ASTM D 5324 : 2016 : REDLINE
Current
The latest, up-to-date edition.
Standard Guide for Testing Water-Borne Architectural Coatings
English
08-02-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 06.02, 2017 Defines the selection and use of procedures for testing water-borne coatings to be used on interior, exterior or both types of surface.
| Committee |
D 01
|
| DevelopmentNote |
Supersedes ASTM D 2833, ASTM D 2931, ASTM D 3129, ASTM D 3358 and ASTM D 4540 (12/2001)
|
| DocumentType |
Redline
|
| Pages |
12
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This guide covers the selection and use of procedures for testing water-borne coatings to be used on exterior, interior or both types of surfaces (Note 1). The properties that can be examined or, in some cases, the relevant test procedures are listed in Table 1 and Table 2.
Note 1:The term “architectural coating” as used here combines the definition in Terminology D16 with that in the FSCT Paint/Coatings Dictionary, 2 as follows: “Organic coatings intended for on-site application to interior or exterior surfaces of residential, commercial, institutional, or industrial buildings, in contrast to industrial coatings. They are protective and decorative finishes applied at ambient temperatures. Often called Trade Sales Coatings.”
Note 2:Architectural coatings that are designed to give better performance than most conventional coatings because they are tougher and more stain and abrasion resistant are covered by Guide D3730.
1.2The types of organic coatings covered by this guide are as follows:
(1)Type 1 Interior Latex Flat Wall Paints,
(2)Type 2 Exterior Latex House Paints,
(3)Type 3 Water-Borne Floor Paints, and
(4)Type 4 Interior Latex Semigloss and Gloss Paints.
1.2.1Each is intended for application by brushing, rolling, spraying or other means to the material appropriate for its type, which may include plaster, masonry, wallboard, wood, steel, previously painted surfaces, and other architectural substrates.
1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 6577 : 2015 : REDLINE | Standard Guide for Testing Industrial Protective Coatings |
| ASTM D 2486 : 2017 : REDLINE | Standard Test Methods for Scrub Resistance of Wall Paints |
| ASTM D 3719 : 2000 | Standard Test Method for Quantifying Dirt Collection on Coated Exterior Panels (Withdrawn 2009) |
| ASTM D 1729 : 2016 : REDLINE | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| ASTM D 2370 : 2016 : REDLINE | Standard Test Method for Tensile Properties of Organic Coatings |
| ASTM D 3792 : 2016 : REDLINE | Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph |
| ASTM D 5895 : 2013 : REDLINE | Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders |
| ASTM D 660 : 1993 | Standard Test Method for Evaluating Degree of Checking of Exterior Paints |
| ASTM E 105 : 2016 : REDLINE | Standard Practice for Probability Sampling of Materials |
| ASTM D 358 : 1998 | Standard Specification for Wood to Be Used as Panels in Weathering Tests of Coatings |
| ASTM D 16 : 2016 : REDLINE | TERMINOLOGY FOR PAINT, RELATED COATINGS, MATERIALS, AND APPLICATIONS |
| ASTM E 70 | TEST METHOD FOR PH OF AQUEOUS SOLUTIONS WITH THE GLASS ELECTRODE |
| ASTM D 2197 : 2016 : REDLINE | Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion |
| ASTM D 2244 : 2016 : REDLINE | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 661 : 1993 | Standard Test Method for Evaluating Degree of Cracking of Exterior Paints |
| ASTM D 662 : 1993 | Standard Test Method for Evaluating Degree of Erosion of Exterior Paints |
| ASTM D 2574 : 2016 : REDLINE | Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms |
| ASTM D 562 : 2010 | Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer |
| ASTM D 3258 : 2004 | Standard Test Method for Porosity of White or Near White Paint Films by Staining |
| ASTM D 7514 : 2014 : REDLINE | Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment |
| ASTM D 5326 : 1994 : REV A | Standard Test Method for Color Development in Tinted Latex Paints |
| ASTM D 3450 : 2015 : REDLINE | Standard Test Method for Washability Properties of Interior Architectural Coatings |
| ASTM D 3730 : 2017 : REDLINE | Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
| ASTM D 1475 : 2013 : REDLINE | Standard Test Method For Density of Liquid Coatings, Inks, and Related Products |
| ASTM D 522 : 1993 : REV A | Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
| ASTM D 3273 : 2016 : REDLINE | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM D 3359 : 2017 : REDLINE | Standard Test Methods for Rating Adhesion by Tape Test |
| ASTM D 5179 : 2016 : REDLINE | Standard Test Method for Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.