ASTM D 698 : 2013-05
NA
NA
Status of Standard is Unknown
TEST METHODS FOR LABORATORY COMPACTION CHARACTERISTICS OF SOIL USING STANDARD EFFORT (12400 FT-LBF/FT[3] (600 KN-M/M[3]))
Published date
01-05-2013
Sorry this product is not available in your region.
CONTAINED IN VOL. 04.08, 2016 Defines laboratory compaction methods used to determine the relationship between molding water content and dry unit weight of soils (compaction curve) compacted in a 4 or 6-in. (101.6 or 152.4-mm) diameter mold with a 5.50-lbf (24.5-N) rammer dropped from a height of 12.0 in. (305 mm) producing a compactive effort of 12400 ft-lbf/ft[3] (600 kN-m/m[3]).
| Committee |
D 18
|
| DocumentType |
Redline
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
NA
|
| ASTM D 5101 : 2012 | TEST METHOD FOR MEASURING THE FILTRATION COMPATIBILITY OF SOIL-GEOTEXTILE SYSTEMS |
| ASTM D 2922 : 2005 | Standard Test Methods for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth) (Withdrawn 2007) |
| ASTM D 7698 : 2011 : REV A : REDLINE | Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method |
| ASTM C 1479 : 2016 : REDLINE | Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations |
| ASTM D 7762 : 2018 : REDLINE | Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash |
| ASTM D 6758 : 2018 | Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method |
| CSA S500 : 2014 | THERMOSYPHON FOUNDATIONS FOR BUILDINGS IN PERMAFROST REGIONS |
| ASTM D 4253 : 2016 : REDLINE | Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table |
| ASTM D 1556/D1556M : 2015-03 | TEST METHOD FOR DENSITY AND UNIT WEIGHT OF SOIL IN PLACE BY SAND-CONE METHOD |
| ASTM D 5567 : 1994 : R2001 | Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
| ASTM D 7380 : 2015 : REDLINE | Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer |
| ASTM D 2937 : 2017-03 | TEST METHOD FOR DENSITY OF SOIL IN PLACE BY THE DRIVE-CYLINDER METHOD |
| ASTM D 653 : 2014 : REDLINE | Standard Terminology Relating to Soil, Rock, and Contained Fluids |
| ACI 301 : 2016 | SPECIFICATIONS FOR STRUCTURAL CONCRETE |
| ASCE 26 97 : 2000 | STANDARD PRACTICE FOR DIRECT DESIGN OF BURIED PRECAST CONCRETE BOX SECTIONS |
| ASCE 15 98 : 2000 | STANDARD PRACTICE FOR DIRECT DESIGN OF BURIED PRECAST CONCRETE PIPE USING STANDARD INSTALLATIONS (SIDD) |
| ASCE 24 05 : 2006 | FLOOD RESISTANT DESIGN AND CONSTRUCTION |
| ASTM D 6539 : 2013 : REDLINE | Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air |
| AWWA M9 : 2008 | CONCRETE PRESSURE PIPE |
| AWWA M55 : 1 | PE PIPE - DESIGN AND INSTALLATION |
| CEN/TR 15463:2007 | Characterization of sludges - Physical consistency - Thixotropic behaviour and piling behaviour |
| AWWA M45 : 3 | FIBERGLASS PIPE DESIGN |
| ASTM E 2243 : 2013 | Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Re-contouring and Highwall Reclamation |
| UFC 3-220-08FA : 2004 | UNIFIED FACILITIES CRITERIA - ENGINEERING USE OF GEOTEXTILES |
| MIL-A-28624 Revision B:1984 | Auger, Earth, Portable; Hand-Held Two-Man, Gasoline-Engine-Driven (S/S by OO-A-2775) |
| UFC 3-250-01 : 2016 | UNIFIED FACILITIES CRITERIA (UFC) - PAVEMENT DESIGN FOR ROADS AND PARKING AREAS |
| UFC 4-150-07 : Change 1 | UNIFIED FACILITIES CRITERIA - MAINTENANCE AND OPERATION: MAINTENANCE OF WATERFRONT FACILITIES |
| ASTM D 4874 : 1995 : R2014 | Standard Test Method for Leaching Solid Material in a Column Apparatus (Withdrawn 2021) |
| ASTM D 7830/D7830M : 2014 : REDLINE | Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge |
| ASTM D 5101 : 2012 | Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems |
| ASTM D 5567 : 1994 : R2011 | Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
| ASTM D 6938 : 2017-03 | TEST METHOD FOR IN-PLACE DENSITY AND WATER CONTENT OF SOIL AND SOIL-AGGREGATE BY NUCLEAR METHODS (SHALLOW DEPTH) |
| ASCE 24 98 : 2000 | FLOOD RESISTANCE DESIGN AND CONSTRUCTION |
| ASCE 36 01 : 2001 | STANDARD CONSTRUCTION GUIDELINES FOR MICROTUNNELING |
| IEEE 442-1981 | IEEE Guide for Soil Thermal Resistivity Measurements |
| ASCE/CI 36 15 : 2015 | STANDARD DESIGN AND CONSTRUCTION GUIDELINES FOR MICROTUNNELING |
| AWWA D107:2016 | COMPOSITE ELEVATED TANKS FOR WATER STORAGE |
| ISO 10844:2014 | Acoustics — Specification of test tracks for measuring noise emitted by road vehicles and their tyres |
| ANSI/AWWA D110:2013(R2018) | WIRE- AND STRAND-WOUND, CIRCULAR, PRESTRESSED CONCRETE WATER TANKS |
| ASTM C 361 : 2019 : REDLINE | SPECIFICATION FOR REINFORCED CONCRETE LOW-HEAD PRESSURE PIPE |
| ASTM B 788/B788M : 2009 : R2014 | Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe |
| ASTM E 2392 : 2005 | Standard Guide for Design of Earthen Wall Building Systems |
| ASTM D 1452/D1452M : 2016 : REDLINE | Standard Practice for Soil Exploration and Sampling by Auger Borings |
| ASTM D 6913 : 2004 : R2009 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 558 : 2011 : REDLINE | Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures |
| ASTM D 560/D560M : 2016 : REDLINE | Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures |
| ASTM D 3080 : 2004 | Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions |
| ASTM D 6913 : 2004 : R2009 : EDT 1 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 559/D559M : 2015 | Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures |
| ASTM D 6913/D6913M : 2017 : REDLINE | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 3080/D3080M : 2011 : REDLINE | Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions (Withdrawn 2020) |
| ASTM D 7263 : 2009 : R2018 : EDT 1 | Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens |
| ASTM D 4829 : 2011 : REDLINE | Standard Test Method for Expansion Index of Soils |
| ASTM D 4914/D4914M : 2016 : REDLINE | Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit |
| ASTM E 2277 : 2014 | Standard Guide for Design and Construction of Coal Ash Structural Fills |
| ASTM E 2278 : 2013 | Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage |
| ASTM D 6780/D6780M : 2012 : REDLINE | Standard Test Method for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR) |
| ASTM A 807/A807M : 2017 : REDLINE | Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications |
| ASTM D 7243 : 2011 : REDLINE | Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges |
| ASTM D 6780 : 2005 | Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR) |
| ASTM D 6459 : 2015 : REDLINE | Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion |
| ASTM D 5856 : 2015 : REDLINE | Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter |
| ASTM D 2167 : 2015 : REDLINE | Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method |
| ASTM D 3839 : 2014 : REDLINE | Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe |
| ASTM D 5030 : 2004 | Standard Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit |
| ASTM D 6913 : 2004 : EDT 1 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 6460 : 2012 : REDLINE | Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion |
| ASTM D 7263 : 2009 : R2018 | Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens |
| ASTM D 4718 : 1987 : R2007 | Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles |
| ASTM B 788/B788M : 2009 | Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe |
| ACI 330.1M : 2014 | SPECIFICATION FOR UNREINFORCED CONCRETE PARKING LOTS AND SITE PAVING (METRIC) |
| ASTM D 4718/D4718M : 2015 : REDLINE | Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles |
| UFC 3-250-11 : 2004 | UNIFIED FACILITIES CRITERIA - SOIL STABILIZATION FOR PAVEMENTS |
| ASTM F 2396 : 2011 : REDLINE | Standard Guide for Construction of High Performance Sand-Based Rootzones for Athletic Fields |
| ASTM D 7263 : 2009 | Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens |
| ASTM D 4647/D4647M : 2013 : REDLINE | Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test |
| ASTM D 1633 : 2017 | Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders (Withdrawn 2026) |
| ASTM D 4718 : 1987 : R2001 | Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles |
| PD CEN/TR 15463:2007 | Characterization of sludges. Physical consistency. Thixotropic behaviour and piling behaviour |
| ASTM F 2747 : 2010 | Standard Guide for Construction of Sand-based Rootzones for Golf Putting Greens and Tees (Withdrawn 2019) |
| ASTM D 4718 : 1987 : R1994 : EDT 2 | Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles |
| ASTM D 7277 : 2016 : REDLINE | Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow |
| ASTM D 5080 : 2017 : REDLINE | Standard Test Method for Rapid Determination of Percent Compaction |
| ASTM D 6913 : 2004 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 6913 : 2004 : EDT 2 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 7100 : 2011 : REDLINE | Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions |
| ASTM D 6243/D6243M : 2016 : REDLINE | Standard Test Method for Determining the Internal and Interface Shear Strength of Geosynthetic Clay Liner by the Direct Shear Method |
| ASTM D 1557 : 2012 : EDT 1 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 5874 : 2016 : REDLINE | Standard Test Methods for Determination of the Impact Value (IV) of a Soil |
| ASTM D 5567 : 1994 : R2006 | Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
| ASTM F 1668 : 2016 : REDLINE | Standard Guide for Construction Procedures for Buried Plastic Pipe |
| ASTM D 5567 : 1994 : R1999 | Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
| AWWA M23 : 2 | PVC PIPE - DESIGN AND INSTALLATION |
| ACI 233R : 2017 | GUIDE TO THE USE OF SLAG CEMENT IN CONCRETE AND MORTAR |
| ACI 330R : 2008 | GUIDE FOR THE DESIGN AND CONSTRUCTION OF CONCRETE PARKING LOTS |
| ACI 346 : 2009 | SPECIFICATION FOR CAST-IN-PLACE CONCRETE PIPE |
| ASTM D 4021 : 1992 | Standard Specification for Glass-Fiber-Reinforced Polyester Underground Petroleum Storage Tanks (Withdrawn 1999) |
| ASTM A 798/A798M : 2017 : REDLINE | Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications |
| ASTM D 7207 : 2005 | Standard Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Sand from Hydraulically-Induced Shear Stresses under Bench-Scale Conditions (Withdrawn 2014) |
| ACI 522R : 2010(R2011) | REPORT ON PERVIOUS CONCRETE |
| ACI 360R : 2010 | GUIDE TO DESIGN OF SLABS-ON-GROUND |
| ACI 238.1R : 2008 | REPORT ON MEASUREMENTS OF WORKABILITY AND RHEOLOGY OF FRESH CONCRETE |
| ACI 522R : 2010 | REPORT ON PERVIOUS CONCRETE |
| ASTM D 6088 : 2006 : R2016 | Standard Practice for Installation of Geocomposite Pavement Drains |
| ASTM D 6088 : 2006 | Standard Practice for Installation of Geocomposite Pavement Drains |
| ACI 371R : 2016 | GUIDE FOR THE ANALYSIS, DESIGN, AND CONSTRUCTION OF ELEVATED CONCRETE AND COMPOSITE STEEL-CONCRETE WATER STORAGE TANKS |
| ACI 301M : 2016 | SPECIFICATIONS FOR STRUCTURAL CONCRETE |
| ACI 346M : 2009 | SPECIFICATION FOR CAST-IN-PLACE CONCRETE PIPE - METRIC |
| ASTM D 6088 : 2006 : R2011 | Standard Practice for Installation of Geocomposite Pavement Drains |
| IEEE DRAFT 1254 : DRAFT 2002 | DRAFT: GUIDE FOR SOIL THERMAL STABILITY MEASUREMENTS & DATA EVALUATION |
| ASTM D 4874 : 1995 : R2001 | Standard Test Method for Leaching Solid Material in a Column Apparatus |
| ASTM D 4874 : 1995 : R2006 | Standard Test Method for Leaching Solid Material in a Column Apparatus |
| ASTM D 4874 : 1995 | Standard Test Method for Leaching Solid Material in a Column Apparatus |
| ASTM C 1479M : 2016 : REDLINE | Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric) |
| ASTM D 1557 : 2012 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| NSF 240:2017 | DRAINFIELD TRENCH PRODUCT SIZING FOR GRAVITY DISPERSAL ONSITE WASTEWATER TREATMENT AND DISPERSAL SYSTEMS |
| ACI 330.1 : 2014 | SPECIFICATION FOR UNREINFORCED CONCRETE PARKING LOTS AND SITE PAVING |
| ASTM B 789/B789M : 2016 : REDLINE | Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers |
| ASTM D 6270 : 2017 : REDLINE | Standard Practice for Use of Scrap Tires in Civil Engineering Applications |
| ASTM D 5321/D5321M : 2017 : REDLINE | TEST METHOD FOR DETERMINING THE SHEAR STRENGTH OF SOIL-GEOSYNTHETIC AND GEOSYNTHETIC-GEOSYNTHETIC INTERFACES BY DIRECT SHEAR |
| ASTM C 361M : 2016 : REDLINE | SPECIFICATION FOR REINFORCED CONCRETE LOW-HEAD PRESSURE PIPE [METRIC] |
| ASTM D 5101 : 2012 : R2017 | Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems |
| ASTM D 6836 : 2016 : REDLINE | Standard Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, or Centrifuge |
| ASCE/CI 15 17 : 2017 | STANDARD PRACTICE FOR DIRECT DESIGN OF BURIED PRECAST CONCRETE PIPE USING STANDARD INSTALLATIONS (SIDD) |
| BS ISO 10844:2014 | Acoustics. Specification of test tracks for measuring noise emitted by road vehicles and their tyres |
| DIN ISO 10844:2016-09 | Acoustics - Specification of test tracks for measuring noise emitted by road vehicles and their tyres (ISO 10844:2014) |
| ASTM B 790/B790M : 2016 : REDLINE | Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits |
| ASTM D 1883 : 2016 : REDLINE | Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils |
| PIP CVS02010 : 2016 | GEOTECHNICAL ENGINEERING INVESTIGATION SPECIFICATION |
| ASME NQA 2 : 89 SPECIAL NOTICE | QUALITY ASSURANCE REQUIREMENTS FOR NUCLEAR FACILITY APPLICATIONS |
| ACI 325.3R : 1987 | GUIDE FOR DESIGN OF FOUNDATIONS AND SHOULDERS FOR CONCRETE PAVEMENTS |
| PIP CVS02100 : 2014 | SITE PREPARATION, EXCAVATION, AND BACKFILL SPECIFICATION |
| S.R. CEN TR 15463:2007 | CHARACTERIZATION OF SLUDGES - PHYSICAL CONSISTENCY - THIXOTROPIC BEHAVIOUR AND PILING BEHAVIOUR |
| ASTM E 177 : 2014 : REDLINE | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
| ASTM D 3740 : 2012-06 | PRACTICE FOR MINIMUM REQUIREMENTS FOR AGENCIES ENGAGED IN TESTING AND/OR INSPECTION OF SOIL AND ROCK AS USED IN ENGINEERING DESIGN AND CONSTRUCTION |
| ASTM C 127 : 2015 : REDLINE | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate (Withdrawn 2024) |
| ASTM D 854 : 2014 : REDLINE | Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer (Withdrawn 2023) |
| IEEE/ASTM SI_10-2010 | American National Standard for Metric Practice |
| ASTM D 5030 : 2004 | Standard Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit |
| ASTM C 136 : 2006 | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
| ASTM E 11 : 2017 : REDLINE | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
| ASTM D 4753 : 2015 : REDLINE | Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing |
| ASTM D 4253 : 2016 : REDLINE | Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table |
| ASTM D 6026 : 2013 : REDLINE | Standard Practice for Using Significant Digits in Geotechnical Data |
| ASTM D 6913 : 2004 : EDT 2 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 653 : 2014 : REDLINE | Standard Terminology Relating to Soil, Rock, and Contained Fluids |
Summarise
Sorry this product is not available in your region.