![header thumbnail](/images/publishers\astm_cover.gif)
ASTM D 6339 : 2011 : R2019
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)
Hardcopy , PDF
English
01-04-2019
This classification system covers syndiotactic polystyrene materials including homopolymer, copolymers, blends, and impact modified, suitable for molding and extrusion.
Committee |
D 20
|
DocumentType |
Standard
|
Pages |
6
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This classification system covers syndiotactic polystyrene materials including homopolymer, copolymers, blends, and impact modified, suitable for molding and extrusion. Recycled product will be addressed in a separate standard.
1.2This classification system and subsequent line callout (specification) are intended to provide a means of calling out plastic materials used in fabrication of end use items or parts. It is not intended for the selection of matierials. Material selection can be made by those having expertise in the plastics field only after careful consideration of the design and the performance required of the part, the environment to which it will be exposed, the fabrication process to be employed, the inherent properties of the material other than those covered by this classification system, and the economics.
1.3The properties included in this classification system are those required to identify the compositions covered. Other requirements necessary to identify particular characteristics important to specialized applications are to be called out using the suffixes given in Section 5.
Note 1:There is no known ISO equivalent to this standard.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 4000 : 2016 | Standard Classification System for Specifying Plastic Materials |
ASTM D 1600 : 1999 | Standard Terminology for Abbreviated Terms Relating to Plastics |
ASTM D 256 : 2010 : R2018 | Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics |
ASTM D 883 : 2023 | Standard Terminology Relating to Plastics |
ASTM D 1238 : 2000 | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 1238 : 2004 : REV C | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 4000 : 2013 | Standard Classification System for Specifying Plastic Materials |
ASTM D 1238 : 2023 | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 1238 : 2023 : REV A | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM E 29 : 2013 : R2019 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
ASTM D 3892 : 2015 : R2020 | Standard Practice for Packaging/Packing of Plastics |
ASTM D 1238 : 2013 | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 4000 : 2003 : REV A | Standard Classification System for Specifying Plastic Materials |
ASTM D 4000 : 2000 : REV A | Standard Classification System for Specifying Plastic Materials |
ASTM D 883 : 2024 | Standard Terminology Relating to Plastics |
ASTM D 4000 : 2012 | Standard Classification System for Specifying Plastic Materials |
ASTM D 4000 : 2009 | Standard Classification System for Specifying Plastic Materials |
ASTM D 3641 : 2002 | Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials |
ASTM D 1238 : 2010 | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
ASTM D 3892 : 1993 : R2003 | Standard Practice for Packaging/Packing of Plastics |
ASTM D 256 : 2023 : EDT 1 | Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics |
ASTM D 3892 : 2015 | Standard Practice for Packaging/Packing of Plastics |
ASTM D 1525 : 2017 : EDT 1 | Standard Test Method for Vicat Softening Temperature of Plastics |
ASTM D 4000 : 2011 | Standard Classification System for Specifying Plastic Materials |
ASTM D 883 : 2022 | Standard Terminology Relating to Plastics |
ASTM D 883 : 2020 : REV B | Standard Terminology Relating to Plastics |
ASTM D 3892 : 1993 : R1998 | Standard Practice for Packaging/Packing of Plastics |
ASTM D 1600 : 2007 | Standard Terminology for Abbreviated Terms Relating to Plastics |
ASTM D 4000 : 2004 : EDT 1 | Standard Classification System for Specifying Plastic Materials |
ASTM D 1600 : 2013 | Standard Terminology for Abbreviated Terms Relating to Plastics |
ASTM D 3641 : 2021 | Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials |
ASTM D 3641 : 2010 | Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials |
ASTM D 1600 : 2014 | Standard Terminology for Abbreviated Terms Relating to Plastics |
ASTM D 4000 : 2023 | Standard Classification System for Specifying Plastic Materials |
ASTM D 1600 : 2008 | Standard Terminology for Abbreviated Terms Relating to Plastics |
ASTM D 4000 : 2009 : REV B | Standard Classification System for Specifying Plastic Materials |
ASTM D 3641 : 2015 | Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials |
ASTM D 4000 : 2000 | Standard Classification System for Specifying Plastic Materials |
ASTM D 1525 : 2017 | Standard Test Method for Vicat Softening Temperature of Plastics |
ASTM D 1525 : 2000 | Standard Test Method for Vicat Softening Temperature of Plastics |
ASTM D 3641 : 2010 : REV A | Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials |
ASTM D 4000 : 2010 : REV A | Standard Classification System for Specifying Plastic Materials |
ASTM D 256 : 2023 | Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics |
ASTM D 3641 : 2014 | Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials |
ASTM D 1525 : 2006 | Standard Test Method for Vicat Softening Temperature of Plastics |
ASTM D 4000 : 2007 | Standard Classification System for Specifying Plastic Materials |
ASTM D 4000 : 2009 : REV A | Standard Classification System for Specifying Plastic Materials |
ASTM D 5630 : 2013 | Standard Test Method for Ash Content in Plastics (Withdrawn 2022) |
ASTM D 1525 : 1987 | Standard Test Method for Vicat Softening Temperature of Plastics |
ASTM D 1525 : 2009 | Standard Test Method for Vicat Softening Temperature of Plastics |
ASTM D 4000 : 2001 | Standard Classification System for Specifying Plastic Materials |
ASTM D 5630 : 1994 | Standard Test Method for Ash Content in Thermoplastics |
ASTM D 4000 : 2008 | Standard Classification System for Specifying Plastic Materials |
ASTM D 638 : 2014 | Standard Test Method for Tensile Properties of Plastics |
ASTM D 1238 : 2004 | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 1600 : 2018 | Standard Terminology for Abbreviated Terms Relating to Plastics (Withdrawn 2024) |
ASTM D 618 : 2013 | Standard Practice for Conditioning Plastics for Testing |
ASTM D 4000 : 2001 : REV A : EDT 1 | Standard Classification System for Specifying Plastic Materials |
ASTM D 4000 : 2004 | Standard Classification System for Specifying Plastic Materials |
ASTM D 5630 : 2001 | Standard Test Method for Ash Content in Thermoplastics |
ASTM D 3892 : 1993 : R2009 | Standard Practice for Packaging/Packing of Plastics |
ASTM D 1238 : 2001 : EDT 1 | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 4000 : 2010 | Standard Classification System for Specifying Plastic Materials |
ASTM D 5630 : 2022 | Standard Test Method for Ash Content in Plastics |
ASTM D 5630 : 2006 | Standard Test Method for Ash Content in Plastics |
ASTM D 3641 : 1997 | Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials |
ASTM D 1238 : 2020 | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 1238 : 2004 : REV A | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 3641 : 2012 | Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials |
ASTM D 4000 : 2003 | Standard Classification System for Specifying Plastic Materials |
ASTM D 1525 : 2007 | Standard Test Method for Vicat Softening Temperature of Plastics |
ASTM D 1238 : 1985 | Standard Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 4000 : 2020 | Standard Classification System for Specifying Plastic Materials |
ASTM D 618 : 2021 | Standard Practice for Conditioning Plastics for Testing |
ASTM D 638 : 2022 | Standard Test Method for Tensile Properties of Plastics |
ASTM E 29 : 2022 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.