A, <emph type="bdit" >p-tert</emph>-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry |
ASTM D 7359 : 2023 | Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC) |
ASTM D 7437 : 2023 | Standard Test Method for Temperature and Hard Water Stability of Engine Coolants |
ASTM D 1492 : 2021 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration |
ASTM D 5788 : 1995 : R2024 | Standard Guide for Spiking Organics into Aqueous Samples |
ASTM D 857 : 2017 | Standard Test Method for Aluminum in Water |
ASTM D 8028 : 2017 : R2024 | Standard Test Method for Measurement of Dissolved Gases Methane, Ethane, Ethylene, and Propane by Static Headspace Sampling and Flame Ionization Detection (GC/FID) |
ASTM D 7884 : 2024 | Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography |
ASTM C 1508 : 2018 | Standard Test Method for Determination of Bromine and Chlorine in UF<inf>6</inf> and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy |
ASTM D 974 : 2022 | Standard Test Method for Acid and Base Number by Color-Indicator Titration |
ASTM D 1652 : 2011 : R2019 | Standard Test Method for Epoxy Content of Epoxy Resins |
ASTM D 8411 : 2021 | Standard Test Method for Rubber Compounding Materials—Determination of 2-Mercaptobenzothiazole (MBT) in Rubber |
ASTM E 1297 : 2018 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium |
ASTM C 697 : 2016 | Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets |
ASTM D 4735 : 2019 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography |
ASTM D 3875 : 2015 : R2023 | Standard Test Method for Alkalinity in Brackish Water, Seawater, and Brines |
ASTM D 7736 : 2019 : REV A : R2023 | Standard Test Method for Determination of Acids and Glycol Esters in Glycols |
ASTM D 7511 : 2012 : R2024 | Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection |
ASTM D 7202 : 2022 | Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection |
ASTM D 6333 : 2023 | Standard Practice for Collection of Dislodgeable Pesticide Residues from Floors |
ASTM G 162 : 2023 | Standard Practice for Conducting and Evaluating Laboratory Corrosion Tests in Soils |
ASTM D 8332 : 2020 | Standard Practice for Collection of Water Samples with High, Medium, or Low Suspended Solids for Identification and Quantification of Microplastic Particles and Fibers |
ASTM D 3373 : 2017 | Standard Test Method for Vanadium in Water |
ASTM E 2594 : 2020 | Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based) |
ASTM D 5256 : 2014 : R2022 | Standard Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits |
ASTM D 5543 : 2021 | Standard Test Method for Low-Level Dissolved Oxygen in Water |
ASTM E 887 : 2021 | Standard Test Method for Silica in Refuse-Derived Fuel (RDF) and RDF Ash |
ASTM D 3454 : 2021 | Standard Test Method for Radium-226 in Water |
ASTM D 8304 : 2024 | Standard Test Method for Determination of Compounded Forms of Iron in In-service Fluids |
ASTM G 134 : 2017 : R2023 | Standard Test Method for Erosion of Solid Materials by Cavitating Liquid Jet |
ASTM D 7968 : 2023 | Standard Test Method for Determination of Polyfluorinated Compounds in Soil by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS) |
ASTM D 8031 : 2016 : R2024 | Standard Test Method for Acid Number of Terephthalic Acid (TA) by Automatic Potentiometric Titration |
ASTM D 3610 : 2022 | Standard Test Method for Total Cobalt in Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method |
ASTM C 494/C494M : 2024 | Standard Specification for Chemical Admixtures for Concrete |
ASTM D 5931 : 2020 | Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter |
ASTM D 4301 : 2005(R2019) | Standard Test Method for Total Chlorine in Epoxy Resins and Compounds |
ASTM D 4765 : 2013 : R2018 | Standard Test Method for Measurement of Fluorides in Workplace Atmospheres by Ion-Selective Electrodes |
ASTM C 1009 : 2021 | Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry |
ASTM D 4663 : 2020 | Flameproof restrained plugs |
ASTM D 3230 : 2019 | Standard Test Method for Salts in Crude Oil (Electrometric Method) |
ASTM F 838 : 2020 | Standard Test Method for Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration |
ASTM F 502 : 2008 : R2019 | Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces |
ASTM D 5997 : 2015 : R2024 | Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection |
ASTM C 225 : 1985 : R2022 | Standard Test Methods for Resistance of Glass Containers to Chemical Attack |
ASTM D 4764 : 2001 : R2023 | Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint |
ASTM E 246 : 2021 | Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry |
ASTM D 8489 : 2023 : EDT 1 | Standard Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size and Shape Analyzer |
ASTM D 2896 : 2021 | Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration |
ASTM G 150 : 2018 : R2024 | Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels and Related Alloys |
ASTM C 1475 : 2017 | Standard Guide for Determination of Neptunium-237 in Soil |
ASTM E 2551 : 2020 | Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers |
ASTM D 3838 : 2023 | Standard Test Method for pH of Activated Carbon |
ASTM D 3862 : 2013 : R2019 | Standard Test Method for Retention Characteristics of 0.2-µm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality |
ASTM F 2129 : 2024 | Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices |
ASTM D 7321 : 2021 | Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration |
ASTM D 3717 : 1985 : REV A : R2022 | Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy |
ASTM F 1864 : 2021 | Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings |
ASTM E 2406 : 2024 | Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants for Use in High Efficiency Washing Operations |
ASTM D 6208 : 2007 : R2020 | Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement |
ASTM F 945 : 2022 | Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials |
ASTM D 7548 : 2022 | Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products |
ASTM E 534 : 2018 | Standard Test Methods for Chemical Analysis of Sodium Chloride |
ASTM D 4190 : 2015 : R2023 | Standard Test Method for Elements in Water by Direct-Current Plasma Atomic Emission Spectroscopy |
ASTM D 1129 : 2013 : R2020 : EDT 2 | Standard Terminology Relating to Water |
ASTM D 1129 : 2024 | Standard Terminology Relating to Water |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.