ASTM D 658 : 1991
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Standard Test Method for Abrasion Resistance of Organic Coatings by Air Blast Abrasive (Withdrawn 1996)
10-11-1996
31-12-2010
CONTAINED IN VOL: 06.01 2000 Evaluates the resistance of organic coatings to abrasion made by an air blast of abrasive on coatings applied to a plane, rigid surface, such as glass panel or a metal.
Committee |
ASTM
|
DocumentType |
Test Method
|
PublisherName |
American Society for Testing and Materials
|
Status |
Withdrawn
|
1.1 This test method covers the determination of the resistance of organic coatings to abrasion produced by an air blast of abrasive on coatings applied to a plane, rigid surface, such as a metal or glass panel.
1.2 This standard does not purport to address the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.>
ASTM B 580 : 1979 : R2000 | Standard Specification for Anodic Oxide Coatings on Aluminum |
ASTM D 3322 : 1982 : R2001 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
ASTM B 580 : 1979 : R2019 | Standard Specification for Anodic Oxide Coatings on Aluminum |
ASTM C 647 : 2008 | Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation |
ASTM D 3732 : 1982 : R2005 | Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings |
ASTM B 580 : 1979 : R2014 | Standard Specification for Anodic Oxide Coatings on Aluminum |
ASTM C 647 : 2008 : R2013 | Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation |
ASTM D 3322 : 1982 : R2011 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
ASTM D 3322 : 1982 : R2005 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
ASTM D 3732 : 1982 : R2011 | Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings |
ASTM D 333 : 2001 : R2007 | Standard Guide for Clear and Pigmented Lacquers |
ASTM B 580 : 1979 : R2004 | Standard Specification for Anodic Oxide Coatings on Aluminum |
ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
ASTM B 580 : 1979 : R2009 | Standard Specification for Anodic Oxide Coatings on Aluminum |
ASTM D 3732 : 1982 : R2017 | Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings |
ASTM D 3322 : 1982 : R1996 : EDT 1 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
ASTM D 3451 : 2006 | Standard Guide for Testing Coating Powders and Powder Coatings |
ASTM D 333 : 2001 : R2013 | Standard Guide for Clear and Pigmented Lacquers |
ASTM D 4712 : 1987 : REV A : R1996 | Standard Guide for Testing Industrial Water-Reducible Coatings |
AASHTO M 246 : 2015 | SPECIFICATION FOR STEEL SHEET, METALLIC-COATED AND POLYMER-PRECOATED, FOR CORRUGATED STEEL PIPE |
ASTM D 3451 : 2006 : R2012 | Standard Guide for Testing Coating Powders and Powder Coatings |
ASTM D 4712 : 1987 : REV A : R2001 | Standard Guide for Testing Industrial Water-Reducible Coatings |
ASTM D 3732 : 1982 : R2001 | Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings |
ASTM D 333 : 2001 | Standard Guide for Clear and Pigmented Lacquers |
GOST 849:2018 | Primary nickel. SpecificationsE |
MIL P 9503 : B | PAINT, RUBBER, RIGID AND AIR SUPPORTED RADOME |
ASTM D 3322 : 1982 : R2017 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
ASTM D 4712 : 1987 : REV A : R2005 | Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014) |
ASTM D 3451 : 2006 : R2017 | Standard Guide for Testing Coating Powders and Powder Coatings |
ASTM D 3732 : 1982 : R1996 : EDT 1 | Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings |
ASTM D 1400 : 2000 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base (Withdrawn 2006) |
ASTM D 823 : 1995 | Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels |
ASTM D 1186 : 2001 | Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base (Withdrawn 2006) |
ASTM E 11 : 2017 : REDLINE | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.