ASTM E 260 : 1996
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Packed Column Gas Chromatography
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Superseded by
Language(s)
English
Published date
01-01-2001
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 03.06, 2015 Describes the application of gas chromatography (GC) with packed columns for the separation and analysis of vaporizable or gaseous organic and inorganic mixtures and as a reference for the writing and reporting of GC methods.
| Committee |
E 13
|
| DocumentType |
Standard Practice
|
| Pages |
0
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This practice is intended to serve as a general guide to the application of gas chromatography (GC) with packed columns for the separation and analysis of vaporizable or gaseous organic and inorganic mixtures and as a reference for the writing and reporting of GC methods.
Note 1--This practice excludes any form of gas chromatography associated with open tubular (capillary) columns.
1.2 This standard does not purport to address all the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 8 and 9.1.3.| MIL-PRF-24596 Revision B:2009 | COATING COMPOUNDS, NONFLAMING, FIRE-RESISTANT |
| ASTM D 5177 : 1991 : R1996 | Standard Guide for Waste Acceptance at Hazardous Waste Incinerators (Withdrawn 2005) |
| ASTM D 5075 : 2001 | Standard Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air |
| BS ISO 4925:2005 | Road vehicles. Specification of non-petroleum-base brake fluids for hydraulic systems |
| ASTM E 594 : 1996 : R2011 | Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography |
| TT-S-735 Revision A:1988 | STANDARD TEST FLUIDS, HYDROCARBON |
| 06/30130866 DC : DRAFT OCT 2006 | EN ISO 14175 - WELDING CONSUMABLES - SHIELDING GASES FOR FUSION WELDING AND ALLIED PROCESSES |
| MIL-PRF-24667 Revision C:2008 | COATING SYSTEM, NON-SKID, FOR ROLL, SPRAY, OR SELF-ADHERING APPLICATION |
| MIL-A-27420 Base Document:1970 | AIR, LIQUID, FOR BREATHING PURPOSES |
| ASTM F 1884 : 2004 : R2011 | Standard Test Method for Determining Residual Solvents in Packaging Materials |
| AASHTO PP 73 : 2013 : R2015 | PRACTICE FOR QUALITY ASSURANCE, JOB SITE QUALITY CONTROL, AND REAPPLICATION OF PROTECTIVE SEALERS FOR PORTLAND CEMENT CONCRETE |
| ASTM D 4937 : 1996 : R2017 | Standard Test Method for <emph type="ital">p</emph>-Phenylenediamine Antidegradants Purity by Gas Chromatography |
| ASTM D 2504 : 1988 : R1998 | Standard Test Method for Noncondensable Gases in C<sub>2</sub> and Lighter Hydrocarbon Products by Gas Chromatography |
| ASTM D 7475 : 2011 | Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions |
| I.S. EN ISO 14175:2008 | WELDING CONSUMABLES - GASES AND GAS MIXTURES FOR FUSION WELDING AND ALLIED PROCESSES |
| MIL-DTL-24441 Revision D:2009 | PAINT, EPOXY-POLYAMIDE, GENERAL SPECIFICATION FOR |
| ASTM D 4735 : 2015 : REDLINE | TEST METHOD FOR DETERMINATION OF TRACE THIOPHENE IN REFINED BENZENE BY GAS CHROMATOGRAPHY |
| ASTM D 4937 : 1996 : EDT 1 | Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography |
| TT-P-24 Revision E:1985 | PAINT, OIL (EXTERIOR CONCRETE AND MASONRY |
| MIL-PRF-32171 Revision B:2009 | DECK COATINGS, HIGH DURABILITY |
| ASTM E 741 : 2011 : R2017 | Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution |
| ASTM E 1510 : 1995 : R2013 : EDT 1 | Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs |
| ASTM E 1747 :1995 | Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications |
| ASTM D 3271 : 1987 : R2006 | Standard Practice for Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent Analysis |
| ASTM D 4747 : 2002 : R2008 | Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography |
| ASTM E 516 : 1995 : REV A : R2005 | Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography |
| ASTM D 3329 : 2003 | Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography |
| ASTM E 1747 : 1995 : R2000 | Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications |
| ASTM D 1946 : 1990 : R2015 : EDT 1 | Standard Practice for Analysis of Reformed Gas by Gas Chromatography |
| ASTM F 1519 : 1998 : R2008 | Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products |
| ASTM D 2908 : 1991 : R2005 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography |
| ASTM E 594 : 1996 : R2001 | Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography |
| ASTM D 2780 : 1992 : R2007 | Standard Test Method for Solubility of Fixed Gases in Liquids (Withdrawn 2010) |
| ASTM E 1140 : 1995 : R2010 : EDT 1 | Standard Practice for Testing Nitrogen/Phosphorus Thermionic Ionization Detectors for Use In Gas Chromatography |
| ASTM D 3362 : 2005 | Standard Test Method for Purity of Acrylate Esters by Gas Chromatography (Withdrawn 2011) |
| ASTM D 4747 : 2002 | Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography |
| ASTM E 594:1996 | Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography |
| ASTM F 1308 : 1998 : R2008 | Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products |
| ASTM D 5075 : 2001 : R2007 | Standard Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air |
| ASTM F 1519 : 1998 : R2014 | Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products |
| ASTM E 1140 : 1995 : R2005 | Standard Practice for Testing Nitrogen/Phosphorus Thermionic Ionization Detectors for Use In Gas Chromatography |
| ASTM E 840 : 1995 : R2013 | Standard Practice for Using Flame Photometric Detectors in Gas Chromatography |
| ASTM D 2580 : 2006 : R2012 | Standard Test Method for Phenols in Water by Gas-Liquid Chromatography (Withdrawn 2021) |
| ASTM D 4128 : 2006 : R2012 | Standard Guide for Identification and Quantitation of Organic Compounds in Water by Combined Gas Chromatography and Electron Impact Mass Spectrometry |
| ASTM D 1946 : 1990 : R2006 | Standard Practice for Analysis of Reformed Gas by Gas Chromatography |
| ASTM D 5442 : 2017 : REDLINE | Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography |
| ASTM E 1698 : 1995 : R2017 | Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography |
| ASTM D 3465 : 2014 : REDLINE | Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography |
| DIN EN 15536:2007-06 | Derivatives from coal pyrolysis - Coal tar based oils: wash oils - Specifications and test methods |
| ASTM D 3612 : 2002 : EDT 1 | Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography |
| ASTM D 4424 : 2009 : R2014 | Standard Test Method for Butylene Analysis by Gas Chromatography (Withdrawn 2023) |
| ASTM D 3257 : 2006 | Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography |
| ASTM D 3452 : 2006 : R2017 | Standard Practice for Rubber—Identification by Pyrolysis-Gas Chromatography |
| TT-P-29 Revision K:1991 | PAINT, LATEX |
| ASTM D 3283 : 1998 : R2004 | Standard Specification for Air as an Electrical Insulating Material |
| ASTM D 1946 : 1990 : R2011 | Standard Practice for Analysis of Reformed Gas by Gas Chromatography |
| ASTM D 4457 : 2002 : R2014 | Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph (Withdrawn 2019) |
| MIL P 24441 : B | PAINT, EPOXY POLYAMIDE, GENERAL SPECIFICATION FOR |
| ASTM D 4128:2006 | Standard Guide for Identification and Quantitation of Organic Compounds in Water by Combined Gas Chromatography and Electron Impact Mass Spectrometry |
| ASTM D 2908 : 1991 : R2017 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography |
| ASTM D 3834 : 1993 | Test Method for Purity of Vinyl Chloride Monomer by Gas Chromatography (Withdrawn 1998) |
| ASTM E 1698 : 1995 : R2000 | Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography |
| TT C 2114 : 0 | COATING, OBLITERATING |
| MIL-PRF-32170 Revision A:2006 | DECK TILES, WEAR-RESISTANT |
| ASTM D 3429 : 1993 : R2007 | Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids |
| ASTM D 3054 : 1998 | Standard Test Methods for Analysis of Cyclohexane by Gas Chromatography (Withdrawn 2007) |
| ASTM E 594 : 1996 : R2006 | Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography |
| ASTM D 4457 : 2002 | Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph |
| ASTM E 516 : 1995 : REV A : R2013 | Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography |
| ASTM D 1933 : 2003 : R2017 | Standard Specification for Nitrogen Gas as an Electrical Insulating Material |
| ASTM D 2505 : 1988 : R2004 : EDT 1 | Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography |
| ASTM E 1642 : 2000 : R2005 | Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis |
| ASTM D 4626 : 1995 : R2005 | Standard Practice for Calculation of Gas Chromatographic Response Factors |
| ASTM D 3545 : 2006 | Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography |
| ASTM E 1642 : 2000 : R2016 | Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis |
| ASTM F 1500 : 1998 : R2008 | Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants |
| AWS A5.32/A5.32M : 2011 | WELDING CONSUMABLES - GASES AND GAS MIXTURES FOR FUSION WELDING AND ALLIED PROCESSES |
| ASTM D 7504 : 2018 : REDLINE | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
| SAE J 3042 : 2015 | MEASURING PROPERTIES OF LI-BATTERY ELECTROLYTE |
| ASTM D 3452 : 2006 : R2012 | Standard Practice for Rubber—Identification by Pyrolysis-Gas Chromatography |
| ASTM E 697 : 1996 : R2011 | Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography |
| ASTM D 4937 : 1996 : R2012 | Standard Test Method for <emph type="ital">p</emph>-Phenylenediamine Antidegradants Purity by Gas Chromatography |
| ASTM D 5511 : 2018 : REDLINE | Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions |
| ASTM E 1140 : 1995 : R2000 | Standard Practice for Testing Nitrogen/Phosphorus Thermionic Ionization Detectors for Use In Gas Chromatography |
| ASTM D 1946 : 1990 : R2000 | Standard Practice for Analysis of Reformed Gas by Gas Chromatography |
| ASTM E 1140 : 1995 : R2017 | Standard Practice for Testing Nitrogen/Phosphorus Thermionic Ionization Detectors for Use In Gas Chromatography |
| ASTM D 1933 : 2003 : R2008 | Standard Specification for Nitrogen Gas as an Electrical Insulating Material |
| ASTM D 3525 : 2004 : R2016 | Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography |
| ASTM D 4526 : 2012 : REDLINE | Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography |
| ASTM D 2504 : 1988 : R2010 | Standard Test Method for Noncondensable Gases in C<sub>2</sub> and Lighter Hydrocarbon Products by Gas Chromatography |
| ASTM E 1698 : 1995 : R2005 | Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography |
| ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
| BS EN 15536:2007 | Derivatives from coal pyrolysis. Coal tar based oils. Wash oils. Specifications and test methods |
| ASME PV CODE 2C : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - SPECIFICATIONS FOR WELDING RODS, ELECTRODES, AND FILLER METALS |
| ASTM D 2685 : 2011 : REDLINE | Standard Test Method for Air and Carbon Tetrafluoride in Sulfur Hexafluoride by Gas Chromatography |
| TT-E-2784 Revision A:1991 | ENAMEL (ACRYLIC EMULSION, EXTERIOR GLOSS AND SEMIGLOSS) |
| ASTM F 1308 : 1998 | Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products |
| ISO 4925:2005 | Road vehicles Specification of non-petroleum-base brake fluids for hydraulic systems |
| ASTM E 840 : 1995 | Standard Practice for Using Flame Photometric Detectors in Gas Chromatography |
| ASTM D 2504 : 1988 : R2004 : EDT 1 | Standard Test Method for Noncondensable Gases in C<sub>2</sub> and Lighter Hydrocarbon Products by Gas Chromatography |
| ASTM E 516 : 1995 : REV A | Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography |
| MIL-PRF-23236 Revision D:2009 | Coating Systems for Ship Structures |
| ASTM E 1510 : 1995 : R2005 | Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs |
| ASTM E 1698 : 1995 : R2010 | Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography |
| ASTM D 7164 : 2010 | Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography |
| ASTM F 1519 : 1998 | Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products |
| 03/106442 DC : DRAFT APR 2003 | ISO 4925 - ROAD VEHICLES - SPECIFICATION FOR NON-PETROLEUM BASE FLUIDS FOR HYDRAULIC SYSTEMS |
| ASTM F 1500 : 1998 | Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants |
| ASTM D 4492 : 2010 | Standard Test Method for Analysis of Benzene by Gas Chromatography (Withdrawn 2018) |
| ASTM F 1308 : 1998 : R2014 | Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products |
| TT-C-498 Revision C:1980 | COATING COMPOUND, BITUMINOUS, FILLERS, SOLVENT TYPE, ALUMINUM PIGMENTED |
| AASHTO TP 96 : 2013 | METHOD OF TEST FOR PROTECTIVE SEALERS FOR PORTLAND CEMENT CONCRETE |
| ASTM F 1308 : 1998 : R2018 | Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products |
| ASTM F 1500 : 1998 : R2003 | Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants |
| GOST R 52714:2018 | Motor gasolines. Determination of individual and group hydrocarbon composition by capillary gas сhromatography method |
| SAE J 1703 : 2016 | MOTOR VEHICLE BRAKE FLUID |
| DKD-R 3-5 :2018 | PRACTICE FOR QUALITY ASSURANCE, JOB SITE QUALITY CONTROL, AND REAPPLICATION OF PROTECTIVE SEALERS FOR PORTLAND CEMENT CONCRETE |
| ASTM D 2504 : 1988 : R2015 | Standard Test Method for Noncondensable Gases in C<inf>2</inf> and Lighter Hydrocarbon Products by Gas Chromatography (Withdrawn 2024) |
| ASTM D 4026 : 2006 : R2012 | Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene |
| ASTM D 2505 : 1988 : R2015 | Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography (Withdrawn 2024) |
| ASTM E 1642 : 2000 | Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis |
| ASTM D 4937 : 1996 : R2006 : EDT 1 | Standard Test Method for<i>p</i>-Phenylenediamine Antidegradants Purity by Gas Chromatography |
| ASTM D 2908 : 1991 : R2011 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography |
| ASTM D 2195 : 2005 | Standard Test Methods for Pentaerythritol (Withdrawn 2011) |
| ASTM E 1747 : 1995 : R2005 | Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications |
| ASTM E 697 : 1996 : R2006 | Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography |
| ASTM D 5338 : 2015 : REDLINE | Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic Temperatures |
| ASTM D 2908 : 1991 : R2001 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography |
| ASTM E 516 : 1995 : REV A : R2000 | Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography |
| ASTM D 3271 : 1987 : R2012 | Standard Practice for Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent Analysis (Withdrawn 2019) |
| ASTM D 4747 : 2002 : R2014 | Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography (Withdrawn 2019) |
| ASTM D 3429 : 1993 : R2012 | Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids (Withdrawn 2017) |
| ASTM D 5075 : 2001 : R2012 : EDT 1 | Standard Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air |
| ASTM D 4768 : 2011 : REDLINE | Standard Test Method for Analysis of 2,6-Ditertiary-Butyl Para-Cresol and 2,6-Ditertiary-Butyl Phenol in Insulating Liquids by Gas Chromatography |
| ASTM D 3524 : 2014 | Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography |
| ASTM E 697 : 1996 | Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography |
| MIL-M-48767 Base Document:1975 | Methyl Formate (For Use In Ammunition) |
| ASTM D 3452 : 2006 | Standard Practice for Rubber—Identification by Pyrolysis-Gas Chromatography |
| TT-E-505 Revision B:1985 | ENAMEL, (ODORLESS, ALKYD, INTERIOR, HIGH GLOSS) |
| ASTM D 5812 : 1996 | Standard Test Method for Determination of Organochlorine Pesticides in Water by Capillary Column Gas Chromatography |
| TT P 002118 : LATEST | PAINT, TREE MARKING |
| ASTM E 1140 : 1995 | Standard Practice for Testing Nitrogen/Phosphorus Thermionic Ionization Detectors for Use In Gas Chromatography |
| ASTM F 1884 : 2004 | Standard Test Method for Determining Residual Solvents in Packaging Materials |
| ASTM E 1510 : 1995 : R2000 | Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs |
| BS EN ISO 14175:2008 | Welding consumables. Gases and gas mixtures for fusion welding and allied processes |
| ASTM D 3283 : 1998 : R2012 | Standard Specification for Air as an Electrical Insulating Material |
| ASTM D 7360 : 2016 : REDLINE | Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration |
| ASTM E 1230 : 1996 | Test Method for the Approximate Determination of Low Molecular Weight Hydrocarbons in Anhydrous Hydrogen Fluoride (Withdrawn 2001) |
| ASTM D 5075 : 2001 : R2017 : EDT 1 | Standard Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air |
| ASTM D 2505 : 1988 : R1998 | Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography |
| TT-S-190 Revision F:1981 | SEALER, SANDING, LACQUER TYPE (FOR WOOD FURNITURE) |
| ASTM D 3421 : 1975 | Recommended Practice for Extraction and Determination of Plasticizer Mixtures from Vinyl Chloride Plastics (Withdrawn 1987) |
| ASTM D 2580 : 2006 | Standard Test Method for Phenols in Water by Gas-Liquid Chromatography |
| ASTM E 1642 : 2000 : R2010 | Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis |
| ASTM D 4626 : 1995 : R2000 | Standard Practice for Calculation of Gas Chromatographic Response Factors |
| ASTM D 3329 : 2003 : R2017 | Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography |
| ASTM D 2306 : 2000 | Standard Test Method for C<sub>8</sub> Aromatic Hydrocarbon Analysis by Gas Chromatography (Withdrawn 2006) |
| ASTM D 1933 : 2003 | Standard Specification for Nitrogen Gas as an Electrical Insulating Material |
| ASTM D 3612 : 2002 : R2017 | Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography |
| ASTM D 4626 : 1995 : R2015 | Standard Practice for Calculation of Gas Chromatographic Response Factors |
| ASTM D 4626 : 1995 : R2010 | Standard Practice for Calculation of Gas Chromatographic Response Factors |
| ASTM D 3271 : 1987 : R2001 | Standard Practice for Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent Analysis |
| ASTM D 3798 : 2003 | Standard Test Method for Analysis of <i>p</i>-Xylene by Gas Chromatography (Withdrawn 2009) |
| ASTM E 840 : 1995 : R2005 | Standard Practice for Using Flame Photometric Detectors in Gas Chromatography |
| ASTM D 4275 : 2017 : REDLINE | Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene–Vinyl Acetate (EVA) Copolymers by Gas Chromatography |
| ASTM D 2780 : 1992 : R2002 : EDT 1 | Standard Test Method for Solubility of Fixed Gases in Liquids |
| ASTM E 1510 : 1995 | Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| EN ISO 14175:2008 | Welding consumables - Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008) |
| EN 15536:2007 | Derivatives from coal pyrolysis - Coal tar based oils: wash oils - Specifications and test methods |
| ASTM E 697 : 1996 : R2001 | Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography |
| ASTM E 1747 : 1995 : R2011 | Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications |
| ASTM D 5812 : 1996 : R2002 : EDT 1 | Standard Test Method for Determination of Organochlorine Pesticides in Water by Capillary Column Gas Chromatography (Withdrawn 2011) |
| UNI EN ISO 14175 : 2008 | WELDING CONSUMABLES - GASES AND GAS MIXTURES FOR FUSION WELDING AND ALLIED PROCESSES |
| DWA-M 143-20:2018 | TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
| ASTM F 151 : 1986 : R1997 | Standard Test Method for Residual Solvents in Flexible Barrier Materials (Withdrawn 2004) |
| AASHTO TP 96 : 2013 (R2018) | METHOD OF TEST FOR PROTECTIVE SEALERS FOR PORTLAND CEMENT CONCRETE |
| ASTM F 1500 : 1998 : R2014 | Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants |
| ASTM D 3329 : 2003 : R2009 | Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography |
| NASA KSC SPEC P 0025 : 2002 | PROPYLENE GLYCOL MONOMETHYL ETHER (PGME) 1-METHOXY-2-PROPANOL, SPECIFICATION FOR |
| DIN EN ISO 14175:2008-06 | WELDING CONSUMABLES - GASES AND GAS MIXTURES FOR FUSION WELDING AND ALLIED PROCESSES |
| ASTM D 3257 : 2006 : R2012 | Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography (Withdrawn 2021) |
| ASTM E 1698 : 1995 | Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography |
| ASTM D 1945 : 2014 : REDLINE | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
| ASTM E 741 : 2011 | Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution |
| MIL-A-28844 Revision A:1986 | ANTIWETTING COMPOUND 3-HEPT |
| ASTM E 899 : 1982 : R1987 | Guide for Records Management in Mass Spectrometry Laboratories Performing Analysis in Support of Nonclinical Laboratory Studies (Withdrawn 1992) |
| ASTM D 4026 : 2006 : R2017 | Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene |
| TT-E-001384 Base Document:1979 | ENAMEL, GLOSS, SYNTHETIC (FOR METAL EQUIPMENT) |
| ASTM D 4937 : 1996 : R2001 | Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography |
| ASTM D 2780 : 1992 : R1997 | Standard Test Method for Solubility of Fixed Gases in Liquids |
| SAE J 1704 : 2016 | MOTOR VEHICLE BRAKE FLUID BASED UPON GLYCOLS, GLYCOL ETHERS AND THE CORRESPONDING BORATES |
| ASTM D 3525:2004 | Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography |
| ASTM F 1519 : 1998 : R2003 | Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 3271 : 1987 : R1993 : EDT 1 | Standard Practice for Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent Analysis |
| ASTM D 7164 : 2010 : R2015 | Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography |
| ASTM D 8098 : 2017 | Standard Test Method for Permanent Gases in C<inf>2</inf> and C<inf>3</inf> Hydrocarbon Products by Gas Chromatography and Pulse Discharge Helium Ionization Detector |
| ASTM D 3612 : 2002 : R2009 | Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography |
| ASTM D 2505 : 1988 : R2010 | Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography |
| ASTM D 3612 : 2002 | Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography |
| ASTM D 4457 : 2002 : R2008 | Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph |
| ASTM F 1308 : 1998 : R2003 | Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products |
| ASTM D 3525 : 2004 : R2010 | Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography |
| ASTM D 3545 : 2006 : R2012 | Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography (Withdrawn 2021) |
| ASTM E 1387 : 2001 | Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography (Withdrawn 2010) |
| ASTM D 3283 : 1998 | Standard Specification for Air as an Electrical Insulating Material |
| ASTM D 4420 : 1994 | Standard Test Method for Determination of Aromatics in Finished Gasoline by Gas Chromatography) |
| ASTM D 3760 : 2018 : REDLINE | Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography |
| ASTM D 3742 : 1998 | Standard Test Method for 1,1,1-Trichloroethane Content (Withdrawn 2003) |
| ASTM D 4534 : 1999 | Standard Test Method for Benzene Content of Cyclic Products by Gas Chromatography (Withdrawn 2006) |
| ASTM D 4424 : 2009 | Standard Test Method for Butylene Analysis by Gas Chromatography |
| ASTM D 3429 : 1993 : R2002 : EDT 1 | Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids |
| ASTM E 840 : 1995 : R2000 | Standard Practice for Using Flame Photometric Detectors in Gas Chromatography |
| ASTM D 4026 : 2006 | Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene |
| ASTM D 3429 : 1993 : R1998 | Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids |
| ISO 14175:2008 | Welding consumables — Gases and gas mixtures for fusion welding and allied processes |
| CGA HB : 2013 | HANDBOOK OF COMPRESSED GASES |
| CGA P 9 : 2015 | THE INERT GASES: ARGON, NITROGEN, AND HELIUM |
| CGA P 1 : 2015 | STANDARD FOR SAFE HANDLING OF COMPRESSED GASES IN CONTAINERS |
| CGA G 5.4 : 2012 | STANDARD FOR HYDROGEN PIPING SYSTEMS AT USER LOCATIONS |
| CGA P 12 : 2017 | SAFE HANDLING OF CRYOGENIC LIQUIDS |
| CGA V 7 : 2015 | STANDARD METHOD OF DETERMINING CYLINDER VALVE OUTLET CONNECTIONS FOR INDUSTRIAL GAS MIXTURES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.