ASTM D 660 : 1993
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Evaluating Degree of Checking of Exterior Paints
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Superseded by
Language(s)
English
Published date
01-01-2000
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 06.01, 2017 Evaluates degrees and types of checking of exterior paint films.
| Committee |
D 01
|
| DocumentType |
Test Method
|
| Pages |
0
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 The illustrated reference standards included in this test method are representative of degrees and types of checking of exterior paint films. These standards are primarily intended for comparative evaluation.
| IEEE C57.12.29-2014 | IEEE Standard for Pad-Mounted Equipment--Enclosure Integrity for Coastal Environments |
| IEEE C57.12.30-2010 | IEEE Standard for Pole-Mounted Equipment--Enclosure Integrity for Coastal Environments |
| MIL-PRF-24667 Revision C:2008 | COATING SYSTEM, NON-SKID, FOR ROLL, SPRAY, OR SELF-ADHERING APPLICATION |
| MIL-PRF-24763 Revision B:2009 | ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE |
| MIL-PRF-32577 Base Document:2017 | Coating System, Nonskid, Metallic Thermal Spray Application |
| SAE J2527_201709 | Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Xenon-Arc Apparatus |
| ASTM D 3451 : 2006 : R2017 | Standard Guide for Testing Coating Powders and Powder Coatings |
| ASTM F 1130 : 1999 : R2005 | Standard Practice for Inspecting the Coating System of a Ship |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 6944 : 2015 : REDLINE | Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling |
| ASTM D 3322 : 1982 : R2001 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
| ASTM D 6137 : 1997 | Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems |
| ASTM D 5065 : 2017 : REDLINE | Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces |
| DIN EN 1396:2015-06 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| NACE RP 02 81 : 2004 | METHOD FOR CONDUCTING COATING (PAINT) PANEL EVALUATION TESTING IN ATMOSPHERIC EXPOSURES |
| ASTM D 2830 : 1996 | Standard Test Method for Exterior Durability of Factory-Primed Field Finished Wood Products (Withdrawn 2004) |
| ASTM D 5499 : 1994 : R1999 | Standard Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems |
| 13/30286946 DC : 0 | BS EN 1396 - ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
| ASTM D 3322 : 1982 : R1996 : EDT 1 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
| ASTM D 4082 : 2010 | Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Nuclear Power Plants |
| ASTM D 3927 : 1987 | Guide for State and Institutional Purchasing of Paint (Withdrawn 1991) |
| ASTM F 1130 : 1999 : R2014 | Standard Practice for Inspecting the Coating System of a Ship |
| CSA A440-A440.1 : 2000 | WINDOWS - USER SELECTION GUIDE TO CSA STANDARD CSA-A440-00, WINDOWS |
| SAE J2633_201503 | Wheel and Wheel Trim Weathering Testing for Paint Coatings |
| ASTM D 4141/D4141M : 2014 : REDLINE | Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings |
| ASTM D 3322 : 1982 : R2011 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
| ASTM D 3322 : 1982 : R2005 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
| ASTM D 6137 : 1997 : R2012 | Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems |
| ASTM D 333 : 2001 : R2007 | Standard Guide for Clear and Pigmented Lacquers |
| ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
| I.S. EN 1396:2015 | ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
| MIL-PRF-24635 Revision E:2009 | COATING SYSTEMS, WEATHER-RESISTANT, EXTERIOR USE |
| ASTM G 210 : 2013 | Standard Practice for Operating the Severe Wastewater Analysis Testing Apparatus |
| ASTM D 5499 : 1994 : R2007 | Standard Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems |
| ASTM D 5499 : 1994 : R2013 | Standard Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems |
| SSPC-PS 26.00 : 2016 | Aluminum-Pigmented Epoxy Coating System Materials Standard, Performance-Based; Type I for Use Over Blast Cleaned Steel; Type II for Use Over Hand-Cleaned Steel |
| ASTM D 661 : 1993 : R2011 | Standard Test Method for Evaluating Degree of Cracking of Exterior Paints |
| ASTM D 661 : 1993 | Standard Test Method for Evaluating Degree of Cracking of Exterior Paints |
| NACE TM 01 84 : 83(R1994) | ACCELERATED TEST PROCEDURES FOR SCREENING ATMOSPHERIC SURFACE COATING SYSTEMS FOR OFFSHORE PLATFORMS AND EQUIPMENT |
| ASTM D 6137 : 1997 : R2004 | Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems |
| ASTM D 1150 : 1955 : R1987 : EDT 1 | Single and Multi-Panel Forms for Recording Results of Exposure Tests of Paints |
| ASTM D 333 : 2001 : R2013 | Standard Guide for Clear and Pigmented Lacquers |
| ASTM D 4712 : 1987 : REV A : R1996 | Standard Guide for Testing Industrial Water-Reducible Coatings |
| ASTM D 4082 : 2010 : R2017 | Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Nuclear Power Plants |
| BS EN 1396:2007 | Aluminium and aluminium alloys. Coil coated sheet and strip for general applications. Specifications |
| ASTM D 5722 : 2014 : REDLINE | Standard Practice for Performing Accelerated Outdoor Weathering of Factory-Coated Embossed Hardboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure |
| ASTM D 3451 : 2006 | Standard Guide for Testing Coating Powders and Powder Coatings |
| SSPC-PA GUIDE 13 : 2006 | GUIDE SPECIFICATION FOR APPLICATION OF COATING SYSTEMS WITH ZINC-RICH PRIMERS TO STEEL BRIDGES |
| ASTM D 4587 : 2011 : REDLINE | Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
| MIL P 24647 : B | PAINT SYSTEM, ANTICORROSIVE & ANTIFOULING, SHIP HULL |
| MIL E 24763 : A | ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE |
| CSA Z107.9 : 2000 | STANDARD FOR CERTIFICATION OF NOISE BARRIERS |
| ASTM D 3451 : 2006 : R2012 | Standard Guide for Testing Coating Powders and Powder Coatings |
| ASTM D 6763 : 2016 : REDLINE | Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents |
| ASTM D 4712 : 1987 : REV A : R2001 | Standard Guide for Testing Industrial Water-Reducible Coatings |
| ASTM D 661 : 1993 : R2000 | Standard Test Method for Evaluating Degree of Cracking of Exterior Paints |
| ASTM D 661 : 1993 : R2005 | Standard Test Method for Evaluating Degree of Cracking of Exterior Paints |
| ACI 350M : 2006 | METRIC CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
| ASTM D 6137 : 1997 : R2018 | Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems |
| ASTM D 333 : 2001 | Standard Guide for Clear and Pigmented Lacquers |
| ASTM D 5324 : 2016 : REDLINE | Standard Guide for Testing Water-Borne Architectural Coatings |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| UNE-EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| CGSB-11.5 : M87 | HARDBOARD, PRECOATED, FACTORY FINISHED, FOR EXTERIOR CLADDING |
| N287.2-17 | Material requirements for concrete containment structures for nuclear power plants |
| ASTM D 6695 : 2016 : REDLINE | Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
| MIL-PRF-24647 Revision E:2013 | PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL |
| CSA Z107.9 : 2000 : R2004 | STANDARD FOR CERTIFICATION OF NOISE BARRIERS |
| PREN 1396 : DRAFT 2013 | ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
| ACI 350 : 2006 | CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
| IEEE C57.12.31-2010 | IEEE Standard for Pole-Mounted Equipment--Enclosure Integrity |
| IEEE C57.12.28-2014 | IEEE Standard for Pad-Mounted Equipment--Enclosure Integrity |
| ASTM D 2932 : 1980 : R1988 : EDT 1 | Guide for Testing Exterior Solvent-Based House and Trim Coatings (Withdrawn 1993) |
| ASTM D 6577 : 2015 : REDLINE | Standard Guide for Testing Industrial Protective Coatings |
| ASTM F 1130 : 1999 : R2009 | Standard Practice for Inspecting the Coating System of a Ship |
| ASTM D 3322 : 1982 : R2017 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
| ASTM D 4712 : 1987 : REV A : R2005 | Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014) |
| ASTM F 1130 : 1999 | Standard Practice for Inspecting the Coating System of a Ship |
| ASTM D 1641 : 2004 | Standard Practice for Conducting Outdoor Exposure Tests of Varnishes (Withdrawn 2013) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.