• Shopping Cart
    There are no items in your cart

BS 5750-2:1987

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Quality systems Specification for production and installation

Available format(s)

Hardcopy , PDF

Superseded date

15-07-1994

Superseded by

BS EN ISO 9002:1994

Language(s)

English

Published date

01-07-1988

€140.23
Excluding VAT

National foreword
Committees responsible
Specification
0 Introduction
1 Scope and field of application
1.1 Scope
1.2 Field of application
2 References
3 Definitions
4 Quality system requirements
4.1 Management responsibility
4.2 Quality system
4.3 Contract review
4.4 Document control
4.5 Purchasing
4.6 Purchaser supplied product
4.7 Product identification and traceability
4.8 Process control
4.9 Inspection and testing
4.10 Inspection, measuring and test equipment
4.11 Inspection and test status
4.12 Control of nonconforming product
4.13 Corrective action
4.14 Handling, storage, packaging and delivery
4.15 Quality records
4.16 Internal quality audits
4.17 Training
4.18 Statistical techniques

Quality system requirements for use where a contract between two parties requires demonstration of a supplier\'s capability to control the processes that determine the acceptability of the product or service supplied.

Committee
QS/1
DevelopmentNote
BS DRAFT 93/408102 DC.
DocumentType
Standard
Pages
12
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
NFX 50 132 : 1988 Identical
ISO 9002:1994 Identical
EN 29002 : 1994 Identical

DEFSTAN 60-1(PT0)/1(1992) : 1992 CABLES, FIBRE OPTIC - GENERAL REQUIREMENTS AND TEST METHODS FOR QUALIFICATION APPROVAL AND CAPABILITY APPROVAL
DEFSTAN 61-12(PT30)/1(1987) : 1987 WIRES, CORDS, AND CABLES ELECTRICAL - METRIC UNITS - PART 30: WIRES AND CABLES, TAPED AND EXTRUDED PTFE/GLASS INSULATION, TYPES UNIFLEXEFGLAS AND UNIFLEXEFGLASMET 150 DEGREES SILVER PLATED CONDUCTORS
BS 5750-4:1990 Quality systems Guide to the use of BS 5750:Part 1 \'Specification for design/development, production, installation and servicing\', Part 2 \'Specification for production and installation\' and Part 3 \'Specification for final inspection and test\'
DEFSTAN 61-3(PT1)/4(1990) : 1990 BATTERIES, PRIMARY - GENERAL SPECIFICATION FOR BATTERIES, NON RECHARGEABLE, PRIMARY, EXCLUDING LITHIUM
DEFSTAN 61-9(PT1)/4(1993) : INTERIM GENERIC SPECIFICATION FOR BATTERIES, RECHARGEABLE, SECONDARY - PART 1: GENERAL REQUIREMENTS
DEFSTAN 61-3/5(1992) : INTERIM GENERIC SPECIFICATION FOR BATTERIES, NON RECHARGEABLE, PRIMARY
ENA TS 66-3 : ISSUE 1 1989 CARBON STEEL CASTINGS FOR STEAM TURBINES
ENA TS 66-2 : ISSUE 1 1989 2.25 CHROMIUM, MOLYBDENUM, STEEL CASTINGS FOR STEAM TURBINES
ENA TS 66-1 : ISSUE 2 1989 0.5 CHROMIUM, MOLYBDENUM, VANADIUM STEEL CASTINGS FOR STEAM TURBINES
DEFSTAN 61-12(PT9)/3(1990) : 1990 WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS, CABLES, RADIO FREQUENCY INCLUDING LIMITED FIRE HAZARD (LFH) VARIANTS
BS 4483:1985 Specification for steel fabric for the reinforcement of concrete
BS 5892-3:1982 Railway rolling stock material (metric) Specification for monobloc wheels for traction and trailing stock
BS 302-2:1987 Stranded steel wire ropes Specification for ropes for general purposes
BS 7456:1991 Code of practice for stabilization and thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with polyurethane (PUR) foam systems
PD 3542:1991 The role of standards in company quality management
BS 8202-2:1992 Coatings for fire protection of building elements Code of practice for the use of intumescent coating systems to metallic substrates for providing fire resistance
BS EN 1283:1996 Haemodialysers, haemodiafilters, haemofilters, haemoconcentrators and their extracorporeal circuits
BS 3858:1992 Specification for binding and identification sleeves for use on electric cables and wires
BS 302-5:1987 Stranded steel wire ropes Specification for ropes for hauling purposes
BS 3059-1:1987 Steel boiler and superheater tubes Specification for low tensile carbon steel tubes without specified elevated temperature properties
BS 6001-3:1993 Sampling procedures for inspection by attributes Specification for skip-lot procedures
BS 7295-1:1990 Fusion bonded epoxy coated carbon steel bars for the reinforcement of concrete Specification for coated bars
BS EN 2000:1992 Quality assurance. EN aerospace products. Approval of the quality system of manufacturers
BS 65:1991 Specification for vitrified clay pipes, fittings and ducts, also flexible mechanical joints for use solely with surface water pipes and fittings
BS 4A 100:2003 Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa
BS 7159:1989 Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems for individual plants or sites
BS 5892-4:1992 Railway rolling stock materials Specification for forged and rolled tyres
BS 12:1989 Specification for Portland cements
BS 302-6:1987 Stranded steel wire ropes Specification for ropes for mine hoisting
BS 1894:1992 Specification for design and manufacture of electric boilers of welded construction
BS 3604-1:1990 Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties Specification for seamless and electric resistance welded tubes
BS 6730:1986 Specification for black polyethylene pipes up to nominal size 63 for above ground use for cold potable water
BS 5882:1990 Specification for a total quality assurance programme for nuclear installations
SAEITC TS137-4 TS137 Technical Specification for Self Retaining \"Impedance Type\" Bolt - Imperial Tensile Strength 1275 MPa (185,000 lbf/in²) at Ambient Temperature 1065 MPa (154,000 lbf/in² at 425°C
BS 669-1:1989 Flexible hoses, end fittings and sockets for gas burning appliances Specification for strip-wound metallic flexible hoses, covers, end fittings and sockets for domestic appliances burning 1st and 2nd family gases
BS 2838-2:1991 Examination and general treatment couches Specification for variable height couches
BS 2494:1990 Specification for elastomeric seals for joints in pipework and pipelines
BS 5892-3(1992) : 1992 RAILWAY ROLLING STOCK MATERIALS - PART 3: SPECIFICATION FOR MONOBLOC WHEELS FOR TRACTION AND TRAILING STOCK
BS 4886:1988 Specification for hospital bedsteads
BS 302-1:1987 Stranded steel wire ropes Specification for general requirements
BS 4778-2:1991 Quality vocabulary Quality concepts and related definitions
BS 2745-2:1993 Washer-disinfectors for medical purposes Specification for human waste container washer-disinfectors
BS 5892-1(1992) : 1992 RAILWAY ROLLING STOCK MATERIALS - PART 1: SPECIFICATION FOR AXLES FOR TRACTION AND TRAILING STOCK
BS 4881:1993 Specification for polypropylene film cords, lines and twines
BS 5750-3:1987 Quality systems Specification for final inspection and test
BS 2745-3:1993 Washer-disinfectors for medical purposes Specification for washer-disinfectors except those used for processing human-waste containers and laundry
BS 47-1:1991 Fishplates for railway rails Specification for rolled steel fishplates
BS EN 124:1994 Gully tops and manhole tops for vehicular and pedestrian areas. Design requirements, type testing, marking, quality control
BS 6910-1:1988 Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Specification for materials
BS 6501-1:1991 Flexible metallic hose assemblies Specification for corrugated hose assemblies
BS 3059-2:1990 Steel boiler and superheater tubes Specification for carbon, alloy and austenitic stainless steel tubes with specified elevated temperature properties
BS 7669-3:1994 Vehicle restraint systems Guide to the installation, inspection and repair of safety fences
BS 7158:1989 Specification for plastics inspection chambers for drains
BS 302-3:1987 Stranded steel wire ropes Specification for zinc coated ropes for ships
BS 7850-1:1992 Total quality management Guide to management principles
BS 302-4:1987 Stranded steel wire ropes Specification for ropes for lifts
BS EN 928:1996 Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for in vitro diagnostic medical devices
BS EN 724:1995 Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for non-active medical devices
BS 6744:1986 Specification for austenitic stainless steel bars for the reinforcement of concrete
BS 5750-1:1987 Quality systems Specification for design/development, production, installation and servicing
BS 2W 12:1989 Specification for preformed zinc coated carbon steel wire rope (metric and inch series)
BS 0-3:1991 A standard for standards Guide to drafting and presentation of British Standards
BS 1765-1:1990 Hospital bedside lockers. Specification for general purpose bedside lockers for patients
BS 5750-5:1981 Quality systems Guide to the use of BS 5750:Part 2 \'Specification for manufacture and installation\'
BS QC 001002:1991 Rules of procedure of the IEC quality assessment system for electronic components (IECQ)
BS 6200-2.2:1993 Sampling and analysis of iron, steel and other ferrous metals. Sampling and sample preparation Methods for ferroalloys and other alloying additives
BS 1503:1989 Specification for steel forgings for pressure purposes
SAEITC TS135-2 TS135 Technical Specification for All Metal Self-Locking Nuts (MJ Threads Reduced Hexagon - Deep Counterbored Tensile Strength:- 1100 MPa at Ambient Temperature
BS 6501-2:1991 Flexible metallic hose assemblies Specification for strip wound hoses and hose assemblies
BS 5892-2:1992 Railway rolling stock materials Specification for forged and rolled wheel centres
BS 9000-4:1991 General requirements for a system for electronic components of assessed quality Specification of procedures for the approval of an organization
BS 3604-2:1991 Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties. Specification for longitudinally arc welded tubes
BS EN 30011-1:1993 Guidelines for auditing quality systems Guidelines for auditing quality systems. Auditing
BS 3602-2:1991 Specification for steel pipes and tubes for pressure purposes: carbon and carbon manganese steel with specified elevated temperature properties Specification for longitudinally arc welded tubes
BS 65:1988 Specification for vitrified clay pipes, fittings, joints and ducts
BS 5892-1:1983 Railway rolling stock material (metric) Specification for axles for traction and trailing stock
BS 1723-3:1988 Brazing Methods for non-destructive and destructive testing
BS 3843-3:1992 Guide to terotechnology (the economic management of assets) Guide to the available techniques
BS 6200-2.1:1993 Sampling and analysis of iron, steel and other ferrous metals. Sampling and sample preparation Methods for iron and steel
BS 2838-1:1988 Examination and general treatment couches. Specification for fixed height couches
BS 4940-2:1994 Technical information on construction products and services Guide to content and arrangement
BS 6910-2:1989 Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Code of practice for on-site installation
BS 5480:1990 Specification for glass reinforced plastics (GRP) pipes, joints and fittings for use for water supply or sewerage
SAEITC TS134-4 TS134 Technical Specification for Self-Retaining \"Impedance Type\" Bolts - Metric Tensile Strength: 1275 MPa at Ambient Temperature 1065 MPa at 425°c
BS 64:1992 Specification for normal and high strength steel bolts and nuts for railway rail fishplates
BS 3A 100:1991 Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa
BS 6572:1985 Specification for blue polyethylene pipes up to nominal size 63 for below ground use for potable water
BS 7727:1994 Code of practice for installation and inspection of pre-insulated compression terminals and connectors for cables with copper conductors up to 6 mm<sup>2</sup>
BS 7336:1990 Specification for polyethylene fusion fittings with integral heating element(s) for use with polyethylene pipes for the conveyance of gaseous fuels
BS 751:1992 Specification for steel baseplates for flat bottom railway rails
BS 4466:1989 Specification for scheduling, dimensioning, bending and cutting of steel reinforcement for concrete
BS 4772:1988 Specification for ductile iron pipes and fittings
BS 3605-1:1991 Austenitic stainless steel pipes and tubes for pressure purposes Specification for seamless tubes
BS 6143:1981 Guide to the determination and use of quality related costs
BS 1506:1990 Specification for carbon, low alloy and stainless steel bars and billets for bolting material to be used in pressure retaining applications

ISO 8402:1994 Quality management and quality assurance — Vocabulary
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.