![header thumbnail](/images/publishers\astm_cover.gif)
ASTM E 122 : 2017 : REDLINE
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
English
10-04-2017
CONTAINED IN VOL. 14.02, 2017 Defines simple methods for calculating how many units to include in a random sample in order to estimate with a specified precision, a measure of quality for all the units of a lot of material, or produced by a process.
Committee |
E 11
|
DocumentType |
Redline
|
Pages |
5
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
1.1This practice covers simple methods for calculating how many units to include in a random sample in order to estimate with a specified precision, a measure of quality for all the units of a lot of material, or produced by a process. This practice will clearly indicate the sample size required to estimate the average value of some property or the fraction of nonconforming items produced by a production process during the time interval covered by the random sample. If the process is not in a state of statistical control, the result will not have predictive value for immediate (future) production. The practice treats the common situation where the sampling units can be considered to exhibit a single (overall) source of variability; it does not treat multi-level sources of variability.
1.2The system of units for this standard is not specified. Dimensional quantities in the standard are presented only as illustrations of calculation methods. The examples are not binding on products or test methods treated.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 6641 : 2001 | TEST METHOD FOR DETERMINING THE COMPRESSIVE PROPERTIES OF POLYMER MATRIX COMPOSITE LAMINATES USING A COMBINED LOADING COMPRESSION (CLC) TEST FIXTURE |
ASTM G 137 : 1997 | Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration |
ASTM D 824 : 1994 : R1998 | Standard Test Method for Rate of Absorption of Water by Bibulous Papers |
ASTM D 7336/D7336M : 2016 : REDLINE | Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials |
ASTM C 92 : 1995 | TEST METHODS FOR SIEVE ANALYSIS AND WATER CONTENT OF REFRACTORY MATERIALS |
ASTM E 564 : 2006 | Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings |
ASTM F 766 : 1982 : R2005 | Standard Test Method for Melting Point of Waxes |
ASTM D 3434 : 2000 : R2006 | Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives |
ASTM D 6654 : 2005 : R2010 | Standard Test Method for Basic Storage Stability of a Mechanical Pump Dispenser |
MIL-PRF-49316 Revision A:1997 | TEST SET, ELECTRONIC SYSTEMS, TS-3895A/UV |
AASHTO R 42 : 2006(R 2016) | PRACTICE FOR DEVELOPING A QUALITY ASSURANCE PLAN FOR HOT MIX ASPHALT (HMA) |
ASTM E 956 : 1983 : R2010 | Standard Classification for Municipal-Mixed Nonferrous Metals (MNM) |
ASTM F 510 : 1993 : R1999 | Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method |
ACI 523.2R : 1996 | GUIDE FOR PRECAST CELLULAR CONCRETE FLOOR, ROOF AND WALL UNITS |
ASTM D 5265 : 2009 | Standard Test Method for Bridge Impact Testing |
ACI 364.4T : 2010 | TECHNOTE: DETERMINING THE LOAD CAPACITY OF A STRUCTURE WHEN AS-BUILT DRAWINGS ARE UNAVAILABLE |
ASTM D 589 : 1997 | Standard Test Method for Opacity of Paper (15°Diffuse Illuminant A, 89% Reflectance Backing and Paper Backing) |
ASTM C 92 : 1995 : R2005 | Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials |
ASTM D 3580 : 1995 : R2010 | Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products |
ASTM E 701 : 1980 : R2010 | Standard Test Methods for Municipal Ferrous Scrap |
ASTM D 8131/D8131M : 2017 | Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates |
ASTM D 3198 : 1997 : R2007 | Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures (Withdrawn 2016) |
ASTM D 3039/D3039M : 2017 : REDLINE | Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials |
ASTM E 1367 : 2003 : R2014 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
ASTM D 3833/D3833M : 1996 : R2006 | Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes |
ASTM E 456 : 2013 : REV A : EDT 2 | Standard Terminology Relating to Quality and Statistics |
ASTM D 6859 : 2011-10 | TEST METHOD FOR PILE THICKNESS OF FINISHED LEVEL PILE YARN FLOOR COVERINGS |
TAPPI T 558 : 2015 | SURFACE WETTABILITY AND ABSORBENCY OF SHEETED MATERIALS USING AN AUTOMATED CONTACT ANGLE TESTER |
AASHTO T 325 : 2004(R2016) | METHOD OF TEST FOR ESTIMATING THE STRENGTH OF CONCRETE IN TRANSPORTATION CONSTRUCTION BY MATURITY TESTS |
ASTM D 4406 : 2004 | Standard Test Method for Creep of Cylindrical Rock Core Specimens in Triaxial Compression (Withdrawn 2005) |
ASTM D 7617/D7617M : 2011 | Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars |
ASTM C 92 : 1995 : R2015 | Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials |
ASTM D 2229 : 2010 : R2014 | Standard Test Method for Adhesion Between Steel Tire Cords and Rubber (Withdrawn 2023) |
ASTM E 701 : 1980 : R1999 | Standard Test Methods for Municipal Ferrous Scrap |
ASTM D 5276 : 1998 : R2017 | Standard Test Method for Drop Test of Loaded Containers by Free Fall |
ASTM E 703 : 2014 : REDLINE | Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals |
ASTM E 456 : 2013 : REV A : R2017 : EDT 2 | Standard Terminology Relating to Quality and Statistics |
ASTM D 778 : 1997 : R2002 | Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot- Extraction and Cold-Extraction Procedures) |
ASTM D 3833/D3833M : 1996 : R2011 | Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes |
ASTM D 3813/D3813M : 1998 | Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes |
ASTM D 6295/D6295M:1998 | Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape |
ASTM D 5748 : 1995 : R2007 | Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film |
ASTM C 271/C271M : 2016 : REDLINE | Standard Test Method for Density of Sandwich Core Materials |
ASTM D 2938 : 1995 | Standard Test Method for Unconfined Compressive Strength of Intact Rock Core Specimens |
ASCE/SEI 41-17:2017 | SEISMIC EVALUATION AND RETROFIT OF EXISTING BUILDINGS |
ASTM D 828 : 2016 | Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus |
ASTM E 1432 : 2004 | Standard Practice for Defining and Calculating Individual and Group Sensory Thresholds from Forced-Choice Data Sets of Intermediate Size |
ASTM D 3410/D3410M : 2016 : REDLINE | Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading |
ASTM D 722 : 1993 : R2002 | Standard Test Method for Grease Resistance of Paper |
ASTM D 4987 : 1999 : R2008 | Standard Test Method for Tensile Breaking Strength of Perforations in One-Part Continuous Forms Paper (Withdrawn 2010) |
ASTM F 2559/F2559M : 2006 : R2010 : EDT 1 | Standard Guide for Writing a Specification for Sterilizable Peel Pouches |
ASTM D 3089 : 1997 : R2017 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes (Withdrawn 2023) |
ASTM D 5651 : 2013 : REDLINE | Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials |
ASTM D 6415/D6415M : 2006 : REV A : EDT 1 | Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite |
ASTM D 8132/D8132M : 2017 | Standard Test Method for Determination of Prepreg Impregnation by Permeability Measurement |
ASTM D 727 : 1996 : R2006 | Standard Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method (Withdrawn 2011) |
ASTM C 823/C823M : 2012 | Standard Practice for Examination and Sampling of Hardened<brk> Concrete in Constructions |
ASTM D 5731 : 2016 : REDLINE | Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications |
ASTM D 3833/D3833M : 1996 : R2001 | Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes |
ASTM D 3087 : 1991 : R1998 | Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal |
ASTM F 1499 : 2017 : REDLINE | Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV) |
ASTM D 5233 : 1992 : R2009 | Standard Test Method for Single Batch Extraction Method for Wastes |
ASTM G 137 : 1997 : R2003 | Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration |
ASTM D 2344/D2344M : 2016 : REDLINE | Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates |
ASTM D 3332 : 1999 | Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines |
ASTM E 2655 : 2014 : REDLINE | Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods |
ASTM D 5276 : 1998 | Standard Test Method for Drop Test of Loaded Containers by Free Fall |
ASTM C 92 : 1995 : R1999 | Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials |
ASTM C 429 : 2016 : REDLINE | Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture |
ASTM D 880 : 1992 : R2002 | Standard Test Method for Impact Testing for Shipping Containers and Systems |
ASTM D 4003 : 1998 : R2009 | Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems |
ASTM D 3332 : 1999 : R2016 | Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines |
ASTM B 579 : 1973 : R2015 | Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate) |
ASTM D 5748 : 1995 : R2001 | Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film |
ASTM D 7137/D7137M : 2017 : REDLINE | Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates |
ASTM D 2229 : 2010 | Standard Test Method for Adhesion Between Steel Tire Cords and Rubber |
ASTM D 6115 : 1997 | Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
ASTM D 5379/D5379M : 2012 : REDLINE | Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method |
ASTM D 5458 : 1995 | Standard Test Method for Peel Cling of Stretch Wrap Film |
ASTM E 1432 : 2004 : R2011 | Standard Practice for Defining and Calculating Individual and Group Sensory Thresholds from Forced-Choice Data Sets of<br> Intermediate Size |
ASTM D 7136/D7136M : 2015 : REDLINE | Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event |
ASTM C 394/C394M : 2016 : REDLINE | Standard Test Method for Shear Fatigue of Sandwich Core Materials |
ASTM D 5528 : 2013 : REDLINE | Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
ASTM D 6264/D6264M : 2017 : REDLINE | Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force |
ASTM D 778 : 1997 | Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot- Extraction and Cold-Extraction Procedures) |
ASTM C 92 : 1995 : R2010 | Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials |
ASTM D 7905/D7905M : 2014 | Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
ASTM D 3198 : 1997 : R2002 | Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures |
ASTM F 382 : 2017 : REDLINE | Standard Specification and Test Method for Metallic Bone Plates |
ASTM F 2232 : 2014 : REDLINE | Standard Test Method for Determining the Longitudinal Load Required to Detach High Heels from Footwear |
ASTM F 1428 : 1992 : R2017 | Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners |
ASTM D 7257 : 2006 : R2011 | Standard Test Method for Automated Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions (Withdrawn 2018) |
ASTM D 880 : 1992 : R2015 | Standard Test Method for Impact Testing for Shipping Containers and Systems |
ASTM B 579 : 1973 : R2004 | Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate) |
ASTM E 688 : 1994 : R1999 | Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing |
ASTM D 5112 : 1998 : R2003 | Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products |
ASTM D 5487 : 2016 : REDLINE | Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines |
ASTM F 766 : 1982 : R2000 : EDT 1 | Standard Test Method for Melting Point of Waxes |
ASTM E 456 : 2013 : REV A : EDT 3 | Standard Terminology Relating to Quality and Statistics |
ASTM D 5264 : 1998 | Standard Test Method for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester |
ASTM D 3434 : 2000 : R2013 | Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives |
ASTM E 1367 : 2003 : EDT 1 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
ASTM D 3665 : 2012 | Standard Practice for Random Sampling of Construction Materials |
ASTM F 1645/F1645M : 2016 : REDLINE | Standard Test Method for Water Migration in Honeycomb Core Materials |
ASTM C 366/C366M : 2016 : REDLINE | Standard Test Methods for Measurement of Thickness of Sandwich Cores |
ASTM E 1004 : 2017 : REDLINE | Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method |
ASTM D 6653 : 2001 | Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method |
ASTM D 5467/D5467M : 1997 : R2017 | Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam |
ASTM D 6856/D6856M : 2003 : R2008 : EDT 1 | Standard Guide for Testing Fabric-Reinforced "Textile" Composite Materials |
ASTM D 6804 : 2002 : R2011 | Standard Guide for Hand Hole Design in Corrugated Boxes |
ASTM D 3816/D3816M : 1996 : R2001 | Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes |
ASTM D 6833 : 2002 | Standard Test Method for Accelerated Pollutant Aging of Printing and Writing Paper by Pollution Chamber Exposure Apparatus |
ASTM D 6544 : 2012 : REDLINE | Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing |
ASTM F 1428 : 1992 : R2011 | Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners |
ASTM F 1585 : 2000 | Standard Guide for Integrity Testing of Porous Barrier Medical Packages (Withdrawn 2006) |
ASTM D 5603 : 2001 : R2015 | Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber |
ASTM D 7616/D7616M : 2011 : R2017 | Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures |
ASTM D 7078/D7078M : 2012 : REDLINE | Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method |
ASTM D 7030 : 2004 : R2009 | Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine |
ASTM D 7914/D7914M : 2014 | Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations |
ASTM D 5277 : 1992 : R2008 | Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester |
ASTM D 3665 : 2012 : R2017 | Standard Practice for Random Sampling of Construction Materials |
ASTM G 143 : 2003 | Standard Test Method for Measurement of Web/Roller Friction Characteristics |
ASTM D 6641 : 2001 | TEST METHOD FOR DETERMINING THE COMPRESSIVE PROPERTIES OF POLYMER MATRIX COMPOSITE LAMINATES USING A COMBINED LOADING COMPRESSION (CLC) TEST FIXTURE |
ASTM E 956 : 1983 : R2015 | Standard Classification for Municipal-Mixed Nonferrous Metals (MNM) |
ASTM C 50/C50M : 2013 : REDLINE | Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products |
ASTM G 143 : 2003 : R2009 | Standard Test Method for Measurement of Web/Roller Friction Characteristics |
ASTM D 6148 : 1997 | Standard Practice for the Separation and Examination of Stickies |
ASTM D 5802 : 1995 | Standard Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity Using Gravimetric Principles) |
ASTM E 1706 : 2005 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates |
ASTM D 3079 : 1994 : R2003 | Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products |
ASTM E 456 : 2013 : REV A : EDT 4 | Standard Terminology Relating to Quality and Statistics |
ASTM D 3759/D3759M : 2005 | Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes |
ASTM D 6653 : 2001 : R2006 | Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method |
ASTM D 2442 : 1975 : R1996 | Standard Specification for Alumina Ceramics for Electrical and Electronic Applications |
ASTM E 1706 : 2005 : R2010 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates (Withdrawn 2019) |
ASTM D 6101 : 1997 | Standard Test Method for Equivalent Black Area (EBA) of Dirt in Pulp, Paper and Paperboard by Image Analysis |
ASTM D 3968 : 1997 : R2002 | Standard Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures |
ASTM D 418 : 1993 | Standard Methods of Testing Pile Yarn Floor Covering Construction (Withdrawn 1998) |
ASTM E 688 : 1994 : R2011 | Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing (Withdrawn 2019) |
ASTM D 6148 : 1997 : R2007 | Standard Practice for Separation and Examination of Stickies (Withdrawn 2010) |
ASTM D 5264 : 1998 : R2011 | Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester |
ASTM D 6252/D6252M : 1998 : R2011 | Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle |
ASTM F 671 : 1999 | Standard Test Method for Measuring Flat Length on Wafers of Silicon and Other Electronic Materials (Withdrawn 2003) |
ASTM E 701 : 1980 : R2018 | Standard Test Methods for Municipal Ferrous Scrap |
ASTM D 6148 : 1997 : R2002 | Standard Practice for the Separation and Examination of Stickies |
ASTM D 3813/D3813M : 1998 : R2003 | Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes |
ASTM D 5277 : 1992 | TEST METHOD FOR PERFORMING PROGRAMMED HORIZONTAL IMPACTS USING AN INCLINED IMPACT TESTER |
ASTM B 539 : 2002 : R2008 | Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts) |
ASTM D 7205/D7205M:2006 | Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars |
ASTM G 176 : 2003 : R2009 | Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test—Cumulative Wear Method |
ASTM D 5459 : 1995 | Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film |
MIL-PRF-49177 Revision B:1997 | SCAN-INTERLACE, PL-1408/UA |
ASTM D 5603 : 2001 | Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber |
ASTM D 7248/D7248M : 2012 : R2017 | Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens |
ASTM D 5233 : 1992 : R1999 | Standard Test Method for Single Batch Extraction Method for Wastes |
ASTM F 2559/F2559M : 2006 : R2015 | Standard Guide for Writing a Specification for Sterilizable Peel Pouches |
ASTM D 3652/D3652M : 2001 : R2012 | Standard Test Method for Thickness of Pressure-Sensitive Tapes |
ASTM D 5467/D5467M : 1997 : R2010 | Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam |
ASTM G 137 : 1997 : R2017 | Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration |
ASTM D 6804 : 2002 | Standard Guide for Hand Hole Design in Corrugated Boxes |
ASTM D 2442 : 1975 : R2012 | Standard Specification for Alumina Ceramics for Electrical and Electronic Applications |
ASTM D 6344 : 2004 : R2017 | Standard Test Method for Concentrated Impacts to Transport Packages |
ASTM D 6101 : 1997 : R2005 | Standard Test Method for Equivalent Black Area (EBA) of Dirt in Pulp, Paper and Paperboard by Image Analysis (Withdrawn 2010) |
ASTM D 5112 : 1998 : R2015 | Standard Test Method for Vibration (Horizontal Linear Motion) Test of Products |
ASTM D 6641 : 2001e1 | TEST METHOD FOR DETERMINING THE COMPRESSIVE PROPERTIES OF POLYMER MATRIX COMPOSITE LAMINATES USING A COMBINED LOADING COMPRESSION (CLC) TEST FIXTURE |
ASTM F 1015 : 2003 | Standard Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces |
ASTM D 5458 : 1995 : R2012 | Standard Test Method for Peel Cling of Stretch Wrap Film |
ASTM D 3472 : 1997 | Standard Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures |
ASTM D 7250/D7250M : 2016 : REDLINE | Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness |
ASTM G 176 : 2003 : R2017 | Standard Test Method for Ranking Resistance of Plastics to Sliding Wear Using Block-on-Ring Wear Test—Cumulative Wear Method |
ASTM D 7205/D7205M : 2006 : R2016 | Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars |
ASTM D 7958/D7958M : 2017 | Standard Test Method for Evaluation of Performance for FRP Composite Bonded to Concrete Substrate using Beam Test |
ASTM D 6264 : 1998 | Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force |
ASTM B 539 : 2002 : EDT 1 | Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts) |
ASTM D 6804 : 2002 : R2015 | Standard Guide for Hand Hole Design in Corrugated Boxes |
ASTM E 956 : 1983 : R1999 | Standard Classification for Municipal-Mixed Nonferrous Metals (MNM) |
ASTM F 2502 : 2017 : REDLINE | Standard Specification and Test Methods for Absorbable Plates and Screws for Internal Fixation Implants |
ASTM C 1045 : 2007 : R2013 | Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |
ASTM D 3580 : 1995 : R1999 | Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products |
ASTM F 778 : 1988 : R2014 | Standard Methods for Gas Flow Resistance Testing of Filtration Media |
ASTM D 3813/D3813M : 1998 : R2012 : EDT 1 | Standard Test Method for Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes |
ASTM B 539 : 2002 | Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts) |
ASTM D 3332 : 1999 : R2004 | Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines |
ASTM C 364/C364M : 2016 : REDLINE | Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions |
ASTM D 6719 : 2012 : REDLINE | Standard Guide for Standard Test Methods and Practices for Evaluating Pile Yarn Floor Covering (Withdrawn 2021) |
ASTM C 1469 : 2010 : R2015 | Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature |
ASTM D 6856 : 2003 : R2008 | Standard Guide for Testing Fabric-Reinforced "Textile" Composite Materials |
ASTM D 7205/D7205M : 2006 : R2011 | Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars |
ASTM D 6654:2005 | Standard Test Method for Basic Storage Stability of a Mechanical Pump Dispenser |
ASTM C 393/C393M : 2016 : REDLINE | Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure |
ASTM D 6633:2005 | Standard Test Method for Basic Functional Stability of a Mechanical Pump Dispenser |
ASTM C 1773 : 2017 : REDLINE | Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature |
ASCE 30 00 : 2000 | GUIDELINE FOR CONDITION ASSESSMENT OF THE BUILDING ENVELOPE |
ASTM D 643 : 1997 | Standard Test Method for Folding Endurance of Paper by the Schopper Tester |
ASTM D 6115 : 1997 : R2004 | Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
ASTM G 115 : 2010 : R2013 | Standard Guide for Measuring and Reporting Friction Coefficients |
ASTM D 5650 : 1997 : R2002 | Standard Test Method for Resistance to Bending of Paper of Low Bending Stiffness (Taber-Type Tester in 0 to 10 Taber Stiffness Unit Configuration) |
ASTM D 2442 : 1975 : R2001 | Standard Specification for Alumina Ceramics for Electrical and Electronic Applications |
ASTM D 3652/D3652M : 2001 : R2006 | Standard Test Method for Thickness of Pressure-Sensitive Tapes |
ASTM D 3889/D3889M : 1996 : R2001 | Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature |
ASTM D 643 : 1997 : R2007 | Standard Test Method for Folding Endurance of Paper by the Schopper Tester (Withdrawn 2010) |
ASTM D 1596 : 2014 : REDLINE | Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material |
ASTM D 7390 : 2007 | Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments |
ASTM F 1631 : 1995 | Standard Test Method for Impact Attenuation Properties of Body Padding and Protective Wear for the Sport of Fencing (Withdrawn 2003) |
ASTM C 1862 : 2017 | Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures |
ASTM D 5450/D5450M : 2016 : REDLINE | Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders |
ASTM D 2221 : 2001 : R2015 | Standard Test Method for Creep Properties of Package Cushioning Materials |
ASTM D 6653/D6653M : 2013 : REDLINE | Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method |
ASTM D 3084 : 2005 : R2012 | Standard Practice for Alpha-Particle Spectrometry of Water |
ASTM F 3207 : 2017 | Standard Guide for <emph type="bdit">in vivo</emph> Evaluation of Rabbit Lumbar Intertransverse Process Spinal Fusion Model |
ASTM E 456 : 2013 : REV A : EDT 1 | Standard Terminology Relating to Quality and Statistics |
ASTM D 3811/D3811M : 1996 : R2018 | Standard Test Method for Unwind Force of Pressure-Sensitive Tapes |
ASTM E 1367 : 2003 : R2008 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
ASTM D 5459 : 1995 : R2001 | Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film |
ASTM C 480/C480M : 2016 : REDLINE | Standard Test Method for Flexure Creep of Sandwich Constructions |
ASTM D 3330/D3330M : 2004 : R2010 | Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape |
ASTM F 778 : 1988 : R2007 | Standard Methods for Gas Flow Resistance Testing of Filtration Media |
ASTM D 6772/D6772M : 2016 : REDLINE | Standard Test Method for Dimensional Stability of Sandwich Core Materials |
ASTM D 6856/D6856M : 2003 : R2016 | Standard Guide for Testing Fabric-Reinforced “Textile” Composite Materials |
ASTM C 1469 : 2010 | Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature |
ASTM D 3084 :2005 | Standard Practice for Alpha-Particle Spectrometry of Water |
ASTM E 688 : 1994 : R2006 | Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing |
ASTM D 7913/D7913M : 2014 | Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing |
ASTM F 3036 : 2013 | Standard Guide for Testing Absorbable Stents |
ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
ASTM D 6484/D6484M : 2014 : REDLINE | Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates |
ASTM D 4987 : 1999 | Standard Test Method for Tensile Breaking Strength of Perforations in One-Part Continuous Forms Paper |
ASTM D 3198 : 1997 | Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures |
ASTM C 365/C365M : 2016 : REDLINE | Standard Test Method for Flatwise Compressive Properties of Sandwich Cores |
ASTM D 590 : 1993 : R2002 | Standard Test Method for Petroleum Wax in Paper (Withdrawn 2009) |
ASTM D 1975 : 2016 : REDLINE | Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails |
ASTM D 5725 : 1999 : R2008 | Standard Test Method for Surface Wettability and Absorbency of Sheeted Materials Using an Automated Contact Angle Tester (Withdrawn 2010) |
ASTM D 5725 : 1999 | Standard Test Method for Surface Wettability and Absorbency of Sheeted Materials Using an Automated Contact Angle Tester |
ASTM D 4577 : 2005 : R2010 | Standard Test Method for Compression Resistance of a Container Under Constant Load |
ASTM E 456 : 2013 | Standard Terminology Relating to Quality and Statistics |
ASTM G 176 : 2003 | Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test—Cumulative Wear Method |
ASTM D 880 : 1992 : R2008 | Standard Test Method for Impact Testing for Shipping Containers and Systems |
ASTM D 5449/D5449M : 2016 : REDLINE | Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders |
MIL-PRF-49384 Revision B:1997 | OPTICAL IMAGER, SU-121/UA |
ASTM D 5112 : 1998 : R2009 | Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products |
ASTM D 5277 : 1992 : R2015 | Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester |
ASTM D 642 : 2015 : REDLINE | Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads |
ASTM G 132 : 1996 | Standard Test Method for Pin Abrasion Testing |
API 3000 : 2014 | CLASSIFYING AND LOADING OF CRUDE OIL INTO RAIL TANK CARS |
ASTM D 6833 : 2002 : EDT 1 | Standard Test Method for Accelerated Pollutant Aging of Printing and Writing Paper by Pollution Chamber Exposure Apparatus |
ASTM B 539 : 2002 : R2013 | Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts) |
ASTM E 1367 : 2003 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
ASTM D 589 : 1997 : R2007 | Standard Test Method for Opacity of Paper (15° Diffuse Illuminant <i>A</i>, 89 % Reflectance Backing and Paper Backing) (Withdrawn 2010) |
ASTM D 6252/D6252M : 1998 : R2004 | Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle |
ASTM G 211 : 2014 | Standard Test Method for Conducting Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets |
ASTM F 564 : 2017 : REDLINE | Standard Specification and Test Methods for Metallic Bone Staples |
ASTM D 778 : 1997 : R2007 | Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot-Extraction and Cold-Extraction Procedures) (Withdrawn 2010) |
ASTM D 5571 : 2016 : REDLINE | Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity |
ASTM D 777 : 1997 | Standard Test Methods for Flammability of Treated Paper and Paperboard |
ASTM F 1724 : 2001 | Standard Test Method for Measuring Surface Metal Contamination of Polycrystalline Silicon by Acid Extraction-Atomic Absorption Spectroscopy (Withdrawn 2003) |
ASTM D 3652/D3652M : 2001 | Standard Test Method for Thickness of Pressure-Sensitive Tapes |
ASTM D 3813/D3813M : 1998 : R2007 | Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes |
ASTM D 3637 : 1984 : R1991 | Standard Test Methods for Permeability of Bituminous Mixtures (Withdrawn 1998) |
ASTM D 3330/D3330M : 2004 : R2018 | Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape |
ASTM F 1015 : 2003 : R2017 | Standard Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces |
ASTM D 5459 : 1995 : R2012 | Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film |
ASTM D 3469 : 1997 : R2002 | Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures |
ASTM D 2221 : 2001 | Standard Test Method for Creep Properties of Package Cushioning Materials |
ASTM D 3330/D3330M : 2004 | Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape |
GOST R 52714:2018 | Motor gasolines. Determination of individual and group hydrocarbon composition by capillary gas сhromatography method |
ASTM D 3481 : 2006 : R2011 | Standard Test Method for Manual Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions (Withdrawn 2018) |
ASTM D 3079 : 1994 : R2009 : EDT 1 | Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products (Withdrawn 2018) |
AASHTO T 226 : 1990 | METHOD OF TEST FOR TRIAXIAL COMPRESSIVE STRENGTH OF UNDRAINED ROCK CORE SPECIMENS WITHOUT PORE PRESSURE MEASUREMENTS |
ASTM E 1706 : 2005 : EDT 1 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates |
ASTM D 979/D979M : 2015 : REDLINE | Standard Practice for Sampling Bituminous Paving Mixtures |
ASTM C 823 : 2000 | Standard Practice for Examination and Sampling of Hardened Concrete in Constructions |
ACI 228.1R : 2003 | IN-PLACE METHODS TO ESTIMATE CONCRETE STRENGTH |
ASTM F 510 : 1993 : R2008 | Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method |
ASTM D 5375/D5375M : 1998 : R2004 | Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock |
TAPPI T 570 : 0 | RESISTANCE TO MECHANICAL PENETRATION OF SANITARY TISSUE PAPERS (BALL BURST PROCEDURE) |
ASTM D 2525 : 2013 : REDLINE | Standard Practice for Sampling Wool for Moisture (Withdrawn 2022) |
ASTM D 5363 : 2016 : REDLINE | Standard Specification for Anaerobic Single-Component Adhesives (AN) |
ASTM D 5276 : 1998 : R2009 | Standard Test Method for Drop Test of Loaded Containers by Free Fall |
ASTM C 823/C823M : 2012 : R2017 | Standard Practice for Examination and Sampling of Hardened<brk/> Concrete in Constructions |
ASTM D 5342 : 1997 : R2007 | Standard Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration) (Withdrawn 2010) |
ASTM D 5459 : 1995 : R2007 | Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film |
ASTM D 5342 : 1997 | Standard Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration) |
ASTM D 7030 : 2004 : R2017 | Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine |
ASTM F 778 : 1988 : R1993 | Standard Methods for Gas Flow Resistance Testing of Filtration Media |
ASTM D 3332 : 1999 : R2010 | Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines |
ASTM D 3654/D3654M : 2006 : R2011 | Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes |
ASTM D 3472 : 1997 : R2002 | Standard Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures |
ASTM D 3469 : 1997 : R2007 | Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures (Withdrawn 2016) |
ASTM D 5264 : 1998 : R2004 | Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester |
ASTM D 3889/D3889M : 1996 : R2012 | Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature |
ASTM D 5276 : 1998 : R2004 | Standard Test Method for Drop Test of Loaded Containers by Free Fall |
ASTM D 999 : 2008 | Standard Test Methods for Vibration Testing of Shipping Containers |
ASTM F 384 : 2017 : REDLINE | Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices |
ASTM F 543 : 2017 : REDLINE | Standard Specification and Test Methods for Metallic Medical Bone Screws |
ASTM F 3014 : 2014 | Standard Test Method for Penetration Testing of Needles Used in Surgical Sutures (Withdrawn 2023) |
ASTM D 4577 : 2005 : R2018 | Standard Test Method for Compression Resistance of a Container Under Constant Load |
ASTM D 3654/D3654M : 2006 | Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes |
ASTM D 7390 : 2007 : R2012 | Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments |
ASTM D 7264/D7264M : 2015 : REDLINE | Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials |
ASTM D 5607 : 2016 : REDLINE | Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force |
ASTM D 5748 : 1995 : R2012 | Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film |
ASTM D 5748 : 1995 | Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film |
ASTM D 779 : 2016 | Standard Test Method for Determining the Water Vapor Resistance of Sheet Materials in Contact with Liquid Water by the Dry Indicator Method |
ASTM D 7332/D7332M : 2016 : REDLINE | Standard Test Method for Measuring the Fastener Pull-Through Resistance of a <brk/>Fiber-Reinforced Polymer Matrix Composite |
ASTM D 4003 : 1998 : R2015 | TEST METHODS FOR PROGRAMMABLE HORIZONTAL IMPACT TEST FOR SHIPPING CONTAINERS AND SYSTEMS |
ASTM F 510/F510M : 2014 : REDLINE | Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method |
ASTM D 999 : 2008 : R2015 | Standard Test Methods for Vibration Testing of Shipping Containers |
ASTM C 363/C363M : 2016 : REDLINE | Standard Test Method for Node Tensile Strength of Honeycomb Core Materials |
ASTM D 6833 : 2002 : EDT 2 | Standard Test Method for Accelerated Pollutant Aging of Printing and Writing Paper by Pollution Chamber Exposure Apparatus |
ASTM F 1526 : 1995 : R2000 | Standard Test Method for Measuring Surface Metal Contamination on Silicon Wafers by Total Reflection X-Ray Fluorescence Spectroscopy (Withdrawn 2003) |
ASTM D 726 : 1994 : R1999 | Standard Test Method for Resistance of Nonporous Paper to Passage of Air |
ASTM D 2938 : 1995 : R2002 | Standard Test Method for Unconfined Compressive Strength of Intact Rock Core Specimens (Withdrawn 2005) |
ASTM F 2559 : 2006 | Standard Guide for Writing a Specification for Sterilizable Peel Pouches |
ASTM D 7291/D7291M : 2015 : REDLINE | Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material |
ASTM D 3528 : 1996 : R2016 | Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading |
ASTM D 726 : 1994 : R2003 | Standard Test Method for Resistance of Nonporous Paper to Passage of Air (Withdrawn 2009) |
ASTM E 956 : 1983 : R2005 | Standard Classification for Municipal-Mixed Nonferrous Metals (MNM) |
ASTM D 6115 : 1997 : R2011 | Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
ASTM C 1045 : 2007 | Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |
ASTM G 132 : 1996 : R2007 | Standard Test Method for Pin Abrasion Testing |
ASTM F 510 : 1993 : R2004 | Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method |
ASTM E 564 : 2006 : R2012 | Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings |
ASTM D 7956/D7956M : 2016 : REDLINE | Standard Practice for Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam Flexure Specimen |
ASTM D 3811/D3811M : 1996 : R2011 | Standard Test Method for Unwind Force of Pressure-Sensitive Tapes |
ASTM D 5793 : 2018 : REDLINE | Standard Test Method for Binding Sites per Unit Length or Width of Pile Yarn Floor Coverings |
ASTM E 2548 : 2016 : REDLINE | Standard Guide for Sampling Seized Drugs for Qualitative and Quantitative Analysis |
ASTM D 5467/D5467M : 1997 : R2004 | Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam |
ASTM D 2221 : 2001 : R2010 | Standard Test Method for Creep Properties of Package Cushioning Materials |
ASTM E 456 : 2013 : REV A | Standard Terminology Relating to Quality and Statistics |
ASTM B 942 : 2010 : R2015 | Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations |
ASTM D 5603 : 2001 : R2008 | Standard Classification for Rubber Compounding Materials<span class='unicode'>—</span>Recycled Vulcanizate Particulate Rubber |
ASTM D 3889/D3889M : 1996 : R2006 | Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature |
ASTM D 2664 : 2004 | Standard Test Method for Triaxial Compressive Strength of Undrained Rock Core Specimens Without Pore Pressure Measurements (Withdrawn 2005) |
ASTM D 6252/D6252M : 1998 : R2019 | Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle |
ASTM D 589 : 1997 : R2002 | Standard Test Method for Opacity of Paper (15°Diffuse Illuminant A, 89% Reflectance Backing and Paper Backing) |
ASTM D 4353 : 1985 | Test Method for Basic Stability of a mechanical Pump Dispenser and Product (Withdrawn 1995) |
ASTM D 7616/D7616M : 2011 | Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures |
ASTM F 1015 : 2003 : R2009 | Standard Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces |
ASTM D 5725 : 1999 : R2003 | Standard Test Method for Surface Wettability and Absorbency of Sheeted Materials Using an Automated Contact Angle Tester |
ASTM D 3528 : 1996 : R2002 | Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading |
ASTM C 684 : 1999 : R2003 | Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens (Withdrawn 2012) |
ASTM D 2940/D2940M : 2015 : REDLINE | Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports |
ASTM E 970 : 2017 : REDLINE | Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source |
ASTM E 701 : 1980 : R2005 | Standard Test Methods for Municipal Ferrous Scrap |
ASTM G 77 : 2017 : REDLINE | Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test |
ASTM D 3087 : 1991 : R2004 | Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal |
ASTM D 6295/D6295M : 1998 : R2004 | Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape |
ASTM F 1541 : 2017 : REDLINE | Standard Specification and Test Methods for External Skeletal Fixation Devices |
ASTM F 1428 : 1992 : R2005 | Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners |
ASTM E 105 : 2016 : REDLINE | Standard Practice for Probability Sampling of Materials |
ASTM D 3968 : 1997 : R2007 | Standard Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures (Withdrawn 2016) |
ASTM D 5639/D5639M :2011 | Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements |
ASTM D 5458 : 1995 : R2001 | Standard Test Method for Peel Cling of Stretch Wrap Film |
ASTM D 5375/D5375M : 1998 : R2011 | Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock |
ACI 214.4R : 2010 | GUIDE FOR OBTAINING CORES AND INTERPRETING COMPRESSIVE STRENGTH RESULTS |
ASTM D 5458 : 1995 : R2007 | Standard Test Method for Peel Cling of Stretch Wrap Film |
ACI 364.1R : 2007 | GUIDE FOR EVALUATION OF CONCRETE STRUCTURES PRIOR TO REHABILITATION |
ASTM G 132 : 1996 : R2013 | Standard Test Method for Pin Abrasion Testing |
ASTM D 3816/D3816M : 1996 : R2012 | Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes |
ASTM D 727 : 1996 : R2001 | Standard Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method |
ASTM F 778 : 1988 : R2001 | Standard Methods for Gas Flow Resistance Testing of Filtration Media |
ASCE/SEI 30 14 : 2014 | GUIDELINE FOR CONDITION ASSESSMENT OF THE BUILDING ENVELOPE |
ASTM D 5375/D5375M : 1998 | Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock |
ASTM D 5233 : 1992 : R2017 | Standard Test Method for Single Batch Extraction Method for Wastes |
ASTM D 3087 : 1991 : R2009 | Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal |
ASTM G 137 : 1997 : R2009 | Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration |
ASTM D 7615/D7615M : 2011 | Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates |
ASTM D 3469 : 1997 | Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures |
ASTM D 5335 : 2014 : REDLINE | Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges (Withdrawn 2023) |
ASTM C 1532/C1532M : 2012 | Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction |
ASTM D 6548 : 2000 | Standard Test Method for Resistance to Mechanical Penetration of Sanitary Tissue Papers (Ball Burst Procedure) |
ASTM B 579 : 1973 : R1999 | Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate) |
ASTM D 5342 : 1997 : R2002 | Standard Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration) |
ASTM D 4687 : 2014 : REDLINE | Standard Guide for General Planning of Waste Sampling |
ASTM C 1470 : 2006 : R2013 | Standard Guide for Testing the Thermal Properties of Advanced Ceramics |
ASTM D 3079 : 1994 : R1999 | Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products |
ASTM D 7617/D7617M : 2011 : R2017 | Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars |
ASTM D 2940 : 2003 | Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports |
ASTM D 2442 : 1975 : R2016 | Standard Specification for Alumina Ceramics for Electrical and Electronic Applications |
ASTM D 5455 : 1993 : R1998 | Standard Test Method for Short-Term Liquid Sorption Into Paper (Bristow Test) |
ASTM D 6344 : 2004 : R2009 | Standard Test Method for Concentrated Impacts to Transport Packages |
ASTM D 5455 : 1993 : R2003 | Standard Test Method for Short-Term Liquid Sorption Into Paper (Bristow Test) (Withdrawn 2011) |
ASTM D 75 : 2003 | Standard Practice for Sampling Aggregates |
ASTM D 727 : 1996 | Standard Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method |
GOST 849:2018 | Primary nickel. SpecificationsE |
ASTM D 722 : 1993 : R2007 | Standard Test Method for Grease Resistance of Paper (Withdrawn 2010) |
ASTM D 6804 : 2002 : R2007 | Standard Guide for Hand Hole Design in Corrugated Boxes |
ASTM D 5233 : 1992 : R2004 | Standard Test Method for Single Batch Extraction Method for Wastes |
ASTM D 643 : 1997 : R2002 | Standard Test Method for Folding Endurance of Paper by the Schopper Tester |
ASTM D 4405 : 2004 | Standard Test Method for Creep of Cylindrical Soft Rock Core Specimens in Uniaxial Compressions (Withdrawn 2005) |
ASTM G 83 : 1996 | Standard Test Method for Wear Testing with a Crossed-Cylinder Apparatus (Withdrawn 2005) |
ASTM D 7248/D7248M : 2012 | Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens |
ASTM D 7241 : 2013 : REDLINE | Standard Test Method for Pile Thickness of Finished Multilevel Pile Yarn Floor Covering (Withdrawn 2022) |
ASTM B 942 : 2010 : EDT 1 | Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations |
ASTM D 4987 : 1999 : R2003 | Standard Test Method for Tensile Breaking Strength of Perforations in One-Part Continuous Forms Paper |
ASTM D 3811/D3811M : 1996 : R2006 | Standard Test Method for Unwind Force of Pressure-Sensitive Tapes |
ASTM D 7026 : 2013 | Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis (Withdrawn 2020) |
ASTM D 3652M : 1993 | Standard Test Method for Thickness of Pressure-Sensitive and Gummed Tapes [Metric] (Withdrawn 1998) |
ASTM D 5650 : 1997 : R2007 | Standard Test Method for Resistance to Bending of Paper of Low Bending Stiffness (Taber-Type Tester in 0 to 10 Taber Stiffness Unit Configuration) (Withdrawn 2010) |
AASHTO R 42 : 2006 : R2011 | PRACTICE FOR DEVELOPING A QUALITY ASSURANCE PLAN FOR HOT MIX ASPHALT (HMA) |
ASTM G 76 : 2013-07 | TEST METHOD FOR CONDUCTING EROSION TESTS BY SOLID PARTICLE IMPINGEMENT USING GAS JETS |
ASTM E 382 : 2012 : REDLINE | Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets |
ASTM C 1420 : 2005 | Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units Placed in Usage (Withdrawn 2006) |
ASTM PS 5 : 1994 | Test Method for Static and Dynamic Test Method for Spinal Implants Assembly in a Corpectomy Model (Withdrawn 1997) |
ASTM D 5802 : 1995 : R2001 | Standard Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity Using Gravimetric Principles) (Withdrawn 2009) |
ASTM E 456 : 2013 : REV A : R2017 : EDT 1 | Standard Terminology Relating to Quality and Statistics |
ASTM D 6833 : 2002 : R2007 | Standard Test Method for Accelerated Pollutant Aging of Printing and Writing Paper by Pollution Chamber Exposure Apparatus (Withdrawn 2011) |
ASTM D 7565/D7565M : 2010 | Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures |
ASTM D 5650 : 1997 | Standard Test Method for Resistance to Bending of Paper of Low Bending Stiffness (Taber-Type Tester in 0 to 10 Taber Stiffness Unit Configuration) |
ASTM D 3528 : 1996 | Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading |
ASTM D 824 : 1994 : R2007 | Standard Test Method for Rate of Absorption of Water by Bibulous Papers (Withdrawn 2010) |
ASTM D 3759/D3759M : 2005 : R2011 | Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape |
ASTM D 5112 : 1998 | Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products |
ASTM D 3472 : 1997 : R2007 | Standard Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures (Withdrawn 2016) |
ASTM D 4577 : 2005 | Standard Test Method for Compression Resistance of a Container Under Constant Load |
ASTM D 3816/D3816M : 1996 : R2003 | Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes |
ASTM D 880 : 1992 : R1997 | Standard Test Method for Impact Testing for Shipping Containers and Systems |
ASTM D 3816/D3816M : 1996 : R2007 | Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes |
MIL-PRF-49166 Revision C:1999 | Mechanical Scanner, MX-9872(V)/UA; General Specification for (No S/S Document) |
ASTM F 1428 : 1992 : R1999 | Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners |
ASTM D 2176 : 2016 | Standard Test Method for Folding Endurance of Paper and Plastics Film by the M.I.T. Tester |
ASTM D 6790/D6790M : 2016 : REDLINE | Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores |
ASTM D 7030 : 2004 | Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine |
ASTM G 143 : 2003 : R2013 | Standard Test Method for Measurement of Web/Roller Friction Characteristics |
ASTM D 3580 : 1995 : R2004 | Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products |
ASTM D 6295/D6295M : 1998 : R2011 | Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape |
ASTM D 5961/D5961M : 2017 : REDLINE | Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates |
ASTM D 5277 : 1992 : R2002 | Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester |
ASTM D 75/D75M : 2014 : REDLINE | Standard Practice for Sampling Aggregates |
ASTM G 143 : 2003 : R2004 | Standard Test Method for Measurement of Web/Roller Friction Characteristics |
ACI 437R : 2003 | STRENGTH EVALUATION OF EXISTING CONCRETE BUILDINGS |
ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM D 5448/D5448M : 2016 : REDLINE | Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders |
ASTM D 824 : 1994 : R2002 | Standard Test Method for Rate of Absorption of Water by Bibulous Papers |
ASTM D 5277 : 1992 : R1997 | Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester |
ASTM D 6856 : 2003 | Standard Guide for Testing Fabric-Reinforced "Textile" Composite Materials |
TAPPI T 561 : 0 | SORPTIVE RATE AND CAPACITY OF BIBULOUS PAPER PRODUCTS USING GRAVIMETRIC PRINCIPLES |
ASTM C 613M : 1997 : R2008 : EDT 1 | Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction |
ASTM D 2442 : 1975 : R2007 | Standard Specification for Alumina Ceramics for Electrical and Electronic Applications |
ASTM D 6252/D6252M : 1998 | Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle |
ASTM D 6548 : 2000 : R2005 | Standard Test Method for Resistance to Mechanical Penetration of Sanitary Tissue Papers (Ball Burst Procedure) (Withdrawn 2011) |
ASTM D 3481 : 2006 | Standard Test Method for Manual Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions |
ASTM E 2629 : 2011 | Standard Guide for Verification of Process Analytical Technology (PAT) Enabled Control Systems |
ASTM D 3811/D3811M : 1996 : R2001 | Standard Test Method for Unwind Force of Pressure-Sensitive Tapes |
ASTM C 297/C297M : 2016 : REDLINE | Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions |
ASTM D 3022 : 1984 : R1996 : EDT 1 | Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill |
ASTM D 8155 : 2017 | Standard Practice for Shake Extraction of Solid Mining and Metallurgical Processing Waste with Water |
ASTM D 6633 : 2005 : R2010 | Standard Test Method for Basic Functional Stability of a Mechanical Pump Dispenser |
ASTM C 1470 : 2006 | Standard Guide for Testing the Thermal Properties of Advanced Ceramics |
ASTM D 7565/D7565M : 2010 : R2017 | Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures |
ASTM G 115 : 2010 | Standard Guide for Measuring and Reporting Friction Coefficients |
ASTM D 3434 : 2000 | Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives |
ASTM D 5265 : 2009 : R2016 | Standard Test Method for Bridge Impact Testing |
ASTM D 7522/D7522M : 2015 : REDLINE | Standard Test Method for Pull-Off Strength for FRP Laminate Systems Bonded to Concrete Substrate |
ASTM G 132 : 1996 : R2018 | Standard Test Method for Pin Abrasion Testing |
ASTM D 590 : 1993 : R1997 | Standard Test Method for Petroleum Wax in Paper |
ASTM D 6873 : 2003 | Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates |
ASTM C 684 : 1999 | Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens |
ASTM G 105 : 2016 | Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests |
ASTM D 6344 : 2004 | Standard Test Method for Concentrated Impacts to Transport Packages |
ASTM D 7070 : 2016 : REDLINE | Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature |
ASTM F 1089 : 2018 : REDLINE | Standard Test Method for Corrosion of Surgical Instruments |
ASTM D 3968 : 1997 | Standard Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures |
ASTM D 4003 : 1998 | Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems |
ASTM D 3528 : 1996 : R2008 | Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading |
ASTM D 4003 : 1998 : R2003 | Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems |
ASTM D 3434 : 2000 : R2018 | Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives |
ASTM B 942 : 2010 | Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations |
ASTM C 1292 : 2016 : REDLINE | Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures |
ASTM D 724 : 1999 | Standard Test Method for Surface Wettability of Paper (Angle-of-Contact Method) |
ASTM D 4611 : 2016 : REDLINE | Standard Test Method for Specific Heat of Rock and Soil |
ASTM D 6415/D6415M : 2006 | Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite |
ASTM D 6415/D6415M : 2006 : REV A : R2013 | Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite |
ASTM B 579 : 1973 : R2009 | Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate) |
ASTM D 3580 : 1995 : R2015 | Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products |
ASTM D 5639/D5639M : 2011 : R2015 | Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements |
ASTM D 7257 : 2006 | Standard Test Method for Automated Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions |
ASTM G 132 : 1996 : R2001 | Standard Test Method for Pin Abrasion Testing |
ASTM D 3987 : 2012 : REDLINE | Standard Practice for Shake Extraction of Solid Waste with Water |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.